portPhyX25OperSpeed
NETLINK-SPECIFIC-MIB ·
.1.3.6.1.4.1.173.7.3.1.2.1.2
Object
column
mandatory
Integer32
This object defines the speed of the X25 port. The speed may only be set to one of a series of reasonable values, and if an attempt is made to set the speed to a value which is within the valid range but not equal to one of these values, the speed will be rounded up. If the connector type of the port is RS232, the port could be a standard port or a high speed port. If the port is a high speed RS232 port, the maximum valid speed is 256000. If the port is a standard RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200 on all other products. It may be possible to set the speed of a standard RS232 port to a speed which is valid for a high speed RS232 port but invalid for a standard RS232 port. In this case, the port may not end up having the invalid speed. The default speed for a standard RS232 port on the FRX6000 is 19200.
Context
- MIB
- NETLINK-SPECIFIC-MIB
- OID
.1.3.6.1.4.1.173.7.3.1.2.1.2- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- portPhyX25OperEntry
- Table
- portPhyX25OperTable
- Siblings
- 9
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portPhyX25OperConnector mandatory Physical port interface connector type. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.2.1.1 |
| portPhyX25OperTrunkGroup mandatory This variable contains a string of 8 bytes, with each
byte indicating a port on this RLP that may be a part of
a trunk group. | column | OctetString | .1.3.6.1.4.1.173.7.3.1.2.1.10 |
| portPhyX25OperGenerateClock mandatory Specifies whether the port will generate the clock
necessary to synchronize traffic over the link. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.2.1.3 |
| portPhyX25OperRcvClockFromDTE mandatory This object defines whether the receive clock will be
used from the DTE. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.2.1.4 |
| portPhyX25OperDialOut mandatory This flag indicates whether the port is connected to a dial
modem, and whethter connections will be initiated through
dial-in or dial-out calls. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.2.1.5 |
| portPhyX25OperInactivityTimer mandatory This timer defines in minutes, the period of inactivity
allowed between calls. Once the timer expires, the port
is disabled untill the next call is placed, if a Dial out
port, or … | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.2.1.6 |
| portPhyX25OperDisconnectTimer mandatory This timer defines, in seconds, the length of time a
dial-in port will remain disabled after expiration of the
InActivity Timer. | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.2.1.7 |
| portPhyX25OperSetupTimer mandatory This timer determines the length of time, in seconds, that
a response must be received by the port, after entering the
Linkup state. If a response is not received, the port enter… | column | Integer32 | .1.3.6.1.4.1.173.7.3.1.2.1.8 |
| portPhyX25OperTrunkFlag mandatory This flag, when set, indicates the port is associated
with a network trunk group. It will be disabled/enabled
if the network trunk is not operational. | column | Enumeration | .1.3.6.1.4.1.173.7.3.1.2.1.9 |