TIMETRA-PORT-MIB Table View

The port table has an entry for each port on each IOM card in each
chassis in the TMNX system.

tmnxPortEntry row .1.3.6.1.4.1.6527.3.1.2.2.4.2.1

Each row entry represents a port on a IOM card in a chassis in the
system. Entries cannot be created and deleted via SNMP SET
operations. Before an IOM tmnxMDAEntry can be deleted from the
tmnxMDATable, its supported …

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex tmnxPortPortID

Column	Syntax	OID
tmnxPortPortID tmnxPortPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table.	TIMETRA-TC-MIBTmnxPortID Description: A portid is a unique 32 bit number with special encoding. Refer to TIMETRA-CHASSIS-MIB::tmnxChassisPortIdScheme for a description of the various port mapping schemes used by the system for physical ports and …	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.1
tmnxPortLastChangeTime The tmnxPortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxPortEntry row for this port.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.2
tmnxPortType The type of port or optical pack installed.	TmnxPortType Description: TmnxPortType is an index into the tmnxPortTypeTable used to identify a specific type of hardware port.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.3
tmnxPortClass The class of port or optical pack installed. This can be derived from tmnxPortType.	TmnxPortClass Type Values: 1 none 2 faste 3 gige 4 xgige 5 sonet 6 vport 8 xcme 9 tdm 10 xlgige 11 cgige 13 gnss 14 vspeede 17 serial 18 wireless 19 connector 20 xxvgige 21 cdgige 22 flexmbr 23 flex 24 lgige 25 terabite 26 anchor Description: The TmnxPortClass data type is an enumerated integer that describes the values used to identify the class of interface provided by this port.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.4
tmnxPortDescription A textual string containing user supplied information about the interface.	TIMETRA-TC-MIBTItemVeryLongDescriptionr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Longer description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.5
tmnxPortName The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might …	TIMETRA-TC-MIBTNamedItemOrEmpty Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.6
tmnxPortAlias This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of tmnxPor…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.7
tmnxPortUserAssignedMac When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac is set to 'false', tmnxPortMacAddress returns the sys…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.8
tmnxPortMacAddress When tmnxPortUserAssignedMac has a value of 'true', tmnxPortMacAddress has the value that has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac has a value of 'false', tmnxPortMacAddress retu…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.9
tmnxPortHwMacAddress The interface's hardware or system assigned MAC address at its protocol sub-layer. When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress is used instead of tmnxPortHwMacAddress. …	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.10
tmnxPortMode The tmnxPortMode variable indicates if the interface on this port is configured as a service access port, a network port or a hybrid port. Once the port's mode has been configured for 'access', 'network' or 'hybrid' mo…	Enumerationr/w Enumerated Values: 0 undefined 1 access 2 network 3 hybrid	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.11
tmnxPortEncapType The value of tmnxPortEncapType specifies the type of encapsulation protocol configured on this port's network interface. tmnxPortEncapType is set to 'unknown' for physical SONET/SDH and TDM ports. …	TmnxPortEncapTyper/w Type Values: 0 unknown 1 nullEncap 2 qEncap 3 mplsEncap 4 bcpNullEncap 5 bcpDot1qEncap 6 ipcpEncap 7 frEncap 8 pppAutoEncap 9 atmEncap 10 qinqEncap 11 wanMirrorEncap 12 ciscoHDLCEncap 13 cemEncap 14 reserved14 15 rawEncap 16 cellularEncap 17 wlanEncap Description: The type of encapsulation protocol configured on a port's network interface. When the encap type has a value of 'nullEncap', frames received will not carry any tags or labels and as a result only one service …	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.12
tmnxPortLagId The value of tmnxPortLagId specifies which LAG or multi-link trunk (MLT) this port is assigned to. If this port is not associated with any LAG, this value will be set to zero(0). The maximum value of this…	Unsigned32r/w Constraints: range: 0-864	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.13
tmnxPortHoldTimeUp The value of tmnxPortHoldTimeUp is used to configure the hold-timer for link up event dampening. A value of zero (0) indicates that an up transition is reported immediately. The value of tmnxPortHoldTime…	TmnxHoldTimer/w Constraints: range: 0-3600000 Description: The TmnxHoldTime specifies the hold-timer for link up/down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface t…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.14
tmnxPortHoldTimeDown The value of tmnxPortHoldTimeDown is used to configure the hold-timer for link down event dampening. A value of zero (0) indicates that a down transition is reported immediately. The value of tmnxPortHold…	TmnxHoldTimer/w Constraints: range: 0-3600000 Description: The TmnxHoldTime specifies the hold-timer for link up/down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface t…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.15
tmnxPortUpProtocols The tmnxPortUpProtocols variable is a bitmap that indicates what protocols can be used on this port type.	Bits Enumerated Values: 0 portUpIpv4 1 portUpMpls 2 portUpBcp 3 portUpIso 4 portUpFr 5 portUpAtm 6 portUpChdlc 7 portUpIma 8 portUpIpv6	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.16
tmnxPortConnectorType The type of connector installed on this port.	TmnxPortConnectorType Description: TmnxPortConnectorType is an index into the tmnxPortConnectTypeTable used to identify a specific type of port connector.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.17
tmnxPortTransceiverType Type of the transceiver.	Enumeration Enumerated Values: 0 unknown 1 gbic 2 moduleConnectorSolderedToMotherboard 3 sfpTransceiver 4 xbiTransceiver 5 xenpakTransceiver 6 xfpTransceiver 7 xffTransceiver 8 xfpeTransceiver 9 xpakTransceiver 10 x2Transceiver 11 dwdmSfpTransceiver 12 qsfpTransceiver 13 qsfpPlusTransceiver 14 cfpTransceiver 15 cxpTransceiver 16 oifMsa100gLh 17 cfp2OrQsfp28Transceiver 18 cfp4Transceiver 19 cdfpTransceiver 20 cfp2AcoTransceiver 21 cfp8Transceiver 22 cdfp3Transceiver 23 microQsfpTransceiver 24 qsfpDdTransceiver 25 cfp2DcoTransceiver 26 sfpDdTransceiver 27 dsfpTransceiver 28 x4MiniLinkTransceiver 29 x8MiniLinkTransceiver 30 qsfpPlusOrLaterWithCmisTransceiver 31 sfpDdWithCmisTransceiver 32 sfpPlusOrLaterWithCmisTransceiver 33 osfpXdWithCmisTransceiver 34 oifElsfpwihCmisTransceiver 35 cdfpX4WithCmisTransceiver 36 cdfpX8WithCmisTransceiver 37 cdfpX16WithCmisTransceiver	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.25
tmnxPortTransceiverCodeobsolete The code for the transmission media. tmnxPortOpticalCompliance is used instead of tmnxPortTransceiverCode.tmnxPortOpticalCompliance contains the same information and is defined by an industry standard.	Bits Enumerated Values: 0 unknown 1 oc48-longreach 2 oc48-intermediatereach 3 oc48-shortreach 4 oc12-singlemodelongreach 5 oc12-singlemodeinterreach 6 oc12-multimodeshortreach 7 oc3-singlemodelongreach 8 oc3-singlemodeinterreach 9 oc3-multi-modeshortreach 10 gige-1000base-t 11 gige-1000base-cx 12 gige-1000base-lx 13 gige-1000base-sx 14 faste-100base-mm-fx 15 faste-100base-sm-fx 16 xgige-10gbase-sr 17 xgige-10gbase-lr 18 xgige-10gbase-er 19 xgige-10gbase-sw 20 xgige-10gbase-lw 21 xgige-10gbase-ew	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.26
tmnxPortTransceiverLaserWaveLen The light wavelength transmitted by the transceiver's laser. A value of zero indicates that the port is not equipped with the transceiver. A value in the range of 1 to 2000 indicates that the units are in…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.27
tmnxPortTransceiverDiagCapable Indicates if the transceiver is capable of doing diagnostics.	Enumeration Enumerated Values: 0 notApplicable 1 true 2 false	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.28
tmnxPortTransceiverModelNumber The value of tmnxPortTransceiverModelNumber indicates the model information for the transceiver, as read from the transceiver EEPROM. For example, the string may contain the Nokia part number and CLEI for the transceiv…	TIMETRA-TC-MIBTNamedItemOrEmpty Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.29
tmnxPortSFPConnectorCode The external connector provided on the interface.	Enumeration Enumerated Values: 0 unknown 1 sc 2 fiberChannel-Style1-CopperConnector 3 fiberChannel-Style2-CopperConnector 4 bncortnc 5 fiberChannelCoaxialHeaders 6 fiberJack 7 lc 8 mt-rj 9 mu 10 sg 11 opticalPigtail 12 mpo1x12 13 mpo2x16 32 hssdcII 33 copperPigtail 34 rj45 35 noSepConn 36 mxc2x16 37 cs 38 snOptConn 39 mpo2x12 40 mpo1x16 51 opticalTransceiver 128 copperGigE 129 rjp5	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.30
tmnxPortSFPVendorOUI The vendor organizationally unique identifier field (OUI) contains the IEEE company identifier for the vendor. A value of all zero indicates that the vendor OUI is unspecified.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.31
tmnxPortSFPVendorManufactureDate The vendor's date code.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.32
tmnxPortSFPMedia The value of tmnxPortSFPMedia indicates the media supported for the SFF (Small Form Factor).	Enumeration Enumerated Values: 0 notApplicable 1 ethernet 2 sonetsdh	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.33
tmnxPortSFPEquipped The value of tmnxPortSFPEquipped indicates if the SFF is equipped.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.34
tmnxPortEquipped Indicates if there is an optics pack installed in this port or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.35
tmnxPortLinkStatus Indicates whether or not the port has a physical link.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.36
tmnxPortAdminStatus The desired administrative status of this port. When tmnxPortType references a row in the tmnxPortTypeTable where tmnxPortTypeName is the octet string 'Application Assurance', an attempt to set tmnxPortAd…	TIMETRA-CHASSIS-MIBTmnxPortAdminStatusr/w Type Values: 1 noop 2 inService 3 outOfService 4 diagnose Description: The desired administrative status of this port.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.37
tmnxPortOperStatus The current operational status of this port.	TmnxPortOperStatus Type Values: 1 unknown 2 inService 3 outOfService 4 diagnosing 5 failed Description: The current operational status of this port.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.38
tmnxPortState The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This sta…	TmnxPortState Type Values: 1 none 2 ghost 3 linkDown 4 linkUp 5 up 6 diagnose Description: The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This sta…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.39
tmnxPortPrevState The tmnxPortPrevState indicates the state level that the port transitioned from into the current tmnxPortState level.	TmnxPortState Type Values: 1 none 2 ghost 3 linkDown 4 linkUp 5 up 6 diagnose Description: The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This sta…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.40
tmnxPortNumAlarms The number of alarms currently outstanding on this port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.41
tmnxPortAlarmState The value of tmnxPortAlarmState indicates the current alarm state for this port.	TIMETRA-CHASSIS-MIBTmnxAlarmState Type Values: 0 unknown 1 alarmActive 2 alarmCleared Description: The TmnxAlarmState is an enumerated integer whose value indicates the current alarm state of a physical or logical component in the Nokia SROS series system.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.42
tmnxPortLastAlarmEvent The value of tmnxPortLastAlarmEvent indicates the object name and instance value that points to the row entry in the ALARM-MIB containing the most recent alarm associated with this port. If tmnxPortAlarmState has a val…	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.43
tmnxPortClearAlarms Setting this action variable causes all the alarms associated with this port to be moved from the current alarm log to the history alarm log. Primarily meant for use in development. This object will most likely be remo…	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable Description: The TmnxActionType data type is an enumerated integer that describes the values used to support action or operation style commands. Setting a variable of this type to 'doAction' causes the action to occur. GETs and GE…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.44
tmnxPortSFPVendorSerialNum The value of tmnxPortSFPVendorSerialNum indicates the transceiver's vendor serial number in ASCII characters, as read from the transceiver EEPROM. An empty string indicates the vendor serial number is uns…	TIMETRA-TC-MIBTNamedItemOrEmpty Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.45
tmnxPortSFPVendorPartNum The value of tmnxPortSFPVendorPartNum indicates the transceiver's vendor part number (or product name) in ASCII characters, as read from the transceiver EEPROM. An empty string indicates the vendor part n…	TIMETRA-TC-MIBTNamedItemOrEmpty Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.46
tmnxPortLastStateChanged The tmnxPortLastStateChanged variable contains the value of the sysUpTime the last time the operational status of the port changed state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.48
tmnxPortNumChannels For SONET/SDH paths or TDM channels, tmnxPortNumChannels contains the number of possible immediate children. For leaf paths or channels, the value of this object will be zero. For SONET/SDH or TDM physical ports, tmnxPo…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.49
tmnxPortNetworkEgrQueues tmnxPortNetworkEgrQueues contains the network egress queue policy if the tmnxPortMode is network. Otherwise this object has no significance.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.50
tmnxPortBundleNumberobsolete tmnxPortBundleNumber identifies the bundle for which this port is a member. If this port is not a member of any bundle, the value of tmnxPortBundleNumber will be zero.	Integer32 Constraints: range: 0-2000	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.51
tmnxPortIsLeaf tmnxPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM' bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. When the value of this object is 'true', it indicates that the channel is capable of passing t…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.52
tmnxPortChanType tmnxPortChanType is applicable only when the 'isSonet' and/or 'isTDM' bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. It indicates the type of the channel. For ports on Ethernet MDA's, the value of this object …	TIMETRA-CHASSIS-MIBTmnxMDAChanType Type Values: 0 unknown 1 sonetSts768 2 sonetSts192 3 sonetSts48 4 sonetSts12 5 sonetSts3 6 sonetSts1 7 sdhTug3 8 sonetVtg 9 sonetVt15 10 sonetVt2 11 sonetVt3 12 sonetVt6 13 pdhTu3 14 pdhDs3 15 pdhE3 16 pdhDs1 17 pdhE1 18 pdhDs0Grp 19 reserved19 20 reserved20 21 reserved21 Description: The TmnxMDAChanType data type indicates the type of channel that can be created on an MDA.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.53
tmnxPortParentPortID tmnxPortParentPortID is applicable only when the 'isSonet' and/or 'isTDM' bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. For SONET or TDM channel, it indicates the port ID of its parent channel or port.	TIMETRA-TC-MIBTmnxPortID Description: A portid is a unique 32 bit number with special encoding. Refer to TIMETRA-CHASSIS-MIB::tmnxChassisPortIdScheme for a description of the various port mapping schemes used by the system for physical ports and …	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.54
tmnxPortOpticalCompliance The value of tmnxPortOpticalCompliance indicates the 64 bytes of optical compliance bits stored in SFF EEPROMs. tmnxPortOpticalCompliance is applicable only when the value of tmnxPortSFPEquipped is set to 'true'.	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.55
tmnxPortLoadBalanceAlgorithm The value of tmnxPortLoadBalanceAlgorithm specifies the load balancing algorithm to be used on this port. When the value is 'includeL4', the src and dst port are used in the hashing algorithm. When it's 'excludeL4', the…	Enumerationr/w Enumerated Values: 0 notApplicable 1 default 2 includeL4 3 excludeL4	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.56
tmnxPortEgrPortSchedPlcy The value of tmnxPortEgrPortSchedPlcy specifies the egress QoS port scheduler policy for this port. This object must correspond to the index of a row in TIMETRA-QOS-MIB::tPortSchedulerPlcyTable. A non-emp…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.57
tmnxPortLastClearedTime The value of tmnxPortLastClearedTime indicates the sysUpTime when the counters in the IF-MIB:ifTable were last cleared.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.58
tmnxPortIngNamedPoolPlcyobsolete The value of tmnxPortIngNamedPoolPlcy specifies a named pool policy associated with an port ingress context. The policy governs the way named pools are created at the port level. This object is obsoleted …	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.60
tmnxPortEgrNamedPoolPlcyobsolete The value of tmnxPortEgrNamedPoolPlcy specifies a named pool policy associated with an port egress context. The policy governs the way named pools are created at the port level. This object is obsoleted i…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.61
tmnxPortIngPoolPercentRate The value of tmnxPortIngPoolPercentRate specifies increment or decrement of the active bandwidth associated with the ingress port. This active bandwidth affects the amount of ingress buffer space managed by the port.	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.62
tmnxPortEgrPoolPercentRate The value of tmnxPortEgrPoolPercentRate specifies increment or decrement of the active bandwidth associated with the egress port. This active bandwidth affects the amount of egress buffer space managed by the port. …	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.63
tmnxPortDDMEventSuppression The value of tmnxPortDDMEventSuppression specifies whether or not an inserted SFF that supports Digital Diagnostic Monitoring raises traps and events (false) or suppresses all notifications (true).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.64
tmnxPortSFPStatus The value of tmnxPortSFPStatus indicates the operational status of the inserted SFF. If tmnxPortSFPEquipped is false, the tmnxPortSFPStatus will be 'not-equipped (0)', otherwise 'operational (1)' if no failure is detect…	TmnxSFFStatus Type Values: 0 not-equipped 1 operational 2 read-error 3 data-corrupt 4 ddm-corrupt 5 unsupported 6 culprit 7 blocked 8 module-fault 9 invalid-form-factor 10 reserved10 11 reserved11 Description: The TmnxSFFStatus specifies the operational status of the small form factor (SFF) that is inserted into the port. If the SFF is removed from the port, the value of TmnxSFFStatus will be 'not-equipped (0)', otherwise 'op…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.65
tmnxPortReasonDownFlags The tmnxPortReasonDownFlags indicates why a port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linkl…	Bits Enumerated Values: 0 unknown 1 linklossFwd 2 lagMemberPortStandby 3 ethCfmFault 4 opticalTuning 5 freqOutOfRange 6 freqNotConfigured 7 crcError 8 internalMacTxError 9 efmOamDown 10 symMonError 11 operGroupDown 12 satHostPortDown 13 satUplinkPortDown	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.66
tmnxPortSSMRxQualityLevel tmnxPortSSMRxQualityLevel indicates the SSM quality level of received SSM messages. On ports not supporting SSM, or not receiving SSM messages, the quality level will be 'unknown (0)'. The values 'prs (1)…	Enumeration Enumerated Values: 0 unknown 1 prs 2 stu 3 st2 4 tnc 5 st3e 6 st3 7 smc 8 st4 9 dus 10 prc 11 ssua 12 ssub 13 sec 14 dnu 15 inv 16 pno 17 eec1 18 eec2 19 failed 20 reserved20 21 reserved21 22 reserved22 23 reserved23	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.67
tmnxPortDwdmLaserChannelobsolete tmnxPortDwdmLaserChannel specifies the DWDM ITU channel at which a tunable optical interface will be configured to operate. A value of zero(0) can be specified only on an administratively disabled port or…	TmnxOpticalDwdmChannelr/w Type Constraints: range: 0 range: 17..61 range: 170..610 Description: TmnxOpticalDwdmChannel is the DWDM ITU channel associated with an optical interface. It is expressed in a form that is derived from the laser's operational frequency. For example 193.40 THz corresponds to DWDM ITU chann…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.68
tmnxPortOtuCapable The value of tmnxPortOtuCapable indicates whether or not the physical port supports the Optical Transport Unit (OTU) encapsulation.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.69
tmnxPortWaveTrackerCapableobsolete The value of tmnxPortWaveTrackerCapable indicates whether or not the physical port supports Wavelength Tracker. tmnxPortWaveTrackerCapable is equivalent to 'tnWtEncodePortCapabilityPresent' of the 1696-Ro…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.70
tmnxPortHybridIngAccessWeight The value of tmnxPortHybridIngAccessWeight specifies the increment or decrement of the ingress access weight associated with the port. This active weight affects the amount of ingress access buffer space managed by the …	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.71
tmnxPortHybridIngNetworkWeight The value of tmnxPortHybridIngNetworkWeight specifies the increment or decrement of the ingress network weight associated with the port. This active weight affects the amount of ingress network buffer space managed by t…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.72
tmnxPortHybridEgrAccessWeight The value of tmnxPortHybridEgrAccessWeight specifies the increment or decrement of the egress access weight associated with the port. This active weight affects the amount of egress access buffer space managed by the po…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.73
tmnxPortHybridEgrNetworkWeight The value of tmnxPortHybridEgrNetworkWeight specifies the increment or decrement of the egress network weight associated with the port. This active weight affects the amount of egress network buffer space managed by the…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.74
tmnxPortDwdmRxDtvAdjustEnableobsolete The value of tmnxPortDwdmRxDtvAdjustEnable specifies whether or not the Receive Decision threshold voltage adjustment feedback loop should be enabled. When this value is set to false, the optical receiver…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.75
tmnxPortDwdmRxDtvDacPercentobsolete The value of tmnxPortDwdmRxDtvDacPercent indicates the current relative adjustment of the receive decision threshold voltage in hundredths of a percent. 50.00% is the optical receiver's default decision t…	Hundredths of a percentUnsigned32 Constraints: range: 0-10000	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.76
tmnxPortInterfaceGroupHandlerIdx The value of tmnxPortInterfaceGroupHandlerIdx indicates whether or not the physical port is a member of an Interface Group Handler.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.77
tmnxPortHoldTimeUnits The value of tmnxPortHoldTimeUnits specifies the measurable units of tmnxPortHoldTimeDown and tmnxPortHoldTimeUp.	Enumerationr/w Enumerated Values: 0 seconds 1 centiseconds	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.78
tmnxPortLinkLengthInfo The value of tmnxPortLinkLengthInfo indicates the link length info stored in SFF EEPROMs. tmnxPortLinkLengthInfo is applicable only when tmnxPortSFPEquipped is 'true'; otherwise, all 6 bytes will have a v…	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.79
tmnxPortSFPNumLanes The value of tmnxPortSFPNumLanes indicates the total number of lanes supported by the CSFP/QSFP. If tmnxPortSFPEquipped is false, this object will have a value of '0'.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.80
tmnxPortPhysStateChangeCount The value of tmnxPortPhysStateChangeCount indicates the number of times a physical port state has changed from 'linkDown (3)' to either 'linkUp (4)' or 'up (5)' and from either 'linkUp (4)' or 'up (5)' to 'linkDown (3)'…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.81
tmnxPortOperGrpName The value of tmnxPortOperGrpName specifies the operational group name to use with this port.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.85
tmnxPortMonitorOperGrpName The value of tmnxPortMonitorOperGrpName specifies the operational group name (from TIMETRA-SERV-MIB::svcOperGrpName) that the port is monitoring. When this object is empty, the port is not monitoring any …	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.86
tmnxPortFarEndId The value of tmnxPortFarEndId indicates which port identifier is connected to tmnxPortPortID.	TIMETRA-TC-MIBTmnxPortID Description: A portid is a unique 32 bit number with special encoding. Refer to TIMETRA-CHASSIS-MIB::tmnxChassisPortIdScheme for a description of the various port mapping schemes used by the system for physical ports and …	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.87
tmnxPortEgrMonitorPortSched The value of tmnxPortEgrMonitorPortSched specifies whether to enable monitoring of port scheduler specified by tmnxPortEgrPortSchedPlcy.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.88
tmnxPortMonitorAggEgrQueueStats The value of tmnxPortMonitorAggEgrQueueStats specifies whether to enable the monitoring of aggregate egress queue statistics on the port. All queues on the port are monitored, which includes SAP egress, network egress, …	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.89
tmnxPortOptComplianceExtension The value of tmnxPortOptComplianceExtension indicates the optical compliance extension stored in SFF EEPROMs. tmnxPortOptComplianceExtension is only applicable when the value of tmnxPortSFPEquipped is set…	TIMETRA-TC-MIBTmnxPortOptComplianceExtType Description: The TmnxPortOptComplianceExtType is an enumerated integer that extends the tmnxPortOpticalCompliance field of of a small form factor (SFF) that is inserted into the port	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.90
tmnxPortEgrHsSchedPlcy The value of tmnxPortEgrHsSchedPlcy specifies the egress QoS HS scheduler policy for this port. This object must correspond to the index of a row in TIMETRA-QOS-MIB::tHsSchedPolicyTable, otherwise an 'inconsistentValue'…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.91
tmnxPortEgrHsPortPoolPlcy The value of tmnxPortEgrHsPortPoolPlcy specifies the egress QoS HS port pool policy for this port. This object must correspond to the index of a row in TIMETRA-QOS-MIB::tHsPoolPolicyTable, otherwise an 'inconsistentValu…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.92
tmnxPortDCpuProtPolicy The tmnxPortDCpuProtPolicy specifies the name of distributed CPU protection policy for the port.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.93
tmnxPortOperDCpuProtPolicy The tmnxPortOperDCpuProtPolicy indicates the name of distributed CPU protection policy operational for the port.	TIMETRA-TC-MIBTNamedItemOrEmpty Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.94
tmnxPortSchedulerMode The tmnxPortSchedulerMode indicates scheduler mode for the port.	TIMETRA-TC-MIBTSchedulerModer/w Type Values: 0 none 1 vlanQos Description: The shared queue scheduler mode.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.95
tmnxPortHwAggShaperScheduler The value of tmnxPortHwAggShaperScheduler specifies the name of the hardware aggregate shaper scheduling policy (from TIMETRA-QOS-MIB::tQosHwAggShaperSchedPlcyTable) assigned to this port.	TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..64 Description: The long name of an item, or an empty string. When used in a reference (TLNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control chara…	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.96
tmnxPortMonHwAggShaperSch The value of tmnxPortMonHwAggShaperSch specifies whether or not to enable statistics for monitor-thresholds assigned to this port.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.97
tmnxPortSchedulerLowLatency The value of tmnxPortSchedulerLowLatency specifies whether low latency egress scheduling is enabled on the port.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled Description: The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'.	.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.98

The tmnxPortTestTable has an entry for each port on each IOM card in
each chassis in the TMNX system.

tmnxPortTestEntry row .1.3.6.1.4.1.6527.3.1.2.2.4.3.1

Each row entry represents a port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxPortTestState The current testing status of this port.	Enumeration Enumerated Values: 1 notInTest 2 inTest	.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.1
tmnxPortTestMode The type of test to be executed on this port.	Enumerationr/w Enumerated Values: 0 notApplicable 1 loopback1 2 loopback2 3 loopback3 4 singalInsertion	.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.2
tmnxPortTestParameter A parameter to be passed to the test program.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.3
tmnxPortTestLastResult The status of the last test executed on this port.	Enumeration Enumerated Values: 0 notApplicable 1 success 2 failure 3 timeout	.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.4
tmnxPortTestStartTime The date and time the test started on this port. Returns 0 if tmnxPortTestState is notInTest.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.5
tmnxPortTestEndTime The date and time the last test completed. Returns 0 if a test is in progress or no tests have yet to be run on this port.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.6
tmnxPortTestDuration The number of seconds the port test is anticipated to last.	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.7
tmnxPortTestAction The operator sets this variable to perform the appropriate type of testing.	Enumerationr/w Enumerated Values: 1 none 2 startTest 3 stopTest	.1.3.6.1.4.1.6527.3.1.2.2.4.3.1.8

The tmnxPortEtherTable has an entry for each Ethernet (faste, gige,
xcme or xgige) port on each IOM card in each chassis in the TMNX
system.

tmnxPortEtherEntry row .1.3.6.1.4.1.6527.3.1.2.2.4.4.1

Each row entry represents an Ethernet port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations. Before an IOM card entry
can be deleted from the tmnxMDATable, its su…

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex tmnxPortPortID

Column	Syntax	OID
tmnxPortEtherMTU The size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest networ…	bytesUnsigned32r/w Constraints: range: 0-0 range: 512-9800	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.1
tmnxPortEtherDuplex The tmnxPortEtherDuplex variable specifies the duplex mode used by the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link …	Enumerationr/w Enumerated Values: 0 notApplicable 1 fullDuplex 2 halfDuplex	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.2
tmnxPortEtherSpeed The tmnxPortEtherSpeed variable specifies the link speed of the Ethernet interface. tmnxPortEtherSpeed is only valid on Ethernet interfaces where tmnxPortClass is 'faste(2)' or 'xcme(8)' or 'vspeede(14)'. …	Enumerationr/w Enumerated Values: 0 notApplicable 1 speed10 2 speed100 3 speed1000 4 speed10000 5 speed40000 6 speed100000 7 speed25000 8 speed50000	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3
tmnxPortEtherAutoNegotiate When the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet interface will automatically negotiate link parameters with the far end (including speed and duplex), and will advertise all speeds and duplex modes s…	Enumerationr/w Enumerated Values: 0 notApplicable 1 true 2 false 3 limited	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4
tmnxPortEtherOperDuplex The tmnxPortEtherOperDuplex variable indicates the operational duplex mode of the Ethernet interface. A value of 'fullDuplex' indicates that the link is in full duplex mode. A value of 'halfDuplex' indicates that the l…	Enumeration Enumerated Values: 0 notApplicable 1 fullDuplex 2 halfDuplex	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.5
tmnxPortEtherOperSpeed The tmnxPortEtherOperSpeed variable indicates the operational speed of the Ethernet interface in megabits per second (mbps). If the value of tmnxPortEtherAutoNegotiate is 'true', the link autonegotiates the link parame…	megabpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.6
tmnxPortEtherAcctPolicyId The value of the accounting policy must be defined prior to associating the policy with the ethernet port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId …	Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.7
tmnxPortEtherCollectStats Enable/disable the collection of accounting and statistical data for the network ethernet port. When applying accounting policies the data by default will be collected in the appropriate records and written to the desig…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.8
tmnxPortEtherMDIMDIX The tmnxPortEtherMDIMDIX variable indicates whether the Ethernet interface is of type 'mdi' (Media Dependent Interface) or 'mdix' (Media Dependent Interface with crossover). If the agent cannot identify the type of Ethe…	Enumeration Enumerated Values: 0 unknown 1 mdi 2 mdix	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.9
tmnxPortEtherXGigMode The tmnxPortEtherXGigMode variable specifies whether the Ethernet interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be 'notApplicable' if tmnxPortClass is not 'xgige'.	Enumerationr/w Enumerated Values: 0 notApplicable 1 lan 2 wan	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.10
tmnxPortEtherEgressRate The tmnxPortEtherEgressRate variable specifies the maximum egress bandwidth (in kilobits per second) that the Ethernet interface can generate. A value of -1 means that the limit is the actual physical limit. If the prov…	kilobpsInteger32r/w Constraints: range: -1--1 range: 1-1600000000	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.11
tmnxPortEtherDot1qEtype The tmnxPortEtherDot1qEtype variable specifies the ethertype expected when the port's encapsulation type is dot1qEncap.	Unsigned32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.12
tmnxPortEtherQinqEtype The tmnxPortEtherQinqEtype variable specifies the ethertype expected when the port's encapsulation type is qinqEncap.	Unsigned32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.13
tmnxPortEtherIngressRate The tmnxPortEtherIngressRate variable specifies the maximum ingress bandwidth (in megabits per second) that the Ethernet interface can receive. A value of -1 means that the limit is the actual physical limit. If the pro…	megabpsInteger32r/w Constraints: range: -1--1 range: 1-1600000	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14
tmnxPortEtherReportAlarm The value of tmnxPortEtherReportAlarm determines when and if to generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear.	TmnxPortEtherReportStatusr/w Type Values: 0 notUsed 1 signalFailure 2 remoteFault 3 localFault 4 noFrameLock 5 highBer 6 noBlockLock 7 noAmLock 8 duplicateLane Description: The TmnxPortEtherReportStatus is a bitmask that describes alarms that can be raised/cleared on an Ethernet Port. The possible values are: notUsed (0) - not applicable signalFailure(1) - Ethernet si…	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.15
tmnxPortEtherReportAlarmStatus The value of tmnxPortEtherReportAlarmStatus indicates the alarms on this port.	TmnxPortEtherReportStatus Type Values: 0 notUsed 1 signalFailure 2 remoteFault 3 localFault 4 noFrameLock 5 highBer 6 noBlockLock 7 noAmLock 8 duplicateLane Description: The TmnxPortEtherReportStatus is a bitmask that describes alarms that can be raised/cleared on an Ethernet Port. The possible values are: notUsed (0) - not applicable signalFailure(1) - Ethernet si…	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.16
tmnxPortEtherPkts1519toMax The total number of packets received that were longer than 1518 octets but less than the maximum frame size for the particular medium, usually 12287 octets (excluding framing bits, but including FCS octets) and were oth…	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17
tmnxPortEtherHCOverPkts1519toMax The number of times the associated tmnxPortEtherPkts1519toMax counter has overflowed.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.18
tmnxPortEtherHCPkts1519toMax The total number of packets (including bad packets) received that were between 1519 octets in length and the maximum frame size, usually 12287 octets inclusive (excluding framing bits but including FCS octets). …	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.19
tmnxPortEtherLacpTunnel The value of tmnxPortEtherLacpTunnel specifies whether the LACP packet tunneling for the ethernet port is enabled or disabled. When tunneling is enabled, the port will not process any LACP packets but will tunnel them t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.20
tmnxPortEtherDownWhenLoopedEnabled The value of tmnxPortEtherDownWhenLoopedEnabled specifies whether physical loop detection for the Ethernet port is enabled or disabled. When enabled, the port will periodically send out keep-alive PDUs with an EtherTyp…	TIMETRA-TC-MIBTmnxAdminStateTruthValuer/w Based On: SNMPv2-TCTruthValue Description: TmnxAdminStateTruthValue data type is an TruthValue object used to identify the administrative state of a snmp row. A value of 'true' means the snmp row is administrative 'up'.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.21
tmnxPortEtherDownWhenLoopedKeepAlive The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the number of seconds between each keep alive PDU transmission.	secondsUnsigned32r/w Constraints: range: 1-120	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.22
tmnxPortEtherDownWhenLoopedRetry The tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum number of seconds the port should wait after detecting a loop before tmnxPortState can be set to 'up'. A value of 0 specifies the the port should not …	secondsUnsigned32r/w Constraints: range: 0-0 range: 10-160	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.23
tmnxPortEtherDownWhenLoopedState The value of tmnxPortEtherDownWhenLoopedState indicates whether a physical loop has been detected on the port or not. If tmnxPortEtherDownWhenLoopedEnabled is set to 'false', this value will be 'noLoopDetected'.	Enumeration Enumerated Values: 1 noLoopDetected 2 loopDetected	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.24
tmnxPortEtherPBBEtype The tmnxPortEtherPBBEtype variable specifies the Ethertype expected for Provider Backbone Bridging Frames.	Unsigned32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.25
tmnxPortEtherReasonDownFlagsobsolete The tmnxPortEtherReasonDownFlags indicates why an ethernet port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown…	Bits Enumerated Values: 0 unknown 1 linklossFwd 2 lagMemberPortStandby	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26
tmnxPortEtherSingleFiber tmnxPortEtherSingleFiber is used to enable/disable packet gathering and redirection of IP packets from a single fiber on RX port of the Ethernet interface and redistribute packets to other interfaces through either stat…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.27
tmnxPortEtherSSM tmnxPortEtherSSM specifies whether or not synchronous status messages (SSM) are enabled on the ethernet port.	TIMETRA-TC-MIBTmnxAdminStateTruthValuer/w Based On: SNMPv2-TCTruthValue Description: TmnxAdminStateTruthValue data type is an TruthValue object used to identify the administrative state of a snmp row. A value of 'true' means the snmp row is administrative 'up'.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.28
tmnxPortEtherDWLUseBroadcastAddr tmnxPortEtherDWLUseBroadcastAddr specifies whether or not the Down When Looped destination MAC address is the broadcast address, 'true (1)', or the local port mac address, as specified in tmnxPortMacAddress, 'false (2)'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.29
tmnxPortEtherSSMCodeType The value of tmnxPortEtherSSMCodeType specifies the code-type used by the Synchronous Status Message (SSM) channel.	Enumerationr/w Enumerated Values: 1 unknown 2 sonet 3 sdh	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.30
tmnxPortEtherSSMTxDus The value of tmnxPortEtherSSMTxDus specifies whether or not the value 0xF (dus/dnu) is forced in the Synchronous Status Message (SSM) channel.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.31
tmnxPortEtherSSMRxEsmc The value of tmnxPortEtherSSMRxEsmc indicates the SSM code received on the Ethernet Synchronization Messaging Channel of the Ethernet port. The value returned for this object is only meaningful if tmnxPor…	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.32
tmnxPortEtherSSMTxQualityLevel The value of tmnxPortEtherSSMTxQualityLevel indicates the quality level transmitted in the Ethernet Synchronization Messaging Channel.	Enumeration Enumerated Values: 0 reserved0 1 prs 2 stu 3 st2 4 tnc 5 st3e 6 reserved6 7 smc 8 reserved8 9 dus 10 prc 11 ssua 12 ssub 13 reserved13 14 dnu 15 reserved15 16 pno 17 eec1 18 eec2 19 reserved19 20 reserved20 21 reserved21 22 reserved22 23 reserved23	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.33
tmnxPortEtherCrcMonSdThreshold The value of tmnxPortEtherCrcMonSdThreshold specifies a packet error rate threshold used to determine when to send a tmnxEqPortEtherCrcAlarm notification for a CRC Signal Degradation (SD) failure and tmnxEqPortEtherCrcA…	Unsigned32r/w Constraints: range: 0-9	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.34
tmnxPortEtherCrcMonSdTMultiplier The value of tmnxPortEtherCrcMonSdTMultiplier specifies the tmnxPortEtherCrcMonSdThreshold multiplier value. The CRC SD error rate threshold is calculated as: tmnxPortEtherCrcMonSdTMultiplier * 10e-tmnxPo…	Unsigned32r/w Constraints: range: 1-9	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.35
tmnxPortEtherCrcMonSfThreshold The value of tmnxPortEtherCrcMonSfThreshold specifies a packet error rate threshold used to determine when to send a tmnxEqPortEtherCrcAlarm notification for a CRC Signal Failure (SF) failure. Crossing th…	Unsigned32r/w Constraints: range: 0-9	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.36
tmnxPortEtherCrcMonSfTMultiplier The value of tmnxPortEtherCrcMonSfTMultiplier specifies the tmnxPortEtherCrcMonSfThreshold multiplier value. The CRC SF error rate threshold is calculated as: tmnxPortEtherCrcMonSfTMultiplier * 10e-tmnxPo…	Unsigned32r/w Constraints: range: 1-9	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.37
tmnxPortEtherCrcMonWindowSize The value of tmnxPortEtherCrcMonWindowSize specifies the size of the sliding window in seconds over which the tmnxPortEtherCrcMonSdThreshold and tmnxPortEtherCrcMonSfThreshold are applied.	secondsUnsigned32r/w Constraints: range: 5-60	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.38
tmnxPortEtherCrcAlarmReason The value of tmnxPortEtherCrcAlarmReason indicates the current status of the Ethernet CRC Monitored alarms on the port.	TmnxPortEtherMonReportStatus Type Values: 0 sdThresholdExceeded 1 sfThresholdExceeded Description: The TmnxPortEtherMonReportStatus is a bitmask that describes alarms that can be raised/cleared on an Ethernet Port used in Monitoring. The possible values are: sdThresholdExceeded (0)-- Signal Degradation …	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.39
tmnxPortEtherDownOnInternalError The value of tmnxPortEtherDownOnInternalError specifies whether or not the port is monitored for excessive internal MAC tx errors. When enabled, excess Internal MAC tx errors results in the tmnxPortOperSt…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.40
tmnxPortEtherMinFrameLength The value of tmnxPortEtherMinFrameLength specifies the minimum length of any frame transmitted out of the port.	bytesUnsigned32r/w Constraints: range: 64-64 range: 68-68 range: 72-72	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.41
tmnxPortEtherPhysAcctPolicyId The value of tmnxPortEtherPhysAcctPolicyId specifies the TIMETRA-LOG-MIB::tmnxLogApPolicyId that identifies the policy entry in TIMETRA-LOG-MIB::tmnxLogApTable which is associated with this ethernet port for the purpose…	Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.42
tmnxPortEtherPhysCollectStats The value of tmnxPortEtherPhysCollectStats specifies whether or not the collection of physical layer ethernet accounting and statistical data for the ethernet port is enabled. When a non-zero value is spe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.43
tmnxPortEtherOperPhyTxClock The value of tmnxPortEtherOperPhyTxClock indicates the result of Master/Slave resolution on copper based Ethernet ports. tmnxPortEtherOperPhyTxClock is 'notApplicable' if tmnxPortClass is not 'xcme' and tmnxPortType is …	TmnxPortEtherOperPhyTxClock Type Values: 0 notApplicable 1 master 2 slave Description: The TmnxPortEtherOperPhyTxClock data type is an enumerated integer that indicates the result of the master/slave resolution on copper based Ethernet ports running at 1 Gbps. - The value of 'notApplicable' ind…	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.44
tmnxPortEtherDwnOnIntlErrTxDisbl The value of tmnxPortEtherDwnOnIntlErrTxDisbl specifies whether or not a signal is sent to the remote transmitter to disable the laser before the port is brought out of service from excessive internal MAC tx errors. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.46
tmnxPortEtherAccessBandwidth The value of tmnxPortEtherAccessBandwidth specifies the administrative bandwidth assigned to this port. The administrative bandwidth can be over or under booked using the value of tmnxPortEtherAccessBooki…	kilobpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.47
tmnxPortEtherAccessBookingFactor The value of tmnxPortEtherAccessBookingFactor specifies the booking factor, against the administrative bandwidth specified by tmnxPortEtherAccessBandwidth.	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.48
tmnxPortEtherAccessAvailableBW The value of tmnxPortEtherAccessAvailableBW indicates the bandwidth that is still free for booking on this port.	kilobpsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.49
tmnxPortEtherAccessBookedBW The value of tmnxPortEtherAccessBookedBW indicates the port bandwidth that has been booked.	kilobpsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.50
tmnxPortEtherPTPAsymmetry The value of tmnxPortEtherPTPAsymmetry specifies the path asymmetry correction value (in nanoseconds) that is used to specify the difference in transmission time between master-to-slave and slave-to-master. The user sho…	nanosecondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.51
tmnxPortEtherUtilStatsInterval The value of tmnxPortEtherUtilStatsInterval specifies the time interval used to calculate the port utilization statistics.	secondsUnsigned32r/w Constraints: range: 30-600	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.52
tmnxPortEtherUtilStatsInput The value of tmnxPortEtherUtilStatsInput indicates the utilization of the port in relation to the data received and the port capacity. This utilization is measured over the interval indicated by tmnxPortEtherUtilStatsIn…	hundredths of a percentUnsigned32 Constraints: range: 0-10000	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.53
tmnxPortEtherUtilStatsOutput The value of tmnxPortEtherUtilStatsOutput indicates the utilization of the port in relation to the data transmitted and the port capacity. This utilization is measured over the interval indicated by tmnxPortEtherUtilSta…	centipercentUnsigned32 Constraints: range: 0-10000	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.54
tmnxPortEtherRsFecMode The value of tmnxPortEtherRsFecMode specifies the mode of Reed-Solomon Forward Error Correction (RS-FEC) to be used by this ethernet port. When the value of tmnxPortEtherRsFecMode is set to 'none', the po…	Enumerationr/w Enumerated Values: 0 none 1 cl91-514-528 2 cl74 3 cl108	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.55
tmnxPortEtherEthBnEgrRateChanges The value of tmnxPortEtherEthBnEgrRateChanges specifies whether or not the changes received in Eth-BN messages on a port based MEP are allowed to update the egress rate used on the port. The value 'true (…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.56
tmnxPortEtherEthBnEgressRate The value of tmnxPortEtherEthBnEgressRate indicates the ETH-BN (Ethernet Bandwidth Notification) egress rate received from the ETH-CFM (Ethernet Connectivity Fault Management) subsystem. A value of '-1' i…	kilobpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.57
tmnxPortEtherOperEgressRate The value of tmnxPortEtherOperEgressRate indicates the operational egress bandwidth (in kilobits per second) that the Ethernet interface can generate. The value is the minimum of the admin egress rate tmnxPortEtherEgres…	kilobpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.58
tmnxPortEtherAccessBandwidthHi The tmnxPortEtherAccessBandwidthHi specifies the high 32-bit value of administrative bandwidth assigned to this port. Lower 32-bit value of administrative bandwidth is assigned using tmnxPortEtherAccessBandwidth. …	Unsigned32r/w Constraints: range: 0-1	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.59
tmnxPortEtherEgrQosPortQosPlcy The value of tmnxPortEtherEgrQosPortQosPlcy specifies the name to associate with this port.	TIMETRA-TC-MIBTLNamedItemOrEmptyr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..64 Description: The long name of an item, or an empty string. When used in a reference (TLNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control chara…	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.60
tmnxPortEtherLoopback The value of tmnxPortEtherLoopback specifies the loopback mode of the port. none(0) - Loopback is disabled. line(1) - Loopback loops frames received on this port back to the remote system. interna…	Enumerationr/w Enumerated Values: 0 none 1 line 2 internal	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.61
tmnxPortEtherLoopbackSwapMac The value of tmnxPortEtherLoopbackSwapMac specifies if the source and destination MAC addresses in the packets are to be interchanged before being loopbacked to the sender. Setting tmnxPortEtherLoopbackSwapMac must be a…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.62
tmnxPortEtherAccessAcctPolicyId The value of tmnxPortEtherAccessAcctPolicyId specifies the TIMETRA-LOG-MIB::tmnxLogApPolicyId that identifies the policy entry in TIMETRA-LOG-MIB::tmnxLogApTable which is associated with this ethernet access port queue …	Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.63
tmnxPortEtherAccessCollectStats The value of tmnxPortEtherAccessCollectStats specifies whether or not the collection of physical layer ethernet accounting and statistical data for the ethernet access port queue is enabled. When a non-ze…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.64
tmnxPortEtherDiscardRxPauseFrame The value of tmnxPortEtherDiscardRxPauseFrame specifies whether or not the processing of received pause frames is enabled. When the value of tmnxPortEtherDiscardRxPauseFrame is 'false (2)', the port will …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.65
tmnxPortEtherSSMEsmcTunnel The value of tmnxPortEtherSSMEsmcTunnel specifies whether or not the MEF EPL Option 2 rules are applied and the ESMC frames are tunneled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.66
tmnxPortEtherReportedAlarmStatus The value of tmnxPortEtherReportedAlarmStatus indicates the active alarms that are currently logged on the ethernet port. This field reports the active alarms raised in tmnxPortEtherReportAlarmStatus which are also user…	TmnxPortEtherReportStatus Type Values: 0 notUsed 1 signalFailure 2 remoteFault 3 localFault 4 noFrameLock 5 highBer 6 noBlockLock 7 noAmLock 8 duplicateLane Description: The TmnxPortEtherReportStatus is a bitmask that describes alarms that can be raised/cleared on an Ethernet Port. The possible values are: notUsed (0) - not applicable signalFailure(1) - Ethernet si…	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.67
tmnxPortEtherMtuProfile The value of tmnxPortEtherMtuProfile specifies that a HW profile must be allocated in order to enforce MTU checks and ICMP 'Packet too big' error reporting. The MTU value applied is the value of vRtrIfOpe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.69
tmnxPortEtherOperMtuProfile The value of tmnxPortEtherOperMtuProfile indicates the operational HW profile.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.70
tmnxPortEtherTxPauseFrame The value of tmnxPortEtherTxPauseFrame specifies whether or not the transmission of pause frames is enabled. When the value of tmnxPortEtherTxPauseFrame is 'true (1)', the port will send PAUSE frames when…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.71
tmnxPortEtherPTPTunnel The value of tmnxPortEtherPTPTunnel specifies whether or not tunneling of PTP frames is enabled on the port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.72
tmnxPortEtherDwlTunneling The value of tmnxPortEtherDwlTunneling specifies whether or not MEF EPL Option 2 rules are applied and the physical loop detection is tunneled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.73
tmnxPortEtherOperAutoNegotiate The value of tmnxPortEtherOperAutoNegotiate indicates the operational state of whether or not the Ethernet interface will automatically negotiate link parameters with the far end (including speed and duplex), and will a…	Enumeration Enumerated Values: 0 notApplicable 1 unsupported 2 down 3 up	.1.3.6.1.4.1.6527.3.1.2.2.4.4.1.74

The tmnxSonetTable has an entry for each packet over Sonet port on
each IOM card in each chassis in the TMNX system.

tmnxSonetEntry row .1.3.6.1.4.1.6527.3.1.2.2.4.5.1

Each row entry represents a packet over Sonet port on a
IOM card in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Before an IOM
tmnxMDAEntry can be deleted from the tmnxMDATab…

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex tmnxPortPortID

Column	Syntax	OID
tmnxSonetSpeed The rate of this optical facility.	Enumerationr/w Enumerated Values: 1 oc3 2 oc12 3 oc48 4 oc192 5 oc768 6 oc1	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.1
tmnxSonetClockSource tmnxSonetClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed') or from a clock recovered from the line's receive data stream ('loopTimed').	Enumerationr/w Enumerated Values: 1 loopTimed 2 nodeTimed	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.2
tmnxSonetFraming The value of tmnxSonetFraming specifies the type of framing used on this interface.	Enumerationr/w Enumerated Values: 1 unknown 2 sonet 3 sdh	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.3
tmnxSonetReportAlarm The value of tmnxSonetReportAlarm determines when and if to generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear notifications for this port: loc(1) Reports a loss of clock which causes the operational …	Bitsr/w Enumerated Values: 0 notUsed 1 loc 2 lais 3 lrdi 4 ss1f 5 sb1err 6 lb2erSd 7 lb2erSf 8 slof 9 slos 10 stxptr 11 srxptr 12 lrei	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4
tmnxSonetBerSdThreshold The value of tmnxSonetBerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SD failure and tmnxEqPortSonetAlarmClear notification for a BE…	Unsigned32r/w Constraints: range: 3-9	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.5
tmnxSonetBerSfThreshold The value of tmnxSonetBerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SF failure and tmnxEqPortSonetAlarmClear notification for a BE…	Unsigned32r/w Constraints: range: 3-6	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.6
tmnxSonetApsobsolete Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.7
tmnxSonetApsAdminStatusobsolete Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.	TIMETRA-CHASSIS-MIBTmnxPortAdminStatusr/w Type Values: 1 noop 2 inService 3 outOfService 4 diagnose Description: The desired administrative status of this port.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.8
tmnxSonetApsOperStatusobsolete Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.	TmnxPortOperStatus Type Values: 1 unknown 2 inService 3 outOfService 4 diagnosing 5 failed Description: The current operational status of this port.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.9
tmnxSonetApsAuthKeyobsolete Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.10
tmnxSonetApsNeighborAddrobsolete Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.11
tmnxSonetApsAdvertiseIntervalobsolete Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.	millisecondsSNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.12
tmnxSonetApsAdvertiseTimeLeftobsolete Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.	millisecondsSNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.13
tmnxSonetApsHoldTimeobsolete Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.	millisecondsSNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.14
tmnxSonetApsHoldTimeLeftobsolete Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.	millisecondsSNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.15
tmnxSonetLoopback Activate a loopback on the SONET port. The SONET port must be in a shutdown state to activate any type of loopback.	Enumerationr/w Enumerated Values: 0 none 1 line 2 internal	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.16
tmnxSonetReportAlarmStatus The bits in this object are used for indicating the alarms. The bits are explained as follows: loc(1) Indicates a loss of clock which causes the operational state of the port to be downed. lais…	Bits Enumerated Values: 0 notUsed 1 loc 2 lais 3 lrdi 4 ss1f 5 sb1err 6 lb2erSd 7 lb2erSf 8 slof 9 slos 10 stxptr 11 srxptr 12 lrei	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17
tmnxSonetSectionTraceMode The tmnxSonetSectionTraceMode variable along with the tmnxSonetJ0String object determines the contents of the section trace bytes (j0/z0) in the SONET Section Header. If the mode is set to 'increment-z0', then the j0 by…	Enumerationr/w Enumerated Values: 1 increment-z0 2 byte 3 string	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.18
tmnxSonetJ0String The tmnxSonetJ0String is used with the tmnxSonetSectionTraceMode variable to determine the contents of the j0 byte in the SONET Section Header. If the tmnxSonetSectionTraceMode is increment-z0, this object is ignored. I…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.19
tmnxSonetMonS1Byte The tmnxSonetMonS1Byte variable reports the Synchronization Status Message from the S1 byte in the Line Overhead Header. A value of 0x00 indicates unknown quality. A value of 0xF0 indicates `Do not use for synchronizati…	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.20
tmnxSonetMonJ0String The tmnxSonetMonJ0String variable reports the contents of the j0 byte in the SONET Section Header.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.21
tmnxSonetMonK1Byte The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K1 byte in the SONET Line Overhead Header.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.22
tmnxSonetMonK2Byte The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K2 byte in the SONET Line Overhead Header.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.23
tmnxSonetSingleFiber tmnxSonetSingleFiber is used to enable/disable packet gathering and redirection of IP packets from a single fiber on RX port of the SONET interface and redistribute packets to other interfaces through either state route…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.24
tmnxSonetHoldTimeUp The value of tmnxSonetHoldTimeUp is used to configure the hold-timer for link up event dampening. A value of zero (0) indicates that an up transition is reported immediately.	decisecondsTmnxHoldTimer/w Constraints: range: 0-100 Description: The TmnxHoldTime specifies the hold-timer for link up/down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface t…	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.25
tmnxSonetHoldTimeDown The value of tmnxSonetHoldTimeDown is used to configure the hold-timer for link down event dampening. A value of zero (0) indicates that a down transition is reported immediately.	decisecondsTmnxHoldTimer/w Constraints: range: 0-100 Description: The TmnxHoldTime specifies the hold-timer for link up/down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface t…	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.26
tmnxSonetSuppressLoOrderAlarm The value of tmnxSonetSuppressLoOrderAlarm specifies whether or not the lower order alarms on Sonet ports are suppressed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.27
tmnxSonetTxDus The value of tmnxSonetTxDus specifies whether or not the value 0xF (dus/dnu) is forced in the S1 overhead byte.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.28
tmnxSonetTxS1Byte The value of tmnxSonetTxS1Byte indicates the transmitted S1 Byte.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.29
tmnxSonetResetPortOnPathDownobsolete The value of tmnxSonetResetPortOnPathDown specifies whether or not the port will be reset when the path transitions to the oper down state. This object has been obsoleted in release 21.2.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.5.1.30

The tmnxSonetPathTable has an entry for each sonet path configured in
each packet over Sonet port on each IOM card in each chassis in the
TMNX system.

tmnxSonetPathEntry row .1.3.6.1.4.1.6527.3.1.2.2.4.6.1

Each row entry represents a configured sonet path in a packet
over Sonet port on a IOM card in a chassis in the system.
The tmnxSonetPathEntry contains attributes that are
unique to a sonet path of a 'sonet' TmnxPortTyp…

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex tmnxPortPortID

Column	Syntax	OID
tmnxSonetPathRowStatus tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1
tmnxSonetPathLastChangeTime The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxSonetPathEntry row for this sonet path.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2
tmnxSonetPathMTU The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be…	bytesUnsigned32r/w Constraints: range: 0-0 range: 512-9208	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3
tmnxSonetPathScramble If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends of the connection must use the same scrambling algorithm. If tmnxSonetPathScramble is set …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4
tmnxSonetPathC2Byte The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does not support channelization: Setting C2 equal to 0x16 indicates scrambled so…	Unsigned32r/w Constraints: range: 0-254	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5
tmnxSonetPathJ1String The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. The bytes must be printable ASCII. If the string is less than 62 bytes, it will be padded wit…	OctetStringr/w Constraints: range: 0-62	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6
tmnxSonetPathCRC The value of tmnxSonetPathCRC variable specifies the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the …	Enumerationr/w Enumerated Values: 1 crc16 2 crc32	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7
tmnxSonetPathOperMTU The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are used for transmitting network datagrams, this is the size of the largest network datagram tha…	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8
tmnxSonetPathOperMRU The negotiated size of the largest packet that can be received on the sonet path, specified in octets.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9
tmnxSonetPathReportAlarm The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear notifications for this port: pais(1) Reports path alarm indication signal errors…	Bitsr/w Enumerated Values: 0 notUsed 1 pais 2 plop 3 prdi 4 pb3err 5 pplm 6 prei 7 puneq 8 plcd	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10
tmnxSonetPathAcctPolicyId The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can only be associated with network sonet path. A non-zero value indicates the tmnxLogApPolicyI…	Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11
tmnxSonetPathCollectStats Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies the data by default will be collected in the appropriate records and written to the designat…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12
tmnxSonetPathReportAlarmStatus The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm indication signal errors. plop(2) Indicates path loss of pointer (per tributary) …	Bits Enumerated Values: 0 notUsed 1 pais 2 plop 3 prdi 4 pb3err 5 pplm 6 prei 7 puneq 8 plcd	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13
tmnxSonetPathMonC2Byte The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte. A value of 256 represents the C2 header byte is unknown.	Unsigned32 Constraints: range: 0-256	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14
tmnxSonetPathMonJ1String The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15
tmnxSonetPathTypeobsolete tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary unit group. ds3 - Configures the port or channel as service access(ds3) e3 - C…	Enumerationr/w Enumerated Values: 1 ds3 2 e3 3 vtg 4 tug-2 5 tug-3	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16
tmnxSonetPathChildType tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 for TU3 paths pdhE1 for VT2 paths pdhDs1 for VT15 paths Examples of valid child pa…	TIMETRA-CHASSIS-MIBTmnxMDAChanTyper/w Type Values: 0 unknown 1 sonetSts768 2 sonetSts192 3 sonetSts48 4 sonetSts12 5 sonetSts3 6 sonetSts1 7 sdhTug3 8 sonetVtg 9 sonetVt15 10 sonetVt2 11 sonetVt3 12 sonetVt6 13 pdhTu3 14 pdhDs3 15 pdhE3 16 pdhDs1 17 pdhE1 18 pdhDs0Grp 19 reserved19 20 reserved20 21 reserved21 Description: The TmnxMDAChanType data type indicates the type of channel that can be created on an MDA.	.1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17

The Port type table has an entry for each SR OS port type.

tmnxPortTypeEntry row .1.3.6.1.4.1.6527.3.1.2.2.4.7.1

Each row entry represents an Nokia SROS series port model. Rows in
this table are created by the agent at initialization and cannot be
created or destroyed by SNMP Get or Set requests.

Indexes

tmnxPortTypeIndex

Column	Syntax	OID
tmnxPortTypeIndex The unique index value which identifies this type of Nokia SROS series port model.	TmnxPortType Description: TmnxPortType is an index into the tmnxPortTypeTable used to identify a specific type of hardware port.	.1.3.6.1.4.1.6527.3.1.2.2.4.7.1.1
tmnxPortTypeName The administrative name that identifies this type of Nokia SROS series port model. This name string may be used in CLI commands to specify a particular Port model type.	TIMETRA-TC-MIBTNamedItemOrEmpty Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.7.1.2
tmnxPortTypeDescription A detailed description of this Nokia SROS series port model.	TIMETRA-TC-MIBTItemDescription Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc.	.1.3.6.1.4.1.6527.3.1.2.2.4.7.1.3
tmnxPortTypeStatus When tmnxPortTypeStatus has a value of 'true' it indicates that this port model is supported in this revision of the management software. When it has a value of 'false' there is no support.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.7.1.4

The Port Connector type table has an entry for each port connector
type. Some example port connector types are: 'Small Form Factor Plugin
(SFP)', 'SC Simplex'.

tmnxPortConnectTypeEntry row .1.3.6.1.4.1.6527.3.1.2.2.4.8.1

Each row entry represents an Nokia SROS series port
Connector model. Rows in this table are created by the agent
at initialization and cannot be created or destroyed by SNMP
Get or Set requests.

Indexes

tmnxPortConnectTypeIndex

Column	Syntax	OID
tmnxPortConnectTypeIndex The unique index value which identifies this type of Nokia SROS series port connector model.	TmnxPortConnectorType Description: TmnxPortConnectorType is an index into the tmnxPortConnectTypeTable used to identify a specific type of port connector.	.1.3.6.1.4.1.6527.3.1.2.2.4.8.1.1
tmnxPortConnectTypeName The administrative name that identifies this type of Nokia SROS series port connector model. This name string may be used in CLI commands to specify a particular port connector model type.	TIMETRA-TC-MIBTNamedItemOrEmpty Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..32 Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,…	.1.3.6.1.4.1.6527.3.1.2.2.4.8.1.2
tmnxPortConnectTypeDescription A detailed description of this Nokia SROS series port connector model.	TIMETRA-TC-MIBTItemDescription Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc.	.1.3.6.1.4.1.6527.3.1.2.2.4.8.1.3
tmnxPortConnectTypeStatus When tmnxPortConnectTypeStatus has a value of 'true' it indicates that this port connector model is supported in this revision of the chassis management software. When it has a value of 'false' there is no support.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.4.8.1.4

The Network Port FC Stats table has an entry for each forwarding class
defined on each network port.

tmnxPortFCStatsEntry row .1.3.6.1.4.1.6527.3.1.2.2.4.9.1

Each row entry represents a set of ingress and egress packet and octet
statistics for the given network port and forwarding class. Rows in
this table are created by the agent when the network port is
provisioned and can…

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex tmnxPortPortID tmnxPortFCStatsIndex

Column	Syntax	OID
tmnxPortFCStatsIndexobsolete The forwarding class associated with these stats on this network port.	TIMETRA-TC-MIBTFCName Based On: TNamedItem Description: The name of a Forwarding Class entry.	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.1
tmnxPortFCStatsIngFwdInProfPktsobsolete The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.2
tmnxPortFCStatsIngFwdOutProfPktsobsolete The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.3
tmnxPortFCStatsIngFwdInProfOctsobsolete The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.4
tmnxPortFCStatsIngFwdOutProfOctsobsolete The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.5
tmnxPortFCStatsIngDroInProfPktsobsolete The number of in-profile packets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.6
tmnxPortFCStatsIngDroOutProfPktsobsolete The number of out-of-profile packets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.7
tmnxPortFCStatsIngDroInProfOctsobsolete The number of in-profile octets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.8
tmnxPortFCStatsIngDroOutProfOctsobsolete The number of out-of-profile octets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.9
tmnxPortFCStatsEgrFwdInProfPktsobsolete The number of in-profile packets (rate below CIR) forwarded by the egress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.10
tmnxPortFCStatsEgrFwdOutProfPktsobsolete The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.11
tmnxPortFCStatsEgrFwdInProfOctsobsolete The number of in-profile octets (rate below CIR) forwarded by the egress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.12
tmnxPortFCStatsEgrFwdOutProfOctsobsolete The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.13
tmnxPortFCStatsEgrDroInProfPktsobsolete The number of in-profile packets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.14
tmnxPortFCStatsEgrDroOutProfPktsobsolete The number of out-of-profile packets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.15
tmnxPortFCStatsEgrDroInProfOctsobsolete The number of in-profile octets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.16
tmnxPortFCStatsEgrDroOutProfOctsobsolete The number of out-of-profile octets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.2.4.9.1.17