tmnxPortHoldTimeDown
TIMETRA-PORT-MIB ·
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.15
Object
The value of tmnxPortHoldTimeDown is used to configure the hold-timer
for link down event dampening.
A value of zero (0) indicates that a down transition is reported
immediately. The value of tmnxPortHoldTimeDown is not applicable when
tmnxPortClass has a value of 'sonet (5)' or tmnxPortType has a value
of 'portTypeDS3E3'. In these cases, tmnxSonetHoldTimeDown and
tmnxDS3HoldTimeDown are used, respectively.
tmnxPortHoldTimeDown is measured in units as specified by
tmnxPortHoldTimeUnits. If the value of tmnxPortHoldTimeUnits is
'centiseconds(1)', the value must be specified in multiples of 5. The
maximum hold-time for this object is 10 hours, regardless of the units
specified. Attempts to change the maximum value to a hold-time longer
than 10 hours will result in an 'inconsistentValue' error.
Context
- MIB
- TIMETRA-PORT-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.2.4.2.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Default
0- Parent
- tmnxPortEntry
- Groups
- 5
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-PORT-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-PORT-MIB::tmnxPortHoldTimeDown'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'TIMETRA-PORT-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-PORT-MIB::tmnxPortHoldTimeDown.<tmnxChassisIndex>.<tmnxPortPortID>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'TIMETRA-PORT-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TIMETRA-PORT-MIB::tmnxPortHoldTimeDown'
Syntax
- Source
- TmnxHoldTime
- Base type
Unsigned32
Type Description
The TmnxHoldTime specifies the hold-timer for link up/down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired.
Values & Constraints
Object Constraints
range: 0-3600000