portVoiceAdminTETimer
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.3.8.1.1.7
Object
column
mandatory
r/w
Integer32
The delay at which the E&M 'E' lead follows the 'M' lead.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.3.8.1.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- portVoiceAdminEntry
- Table
- portVoiceAdminTable
- Siblings
- 34
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portVoiceAdminRlpIndex mandatory The RLP number of the Voice port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.1 |
| portVoiceAdminCallTimer mandatory The amount of time the node will wait for a response to a
Call Connect or Call Clear request. When the node issues a
request, it will set a timer to the value configured here.
If … | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.10 |
| portVoiceAdminHuntGroup mandatory The hunt group that includes the voice channel. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.11 |
| portVoiceAdminLongDialPrefix mandatory The character that will be required preceeding calls using
the long call format. When the user at an attached device
dials a long form number, it must be preceeded by the prefix
c… | column | OctetString | .1.3.6.1.4.1.173.7.3.8.1.1.12 |
| portVoiceAdminSLTTimeout mandatory The time the local port will wait before an actual fax
transmission begins. If there is no fax tone when this
timer expires, the connection will be terminated. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.13 |
| portVoiceAdminLinkDownBusy mandatory This flag enables or disables automatic busy-out of
channels when the link is down. When enabled, the system
will automatically busy-out channels when the composite
link is down. … | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.14 |
| portVoiceAdminFaxSupported mandatory The flag to indicate whether or not faxes will be
transmitted on the port. If no, all calls will be treated
as voice. If yes, both voice and fax will be transmitted. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.15 |
| portVoiceAdminTelephonyType mandatory The type of interface (in conjunction with the
Interface Type) that will be used by the Voice channel.
This requires rebooting for the change to take effect.
Telephony Type In… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.16 |
| portVoiceAdminJitter mandatory The amount of jitter delay. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.17 |
| portVoiceAdminSampleDelay mandatory The amount of sample delay. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.18 |
| portVoiceAdminDialTimer mandatory The delay the node will use to determine when variable
length dialing is complete. (Variable length dialing allows
the user to place a call without entering the configured
number … | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.19 |
| portVoiceAdminPortIndex mandatory The Port number of the Voice port. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.2 |
| portVoiceAdminAutoDial mandatory The flag to enable or disable the auto dial feature. Note
that enabling this feature will disable the variable length
dialing feature for this channel. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.20 |
| portVoiceAdminSuppression mandatory The silence suppression level. A larger silence suppression
level allows more data channels to operate simultaneously
with the voice channels. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.21 |
| portVoiceAdminAutoDialNumber mandatory The number to which the node will attempt to connect when
the handset attached to this port is taken off-hook. This
is applicable only when the Auto Dial feature is enabled. | column | OctetString | .1.3.6.1.4.1.173.7.3.8.1.1.22 |
| portVoiceAdminAutoPoll mandatory The flag to enable or disable auto polling. This is
applicable only when the Auto Dial feature is enabled.
When enabled, the node periodically polls the destination.
If the poll i… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.23 |
| portVoiceAdminAutoPollTimer mandatory The frequency with which an Auto Poll will be sent. This
is applicable only when auto poll is enabled. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.24 |
| portVoiceAdminExtDigitsSource mandatory The source of the extended digits when the user of
attached equipment dials a speed dial number. This is
applicable only when the number of extended dial digits
is greater than ze… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.25 |
| portVoiceAdminNumDigitsDelete mandatory The number of leading dial digits that will be deleted
before a dial string is forwarded. This is primarily used
to delete leading dial digits that may be inserted by an
attached … | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.26 |
| portVoiceAdminForwardDelay mandatory The length of a pause that can be inserted in an extended
dial string that is being forwarded. This is applicable only
when forwarded output digits is all or extended. When a comm… | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.27 |
| portVoiceAdminForwardedType mandatory The method how the dial digits will be forwarded. This
is applicable only when forwarded output digits is all
or extended. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.28 |
| portVoiceAdminForwardedDigits mandatory The flag indicating which dial digits, if any, to forward.
If none, dial digits are not forwarded to the destination
device when a call is initiated on this channel. If all,
the d… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.29 |
| portVoiceAdminBlockedFlag mandatory The flag which causes the port to be enabled or disabled
at node IPL. The port will remain in that state until this
flag is changed and the node is rebooted, or until an on-
line … | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.3 |
| portVoiceAdminMakeRatio mandatory The make ratio of each digit pulse that is forwarded.
This is applicable only when forwarded output digits
is all or extended and forwarded digit type is pulse. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.30 |
| portVoiceAdminBreakRatio mandatory The break ratio of each digit pulse that is forwarded.
This is applicable only when forwarded output digits
is all or extended and forwarded digit type is pulse. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.31 |
| portVoiceAdminDTMFOnDuration mandatory The length of a tone that will be used to produce a
single DTMF digit. This is applicable only when forwarded
output digits is all or extended and forwarded digit type
is DTMF. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.32 |
| portVoiceAdminDTMFOffDuration mandatory The length of silence between DTMF tones in a dial digit
string. This is applicable only when forwarded output digits
is all or extended and forwarded digit type is DTMF. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.33 |
| portVoiceAdminToneType mandatory The tone type to detect/regenerate for forwarding DTMF/MF. | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.34 |
| portVoiceAdminRowStatus mandatory This variable is used to manage the creation and deletion
of conceptual rows in the portVoiceAdminTable and follows the
SNMPv2 RowStatus conventions by supporting the following va… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.173.7.3.8.1.1.35 |
| portVoiceAdminSpeed mandatory The speed of the port which is transmitted as part
of a Call Setup frame. A Voice call will be established
if there is enough bandwidth at each end to provide the
minimum configur… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.4 |
| portVoiceAdminDTMF mandatory The flag to enable, disable, or specify a time span
over which DTMF (Dual Tone Multi Frequency) tones will
be regenerated.
0 = pass tones transparently to the remote device.
1… | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.5 |
| portVoiceAdminInterface mandatory The type of interface (in conjunction with the Telephony
Interface Type) that will be used by the Voice channel.
This requires rebooting for the change to take effect.
Telephony T… | column | Enumeration | .1.3.6.1.4.1.173.7.3.8.1.1.6 |
| portVoiceAdminLevelIn mandatory The local voice level into the voice port. This adjusts
the sensitivity of the local voice channel to the signal
from the attached device. The purpose of this is to match
the voic… | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.8 |
| portVoiceAdminLevelOut mandatory The local voice level out of the voice port. A more
positive setting produces a higher volume. | column | Integer32 | .1.3.6.1.4.1.173.7.3.8.1.1.9 |