portBsciAdminEntry

NETLINK-SPECIFIC-MIB · .1.3.6.1.4.1.173.7.3.4.1.1
MIB view Table view

Object

row mandatory 
A BSCI Interactive Port entry containing objects
relating to the port that are configurable by the user.

Context

MIB
NETLINK-SPECIFIC-MIB
OID
.1.3.6.1.4.1.173.7.3.4.1.1
Type
row
Status
mandatory
Parent
portBsciAdminTable
Table
portBsciAdminTable
Children
30

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects
ObjectTypeSyntaxOID
portBsciAdminBlockedFlag mandatory
Causes the port to be enabled or disabled at node IPL.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.1
portBsciAdminUseEBCDIC mandatory
Specifies whether all devices on a line use the same character set for successive session polls.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.10
portBsciAdminCallInfoInRequestPacket mandatory
Specifies whether the user will have the option of including call information in a call request packet.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.11
portBsciAdminClearVCOnLastDeviceDown mandatory
Causes the virtual circuit to be cleared when no terminals are using it.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.12
portBsciAdminTransTextSupported mandatory
Causes all characters transmitted to be treated as data.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.13
portBsciAdminEndToEndAck mandatory
Allows management of acknowledgments end to end across the network rather than locally at each end.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.14
portBsciAdminFullDuplex mandatory
Specifies full-duplex transmission.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.15
portBsciAdminMultidrop mandatory
Specifies whether transmission will be multidrop.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.16
portBsciAdminSlowPollRetryCount mandatory
Specifies how many times the control unit will be polled before it is put on the slow poll list.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.17
portBsciAdminSlowPollRetryFreq mandatory
Specifies the number of times active control units will be polled between pollings on the slow poll list.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.18
portBsciAdminStartSynchChars mandatory
Specifies the number of synchronization characters that will be added to the beginning of each frame.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.19
portBsciAdminConnector mandatory
Physical port interface connector type.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.2
portBsciAdminEndPadChars mandatory
Specifies the number of padding characters that will be added to the end of each frame.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.20
portBsciAdminPollInterval mandatory
Specifies the time between passes through the polling list.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.21
portBsciAdminNoResponseTimer mandatory
Activated after transmission of a general poll or a data frame.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.22
portBsciAdminNoResponseRetryCount mandatory
Specifies how many times the user device will be polled before control is passed on the next cluster.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.23
portBsciAdminErrorRetransmitCount mandatory
Specifies the number of times the Netlink device will resend a block of data after the receiving device has detected an error in that block.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.24
portBsciAdminNAKRetryCount mandatory
Specifies the number of times the Netlink device will send a frame when the receiving device is unable to acknowledge.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.25
portBsciAdminBlockCheck mandatory
Sets the redundancy check parameter.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.26
portBsciAdminDataMode mandatory
Sets the parity parameter.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.27
portBsciAdminRowStatus mandatory
This variable is used to manage the creation and deletion of conceptual rows in the portBsciAdminTable and follows the SNMPv2 RowStatus conventions by supporting the following val…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.173.7.3.4.1.1.28
portBsciAdminAnswerNonConfigured mandatory
Only valid if pad type is HPAD. If yes, the HPAD will respond to all devices on the line. If no, the HPAD will respond only to those devices that are configured on the node.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.29
portBsciAdminSpeed mandatory
Data transmission rate in bits per second.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.3
portBsciAdminActivateConnectionWithoutPoll mandatory
Only valid if pad type is TPAD. If yes, will active the TPAD connection without a poll of the connected device.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.30
portBsciAdminRetransmitInterval mandatory
Length of time before the node will transmit an I-frame if the previous transmission is not acknowledged.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.4
portBsciAdminMAXRetransmits mandatory
Maximum number of times the node will attempt to send an I-frame after a retransmission period expiration.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.5
portBsciAdminMaxBytesPerFrame mandatory
Maximum frame size that will be transmitted on the port.
columnInteger32.1.3.6.1.4.1.173.7.3.4.1.1.6
portBsciAdminGenerateClock mandatory
Specifies whether the port will generate the clock necessary to synchronize traffic over the link.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.7
portBsciAdminRcvClockFromDTE mandatory
Allows the clock to be looped back from the DTE using the TT (Terminal Timing) signal.
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.8
portBsciAdminPadType mandatory
BSCI Pad Type
columnEnumeration.1.3.6.1.4.1.173.7.3.4.1.1.9
Indexes
ObjectTypeSyntaxOID
nlIfRlp mandatory
The RLP number on the node. RLP numbers 1-8 are Physical RLP cards, and RLP number 250, 251 and 252 define IP, IPX and LLC2 interfaces respectively.
columnInteger32.1.3.6.1.4.1.173.7.4.1.1.1
nlIfPort mandatory
The Port number on the RLP. Port numbers 1-8 are known to be physical ports, and 9-64 are logical ports. If the RLP number identifies an IP, IPX or LLC2 interface, then the port …
columnInteger32.1.3.6.1.4.1.173.7.4.1.1.2