portSdlcAdminSpeed

NETLINK-SPECIFIC-MIB · .1.3.6.1.4.1.173.7.3.5.1.1.12
MIB view Table view

Object

column mandatory r/w Integer32 
This object defines the speed of the SDLC port.  The speed may
only be set to one of a series of reasonable values, and if an attempt is made 
to set the speed to a value which is within the valid range but not equal to one 
of these values, the speed will be rounded up.  If the connector type of the port 
is RS232, the port could be a standard port or a high speed port.  If the port is 
a high speed RS232 port, the maximum valid speed is 256000.  If the port is a standard 
RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200
on all other products.  It may be possible to set the speed of a standard RS232 port 
to a speed which is valid for a high speed RS232 port but invalid for a standard 
RS232 port. In this case, the port may not end up having the invalid speed.  The default
speed for a standard RS232 port on the FRX6000 is 19200.

Context

MIB
NETLINK-SPECIFIC-MIB
OID
.1.3.6.1.4.1.173.7.3.5.1.1.12
Type
column
Access
readwrite
Status
mandatory
Parent
portSdlcAdminEntry
Table
portSdlcAdminTable
Siblings
15

Syntax

Integer32

Values & Constraints

Object Constraints
range: 75-2048000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
portSdlcAdminCommit obsolete
Writing a value to this object commits the the SDLC port related modified configuration values to the database.
columnInteger32.1.3.6.1.4.1.173.7.3.5.1.1.1
portSdlcAdminLPDASupport mandatory
This object defines the type LPDA support on SDLC port.
columnEnumeration.1.3.6.1.4.1.173.7.3.5.1.1.10
portSdlcAdminConnector mandatory
This object defines the connector type of the SDLC port.
columnEnumeration.1.3.6.1.4.1.173.7.3.5.1.1.11
portSdlcAdminRowStatus mandatory
This variable is used to manage the creation and deletion of conceptual rows in the portSdlcAdminTable and follows the SNMPv2 RowStatus conventions by supporting the following val…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.173.7.3.5.1.1.13
portSdlcAdminIdleFillChar mandatory
This object specifies a character that wll be inserted into the stream when the SNA link is idle.
columnEnumeration.1.3.6.1.4.1.173.7.3.5.1.1.14
portSdlcAdminInactivityTimer mandatory
This object determines how long the node will wait with no activity on the port before it will declare the attached device down.
columnInteger32.1.3.6.1.4.1.173.7.3.5.1.1.15
portSdlcAdminL1Duplex mandatory
This object determines whether level-1 (physical layer) transmission can be in one (half duplex) or both (full duplex) directions at once.
columnEnumeration.1.3.6.1.4.1.173.7.3.5.1.1.16
portSdlcAdminMAXRetries mandatory
This object defines the max. number of retries to a non-responding Link station, before putting the Link station to slow-poll list if it is not Normal response Mode OR disconnecti…
columnInteger32.1.3.6.1.4.1.173.7.3.5.1.1.2
portSdlcAdminMAXOut mandatory
This object defines the number of outstanding frames for triggering window full condition.
columnInteger32.1.3.6.1.4.1.173.7.3.5.1.1.3
portSdlcAdminPadType mandatory
This object defines the SNA PAD types.
columnEnumeration.1.3.6.1.4.1.173.7.3.5.1.1.4
portSdlcAdminGenerateClock mandatory
This object defines if the port would generate clock.
columnEnumeration.1.3.6.1.4.1.173.7.3.5.1.1.5
portSdlcAdminRcvClockFromDTE mandatory
This object defines if the rcv clock will be used from DTE.
columnEnumeration.1.3.6.1.4.1.173.7.3.5.1.1.6
portSdlcAdminNrz mandatory
This object defines the data encoding at the physical layer
columnEnumeration.1.3.6.1.4.1.173.7.3.5.1.1.7
portSdlcAdminPacketSize mandatory
This object defines the packet size of the X25 layer used by SNA PAD
columnInteger32.1.3.6.1.4.1.173.7.3.5.1.1.8
portSdlcAdminDisableRequestDisconnect mandatory
This object defines if a Request To Disconnect(RD) will be sent when remote PAD clear the connection
columnEnumeration.1.3.6.1.4.1.173.7.3.5.1.1.9