LUM-MES-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
31
Rows
31
Columns
862

mesUniTable

table obsolete
.1.3.6.1.4.1.8708.2.32.2.2.1 · 1 row entry · 54 columns
Open in standard view 
The UNI list.
mesUniEntry entry .1.3.6.1.4.1.8708.2.32.2.2.1.1
An entry in the UNI list.
Indexes
mesUniIndex
Column Syntax OID
mesUniIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.1
mesUniName
The management name of the interface, for example
'uni:1:2:1-2'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.2
mesUniDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.3
mesUniSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.4
mesUniSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.5
mesUniTxPort
The TX-port of the interface corresponding to the
UNI.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.6
mesUniRxPort
The RX-port of the interface corresponding to the
UNI.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.7
mesUniObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.8
mesUniAdminStatus
The administrative state for the object.

down - The object is de-activated.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration.…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.9
mesUniOperStatus
The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.10
mesUniIdentifier
Unique identifier for the UNI.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.11
mesUniMtuSize
The Max Transmission Unit (MTU) Size for the UNI.
Unsigned32r/w
Constraints:
range: 1518-9600
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.12
mesUniMaxNoOfEvcs
The remaining number of EVCs that
can be created on this UNI.
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.13
mesUniCurrentNoOfEvcs
The current number of EVCs associated
with this UNI.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.14
mesUniAvailableCapacity
Available (unused) bandwidth capacity at the UNI.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.15
mesUniServiceMultiplexing
Defines whether several EVCs may be associated with
the UNI.

no - Only one EVC can be associated with the UNI.

yes - Several EVCs can be associated with the UNI.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.16
mesUniBundling
Defines whether several CE-VLAN IDs may be mapped to
the same EVC.

no - Only one CE-VLAN ID may be mapped to any given
EVC.

yes - Several CE-VLAN IDs may be mapped to any given
EVC.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.17
mesUniAllToOneBundling
Defines whether all CE-VLAN IDs will be mapped to
the same EVC.

no - Different CE-VLAN IDs may be mapped to
different EVCs.

yes - All CE-VLAN IDs will be mapped to the same
EVC.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.18
mesUniUntaggedCeVlanIdAssignment
CE-VLAN ID assigned to untagged and priority
tagged Service Frames.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.19
mesUniAssociateBwp
Create and associate ingress or egress BW profile
for the UNI.

The following must be selected:
- Direction (ingress or egress)
- Class of Service indentifer
- Commited Information Rate
- Commited Bur…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.20
mesUniReleaseBwp
Release relationship to BW profile.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.21
mesUniIngressBwProfilePerUni
Defines whether the ingress BW profile is applied
at the UNI level (instead of at the EVC level).

disabled - BW profiling is done per EVC (or CoS).

enabled - BW profiling is done at UNI le…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.22
mesUniIngressBwp
The CoS Identifier for the ingress BW profile.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.23
mesUniEgressBwProfilePerUni
Defines whether the egress BW profile is applied
at the UNI level (instead of at the EVC level).

disabled - BW profiling is done per EVC (or CoS).

enabled - BW profiling is done at UNI lev…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.24
mesUniEgressBwp
The CoS Identifier for the egress BW profile.

Not available in this release.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.25
mesUniL2ControlProtocolProcessing deprecated
Defines how the L2-protocols shall be handled
at the UNI.

discard - discard all ingress frames carrying
L2 Control Protocols.

passToEvc - Let the EVC decide how to handle this
…
Enumerationr/w
Enumerated Values:
1discard
2peer
3passToEvc
4peerAndPassToEvc
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.26
mesUniSetupCommand
Do basic settings of the UNI.

Identifier, type of multiplexing and type of
bundling can be selected.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.27
mesUniCreateEvcCommand
Create a new EVC terminating on the UNI.

A unique identifier, NNI to connect to, and VLAN-ID
must be selected.

This will create an entry in the EVC table.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.28
mesUniListCeVlanIdsCommand
List all used and unused CE-VLAN IDs at the UNI.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.29
mesUniTaggingOfUntaggedFrames
Defines whether CE-VLAN ID may be assigned to
untagged and priority tagged Service Frames.

disabled - tagging is disabled.

enabled - tagging is enabled. CE-VLAN ID is assigned
to …
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.30
mesUniCeVlanIdAssignmentCommand
Assigns CE-VLAN ID to untagged and priority
tagged Service Frames.
params
Assignment enabled or disabled.
Default CE VLAN id.
Default CE VLAN priority.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.31
mesUniL2SpanningTreeProcessing
Defines how the L2-protocols shall be handled
at the UNI.

MAC dest. address: 01-80-C2-00-00-00

discard - discard all ingress frames carrying
L2 Control Protocols.

p…
Enumerationr/w
Enumerated Values:
1discard
2peer
3passToEvc
4peerAndPassToEvc
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.32
mesUniL2PauseProcessing
Defines how the L2-protocols shall be handled
at the UNI.

MAC dest. address: 01-80-C2-00-00-01

discard - discard all ingress frames carrying
L2 Control Protocols.

p…
Enumerationr/w
Enumerated Values:
1discard
2peer
3passToEvc
4peerAndPassToEvc
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.33
mesUniL2SlowProtocolsProcessing
Defines how the L2-protocols shall be handled
at the UNI.

MAC dest. address: 01-80-C2-00-00-02

discard - discard all ingress frames carrying
L2 Control Protocols.

p…
Enumerationr/w
Enumerated Values:
1discard
2peer
3passToEvc
4peerAndPassToEvc
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.34
mesUniL2PortAuthenticationProcessing
Defines how the L2-protocols shall be handled
at the UNI.

MAC dest. address: 01-80-C2-00-00-03

discard - discard all ingress frames carrying
L2 Control Protocols.

p…
Enumerationr/w
Enumerated Values:
1discard
2peer
3passToEvc
4peerAndPassToEvc
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.35
mesUniL2OtherBridgeBlockProcessing
Defines how the L2-protocols shall be handled
at the UNI.

MAC dest. address: 01-80-C2-00-00-04 -> 0F

discard - discard all ingress frames carrying
L2 Control Protocols.
…
Enumerationr/w
Enumerated Values:
1discard
2peer
3passToEvc
4peerAndPassToEvc
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.36
mesUniL2AllLANsBridgeMgmtProcessing
Defines how the L2-protocols shall be handled
at the UNI.

MAC dest. address: 01-80-C2-00-00-10

discard - discard all ingress frames carrying
L2 Control Protocols.

p…
Enumerationr/w
Enumerated Values:
1discard
2peer
3passToEvc
4peerAndPassToEvc
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.37
mesUniL2GarpProcessing
Defines how the L2-protocols shall be handled
at the UNI.

MAC dest. address: 01-80-C2-00-00-20 -> 2F

discard - discard all ingress frames carrying
L2 Control Protocols.
…
Enumerationr/w
Enumerated Values:
1discard
2peer
3passToEvc
4peerAndPassToEvc
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.38
mesUniL2OamUniMeProcessing
Defines how the L2-protocols shall be handled
at the UNI.

MAC dest. address: 01-80-C2-00-00-30 -> 3F

discard - discard all ingress frames carrying
L2 Control Protocols.
…
Enumerationr/w
Enumerated Values:
1discard
2peer
3passToEvc
4peerAndPassToEvc
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.39
mesUniTagTransparency
Defines if it should be assumed that service frames
already have a provider tag at the UNI.
When enabled no provider-tag is added/removed from
the service frames.

disabled - Provider tag is not present at…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.40
mesUniMgmtVlan
Defines whether the management VLAN is enabled or
disabled on the client port.

disabled - Management VLAN on port is disabled.

enabled - Management VLAN on port is enabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.41
mesUniDefineMgmtVlan
Procedure to define how the management
frames shall be tagged.

Sets tag type, ether type,
VLAN id and priority to be used for the
management frames.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.42
mesUniMgmtVlanTagType
Defines what Ether Type the tag applied
to the mgmt VLAN shall have.

noTag - No mgmt VLAN is active
qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
tag0x9100 - Proprietary, …
Enumerationr/w
Enumerated Values:
0noTag
1qTag0x8100
2sTag0x88a8
3tag0x9100
4macInMac
5other
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.43
mesUniMgmtVlanEtherType
Applicable if tag type is 'other'
Choose your own Ether Type.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.44
mesUniMgmtVlanVlanId
The VLAN-ID of the management VLAN.

This is a temporary modelling of mgmt VLAN for 9.1,
might be changed later.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.45
mesUniMgmtVlanPriority
Priority value for the mgmt VLAN.

This value will be used in the priority
field of the mgmt VLAN tag.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.46
mesUniMgmtVlanMacAddress
The mac address of the port.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.47
mesUniMacInMac
The Mac-in-Mac enacpsulation that can be
enabled/disabled on the management channel.

disabled Mac-In-Mac not used on Mgmt VLAN port.

enabled Mac-In-Mac used on Mgmt VLAN port.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.48
mesUniMacInMacIsid
The I-SID is the 24-bit service instance identifier
that identifies the frame in a Provider Backbone
Network.
Unsigned32r/w
Constraints:
range: 256-16777214
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.49
mesUniMacInMacDa
The Mac-in-Mac DA is the destination backbone
Mac address.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.50
mesUniDefineMac
Define MAC attributes for the management channel on
this NNI.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.51
mesUniLagStatus
The Link Aggregation Group (LAG) status

noLag - port does not belong to a LAG

master - port is master in a LAG

slave - port is slave in a LAG
Enumeration
Enumerated Values:
1noLag
2master
3slave
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.52
mesUniLagPortmask Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.53
mesUniAssociateLag
Creates a Link Aggregation Group.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.2.1.1.54

mesNniTable

table obsolete
.1.3.6.1.4.1.8708.2.32.2.3.1 · 1 row entry · 28 columns
Open in standard view 
The NNI list.
mesNniEntry entry .1.3.6.1.4.1.8708.2.32.2.3.1.1
An entry in the NNI list.
Indexes
mesNniIndex
Column Syntax OID
mesNniIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.1
mesNniName
The management name of the interface, for example
'nni:1:2:1-2'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.2
mesNniDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.3
mesNniSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.4
mesNniSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.5
mesNniTxPort
The TX-port of the interface corresponding to the
NNI.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.6
mesNniRxPort
The RX-port of the interface corresponding to the
NNI.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.7
mesNniObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.8
mesNniAdminStatus
The administrative state for the object.

down - The object is de-activated.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration.…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.9
mesNniOperStatus
The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.10
mesNniIdentifier
Unique identifier for the NNI.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.11
mesNniCurrentNoOfEvcs
The current number of EVCs associated to this NNI.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.12
mesNniAvailableCapacity
Available (unused) bandwidth capacity at the NNI.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.13
mesNniDefineMgmtVlan
Procedure to define how the management
frames shall be tagged.

Sets tag type, ether type,
VLAN id and priority to be used for the
management frames.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.14
mesNniMgmtVlanTagType
Defines what Ether Type the tag applied
to the mgmt VLAN shall have.

noTag - No mgmt VLAN is active
qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
tag0x9100 - Proprietary, …
Enumerationr/w
Enumerated Values:
0noTag
1qTag0x8100
2sTag0x88a8
3tag0x9100
4macInMac
5other
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.15
mesNniMgmtVlanEtherType
Applicable if tag type is 'other'
Choose your own Ether Type.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.16
mesNniMgmtVlanVlanId
The VLAN-ID of the management VLAN.

This is a temporary modelling of mgmt VLAN for 9.1,
might be changed later.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.17
mesNniMgmtVlanPriority
Priority value for the mgmt VLAN.

This value will be used in the priority
field of the mgmt VLAN tag.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.18
mesNniMgmtVlanIpAddress
The IP address of the ethernet interface associated
with the mgmt VLAN.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.19
mesNniMgmtVlanNetMask
The IP net mask of the ethernet interface associated
with the mgmt VLAN.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.20
mesNniMgmtVlanMacAddress
The mac address of the port.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.21
mesNniSetupCommand
Do basic settings of the NNI.

Identifier can be selected.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.22
mesNniMgmtVlan
Defines whether the management VLAN is enabled or
disabled on the line port.

disabled - Management VLAN on port is disabled.

enabled - Management VLAN on is enabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.23
mesNniMacInMac
The Mac-in-Mac encapsulation that can be
enabled/disabled on the management channel.

disabled Mac-In-Mac not used on Mgmt VLAN port.

enabled Mac-In-Mac used on Mgmt VLAN port.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.24
mesNniMacInMacIsid
The I-SID is the 24-bit service instance identifier
that identifies the frame in a Provider Backbone
Network.
Unsigned32r/w
Constraints:
range: 256-16777214
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.25
mesNniMacInMacDa
The Mac-in-Mac DA is the destination backbone
Mac address.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.26
mesNniDefineMac
Define MAC attributes for this NNI.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.27
mesNniLagStatus
Defines whether a Link Aggregation Group is created
by the two lines.

disabled - no LAG is available.

enabled - the two lines belong to a LAG
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.3.1.1.28

mesEvcTable

table obsolete
.1.3.6.1.4.1.8708.2.32.2.4.1 · 1 row entry · 54 columns
Open in standard view 
The EVC list.
mesEvcEntry entry .1.3.6.1.4.1.8708.2.32.2.4.1.1
An entry in the EVC list.
Indexes
mesEvcIndex
Column Syntax OID
mesEvcIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.1
mesEvcName
The management name of the interface, for example
'evc-1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.2
mesEvcDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.3
mesEvcObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.4
mesEvcAdminStatus
The administrative state for the object.

down - The object is de-activated.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration.…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.5
mesEvcOperStatus
The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.6
mesEvcIdentifier
Unique identifier for the EVC.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.7
mesEvcUniIdentifier
The UNI ID of the local UNI terminating this EVC.

Persistent cross-reference to UNI table
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.8
mesEvcNniIdentifier
The NNI ID of the local NNI terminating this EVC.

Persistent cross-reference to NNI table
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.9
mesEvcType
The EVC type.

Currently only pointToPoint EVCs
are supported.
Enumerationr/w
Enumerated Values:
1pointToPoint
2multiPointToMultiPoint
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.10
mesEvcMtuSize
The Max Transmission Unit (MTU) Size for the EVC.
Unsigned32r/w
Constraints:
range: 1518-9600
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.11
mesEvcFrameDeliveryUnicast
Decides whether unicast frames should be
delivered, or not.

Not available in this release. Always set
to deliverUnconditionally.
Enumerationr/w
Enumerated Values:
1discard
2deliverUnconditionally
3deliverConditionally
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.12
mesEvcFrameDeliveryMulticast
Decides whether multicast frames should be
delivered, or not.

Not available in this release. Always set
to deliverUnconditionally.
Enumerationr/w
Enumerated Values:
1discard
2deliverUnconditionally
3deliverConditionally
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.13
mesEvcFrameDeliveryBroadcast
Decides whether broadcast frames should be
delivered, or not.

Not available in this release. Always set
to deliverUnconditionally.
Enumerationr/w
Enumerated Values:
1discard
2deliverUnconditionally
3deliverConditionally
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.14
mesEvcDefineL2Control
Define how L2 protocols will be handled for this
EVC.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.15
mesEvcL2ControlProtocolDisposition
Defines how the L2-protocols shall be handled
for this EVC.

discard - discard all ingress frames carrying
L2 Control Protocols.

tunnel - tunnel through the EVC.

wr…
Enumerationr/w
Enumerated Values:
1discard
2tunnel
3wrapMac
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.16
mesEvcL2DestinationMacAddress
Defines the wrapper destination MAC address
for L2 control protocols.

String representation.

Not available in this release.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.17
mesEvcCeVlanIdPreservation
If enabled, the egress CE-VLAN ID is the
same as the ingress CE-VLAN ID for a given frame.

yes - preserve CE-VLAN IDs.

no - the CE-VLAN ID may be mapped
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.18
mesEvcCosPreservation
If enabled, the egress Class of Service is the
same as the ingress Class of Service for a
given frame.

yes - preserve Class of Service.

no - Class of Service may be changed
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.19
mesEvcAssociateBwp
Create and associate ingress or egress BW
profile for the EVC.

This will create an entry in the BWP table,
unless it already exists.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.20
mesEvcReleaseBwp
Release relationship to BW profile.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.21
mesEvcIngressBwProfilePerEvc
Defines whether the ingress BW profile is applied
at the EVC level (instead of at the CoS level).

disabled - BW profiling is done per CoS

enabled - BW profiling is done at EVC level
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.22
mesEvcIngressBwp
The CoS Identifier for the ingress BW profile.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.23
mesEvcEgressBwProfilePerEvc
Defines whether the egress BW profile is applied
at the EVC level (instead of at the CoS level).

disabled - BW profiling is done per CoS

enabled - BW profiling is done at EVC level
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.24
mesEvcEgressBwp
The CoS Identifier for the egress
bandwidth profile.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.25
mesEvcCreateCeVlanIdMap
Create a new map for a CE-VLAN ID associated
with this EVC at the local UNI.

Sets the following attributes of the map:
Map type; single or range.
First CE-VLAN id and (optionally) last CE-VLAN id.
Wether …
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.26
mesEvcDefineProviderTag
Procedure to define how the service frames
shall be tagged before propagated to the MEN.

Sets the tag type, the ether type
and the VLAN id for the uplink tag.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.27
mesEvcProviderTagType
Defines what Ether Type the provider tag applied
to the EVC shall have.

qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
tag0x9100 - Proprietary, deprecated by 802.1ad
other …
Enumerationr/w
Enumerated Values:
0noTag
1qTag0x8100
2sTag0x88a8
3tag0x9100
4macInMac
5other
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.28
mesEvcProviderTagEtherType
Applicable if tag type is 'other'
Choose your own Ether Type.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.29
mesEvcProviderTagVlanId
Defines what VLAN id that shall used
at the line egress.
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.30
mesEvcDefineClassOfService
Procedure to define how Service Frames
shall be classified and given priority
within the MEN.

Not available in this release.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.31
mesEvcCoSClassification deprecated
Defines how the Class of Service of a
given Service Frame shall be decided.

Not available in this release.

manual - Hard-coded for the EVC.

cePriority - Use the Priority Code…
Enumerationr/w
Enumerated Values:
1manual
2cePriority
3dscp
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.32
mesEvcCoSPriority
Hard-coded priority value for this EVC.

This value will be set in the priority
code point field of the line egress
serice frames.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.33
mesEvcInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.34
mesEvcRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.35
mesEvcQProfile
Indicates the queue profile to use for
this EVC.
MesQProfileIdr/w
Textual Convention: MesQProfileId Enumeration
Type Values:
1strict1
2strict2
3strict3
4strict4
5strict5
6strict6
7wrr1
8wrr2
9wrr3
10wrr4
11wrr5
12wrr6
13wrr7
14wrr8
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.36
mesEvcCeVlanIdMap
Textual presentation of the CE-VLAN IDs
mapped to this EVC, e.g.: '1-4094'.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.37
mesEvcDefaultCeVlanPriority
The priority assigned at client egress if
CE-VLAN CoS preservation for the EVC in
question is disabled or when priority is set
for an UNI in transparent mode.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.38
mesEvcClientEgressTagVlanIdAssignment
Defines how the VLAN id
of a service frame shall be set
at the client egress.

set - Set to specified value.

copy - Use the VLAN id from the
original tag.
Enumerationr/w
Enumerated Values:
1set
2copy
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.39
mesEvcClientEgressTagVlanId
The client egress VLAN id.
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.40
mesEvcTagPriorityAssignment
Defines how the priority code point field
of a service frame shall be assigned
at the client egress and the line egress.

set - Set to one of the specified values.

preserve - Use the priorit…
Enumerationr/w
Enumerated Values:
1set
2preserve
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.41
mesEvcClientEgressTagTypeAssignment
Defines how the tag type
shall be assigned for client egress
service frames.

set - Set to specified value.

copy - Use the original tag.
Enumerationr/w
Enumerated Values:
1set
2copy
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.42
mesEvcClientEgressTagType
The tag type to be set at
the client egress if not copied.

qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
tag0x9100 - Proprietary, deprecated by 802.1ad
other - Select your…
Enumerationr/w
Enumerated Values:
0noTag
1qTag0x8100
2sTag0x88a8
3tag0x9100
4macInMac
5other
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.43
mesEvcClientEgressTagEtherType
Applicable if tag type is 'other'
Choose your own Ether Type.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.44
mesEvcMacInMac
The Mac-in-Mac encapsulation that can be enabled/disabled.

disabled Mac-In-Mac not used on Mgmt VLAN port.

enabled Mac-In-Mac used on Mgmt VLAN port.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.45
mesEvcMacInMacLtoC
.

disabled -

enabled -
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.46
mesEvcCopyIsid
.

disabled -

enabled -
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.47
mesEvcMacInMacIsid
The I-SID is the 24-bit service instance identifier
that identifies the frame in a Provider Backbone Net-
work.
Unsigned32r/w
Constraints:
range: 256-16777214
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.48
mesEvcMacInMacIsidLtoC
The I-SID is the 24-bit service instance identifier
that identifies the frame in a Provider Backbone
Network.
Unsigned32r/w
Constraints:
range: 256-16777214
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.49
mesEvcMacInMacDa
The Mac-in-Mac DA is the destination backbone
Mac address.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.50
mesEvcMacInMacDaLtoC
.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.51
mesEvcDefineMac
Define MAC attributes for this EVC.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.52
mesEvcIngressBwProfileModel Enumeration
Enumerated Values:
1none
2bwpPerUni
3bwpPerEvc
4bwpPerCos
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.53
mesEvcIngressBwProfileMap SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.4.1.1.54

mesCeEvcMapTable

table obsolete
.1.3.6.1.4.1.8708.2.32.2.5.1 · 1 row entry · 19 columns
Open in standard view 
The CE to EVC map list.
mesCeEvcMapEntry entry .1.3.6.1.4.1.8708.2.32.2.5.1.1
An entry in the CE EVC map list.
Indexes
mesCeEvcMapIndex
Column Syntax OID
mesCeEvcMapIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.1
mesCeEvcMapName
The management name of the map, for example
'map-1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.2
mesCeEvcMapObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.3
mesCeEvcMapType
CE-VLAN ID that shall be mapped to EVC.
Specifies the lower end of the range.
Enumerationr/w
Enumerated Values:
1single
2range
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.4
mesCeEvcMapVlanIdRangeLower
CE-VLAN ID that shall be mapped to the EVC.
Specifies the lower end of the range.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.5
mesCeEvcMapVlanIdRangeUpper
CE-VLAN ID that shall be mapped to the EVC.
Specifies the upper end of the range.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.6
mesCeEvcMapEvcId
Specifies the identifier of the EVC that the
CE-VLAN ID shall be mapped to.

Persistent cross reference.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.7
mesCeEvcMapInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.8
mesCeEvcMapRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.9
mesCeEvcMapPrio0Included
Include frames tagged with priority 0.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.10
mesCeEvcMapPrio1Included
Include frames tagged with priority 1.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.11
mesCeEvcMapPrio2Included
Include frames tagged with priority 2.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.12
mesCeEvcMapPrio3Included
Include frames tagged with priority 3.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.13
mesCeEvcMapPrio4Included
Include frames tagged with priority 4.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.14
mesCeEvcMapPrio5Included
Include frames tagged with priority 5.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.15
mesCeEvcMapPrio6Included
Include frames tagged with priority 6.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.16
mesCeEvcMapPrio7Included
Include frames tagged with priority 7.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.17
mesCeEvcMapDefaultCeVlanId
The default CE-VLAN ID for untagged frames.
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.18
mesCeEvcMapPrioIncluded
Include frames tagged with priority 0..7. Least
significant bit is 1 if prioOIncluded is yes
otherwise 0, next bit is 1 if prio1Included is
yes...
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8708.2.32.2.5.1.1.19

mesBwpTable

table
.1.3.6.1.4.1.8708.2.32.2.6.1 · 1 row entry · 16 columns
Open in standard view 
The BWP list.
mesBwpEntry entry .1.3.6.1.4.1.8708.2.32.2.6.1.1
An entry in the BWP list.
Indexes
mesBwpIndex
Column Syntax OID
mesBwpIndex
An arbitrary index assigned to each BWP entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.1
mesBwpName
The management name of the BWP, for example
'mef:1:4:id'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.2
mesBwpObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.3
mesBwpCoSIdentifier
The Class of Service identifier associated with this
profile.

This attribute can be written via SNMP.
OctetStringr/w
Constraints:
range: 1-24
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.4
mesBwpCir
The Committed Information Rate of this profile.
The average rate in bits/s up to which the
network delivers service frames and meets the
defined performance objectives.

This attribute can be written via S…
Unsigned32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.5
mesBwpCbs
The Committed Burst Size of this profile.
The maximum number of bytes available for
a burst sent at UNI speed to remain CIR-conformant.

Ex: 100 mBit/s * 100 ms = 1250 kB
1 Gbit/s * 32 ms = 4000 kB
…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.6
mesBwpEir
The Excess Information Rate of this profile.
The average rate in bits/s up to which the
network may deliver service frames without
any performance objectives.

This value must be set within certain ranges,…
Unsigned32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.7
mesBwpEbs
The Excess Burst Size of this profile.
The maximum number of bytes available for
a burst sent at UNI speed to remain EIR-conformant.

Ex: 100 mBit/s * 100 ms = 1250 kB
1 Gbit/s * 32 ms = 4000 kB
1 Gbit/…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.8
mesBwpCouplingFlag
The Coupling Flag for this profile.
Unsigned32
Constraints:
range: 0-1
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.9
mesBwpColorMode
In color blind mode, the outgoing frame color is
based only on the profile status of each bucket. In
color aware mode, the outgoing frame color is based
on the incoming color and the profile status of each
bucket. The i…
Enumerationr/w
Enumerated Values:
1colorAware
2colorBlind
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.10
mesBwpInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.11
mesBwpRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
This attribute can be writ…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.12
mesBwpServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.13
mesBwpPolicerId
Unique persistent identifier for MEF policer and Internal reference for
the MEF policer in the traffic unit.
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.14
mesBwpSubrack
The number of the subrack where the policer is located.
LUM-TCSubrackNumberr/w
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.15
mesBwpSlot
The number of the slot where the policer is located.
LUM-TCSlotNumberr/w
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.6.1.1.16

mesQProfileTable

table obsolete
.1.3.6.1.4.1.8708.2.32.2.7.1 · 1 row entry · 13 columns
Open in standard view 
The queue profile list.
mesQProfileEntry entry .1.3.6.1.4.1.8708.2.32.2.7.1.1
An entry in the queue profile list.
Indexes
mesQProfileIndex
Column Syntax OID
mesQProfileIndex
An arbitrary index assigned to each Q Profile entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.1
mesQProfileName
The management name of the queue profile,
for example 'wrr1:1:3'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.2
mesQProfileObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.3
mesQProfileId
Queue profile id.
MesQProfileId
Textual Convention: MesQProfileId Enumeration
Type Values:
1strict1
2strict2
3strict3
4strict4
5strict5
6strict6
7wrr1
8wrr2
9wrr3
10wrr4
11wrr5
12wrr6
13wrr7
14wrr8
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.4
mesQProfileType
Type of queue profile.
Enumeration
Enumerated Values:
1strictPriority
2roundRobin
3weightedRoundRobin
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.5
mesQProfileWeight
The weight for this queue profile.

Only applicable for weighted round-robin
type of queues.
Unsigned32r/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.6
mesQProfileGreenLowThreshold
Low threshold queue size in bytes
for frames classified as green.
Unsigned32r/w
Constraints:
range: 9600-524288
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.7
mesQProfileGreenHighThreshold
High threshold queue size in bytes
for frames classified as green.
Unsigned32r/w
Constraints:
range: 9600-524288
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.8
mesQProfileGreenDropProbability
The probability for frames classified
as green to be dropped when exceeding
the low threshold.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.9
mesQProfileYellowLowThreshold
Low threshold queue size in bytes for
frames classified as yellow.
Unsigned32r/w
Constraints:
range: 9600-524288
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.10
mesQProfileYellowHighThreshold
High threshold queue size in bytes for
frames classified as yellow.
Unsigned32r/w
Constraints:
range: 9600-524288
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.11
mesQProfileYellowDropProbability
The probability for frames classified
as yellow to be dropped when exceeding
the low threshold.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.12
mesQProfileInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.7.1.1.13

mesMepTable

table obsolete
.1.3.6.1.4.1.8708.2.32.2.8.1 · 1 row entry · 25 columns
Open in standard view 
The maintenance entity group end point (MEP) list.
mesMepEntry entry .1.3.6.1.4.1.8708.2.32.2.8.1.1
An entry in the MEP list.
Indexes
mesMepIndex
Column Syntax OID
mesMepIndex
An arbitrary index assigned to each MEP entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.1
mesMepName
The management name of the maintenance entity
group end point, for example 'mep:evc:1:1:3'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.2
mesMepObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.3
mesMepInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.4
mesMepMeIdentifier
The identifier for the object associated
with this MEP.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.5
mesMepAdminStatus
The administrative state for the object.

down - The object is de-activated.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration.…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.6
mesMepOperStatus
The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.7
mesMepTransmissionInterval
Transmission interval in milliseconds.
Rounded up to the nearest supported value.

3 ms (not yet supported)
10 ms (not yet supported)
100 ms (not yet supported)
1 s
10 s
1 min
10 min
Unsigned32r/w
Constraints:
range: 3-600000
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.8
mesMepLossOfContinuity
Loss of continuity.

A: Continuity check messages are not received
from the peer MEP within 3.5 times the
transmission interval.

D: Messages are recevied from the peer MEP.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.9
mesMepUnexpectedMegId
Unexpected MEG identity.

A: The received OAM messages contains an
unexpected MEG identity.

D: The OAM messages contains an
expected MEG identity.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.10
mesMepUnexpectedTransmissionInterval
Unexpected transmission interval.

A: The recevied OAM messages contains an
unexpected transmission interval.

D: The OAM messages contains the
expected transmission interval.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.11
mesMepRemoteDefectIndication
Remote defect indication.

A: The recevied OAM messages contains a
remote defect indication.

D: Remote defect indication is not
received.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.12
mesMepUnexpectedOpCode
Unexpected operation code.

A: The recevied OAM messages contains an
unexpected operation code.

D: The OAM messages contains an
expected operation code.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.13
mesMepAlarmIndicationSignal
Alarm indication signal.

A: The received OAM messages contains an
alarm indication signal.

D: Alarm indication signal is not
received.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.14
mesMepMegIdFormatReceived
The Management Entity Group (MEG) identifier
format. The MEG identifier is a 48 octet string
used to identify the maintenance entity group.

icc - ITU Carrier Code (ICC)-based format:
Byte 1 is set to 1.
B…
Enumeration
Enumerated Values:
0other
32icc
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.15
mesMepMegIdIccReceived
The received Management Entity Group (MEG)
identifier in ICC-based format. Composed of ICC,
1-6 characters, followed by a unique MEG id code
consisting of 7-12 characters.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.16
mesMepMegIdReceived
The received Management Entity Group (MEG)
identifier. A 48 octet identifier that should be
globally unique.
OctetString
Constraints:
range: 48-48
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.17
mesMepId
The MEG end points own identity in the MEG.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.18
mesMepIdExpected
The expected received MEG end point identity.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.19
mesMepIdReceived
The recevied MEG end point identity.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.20
mesMepUnexpectedMepId
Unexpected received MEP identity.

A: The received OAM messages contains an
unexpected MEP id.

D: The OAM messages contains an
expected MEP id.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.21
mesMepUnexpectedMegLevel
Unexpected received MEP identity.

A: The received OAM messages contains an
unexpected MEG level.

D: The OAM messages contains an
expected MEG level.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.22
mesMepMegId
The Management Entity Group (MEG) identifier. A
48 octet identifier that should be globally
unique.
OctetStringr/w
Constraints:
range: 48-48
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.23
mesMepMegIdFormat
The Management Entity Group (MEG) identifier
format. The MEG identifier is a 48 octet string
used to identify the maintenance entity group.

icc - ITU Carrier Code (ICC)-based format:
Byte 1 is set to 1.
B…
Enumerationr/w
Enumerated Values:
32icc
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.24
mesMepMegIdIcc
The Management Entity Group (MEG) identifier
in ICC-based format.
Composed of ICC, 1-6 characters, followed by
a unique MEG id code consisting of 7-12
characters.
OctetStringr/w
Constraints:
range: 0-13
 .1.3.6.1.4.1.8708.2.32.2.8.1.1.25

mesMegTable

table obsolete
.1.3.6.1.4.1.8708.2.32.2.9.1 · 1 row entry · 8 columns
Open in standard view 
The maintenance entity group (MEG) list.
mesMegEntry entry .1.3.6.1.4.1.8708.2.32.2.9.1.1
An entry in the MEG list.
Indexes
mesMegIndex
Column Syntax OID
mesMegIndex
An arbitrary index assigned to each MEG entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.9.1.1.1
mesMegName
The management name of the maintenance entity
group, for example 'meg:1:2'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.9.1.1.2
mesMegObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.9.1.1.3
mesMegInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.9.1.1.4
mesMegAdminStatus
The administrative state for the object.

down - The object is de-activated.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration.…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.9.1.1.5
mesMegOperStatus
The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.9.1.1.6
mesMegLevel
MEG level.
Used to identify OAM flows where MEGs are nested.
By convention the following levels are used:

0-2 Provider role
3-4 Provider role
5-7 Customer role
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.9.1.1.10
mesMegUnexpectedMessage
Unexpected received OAM message.

A: An unexpected OAM message is received.

D: An expected OAM message is received.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.9.1.1.11

mesMiscTable

table
.1.3.6.1.4.1.8708.2.32.2.10.1 · 1 row entry · 45 columns
Open in standard view 
The misc group list.
mesMiscEntry entry .1.3.6.1.4.1.8708.2.32.2.10.1.1
An entry in the Misc list.
Indexes
mesMiscIndex
Column Syntax OID
mesMiscIndex
An arbitrary index assigned to each Misc entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.1
mesMiscName
The management name of the misc group, for example
'misc:1:2'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.2
mesMiscObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.3
mesMiscInternalReference
For internal use only.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.4
mesMiscAdminStatus
The administrative state for the object.

down - The object is de-activated. For a CU-less
system, admin status cannot be set to 'up' or
'service' if mgmt VLAN IP address or netmask is not
configured.
…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.5
mesMiscOperStatus
The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.6
mesMiscMgmtVlanIpAddress
The IP address of the ethernet interface associated
with the mgmt VLAN.

Set to 0.0.0.0 if not used.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.7
mesMiscMgmtVlanNetMask
The IP net mask of the ethernet interface associated
with the mgmt VLAN.

Set to 0.0.0.0 if not used.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.8
mesMiscMgmtVlanMacAddress0
The mac address of eth0.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.9
mesMiscMgmtVlanMacAddress1
The mac address of eth1.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.10
mesMiscMgmtVlanMacAddress2
The mac address of eth2.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.11
mesMiscConfigureAddress
Change the IP address and netmask.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.12
mesMiscMgmtVlanNode
Indicates if mgmt VLAN is enabled in equipment-node
mib.

Note that if mgmt VLAN is disabled in node, it
overrides Misc/Administrative status.
(to change this setting, go to System/Equipment)
…
Enumeration
Enumerated Values:
1off
2bridge2dcn
3on
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.13
mesMiscMacAgeing
The MAC table ageing time in seconds.
Unsigned32r/w
Constraints:
range: 10-1000000
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.14
mesMiscMacGetTable
Get MAC address table. It is possible to filter the MAC table per port,
per VLAN and per MAC address. The MAC address field also allows regular
expressions.

To search for Infinera MAC addresses, enter the…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.15
mesMiscNoOfMegs
The current number of MEGs associated with this
board.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.16
mesMiscAssociateMeg
Create and associate a MEG (MAID) for the board.

Identifier - A unique user defined identifier for the MEG.

Level - Maintenance domain level.

CCM interval - Interval between …
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.17
mesMiscNoOfErps
The current number of ERPs associated with this
board.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.18
mesMiscAssociateErp
Create and associate an ERP (Ethernet Ring Protection) for the board.

VLAN ID - The VLAN ID that carries the control messages. The
VLAN ID is also used to uniquely define the rin…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.19
mesMiscL2Mode
The initial mode (switch or aggregator) of the board.

Switch - All ports are acting as NNI and all ports are trusted.

Aggregator - 1G ports are acting as UNI and 10G ports are acting as…
Enumeration
Enumerated Values:
1switch
2aggregator
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.20
mesMiscConfigureMode
Defines if the board should be acting as a switch or an aggregator.

Switch - All ports are acting as NNI and all ports trust each other.

Aggregator - 1G ports are acting as UNI and 10G …
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.21
mesMiscIdentity
For internal use only.
SNMPv2-SMICounter64r/w
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.22
mesMiscAssociateClass
Create a classification to be used in a policy.

Classification enables dynamic assignment of actions (rules) when
traffic is received or before traffic is sent.
The classification defines the traffic matc…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.23
mesMiscAssociateBwp
Create a MEF Policer.

CIR (Commited Information Rate)
The average rate in bits/s up to which the network delivers
service frames and meets the defined performance objectives.

CBS (Commited …
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.24
mesMiscWred
Defines if WRED (Weighted Random Early Detection) is
enabled on the board.

disabled - WRED is disabled on the board.

enabled - WRED is enabled on the board.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.25
mesMiscGetPacketMonitor
Get data packet(s) from a specified interface. The monitor function
waits for a user defined maximum number of packets and for a user
defined maximum number of seconds.

Only the initial 128 octets of each…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.26
mesMiscSfpPortUsageCurrent
Indicates if the 1 Gbe port is connected to the front panel or
is connected to the CPU for mgmt VLAN.
Only applicable for emxp40Gii.

external - The 1 GbE port is connected to the front.
mgmt VL…
Enumeration
Enumerated Values:
1external
2mgmtVlan
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.27
mesMiscSfpPortUsageNext
Indicates usage of the 1 Gbe port after a cold start of the board.
Only applicable for emxp40Gii.

external - The 1 GbE port will be connected to the front.
mgmt VLAN will be disabled on the boa…
Enumerationr/w
Enumerated Values:
1external
2mgmtVlan
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.28
mesMiscAssociateErrorProp
Internal dialog command for configuring and create an Error Propagation rule.
Select the following:
- Trigger type
- Trigger MEP or Port depending on trigger type
- Action type
- Action MEP or Port depending on action t…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.29
mesMiscNoOfErpV2s
The current number of ERPV2s associated with this
board.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.30
mesMiscAssociateErpV2
Create and associate an ERP V2 (Ethernet Ring Protection V2) for the board.

Ring ID - The Ring Id and VLAN Id is used to uniquely define
the ring.
VLAN ID - The VLAN ID t…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.31
mesMiscAssociateVlanProt
Dialog command for create and configuring a VLAN Protection Group.
The VLAN protection group is used for the EPR V2 ring protection
to define the VLAN protected by the ring.
Select the following:
Identifier - U…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.32
mesMiscCreateVlan
Dialog command for create and configuring a VLAN Map Entry
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.33
mesMiscEnablePtp1588
Enable precision time protocol 1588v2 transparent clock on all ports.

disabled - ptp 1588v2 transparent clock is disabled

enabled - ptp 1588v2 transparent clock is enabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.34
mesMiscEnableStpMgmtVlan
Enable spanning tree protocol for management vlan on all ports.

disabled - spanning tree protocol for mangagement vlan is disabled

enabled - panning tree protocol for mangagement vlan is en…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.35
mesMiscAssociateClassAdvanced
Create a classification to be used in a policy.

Classification enables dynamic assignment of actions (rules) when
traffic is received or before traffic is sent.
The classification defines the traffic matc…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.36
mesMiscAssociateErpAdvanced
Create and associate an ERP V2 (Ethernet Ring Protection V2) for the board.

Ring ID - The Ring Id and VLAN Id is used to uniquely define
the ring.
VLAN ID - The VLAN ID t…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.37
mesMiscAssociateMegAdvanced
Create and associate a MEG (MAID) for the board.

Identifier - A unique user defined identifier for the MEG.

Level - Maintenance domain level.

CCM interval - Interval between …
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.38
mesMiscCreateClass
Dialog command for creating a classifier.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.39
mesMiscCreateAction
Dialog command for creating an action.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.40
mesMiscCreateMeg
Dialog command for creating a MEG.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.41
mesMiscCreateMep
Dialog command for creating a MEP.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.42
mesMiscCreateErrorProp
Dialog command for creating an error propagation.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.43
mesMiscCreatePolicer
Dialog command for creating a policer.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.44
mesMiscResendConfig
Dialog command to send a specific configuration.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.10.1.1.45

mesEvcBwpMapTable

table obsolete
.1.3.6.1.4.1.8708.2.32.2.11.1 · 1 row entry · 9 columns
Open in standard view 
The BWP to EVC map list.
mesEvcBwpMapEntry entry .1.3.6.1.4.1.8708.2.32.2.11.1.1
An entry in the CE EVC map list.
Indexes
mesEvcBwpMapIndex
Column Syntax OID
mesEvcBwpMapIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.11.1.1.1
mesEvcBwpMapName
The management name of the map, for example
'map-1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.11.1.1.2
mesEvcBwpMapObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.11.1.1.3
mesEvcBwpMapEvcId
The management name of the map, for example
'map-1'.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.11.1.1.4
mesEvcBwpMapBwpId
The management name of the map, for example
'map-1'.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.11.1.1.5
mesEvcBwpMapModel Enumerationr/w
Enumerated Values:
1none
2bwpPerUni
3bwpPerEvc
4bwpPerCos
 .1.3.6.1.4.1.8708.2.32.2.11.1.1.6
mesEvcBwpMapPriority
CE-VLAN ID that shall be mapped to the EVC.
Specifies the lower end of the range.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.11.1.1.7
mesEvcBwpMapInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.11.1.1.8
mesEvcBwpMapRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.11.1.1.9

mesPortTable

table
.1.3.6.1.4.1.8708.2.32.2.12.1 · 1 row entry · 99 columns
Open in standard view 
The Port list.
mesPortEntry entry .1.3.6.1.4.1.8708.2.32.2.12.1.1
An entry in the Port list.
Indexes
mesPortIndex
Column Syntax OID
mesPortIndex
An arbitrary index assigned to each Port entry.
The index is read-only and persistent, i.e the index
is kept over reboot and backed up by stable storage.
Unsigned32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.1
mesPortName
The management name of the interface, for example
'port:1:2:1-2'.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.2
mesPortDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.3
mesPortSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumberr/w
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.4
mesPortSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumberr/w
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.5
mesPortTxPort
The TX-port of the interface.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.6
mesPortRxPort
The RX-port of the interface.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.7
mesPortAdminStatus
The administrative state for the object.

down - The object is de-activated.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration.…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.8
mesPortOperStatus
The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.9
mesPortMtuSize
Max Transmission Unit (MTU) Size in bytes for the
Port.
Unsigned32r/w
Constraints:
range: 1518-10248
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.10
mesPortTagType
Defines what Ether Type the tag applied to the port
shall have.

qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
other - Select your own ether type
Enumerationr/w
Enumerated Values:
1qTag0x8100
2sTag0x88a8
5other
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.11
mesPortNoOfVlans
The current number of VLANs associated with this
port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.12
mesPortVlanAware
Define VLAN awareness on the port. A VLAN aware
port will strip of the VLAN tag (if any) on ingress
and classify the frame to this VLAN ID. A VLAN
unaware port will classify the frame to the Native
VLAN ID.
…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.13
mesPortVlanTagged
Defines whether VLAN tagged frames are
accepted. The port must be VLAN aware to understand
tagged frames.

Access ports (UNI) admit all frames (untagged and
tagged), whereas trunk ports (NNI) admit only ta…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.14
mesPortVlanUntagged
Defines whether untagged frames are accepted. The
port must be VLAN aware to understand tagged frames.

no - Untagged frames are discarded.

yes - Untagged frames are accepted.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.15
mesPortIngressFiltering
Controls if frames are VLAN filtered on
ingress. The port must be VLAN aware to understand
tagged frames.

no - No filtering of frames.

yes - Frames that are classified to a VLAN that does
…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.16
mesPortEgressTag
Controls if frames are transmitted VLAN tagged.

Access ports (UNI) do not egress tag whereas trunk
ports (NNI) tag on egress.

no - Transmit untagged, i.e. do not add tag on
egress.
…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.17
mesPortDefaultCeVlanId
Native VLAN ID assigned to untagged frames. The
default VLAN is also the untagged VLAN for the
port.

0 means that no Push VLAN ID is used.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.18
mesPortAssociateVlan
Associate VLAN ID (or range of VLAN IDs) to this port.

VLAN ID - VLAN ID that shall be mapped to the ports

Ports - Specifies the ports belonging to the VLAN followed by the L2 por…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.19
mesPortReleaseVlan
Remove all VLANs from the port.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.20
mesPortActingAsLine
Defines if port is acting as line or client.

disabled - port is acting as client.

enabled - port is acting as line.
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.21
mesPortTrustedPortmask
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.22
mesPortConfigureTrustedPortmask
Select the ports that shall be trusted by this port.

Enter trusted ports as a comma separated list of tx ports, ex:'1,3,9-13' or none, -, all or LAG name.
When specifying a range with numbers the own tx p…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.23
mesPortMacAddress
The mac address of the port.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.24
mesPortLagStatus
The Link Aggregation Group (LAG) status

noLag - port does not belong to a LAG

master - port is master in a LAG

slave - port is slave in a LAG
Enumeration
Enumerated Values:
1noLag
2master
3slave
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.25
mesPortLagPortmask
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.26
mesPortAssociateLag
Creates a Link Aggregation Group (LAG). The
selected ports will be used as 'slaves' in the LAG.

Ports that are used in Ethernet Ring Protection
(ERP) are not available for LAG.

The selected…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.27
mesPortTxEthUtilization
Shows a snapshot of the current bandwidth
utilization of the transmitted ethernet signal
during the last second.
Unsigned32
Constraints:
range: 0-1000
range: 2147483646-2147483646
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.28
mesPortRxEthUtilization
Shows a snapshot of the current bandwidth
utilization of the received ethernet signal during
the last second.
Unsigned32
Constraints:
range: 0-1000
range: 2147483646-2147483646
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.29
mesPortFlowControlMode
The mode for handling flow control between
the local device and link partner.

The PAUSE settings has the following meaning
when auto-negotiation is enabled.

Setting 802.3 equivalent
----…
Enumerationr/w
Enumerated Values:
1noPause
2rxPause
3txPause
4bothPause
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.30
mesPortAutoNegotiationMode
The wanted auto negotiation mode.

off - auto negotiation process is disabled

on - auto negotiation process is enabled
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.31
mesPortAutoNegotiationStatus
The result of the auto negotiation procedure

incomplete - the result is still pending

halfDuplex - half duplex

fullDuplex - full duplex

halfDuplexRxPauseOn - h…
Enumeration
Enumerated Values:
1incomplete
2halfDuplex
3fullDuplex
4halfDuplexRxPauseOn
5halfDuplexTxPauseOn
6halfDuplexRxTxPauseOn
7fullDuplexRxPauseOn
8fullDuplexTxPauseOn
9fullDuplexRxTxPauseOn
10fullDuplexFec
11fec
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.32
mesPortLinkDown
A: Failure to negotiate a connection with the
other party.

D: A connection is negotiated.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.33
mesPortLinkFaultRemote
Remote link fault. IEEE 802.3ah

A: Active remote link fault indication.

D: Inactive remote link fault indication.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.34
mesPortLinkFaultLocal
Local link fault. IEEE 802.3ah

A: Active local link fault indication.

D: Inactive local link fault indication.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.35
mesPortNoOfShapers
The current number of shapers associated with this
port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.36
mesPortNoOfPolicers
The current number of policers associated with this
port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.37
mesPortAssociateShaper
Create and associate an egress shaper for the port.

Traffic shaping retains excess packets in a queue and then
schedules the excess for later transmission.

Identifier - The name of the sh…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.38
mesPortReleaseShaper
Remove all shapers associated to the port.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.39
mesPortAssociatePolicer
Create and associate an ingress policer for the port.

Traffic policing propagates bursts. When the traffic rate reaches the
configured maximum rate, excess traffic is dropped.

Identifier - …
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.40
mesPortReleasePolicer
Remove all policers associated to the port.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.41
mesPortRestartAutoNegotiation
Issue a restart of the auto-negotiation process, regardless of
the current state.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.42
mesPortConfigureLine
Procedure to define if the port is acting as line or client.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.43
mesPortEtherType
Applicable if tag type is 'other'
Choose your own Ether Type.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.44
mesPortConfigureEtherType
Procedure to define how frames shall be tagged.

Sets tag type and ether type settings to be used for
the frames.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.45
mesPortNoOfMirrorSources
The current number of mirroring sources associated
with this port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.46
mesPortMirroring
The mirroring status of the port

disabled - port is not mirrored to an analyzer port

enabled - port is mirrored to an analyser port
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.47
mesPortIngressPushTag
Controls if the port pushes (adds) a VLAN tag on
ingress. Setting this attribute enables double
tagging as port becomes VLAN unaware. In this mode
the port will always push the Native VLAN ID.

Q-in-Q is …
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.48
mesPortEgressPopTag
Controls if the port pops (removes) the VLAN tag on
egress.

Access ports (UNI) pops tag on egress whereas trunk
ports (NNI) does not.

yes - Pop tag on egress.

no - Do not…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.49
mesPortDefaultCeVlanPriority
Priority for the default CE-VLAN ID. Priority is
only valid for untagged traffic when 'priority
assignment' is 'copy'.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.50
mesPortConfigureTagRule
VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. Currently, only
VLAN classification is possible.

Classification

The classification defines the traffi…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.51
mesPortCosProfile
The COS Queue profile to which this port belongs.
Enumerationr/w
Enumerated Values:
1profile1
2profile2
3profile3
4profile4
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.52
mesPortMode
Defines the mode in which the port operates.

uni - User Network Interface. The port is an access
port. This setting treats all ingress frames
as untagged. I.e. untagged, priority tagged,
…
Enumerationr/w
Enumerated Values:
1uni
2uniMux
3nni
4userDefined
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.53
mesPortPrioAssignment
Defines how the priority is assigned when pushing
VLAN ID on ingress.

set - Set to specified value.

copy - Use the priority from the ingress tag.
Enumerationr/w
Enumerated Values:
1set
2copy
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.54
mesPortConfigurePrioAssignment
Defines if the priority is copied from ingress tag
or set to a specific value.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.55
mesPortNoOfTagRules
The current number of VLAN tag rules associated
with this port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.56
mesPortNoOfVlanSchedPrios deprecated
The current number of VLAN schedule priorities
associated with this port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.57
mesPortObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.58
mesPortHighBitErrorRate
High bit error rate (Hi-Ber). IEEE 802.3ah

A: Active high bit error rate.

D: Inactive high bit error rate.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.59
mesPortIdx
Internal object reference
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.60
mesPortIfNo
The interface number of the multi-connector port or port group.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.61
mesPortClientIdx
Internal object reference client interface.
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.62
mesPortUpPortId
Internal port reference for traffic unit.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.63
mesPortLagPortmaskIf1
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.64
mesPortLagPortmaskIf2
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.65
mesPortLagPortmaskIf3
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.66
mesPortLagPortmaskIf4
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.67
mesPortLagPortmaskIf5
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.68
mesPortLagPortmaskIf6
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.69
mesPortLagPortmaskIf7
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.70
mesPortLagPortmaskIf8
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.71
mesPortAutoNegMasterSlaveCfg
1000BASE-T PHYs shall provide support for Auto-Negotiation (802.3-2015 Clause 28) and shall be capable of
operating as master or slave. This relationship is necessary for establishing the timing control of each PHY.
The…
Enumerationr/w
Enumerated Values:
0auto
1master
2slave
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.72
mesPortAutoNegMasterSlaveStatus
The result of the auto negotiation master-slave procedure

undefined - not possible to read attribute at the moment or
resolution of negotiation is still pending
master - Local PHY configura…
Enumeration
Enumerated Values:
0undefined
1master
2slave
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.73
mesPortLagPortmaskIf9
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.74
mesPortLagPortmaskIf10
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.75
mesPortLagPortmaskIf11
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.76
mesPortLagPortmaskIf12
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.77
mesPortLagPortmaskIf13
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.78
mesPortLagPortmaskIf14
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.79
mesPortLagPortmaskIf15
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.80
mesPortLagPortmaskIf16
Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.81
mesPortCreateVlanTagClass
Create and associate a class to a Vlan Rule Tag.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.82
mesPortCreateTagRuleWoutClass
VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. Currently, only
VLAN classification is possible.

Classification

The classification defines the traffi…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.83
mesPortTrustedPortmaskIf2
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.84
mesPortTrustedPortmaskIf3
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.85
mesPortTrustedPortmaskIf4
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.86
mesPortTrustedPortmaskIf5
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.87
mesPortTrustedPortmaskIf6
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.88
mesPortTrustedPortmaskIf7
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.89
mesPortTrustedPortmaskIf8
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.90
mesPortTrustedPortmaskIf9
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.91
mesPortTrustedPortmaskIf10
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.92
mesPortTrustedPortmaskIf11
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.93
mesPortTrustedPortmaskIf12
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.94
mesPortTrustedPortmaskIf13
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.95
mesPortTrustedPortmaskIf14
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.96
mesPortTrustedPortmaskIf15
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.97
mesPortTrustedPortmaskIf16
Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.98
mesPortServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.12.1.1.99

mesVlanMapTable

table
.1.3.6.1.4.1.8708.2.32.2.13.1 · 1 row entry · 34 columns
Open in standard view 
The VLAN to port map list.
mesVlanMapEntry entry .1.3.6.1.4.1.8708.2.32.2.13.1.1
An entry in the VLAN map list.
Indexes
mesVlanMapIndex
Column Syntax OID
mesVlanMapIndex
An arbitrary index assigned to each VLAN entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.1
mesVlanMapName
The management name of the map, for example
'map:1:3:4090-4094'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.2
mesVlanMapVlanIdRangeLower
VLAN ID that shall be mapped to the ports.
Specifies the lower end of the range.
This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.3
mesVlanMapVlanIdRangeUpper
VLAN ID that shall be mapped to the ports.
Specifies the upper end of the range.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.4
mesVlanMapInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.5
mesVlanMapPortmask
Specifies the ports belonging to the VLAN (VLAN range). The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.

This attribute can be written via …
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.6
mesVlanMapConfigurePortMask
Change the ports belonging to this VLAN.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.7
mesVlanMapLearning
Defines what type of learning the VLAN shall have.

off - no learning
on - independent learning

This attribute can be written via SNMP.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.8
mesVlanMapEtherType
Specifies the ether type of the VLAN.

qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag

This attribute can be written via SNMP.
Enumerationr/w
Enumerated Values:
1qTag0x8100
2sTag0x88a8
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.9
mesVlanMapRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.10
mesVlanMapDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.11
mesVlanMapTrustPorts
Trust all ports in the VLAN.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.12
mesVlanMapRings
List of Ring Indexs of protecting ERP v2 rings.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.13
mesVlanMapServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.14
mesVlanMapPortmaskIf1
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.15
mesVlanMapPortmaskIf2
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.16
mesVlanMapPortmaskIf3
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.17
mesVlanMapPortmaskIf4
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.18
mesVlanMapPortmaskIf5
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.19
mesVlanMapPortmaskIf6
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.20
mesVlanMapPortmaskIf7
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.21
mesVlanMapPortmaskIf8
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.22
mesVlanMapPrepareConfigPortMask
Converts portmasks to input for dialog configurePortMask
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.23
mesVlanMapPortmaskIf9
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.24
mesVlanMapPortmaskIf10
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.25
mesVlanMapPortmaskIf11
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.26
mesVlanMapPortmaskIf12
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.27
mesVlanMapPortmaskIf13
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.28
mesVlanMapPortmaskIf14
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.29
mesVlanMapPortmaskIf15
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.30
mesVlanMapPortmaskIf16
Specifies the ports belonging to the VLAN (VLAN range).
There is one port mask for each interface.
The least significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.31
mesVlanMapSubrack
The number of the subrack where the VLAN is located.
LUM-TCSubrackNumberr/w
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.32
mesVlanMapSlot
The number of the slot where the VLAN is located.
LUM-TCSlotNumberr/w
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.33
mesVlanMapMacLearningLimit
Max number of MAC address entries if VLAN learning is turned on.
Value: 0 is only for internal use.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-262143
 .1.3.6.1.4.1.8708.2.32.2.13.1.1.34

mesMgmtVlanTable

table
.1.3.6.1.4.1.8708.2.32.2.14.1 · 1 row entry · 20 columns
Open in standard view 
The MGMT VLAN list.
mesMgmtVlanEntry entry .1.3.6.1.4.1.8708.2.32.2.14.1.1
An entry in the mgmt vlan list.
Indexes
mesMgmtVlanIndex
Column Syntax OID
mesMgmtVlanIndex
An arbitrary index assigned to each MGMT VLAN entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.1
mesMgmtVlanName
The management name of the interface, for example
'mgmtVlan:1:2:1-2'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.2
mesMgmtVlanDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.3
mesMgmtVlanSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.4
mesMgmtVlanSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.5
mesMgmtVlanTxPort
The TX-port of the interface.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.6
mesMgmtVlanRxPort
The RX-port of the interface.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.7
mesMgmtVlanObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.8
mesMgmtVlanAdminStatus
The administrative state for the object.

down - The object is de-activated.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration.…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.9
mesMgmtVlanConfigure
Procedure to define how the management
frames shall be tagged.

Sets tag type, ether type, VLAN id, priority
and Mac-In-Mac settings to be used for the
management frames. Note! tag type, priority
and Mac-I…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.10
mesMgmtVlanTagType
Defines what Tag Type the tag applied
to the mgmt VLAN shall have.

qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
Enumerationr/w
Enumerated Values:
1qTag0x8100
2sTag0x88a8
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.11
mesMgmtVlanEtherType
A two-octet value for the Ether Type in the ethernet frame.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.12
mesMgmtVlanVlanId
The VLAN-ID of the management VLAN.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.13
mesMgmtVlanPriority
Priority value for the mgmt VLAN.

This value will be used in the priority
field of the mgmt VLAN tag.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.14
mesMgmtVlanMacInMac
The Mac-in-Mac encapsulation that can be enabled/disabled.

disabled Mac-In-Mac not used on Mgmt VLAN port.

enabled Mac-In-Mac used on Mgmt VLAN port.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.15
mesMgmtVlanMacInMacIsid
The I-SID is the 24-bit service instance identifier
that identifies the frame in a Provider Backbone Net-
work.
Unsigned32r/w
Constraints:
range: 256-16777214
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.16
mesMgmtVlanMacInMacDa
The Mac-in-Mac DA is the destination backbone
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.17
mesMgmtVlanForceMgmtVlan
Force Mgmnt VLAN

When disabled, Mgmnt VLAN will lose connectivity when
fault is detected on the incoming line (Loss of Signal,
Far End Client Fail, Alarm Indication Signal,
Local Fault, Remote Fault)
When…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.18
mesMgmtVlanRings
List of ERPv2 ring indexes of protecting rings for managment vlan,
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.19
mesMgmtVlanIfNo
The interface number of the multi-connector port or port group.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.14.1.1.20

mesLagTable

table
.1.3.6.1.4.1.8708.2.32.2.15.1 · 1 row entry · 45 columns
Open in standard view 
The LAG group list.
mesLagEntry entry .1.3.6.1.4.1.8708.2.32.2.15.1.1
An entry in the LAG list.
Indexes
mesLagIndex
Column Syntax OID
mesLagIndex
An arbitrary index assigned to each LAG entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.1
mesLagName
The management name of the LAG group, for example
'lag:1:2:1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.2
mesLagInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.3
mesLagPortmask
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.4
mesLagMasterIndex
The port that is master in the LAG.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.5
mesLagConfigure
Change the members and hash algorithm in the Link
Aggregation Group.

Ports that are used in Ethernet Ring Protection
(ERP) are not available for LAG.

Changing the hash algorithm will affect…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.6
mesLagHash
The hash algorithm used for LAG load balancing

mac - Based on src/dst MAC adresses

ip - Based on src/dst IP addresses and TCP/UDP ports

vlan - Based on VLAN ID
…
Enumerationr/w
Enumerated Values:
1mac
2ip
3vlan
4mpls
5automatic
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.7
mesLagIdentifier
Unique identifier for the LAG.

This attribute can be written via SNMP.
OctetStringr/w
Constraints:
range: 1-17
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.8
mesLagRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
This attribute can be writ…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.9
mesLagLacpEnabled
Enables LACP for the LAG.

Passive - Passive LACP indicates the ports preference for not transmitting LACPDUs unless
its Partners control value is Active LACP (i.e., a preference not to speak unless spoken…
Enumerationr/w
Enumerated Values:
0off
1passive
2active
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.10
mesLagLacpSystemPriority
System priority -

The system priority of the system. A lower value indicates a higher priority [0...65535]
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.11
mesLagLacpPeriod
LACP period

slow - LACP messages are received using a 30 second transmission interval with a timeout of 90 seconds.
fast - LACP messages are received using a one second transmission interval with a timeou…
Enumerationr/w
Enumerated Values:
0slow
1fast
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.12
mesLagLacpLinkProtection deprecated
LACP link protection

normal - The load is distributed on all links in the LAG.
onePlusOne - All traffic is carried by the primary link while the other is used as a standby link in case of failure on the p…
MesLacpLinkProtectionValuer/w
Textual Convention: MesLacpLinkProtectionValue Enumeration
Type Values:
0normal
1onePlusOne
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.13
mesLagDegraded
LAG degraded

Alarm - One or more of the links have link and/or LACP fault.

Ok - All links and LACP (if used) are up.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.14
mesLagFailure
LAG failure

Alarm - All of the links have link and/or LACP fault.

Ok - At least one link and LACP (if used) is up.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.15
mesLagLacpMaxNumberOfActiveLinks
Define the maximum number of active links within a LAG.
The range is normally from 1 to 8 (0 is though set if McLAG is
disabled/removed from the LAG).
If the maximum number of active links equals to the number
of ports …
Unsigned32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.16
mesLagNoOfPorts
The number of ports in LAG.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.17
mesLagLacpMinNumberOfActiveLinks
Define the minimum number of active links within a LAG.
The range is normally from 1 to 8 (0 is though set if McLAG is
disabled/removed from the LAG).
Unsigned32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.18
mesLagIsMcLag
If Lag is MC Lag.
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.19
mesLagConfigureTagRule
VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. Currently, only
VLAN classification is possible.

Classification

The classification defines the traffi…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.20
mesLagNoOfTagRules
The current number of VLAN tag rules associated
with this lag.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.21
mesLagDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.22
mesLagAdminStatus
The administrative state for the object.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When service is concluded
adminStatus should be s…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.23
mesLagOperStatus
The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.24
mesLagPortmaskIf1
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.25
mesLagPortmaskIf2
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.26
mesLagPortmaskIf3
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.27
mesLagPortmaskIf4
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.28
mesLagPortmaskIf5
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.29
mesLagPortmaskIf6
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.30
mesLagPortmaskIf7
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.31
mesLagPortmaskIf8
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.32
mesLagMasterIfNo
The interface number of the multi-connector port or port group.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.33
mesLagMasterTxPort
The TX-port of the interface.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.34
mesLagLocalId
Id for index calculation.
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.35
mesLagPrepareConfigPortMask
Converts portmasks to input for dialog LagConfigure
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.36
mesLagPortmaskIf9
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.37
mesLagPortmaskIf10
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.38
mesLagPortmaskIf11
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.39
mesLagPortmaskIf12
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.40
mesLagPortmaskIf13
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.41
mesLagPortmaskIf14
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.42
mesLagPortmaskIf15
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.43
mesLagPortmaskIf16
The ports belonging to the link aggregation group.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.44
mesLagServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.15.1.1.45

mesPolicingTable

table
.1.3.6.1.4.1.8708.2.32.2.16.1 · 1 row entry · 10 columns
Open in standard view 
The policing list.
mesPolicingEntry entry .1.3.6.1.4.1.8708.2.32.2.16.1.1
An entry in the policing list.
Indexes
mesPolicingIndex
Column Syntax OID
mesPolicingIndex
An arbitrary index assigned to each policer entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.1
mesPolicingName
The management name of the policer, for example
'policer:1:4:0'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.2
mesPolicingRate
The policer limits traffic on ingress and causes
excess traffic to be dropped. The policer rate
scales linearly from zero to line rate with a
resolution of 153 kb/s.

The policer ignores BPDU and GARP fram…
Unsigned32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.3
mesPolicingBurstSize
The policer burst size defines the maximum burst
length that can be sent at wire speed before the
policer rate limit is applied.

The burst size can range from 64B to 16kB.
Unsigned32r/w
Constraints:
range: 0-16320
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.4
mesPolicingType
The policer can limit different traffic types
which is useful for achieving storm control.
Enumerationr/w
Enumerated Values:
1all
2broadcast
3broadcastMulticast
4broadcastUnknownunicast
5broadcastMulticastUnknownunicast
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.5
mesPolicingInternalReference obsolete
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.6
mesPolicingIdentifier
Unique identifier for the policer.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.7
mesPolicingUpId
Internal reference for the policer in the traffic unit.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.8
mesPolicingBurstSize2
The policer burst size defines the maximum burst
length that can be sent at wire speed before the
policer rate limit is applied.

The burst size can range from 4kB to 4096kB.

The configured …
Unsigned32r/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.9
mesPolicingId
Unique persistent identifier for policer and Internal reference for the policer in the traffic unit.
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.16.1.1.10

mesShapingTable

table
.1.3.6.1.4.1.8708.2.32.2.17.1 · 1 row entry · 10 columns
Open in standard view 
The shaping list.
mesShapingEntry entry .1.3.6.1.4.1.8708.2.32.2.17.1.1
An entry in the shaping list.
Indexes
mesShapingIndex
Column Syntax OID
mesShapingIndex
An arbitrary index assigned to each shaper entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.1
mesShapingName
The management name of the shaper, for example
'bwp-1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.2
mesShapingRate
The shaper works with the scheduler on egress and
causes excess traffic to be held back until traffic
falls below set limit, thus smoothing out
bursts. The shaper rate scales linearly from zero to
line rate with a resol…
Unsigned32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.3
mesShapingBurstSize
The shaper burst size defines the maximum burst
length that can be sent at wire speed before the
shaper rate limit is applied.

The burst size can range from 64B to 8kB.
Unsigned32r/w
Constraints:
range: 0-8128
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.4
mesShapingQueue
The queue number for this shaper.
Unsigned32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.5
mesShapingInternalReference obsolete
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.6
mesShapingExcess
The shaper excess parameter allows the queue to use
more bandwidth if all other shapers are
satisfied. If more than one shaper has the excess
flag set, then the queues arbitrate in strict
priority order.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.7
mesShapingIdentifier
Unique identifier for the shaper.
OctetStringr/w
Constraints:
range: 1-21
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.8
mesShapingMinRate
The shaper works with the scheduler on egress and
causes excess traffic to be held back until traffic
falls below set limit, thus smoothing out
bursts. The shaper rate scales linearly from zero to
line rate with a resol…
Unsigned32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.9
mesShapingLocalId
Id for index calculation.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.17.1.1.10

mesCosTable

table
.1.3.6.1.4.1.8708.2.32.2.18.1 · 1 row entry · 12 columns
Open in standard view 
The COS group list.
mesCosEntry entry .1.3.6.1.4.1.8708.2.32.2.18.1.1
An entry in the COS list.
Indexes
mesCosIndex
Column Syntax OID
mesCosIndex
An arbitrary index assigned to each COS entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.1
mesCosName
The management name of the COS group, for example 'cos:1:2:2'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.2
mesCosTxPort
The TX-port of the interface.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.3
mesCosMap
Cos map states if the CoS group is enabled or not.
Possible values enabled or disabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.4
mesCosPriority0
The queue that should have user priority 0.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.5
mesCosPriority1
The queue that should have priority 1.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.6
mesCosPriority2
The queue that should have priority 2.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.7
mesCosPriority3
The queue that should have priority 3.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.8
mesCosPriority4
The queue that should have priority 4.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.9
mesCosPriority5
The queue that should have priority 5.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.10
mesCosPriority6
The queue that should have priority 6.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.11
mesCosPriority7
The queue that should have priority 7.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.18.1.1.12

mesBwpMapTable

table
.1.3.6.1.4.1.8708.2.32.2.19.1 · 1 row entry · 5 columns
Open in standard view 
The BWP to port map list.
mesBwpMapEntry entry .1.3.6.1.4.1.8708.2.32.2.19.1.1
An entry in the BWP map list.
Indexes
mesBwpMapIndex
Column Syntax OID
mesBwpMapIndex
An arbitrary index assigned to each BWP entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.19.1.1.1
mesBwpMapName
The management name of the map, for example
'map:1:3:1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.19.1.1.2
mesBwpMapPortName
The name of the port belonging to the BWP
'map:1:3:1'.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.19.1.1.3
mesBwpMapBwpName
The name of the policer or shaper, for example
'shaper:1:3:1'.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.19.1.1.4
mesBwpMapInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.19.1.1.5

mesMirroringTable

table
.1.3.6.1.4.1.8708.2.32.2.20.1 · 1 row entry · 9 columns
Open in standard view 
The mirroring group list.
          
Port mirroring is a method of monitoring traffic
that forwards a copy of each packet from one port
(source) to another port (destination) where the
packet can be studied. Port mirroring is used as a
diagnostic tool or debugging feature.
mesMirroringEntry entry .1.3.6.1.4.1.8708.2.32.2.20.1.1
An entry in the mirroring list.
Indexes
mesMirroringIndex
Column Syntax OID
mesMirroringIndex
An arbitrary index assigned to each interface entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.20.1.1.1
mesMirroringName
The management name of the mirroring source, for
example 'mirror:1:2:1-2'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.20.1.1.2
mesMirroringDestination
The analyzer port, to which traffic is
mirrored. Only one analyzer port per board is
allowed for EMXP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.20.1.1.3
mesMirroringDirection
The direction of the mirrored traffic.
Enumerationr/w
Enumerated Values:
1ingress
2egress
3both
 .1.3.6.1.4.1.8708.2.32.2.20.1.1.4
mesMirroringConfigureDestination
Defines the mirroring destination (analyzer) for the
selected port. Only one destination port per board is
allowed. If 'Not selected' is chosen, the destination
port will be removed.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.20.1.1.5
mesMirroringDestInterface
The analyzer interface, to which traffic is
mirrored. Only one analyzer port per board is
allowed for EMXP.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.20.1.1.6
mesMirroringDestTxPort
The analyzer tx port, to which traffic is
mirrored. Only one analyzer port per board is
allowed for EMXP.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.20.1.1.7
mesMirroringIfNo
The interface number of the mirror entry.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.20.1.1.8
mesMirroringTxPort
The number of the port where the TX-side of the
interface is located.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.20.1.1.9

mesVlanTagRuleTable

table
.1.3.6.1.4.1.8708.2.32.2.21.1 · 1 row entry · 15 columns
Open in standard view 
The VLAN tag rule group list.
          
VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. The rule defines
the type of VLAN rewrite operation (pop, push or
swap), the new VLAN ID and priority as well as the
direction (ingress or egress traffic) where the rule
is applied. The classification defines the traffic
matching criteria for which the rule are applied.
          
Currently, only VLAN classification is possible.
mesVlanTagRuleEntry entry .1.3.6.1.4.1.8708.2.32.2.21.1.1
An entry in the VLAN tag rule list.
Indexes
mesVlanTagRuleIndex
Column Syntax OID
mesVlanTagRuleIndex
An arbitrary index assigned to each rule entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.1
mesVlanTagRuleName
The management name of the rule, for example
'rule:1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.2
mesVlanTagRuleInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.3
mesVlanTagRuleClassificationName
The name of the classification associated with this
rule.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.4
mesVlanTagRuleType
Indicates if the type of the rule.

ingress - The rule applies to ingress traffic.
egress - The rule applies to egress traffic.
queue - Indicates mapping to a specific COS queue.
Not applicabl…
Enumerationr/w
Enumerated Values:
1ingress
2egress
3queue
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.5
mesVlanTagRuleOperation
The type of operation applied to this rule.

For ingress direction, only push and swap are
currently supported.

For egress direction, only pop and popSwap are
currently supported.
…
Enumerationr/w
Enumerated Values:
1none
2pop
3push
4swap
5pushPush
6swapPush
7swapSwap
8popPop
9popSwap
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.6
mesVlanTagRuleInnerVlanId
The new inner VLAN ID.

Only needed for the following operations:
- pushPush
- swapPush
- swapSwap
- popSwap
This attribute can be written via SNMP.
Values: 4095-4096 are only for internal use.
Unsigned32r/w
Constraints:
range: 1-4096
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.7
mesVlanTagRuleInnerPrio
The new inner VLAN priority.

Only needed for the following operations:
- pushPush
- swapPush
- swapSwap
- popSwap
This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.8
mesVlanTagRuleOuterVlanId
The new outer VLAN ID.

Only needed for the following operations:
- push
- swap
- pushPush
- swapPush
- swapSwap
This attribute can be written via SNMP.
Values: 4095-4096 are only for internal use.
Unsigned32r/w
Constraints:
range: 1-4096
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.9
mesVlanTagRuleOuterPrio
The new outer VLAN priority.

Only needed for the following operations:
- push
- swap
- pushPush
- swapPush
- swapSwap
This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.10
mesVlanTagRulePrioAssignment
Defines how the priority is assigned when pushing
VLAN ID on ingress.

set - Set to specified value.

copy - Use the priority from the ingress tag.

none - Priority assignment i…
Enumerationr/w
Enumerated Values:
1set
2copy
3none
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.11
mesVlanTagRuleConfigurePrioAssignment
Defines if the priority is copied from ingress tag
or set to a specific value.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.12
mesVlanTagRuleQueue
The VLAN queue number if 'type' is 'queue'.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.13
mesVlanTagRuleRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
This attribute can be writ…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.14
mesVlanTagRuleInterfaceName
Vlan Tag Rule interface name
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.21.1.1.15

mesVlanTagClassVlanTable

table
.1.3.6.1.4.1.8708.2.32.2.22.1 · 1 row entry · 12 columns
Open in standard view 
The VLAN tag classification VLAN group list.
          
VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. The rule defines
the type of operation (pop, push or swap) and new
VLAN ID/priority. The classification defines the
traffic matching criteria for which the rule are
applied.
          
Currently, only VLAN classification on outer VLAN ID
is possible.
mesVlanTagClassVlanEntry entry .1.3.6.1.4.1.8708.2.32.2.22.1.1
An entry in the VLAN tag classification VLAN list.
Indexes
mesVlanTagClassVlanIndex
Column Syntax OID
mesVlanTagClassVlanIndex
An arbitrary index assigned to each classification entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.1
mesVlanTagClassVlanName
The management name of the classification, for example 'classVlan:1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.2
mesVlanTagClassVlanTxPort
The TX-port of the interface.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.3
mesVlanTagClassVlanInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.4
mesVlanTagClassVlanRuleName
The name of the rule associated with this
classification.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.5
mesVlanTagClassVlanRuleIndex
The index of the rule associated with this
classification.
Unsigned32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.6
mesVlanTagClassVlanOuterVlanId
The outer VLAN ID of the classification. -1 means no
classification on outer VLAN ID.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.7
mesVlanTagClassVlanLagIndex
The Lag Index of the interface.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.8
mesVlanTagClassVlanResourceType
The type of resource the Vlan Tag Class is connected.
Enumerationr/w
Enumerated Values:
1port
2lag
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.9
mesVlanTagClassVlanIfNo
The interface number of the multi-connector port or port group.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.10
mesVlanTagClassVlanLocalId
Id for index calculation.
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.11
mesVlanTagClassVlanRowStatus
Manages creation and deletion of conceptual rows via snmp.
See also SNMPv2-TC.
This object is only valid for creation and deletion of Vlan Tga Class.

Note: The newly created object will not necessarily
re…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.22.1.1.12

mesCosProfileTable

table
.1.3.6.1.4.1.8708.2.32.2.23.1 · 1 row entry · 65 columns
Open in standard view 
The COS Profile group list.
mesCosProfileEntry entry .1.3.6.1.4.1.8708.2.32.2.23.1.1
An entry in the COS Profile list.
Indexes
mesCosProfileIndex
Column Syntax OID
mesCosProfileIndex
An arbitrary index assigned to each COS Profile entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.1
mesCosProfileName
The management name of the COS Profile group, for
example 'cos:1:2:2'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.2
mesCosProfilePortmask
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.3
mesCosProfileScheduler
The scheduler type for the queue.

strict - strict priority

rr - round robin

wrr - weighted round robin
Enumerationr/w
Enumerated Values:
1strict
2rr
3wrr
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.4
mesCosProfileWeight0
The weight for prio 0 when scheduler is WRR.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.5
mesCosProfileWeight1
The weight for prio 1 when scheduler is WRR.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.6
mesCosProfileWeight2
The weight for prio 2 when scheduler is WRR.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.7
mesCosProfileWeight3
The weight for prio 3 when scheduler is WRR.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.8
mesCosProfileWeight4
The weight for prio 4 when scheduler is WRR.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.9
mesCosProfileWeight5
The weight for prio 5 when scheduler is WRR.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.10
mesCosProfileWeight6
The weight for prio 6 when scheduler is WRR.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.11
mesCosProfileWeight7
The weight for prio 7 when scheduler is WRR.
Unsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.12
mesCosProfilePriority0
The queue that should have user priority 0.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.13
mesCosProfilePriority1
The queue that should have user priority 1.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.14
mesCosProfilePriority2
The queue that should have user priority 2.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.15
mesCosProfilePriority3
The queue that should have user priority 3.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.16
mesCosProfilePriority4
The queue that should have user priority 4.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.17
mesCosProfilePriority5
The queue that should have user priority 5.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.18
mesCosProfilePriority6
The queue that should have user priority 6.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.19
mesCosProfilePriority7
The queue that should have user priority 7.
Enumerationr/w
Enumerated Values:
1q1
2q2
3q3
4q4
5q5
6q6
7q7
8q8
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.20
mesCosProfileConfigureScheduler
Change the the scheduler type of this profile.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.21
mesCosProfileIngressPcpDecoding Enumerationr/w
Enumerated Values:
1disabled
2userDefined
3pcp8P0D
4pcp7P1D
5pcp6P2D
6pcp5P3D
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.22
mesCosProfileIngressDeiDecoding Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.23
mesCosProfileIngressColor0 Enumerationr/w
Enumerated Values:
1green
2yellow
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.24
mesCosProfileIngressColor1 Enumerationr/w
Enumerated Values:
1green
2yellow
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.25
mesCosProfileIngressColor2 Enumerationr/w
Enumerated Values:
1green
2yellow
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.26
mesCosProfileIngressColor3 Enumerationr/w
Enumerated Values:
1green
2yellow
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.27
mesCosProfileIngressColor4 Enumerationr/w
Enumerated Values:
1green
2yellow
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.28
mesCosProfileIngressColor5 Enumerationr/w
Enumerated Values:
1green
2yellow
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.29
mesCosProfileIngressColor6 Enumerationr/w
Enumerated Values:
1green
2yellow
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.30
mesCosProfileIngressColor7 Enumerationr/w
Enumerated Values:
1green
2yellow
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.31
mesCosProfileEgressPcpEncoding Enumerationr/w
Enumerated Values:
1disabled
2userDefined
3pcp8P0D
4pcp7P1D
5pcp6P2D
6pcp5P3D
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.32
mesCosProfileEgressDeiEncoding Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.33
mesCosProfileEgressPcpGreen0 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.34
mesCosProfileEgressPcpGreen1 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.35
mesCosProfileEgressPcpGreen2 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.36
mesCosProfileEgressPcpGreen3 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.37
mesCosProfileEgressPcpGreen4 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.38
mesCosProfileEgressPcpGreen5 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.39
mesCosProfileEgressPcpGreen6 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.40
mesCosProfileEgressPcpGreen7 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.41
mesCosProfileEgressPcpYellow0 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.42
mesCosProfileEgressPcpYellow1 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.43
mesCosProfileEgressPcpYellow2 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.44
mesCosProfileEgressPcpYellow3 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.45
mesCosProfileEgressPcpYellow4 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.46
mesCosProfileEgressPcpYellow5 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.47
mesCosProfileEgressPcpYellow6 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.48
mesCosProfileEgressPcpYellow7 Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.49
mesCosProfilePortmaskIf1
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.50
mesCosProfilePortmaskIf2
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.51
mesCosProfilePortmaskIf3
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.52
mesCosProfilePortmaskIf4
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.53
mesCosProfilePortmaskIf5
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.54
mesCosProfilePortmaskIf6
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.55
mesCosProfilePortmaskIf7
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.56
mesCosProfilePortmaskIf8
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.57
mesCosProfilePortmaskIf9
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.58
mesCosProfilePortmaskIf10
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.59
mesCosProfilePortmaskIf11
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.60
mesCosProfilePortmaskIf12
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.61
mesCosProfilePortmaskIf13
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.62
mesCosProfilePortmaskIf14
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.63
mesCosProfilePortmaskIf15
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.64
mesCosProfilePortmaskIf16
The ports that the profile applies to.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.23.1.1.65

mesMaidTable

table
.1.3.6.1.4.1.8708.2.32.2.24.1 · 1 row entry · 32 columns
Open in standard view 
The Maintenance Domain table. Each row in the table
represents a different Maintenance Domain.  A
Maintenance Domain is described in 802.1ag (3.22) as
the network or the part of the network for which
faults in connectivity are to be managed. The
boundary of a Maintenance Domain is defined by a set
of DSAPs, each of which can become a point of
connectivity to a service instance.
mesMaidEntry entry .1.3.6.1.4.1.8708.2.32.2.24.1.1
The Maintenance Domain table entry. This entry is
not lost upon reboot. It is backed up by stable
storage.
Indexes
mesMaidIndex
Column Syntax OID
mesMaidIndex
The index to the Maintenance Domain table.

Referential integrity is required, i.e., the index
needs to be persistent upon a reboot or restart of
a device. The index can never be reused for other
Maintenan…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.1
mesMaidName
The management name of the classification, for
example 'meg:1:6:0:identifier'
(meg:[subrack]:[slot]:[identifier]).
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.2
mesMaidGroupId
A unique index for the MEG. Automatically generated
by the system.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.3
mesMaidMdFormat
The type (and thereby format) of the Maintenance
Domain Name.

This attribute can be written via SNMP.
Dot1agCfmMaintDomainNameTyper/w
Textual Convention: Dot1agCfmMaintDomainNameType Enumeration
Type Values:
1none
2dnsLikeName
3macAddressAndUint
4charString
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.4
mesMaidMdName
The Maintenance Domain name. The type/format of this
object is determined by the value of the
dot1agCfmMdNameType object.

Each Maintenance Domain has unique name amongst all
those used or available to a s…
Dot1agCfmMaintDomainNamer/w
Textual Convention: Dot1agCfmMaintDomainName OctetString
Type Constraints:
range: 1..43
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.5
mesMaidMdMac
Represents the MAC address if MD format is
macAddrAndUint.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.6
mesMaidMd2Octet
Represents the unsigned integer if MD format is
macAddrAndUint.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.7
mesMaidMdString
Represents the string if MA format is charString .
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.8
mesMaidLevel
The Maintenance Domain Level.
For a specific level, only one MEP with a specific VLAN ID
and port is allowed.
This attribute can be written via SNMP.
Dot1agCfmMDLevelr/w
Textual Convention: Dot1agCfmMDLevel Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.9
mesMaidMaFormat
The type (and thereby format) of the Maintenance
Association Name.

This attribute can be written via SNMP.
Dot1agCfmMaintAssocNameTyper/w
Textual Convention: Dot1agCfmMaintAssocNameType Enumeration
Type Values:
1primaryVid
2charString
3unsignedInt16
4rfc2685VpnId
32icc
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.10
mesMaidMaName
The Short Maintenance Association name. The
type/format of this object is determined by the
value of the dot1agCfmMaNetNameType object. This
name must be unique within a maintenance domain.

This attribute…
Dot1agCfmMaintAssocNamer/w
Textual Convention: Dot1agCfmMaintAssocName OctetString
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.11
mesMaidMaVpnOui
Represents the VPN authority Organizationally
Unique identifier if MA format is rfc2865VpnId.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.12
mesMaidMaVpnIndex
Represents the VPN index if MA format is
rfc2865VpnId.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.13
mesMaidMa2Octet
Represents the unsigned integer if MA format is
unsignedInt16.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.14
mesMaidMaVlan
Represents the Primary VLAN ID if MA format is
primaryVid.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.15
mesMaidMaString
Represents the string if MA format is charString .
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.16
mesMaidCcmInterval
Interval between CCM transmissions to be used by all MEPs in the MA.

intervalInvalid No CCMs are sent (disabled).
interval300Hz CCMs are sent every 3 1/3 milliseconds (300Hz).
interval10ms CCMs are …
Dot1agCfmCcmIntervalr/w
Textual Convention: Dot1agCfmCcmInterval Enumeration
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.17
mesMaidInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.18
mesMaidIdentifier
A unique user definied identifier for the MEG.
This attribute can be written via SNMP.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.19
mesMaidNoOfMeps
The current number of down-MEPs associated with this MEG.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.20
mesMaidAssociateMep
Create and associate a MEP for the MEG.
For a specific MEG level, only one MEP with a specific VLAN ID
and interface is allowed.

Interface - The name of the port/lag this MEP belongs to.

Pr…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.21
mesMaidReleaseMeps
Deletes all MEPs associated with this MEG.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.22
mesMaidRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
This attribute can be writ…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.23
mesMaidNoOfUpMeps
The current number of up-MEPs associated with this MEG.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.24
mesMaidLocalDeviceType
The type of device the MEG is created and associated.
Enumerationr/w
Enumerated Values:
1emxp
2nidGe
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.25
mesMaidViewFilter
The type of device the Maid is created,
this attribute is used to filter object in views.
Enumerationr/w
Enumerated Values:
1emxp
2nidGe
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.26
mesMaidNoOfNidMeps
The current number of nid MEPs associated with this MEG.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.27
mesMaidAssociateMepNid
Create and associate a MEP for the MEG.
MEG - Identifies to which Meg the Mep will be added.

Mep type - Local or Remote.

MEP identifier - Identifier for the Mep (range 1-8191)
…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.28
mesMaidAssociateMepAdvanced
Create and associate a MEP for the MEG.
For a specific MEG level, only one MEP with a specific VLAN ID
and interface is allowed.

Interface - The name of the port/lag this MEP belongs to.

Pr…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.29
mesMaidSubrack
The number of the subrack where the Maid is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.30
mesMaidSlot
The number of the slot where the Maid is located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.31
mesMaidServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.24.1.1.32

mesCfmMepTable

table
.1.3.6.1.4.1.8708.2.32.2.25.1 · 1 row entry · 50 columns
Open in standard view 
The Maintenance Association End Point (MEP) table.
          
Each row in the table represents a different MEP. A
MEP is an actively managed CFM entity, associated
with a specific DSAP of a Service Instance, which can
generate and receive CFM PDUs and track any
responses. It is an end point of a single Maintenance
Association, and is an endpoint of a separate
Maintenance Entity for each of the other MEPs in the
same Maintenance Association (802.lag clause 3.18).
mesCfmMepEntry entry .1.3.6.1.4.1.8708.2.32.2.25.1.1
The CFM MEP table entry.
Indexes
mesCfmMepIndex
Column Syntax OID
mesCfmMepIndex
The index to the MEP table.

This object is the interface index of the interface
either a bridge port, or an aggregated IEEE 802.1
link within a bridge port, to which the MEP is
attached.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.1
mesCfmMepName
The management name of the mep, for example
'megNo1:1:6:67' (megName:subrack:slot:identifier).
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.2
mesCfmMepMaid
The identifier of the MEG this MEP belongs to.

Persistent cross-reference to MEG table.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.3
mesCfmMepTxPort
The Tx-port of the MEP.
This attribute can be written via SNMP.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.4
mesCfmMepPortName
The name of the port this MEP belongs to.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.5
mesCfmMepAdminStatus
The administrative state for the object.

down - The object is de-activated.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration.…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.6
mesCfmMepOperStatus
The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.7
mesCfmMepPrimaryVid
An integer indicating the Primary VID of the MEP,
always one of the VIDs assigned to the MA of the
MEP. The value 0 indicates that either the Primary
VID is that of the MEP's MA, or that the MEP's MA is
associated with …
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.8
mesCfmMepVlanPriority
Priority. 3 bit value to be used in the VLAN tag,
if present in the transmitted frame.

The default value is the CCM priority.
This attribute can be written via SNMP.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.9
mesCfmMepType
The type of the MEP. Local (Tx) or Remote (Rx).
Only one local MEP is allowed in each MEG.
This attribute can be written via SNMP.
Enumerationr/w
Enumerated Values:
1local
2remote
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.10
mesCfmMepIdentifier
Integer that is unique among all the MEPs in the
same MA.

Other definition is: a small integer,
unique over a given Maintenance Association,
identifying a specific Maintenance association End
Point (3.19)…
Dot1agCfmMepIdr/w
Textual Convention: Dot1agCfmMepId Unsigned32
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.11
mesCfmMepInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.12
mesCfmMepRDICCM
A remote MEP is reported the RDI bit in its last
CCM.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.13
mesCfmMepMACstatus
Either some remote MEP is reporting its Interface
Status TLV as not isUp, or all remote MEPs are
reporting a Port Status TLV that contains some
value other than psUp.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.14
mesCfmMepRemoteCCM
The MEP is not receiving valid CCMs from at least
one of the remote MEPs.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.15
mesCfmMepErrorCCM
The MEP has received at least one invalid CCM whose
CCM Interval has not yet timed out.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.16
mesCfmMepXconCCM
The MEP has received at least one CCM from either
another MAID or a lower MD Level whose CCM Interval
has not yet timed out.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.17
mesCfmMepAis
Alarm indication signal.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.18
mesCfmMepChangePort deprecated
Procedure to change port.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.19
mesCfmMepTransmitLbrStatus
Indicates if loopback response is sent. Only valid for local and down MEPs
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.20
mesCfmMepRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
This attribute can be writ…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.21
mesCfmMepDirection
The direction in which the MEP faces on the Bridge port.
down(1) Sends Continuity Check Messages away from the
MAC Relay Entity.
up(2) Sends Continuity Check Messages towards the
MAC Relay …
Dot1agCfmMpDirectionr/w
Textual Convention: Dot1agCfmMpDirection Enumeration
Type Values:
1down
2up
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.22
mesCfmMepCcmSeqNumStatus
Value to enable or disable generation of CCM sequence number increments for a MEP.

disabled(1) - the MEP transmits a sequence number set to zero
enabled(2) - the MEP transmits a sequence number increment…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.23
mesCfmMepRemoteCsfLos
A Remote CSF LOS indication (Loss Of Signal) has been recived from the remote MEP.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.24
mesCfmMepRemoteCsfRdi
An Remote CSF RDI indication (Remote Defect Indication) has been recived from the remote MEP.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.25
mesCfmMepRemoteCsfFdi
A Remote CSF FDI indication (Forward Defect Indication) has been recived from the remote MEP.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.26
mesCfmMepLocalCsfLos
A Local CSF LOS indication (Loss Of Signal Defect Indication) has been recived on the local MEP.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.27
mesCfmMepLocalDeviceType
The type of device the MEP is created and associated.
Enumerationr/w
Enumerated Values:
1emxp
2nidGe
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.28
mesCfmMepLocalDeviceName
The name of device the MEP is created and associated.
Only valid when the local device type is nidGe.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.29
mesCfmMepLocalDeviceId
An arbitrary index(aka sdId) assigned to the local device
entry, where the MEP is associated to.
Only valid when the local device type is nidGe.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.30
mesCfmMepViewFilter
The type of device the MEP is created,
this attribute is used to filter object in views.
Enumerationr/w
Enumerated Values:
1emxp
2nidGe
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.31
mesCfmMepUnexpectedPeriod
Unexpected Period, alarm signal received from nid
which together with Unexpected MEP ID trigger the
ErrorCCM alarm.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.32
mesCfmMepUnexpectedMepId
Unexpected MEP-ID, alarm signal received from nid
which together with Unexpected Period trigger the
ErrorCCM alarm
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.33
mesCfmMepUnexpectedMegLevel
Unexpected Meg Level, alarm signal received from nid
which together with Mismerge trigger the
XconCCM alarm
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.34
mesCfmMepMismerge
Mismerge, alarm signal received from nid
which together with Unexpected Meg Level trigger the
XconCCM alarm
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.35
mesCfmMepNoOfLMs
The current number of LM Sessions with this MEP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.36
mesCfmMepNoOfDMs
The current number of DM Sessions with this MEP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.37
mesCfmMepAssociateLM
Procedure to add Y.1731/MEF-35 Loss Measurement to a remote MEP.
LMM interval - Interval of LMM messages, 1s, 10s, 100ms.
Type - MEP or MAC Address, (MEP for Automatic MAC Discovery or a MAC address)
High Lo…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.38
mesCfmMepAssociateDM
Procedure to add Y.1731/MEF-35 Delay Measurement to a remote MEP.
DMM interval - Interval of DMM messages, 100ms, 1s, 10s.
Type - MEP or MAC Address, (MEP for Automatic MAC Discovery or a MAC address)
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.39
mesCfmMepTransmitDmrStatus
Indicates if Delay Measurement (DM) responder is active. Only valid for down MEPs
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.40
mesCfmMepTransmitLmrStatus
Indicates if Loss Measurement (LM) responder is active. Only valid for down MEPs
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.41
mesCfmMepLmCosAwareness
Define CoS awareness for the LM responder.
A CoS aware LM Responder will return counters associated with the priority of the incoming LMM packets.

priorityBlind - LM Responder is Cos unaware (return count…
Enumerationr/w
Enumerated Values:
1priorityBlind
2priorityAware
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.42
mesCfmMepResourceType
The type of resource the MEP is connected.
Enumerationr/w
Enumerated Values:
1port
2lag
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.43
mesCfmMepLagId
Id of the lag connected to mep.
OctetStringr/w
Constraints:
range: 1-17
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.44
mesCfmMepInterfaceName
Name of the Interface connected to mep.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.45
mesCfmMepIfNo
The interface number of the multi-connector port or port group.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.46
mesCfmMepLocalId
Id for index calculation.
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.47
mesCfmMepSubrack
The number of the subrack where the Mep is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.48
mesCfmMepSlot
The number of the slot where the Mep is located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.49
mesCfmMepServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.25.1.1.50

mesErpTable

table
.1.3.6.1.4.1.8708.2.32.2.26.1 · 1 row entry · 49 columns
Open in standard view 
An ethernet ring is made of two or more nodes (EMXPii boards) which
are connected via links. Each node has two ring links connected to
other nodes. To avoid loops, one link in the ring must always be
blocked. The link that is blocked under normal conditions is called
Ring Protection Link (or RPL). One of the nodes connected to this
link is called the RPL owner and is responsible to control the status
of the RPL.
mesErpEntry entry .1.3.6.1.4.1.8708.2.32.2.26.1.1
An entry in the ERP list.
Indexes
mesErpIndex
Column Syntax OID
mesErpIndex
An arbitrary index. Subrack, slot and VLAN ID can
be derived from the index.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.1
mesErpName
The management name of the ERP.
For ERP V1:
'erp:1:5:4094' (erp:[subrack]:[slot]:[vlanId])
For ERP V2:
'erp2:1:5:1:4094' (erpv2:[subrack]:[slot]:[ringId]:[vlanId]).
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.2
mesErpPortLeft
The interface (Tx-Rx) where the left ERP link is located.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.3
mesErpPortRight
The interface (Tx-Rx) where the right ERP link is located.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.4
mesErpAdminStatus
The administrative state for the object.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When service is concluded
adminStatus should be s…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.5
mesErpInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.6
mesErpDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.7
mesErpVlanId
All control messaging (R-APS channel) for the ring are transmitted
on a specific VLAN ID.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.8
mesErpMegLevel
The Maintenance Domain Level (or MEG Level). The MEG level must be the same
across all ERP instances in the same ERP ring.
Dot1agCfmMDLevelr/w
Textual Convention: Dot1agCfmMDLevel Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.9
mesErpProtLink
The direction towards the Ring Protection Link (RPL) and the role of the node.
For the owner the RPL is situated on the chosen port while for the neighbour the
specified port is connected to the RPL owner (neighbour onl…
Enumerationr/w
Enumerated Values:
1none
2left
3right
4leftNeighbour
5rightNeighbour
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.10
mesErpGuardTime
The guard time is used to protect from receiving
old R-APS messages during a recovery from a failed
link. When the guard timer is running, all received
R-APS messages are ignored. The period of the guard
timer should be…
Unsigned32r/w
Constraints:
range: 10-2000
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.11
mesErpHoldOffTime
A hold-off timer coordinates timing of protection
switches between multiple layers. The timer gives
another protection layer the possibility to solve
the issue before performing the protection
switch. When a signal fail…
Unsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.12
mesErpWtrTime
After the link has recovered from a failure, the RPL
owner waits a fixed period before
blocking the RPL and restoring it to idle state.
The wait to restore time is defined in minutes.
Unsigned32r/w
Constraints:
range: 1-12
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.13
mesErpOamDetectionLeft
Defines whether OAM signal failure detection is
enabled on the left ERP port.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.14
mesErpOamDetectionRight
Defines whether OAM signal failure detection is
enabled on the right ERP port.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.15
mesErpStatusLeft
Indicates if the left ERP port forwards or blocks
traffic.
Enumeration
Enumerated Values:
0undefined
1forwarding
2blocked
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.16
mesErpStatusRight
Indicates if the right ERP port forwards or blocks
traffic.
Enumeration
Enumerated Values:
0undefined
1forwarding
2blocked
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.17
mesErpProtState
Indicates the protection state of the ring.

Starting
- The ring is in start-up phase.
Idle
- No failure has been detected and the Ring
Protection Link (RPL) is carrying no
…
Enumeration
Enumerated Values:
0undefined
1starting
2idle
3protection
4manualSwitch
5forcedSwitch
6pending
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.18
mesErpActiveEvent
Information about latest input to the ERP state machine.
Enumeration
Enumerated Values:
0undefined
1none
2localSignalFail
3localClearSignalFail
4remoteSignalFail
5wtrExpire
6wtrRunning
7noRequestRb
8noRequest
9localClear
10localFs
11remoteFs
12remoteMs
13localMs
14wtbExpires
15wtbRunning
16remoteEvent
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.19
mesErpRapsReqState
Request in the latest sent or received R-APS message.
Enumeration
Enumerated Values:
0undefined
1signalFail
2noRequest
3reserved
4reqStateForcedSwitch
5reqStateEvent
6reqManualSwitch
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.20
mesErpServiceFailure
New signal failure detected while in protected
state. I.e. two or more faults in the ring.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.21
mesErpServiceDegraded
The ERP is in protection state.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.22
mesErpUnexpectedMegLevel
Invalid R-APS messages received.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.23
mesErpCommunicationFailure
An expected R-APS message has not been received in
the last 15 second period. dFOP-TO in G.8032.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.24
mesErpChangePort deprecated
Procedure to change left and right port and
protection link. This functionality
is only available for ERPv1.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.25
mesErpRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.26
mesErpNodeType
The type of the ERPV2 node.

Ring node - Standard ring node.

Sub Interconnection - Node that connects a sub ring to a major ring.
Enumerationr/w
Enumerated Values:
1ringNode
2subInterconnection
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.27
mesErpProtectionMode
The protection mode of the ERPv2 instance.
nonRevertive -- non-revertive mode
revertive -- revertive mode
Enumerationr/w
Enumerated Values:
1nonRevertive
2revertive
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.28
mesErpVersion
The protocol version of the ERP instance.
erpV1 -- ERPv1
erpV2 -- ERPv2
Enumerationr/w
Enumerated Values:
1erpV1
2erpV2
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.29
mesErpMajorName
The management name of the major ring that the
subring is connected to.
For example
'erp2:1:5:1:4094' (erp:[subrack]:[slot]:[ringId]:[vlanId]).
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.30
mesErpRingId
Ring ID for the ERPv2 instance. All ERP instances
must have the same ring ID throughout the ERP ring.
Unsigned32r/w
Constraints:
range: 1-239
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.31
mesErpRingIndex
Index of ring used by VLAN Protection Groups and
VLAN Map when referring to a ring.
Unsigned32r/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.32
mesErpOperatorCommand
The operator commands.
noRequest (1)
-- initial state and the return state after issuing an operator command.
forced left (2)
-- force a block on the left ring port where the command is issued.
forced right (3)
…
Enumerationr/w
Enumerated Values:
1noRequest
2forcedLeft
3forcedRight
4manualLeft
5manualRight
6clear
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.33
mesErpGroupId
Unique number identifying group VLAN protection group for the R-APS VLAN of this ring.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.34
mesErpSwitchInformation
User has set a manual or a forced ERP switch.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.35
mesErpTopologyChangePropagation
Disable or enable forwarding of topology change from sub-ring to major ring.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.36
mesErpSubRings
List of Ring Indexs of connected ERP v2 sub rings,
SNMPv2-SMICounter64r/w
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.37
mesErpResourceTypeLeft
The type of resource the left leg of erp is connected.
Enumerationr/w
Enumerated Values:
1port
2lag
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.38
mesErpLagIdLeft
Id of the left lag connected to erp.
OctetStringr/w
Constraints:
range: 1-17
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.39
mesErpResourceTypeRight
The type of resource the right leg of erp is connected.
Enumerationr/w
Enumerated Values:
1port
2lag
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.40
mesErpLagIdRight
Id of the right lag connected to erp.
OctetStringr/w
Constraints:
range: 1-17
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.41
mesErpInterfaceLeft
Displayname for the left interface connected to erp.
OctetStringr/w
Constraints:
range: 1-17
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.42
mesErpInterfaceRight
Displayname for the right interface connected to erp.
OctetStringr/w
Constraints:
range: 1-17
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.43
mesErpProvisioningMismatch
Detected if the RPL owner receives one or more
No request R-APS message(s) with the RPL blocked status flag
set (NR, RB) and a node ID that differs from its own. dFOP-PM in G.8032.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.44
mesErpIfNoLeft
The left interface number of the multi-connector port or port group.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.45
mesErpTxPortLeft
The TX-port of the left interface.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.46
mesErpIfNoRight
The right interface number of the multi-connector port or port group.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.47
mesErpTxPortRight
The TX-port of the right interface.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.48
mesErpOamDetectionVlanId
The VLAN ID in CCM:s used for OAM detection.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8708.2.32.2.26.1.1.49

mesClassTable

table
.1.3.6.1.4.1.8708.2.32.2.27.1 · 1 row entry · 33 columns
Open in standard view 
The classification list.
          
Classification enables dynamic assignment of actions (rules) when
traffic is received. The classification defines the traffic matching
criteria for which the action (rule) is applied.
mesClassEntry entry .1.3.6.1.4.1.8708.2.32.2.27.1.1
An entry in the classification list.
Indexes
mesClassIndex
Column Syntax OID
mesClassIndex
An arbitrary index assigned to each classification entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.1
mesClassName
The management name of the classification, for example 'class:1:6:myIdentifier'
(class:[subrack]:[slot]:[identifier]).
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.2
mesClassIdentifier
Unique identifier for the classification.
OctetStringr/w
Constraints:
range: 1-22
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.3
mesClassInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.4
mesClassPort
The port(s) to classificate on.

This attribute is a bitmask, where each bit represents a port. The
least significant bit represents port 1-2. The second least significant
bit represents port 3-4, and so o…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.5
mesClassLagId
The identifier of the LAG to classify on.

An empty string means no classification on LAG.
LUM-TCMgmtNameStringr/w
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.6
mesClassOuterVlanId
Outer VLAN ID to classify on.

-1: No classification on outer VLAN ID.

0: Classification on priority tagged traffic.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.7
mesClassOuterVlanPcp
Outer VLAN PCP to classify on.

If value is set to -1, then there is no classification
performed on outer VLAN PCP.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.8
mesClassPrecedence
When two policy classifications match, only the classification with the
highest precedence will be carried out. If two classifiers have the same
precedence, the classification created first will be carried out.
Unsigned32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.9
mesClassDaMacAddress
MAC destination address to classify on.

If every byte in the MAC destination address is set to 0, then
there is no classification made on MAC destination address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.10
mesClassAssociateAction
Create and associate an action (rule) with a classification.

Classification
Select the classification for which the action should be applied.

General policy action
Action
- None: Allo…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.11
mesClassRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.12
mesClassDaMacAddressMask
MAC destination address mask to classify on.

This is a classification attribute that is used in combination
with classification attribute MAC destination address. If every
byte in the MAC destination addr…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.13
mesClassInnerVlanId
Inner VLAN ID to classify on.

-1: No classification on inner VLAN ID.

0: Classification on priority tagged traffic.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.14
mesClassInnerVlanPcp
Inner VLAN PCP to classify on.

If value is set to -1, then there is no classification
performed on inner VLAN PCP.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.15
mesClassDSCP
DSCP Differentiated Services CodePoint to classify on.
If value is set to -1, then there is no classification performed on DSCP
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.16
mesClassInnerVlanCfi
Inner VLAN CFI/DEI, Canonical Format Indicator/Discard Eligibility Indication.
If value is set to -1, then there is no classification performed on CFI/DEI
Integer32r/w
Constraints:
range: -1-1
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.17
mesClassOuterVlanCfi
Outer VLAN CFI/DEI, Canonical Format Indicator/Discard Eligibility Indication.
If value is set to -1, then there is no classification performed on CFI/DEI
Integer32r/w
Constraints:
range: -1-1
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.18
mesClassDirection
Direction of the data the classification is made on.

ingress - Classfication is made on incoming traffic.

egress - Classification is made on processed and outgoing traffic.

I…
Enumerationr/w
Enumerated Values:
0undefined
1ingress
2egress
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.19
mesClassOuterTpid
Outer ethertype/TPID to classify on. Only valid if classification is made on outer VLAN ID,
outer PCP or outer CFI.
Enumerationr/w
Enumerated Values:
0undefined
1anyTag
2qTag0x8100
3sTag0x88a8
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.20
mesClassInternalClassId
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.21
mesClassSourceAddressIPV4
Source IP address.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.22
mesClassSourceMaskIPV4
Source network mask.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.23
mesClassDestAddressIPV4
Destination IP address.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.24
mesClassDestMaskIPV4
Destination network Mask.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.25
mesClassSubrack
The number of the subrack where the classification
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.26
mesClassSlot
The number of the slot where the classification
is located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.27
mesClassVlanStackStructure
Vlan Stack Structure to classify on.

untagged - Classification is made on traffic without vlan tag.
Enumerationr/w
Enumerated Values:
0none
1untagged
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.28
mesClassServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.29
mesClassEthertype
Ethertype to classify on.

ipv40x0800 - Internet Protocol version 4 (IPv4)
ipv60x86DD - Internet Protocol Version 6 (IPv6)
slow0x8809 - Slow Protocols (IEEE 802.3)
macsec0x88E5 - MAC security (IEEE 802.1AE…
Enumerationr/w
Enumerated Values:
0undefined
1ipv40x0800
2ipv60x86DD
3slow0x8809
4macsec0x88E5
5ptp0x88F7
6oamcfm0x8902
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.30
mesClassIfNo
The interface number of the multi-connector port or port group.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.31
mesClassTxPort
The tx port to classificate on.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.32
mesClassAssociateActionAdvanced
Create and associate an action (rule) with a classification.

Classification
Select the classification for which the action should be applied.

General policy action
Action
- None: Allo…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.27.1.1.39

mesActionTable

table
.1.3.6.1.4.1.8708.2.32.2.28.1 · 1 row entry · 18 columns
Open in standard view 
The VLAN action (rule) list.
          
VLAN rule classification enables dynamic assignment of rules (actions)
when traffic is received. When the incoming frame matches the criterias
 in the classification, the rule is applied to the frame.
mesActionEntry entry .1.3.6.1.4.1.8708.2.32.2.28.1.1
An entry in the VLAN action list.
Indexes
mesActionIndex
Column Syntax OID
mesActionIndex
An arbitrary index assigned to each action entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.1
mesActionName
The management name of the action, for example 'action:1:6:13'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.2
mesActionIdentifier
Unique identifier for the action.
This attribute can be written via SNMP.
OctetStringr/w
Constraints:
range: 1-21
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.3
mesActionInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.4
mesActionType
Type of action to be carried out.

Police: A MEF policer (bandwidth profile) is applied.

Green PCP: New PCP values for green frames.

Yellow PCP: …
Enumerationr/w
Enumerated Values:
1police
2greenPcp
3yellowPcp
4outerVlanIdPush
5outerVlanIdSwap
6innerVlanPop
7drop
8innerVlanIdPush
9innerVlanIdSwap
10greenQueue
11yellowQueue
12outerVlanPcpCopy
13redirect
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.5
mesActionOuterVlanId
New outer VLAN ID. Only used when action is 'Outer VLAN ID push' or
'Outer VLAN ID swap'.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.6
mesActionPcp
New PCP value. Only used when action is 'Green PCP' or 'Yellow PCP'.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.7
mesActionPolicerId
The MEF Policer identifier. Only used when action is 'Policer'.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.8
mesActionInnerVlanId
New inner VLAN ID. Only used when action is 'Inner VLAN ID push' or
'Inner VLAN ID swap'.
This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.9
mesActionQueue
The queue number. Only used when action is 'Green queue' or 'Yellow queue'.
This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.10
mesActionRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

Note: The newly created object will not necessarily
receive the same index as used in the create
procedure.
This attribute can be writ…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.11
mesActionRedirectPort
The port to redirect traffic.

This attribute is a bitmask, where each bit represents a port. The
least significant bit represents port 1-2. The second least significant
bit represents port 3-4, and so on.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.12
mesActionServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.13
mesActionRedirectIfNo
The interface number of the multi-connector to the redirect traffic port.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.14
mesActionRedirectTxPort
The port to redirect traffic.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.15
mesActionClassId
The classifier identifier.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.16
mesActionSubrack
The number of the subrack where the action is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.17
mesActionSlot
The number of the slot where the action is located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.28.1.1.18

mesPolicyTable

table
.1.3.6.1.4.1.8708.2.32.2.29.1 · 1 row entry · 6 columns
Open in standard view 
The policy list.
          
Policy enables dynamic assignment of rules (actions) when traffic is received. The
policy consist of two parts, classification and rule (action). The classification
defines the traffic matching criteria for which the rule are applied.
          
When a frame arrives on a port, the network element checks if the frame match the
classification criteria. If it does, then the action will by applied to the frame.
          
One action can be assigned to many classifications.
mesPolicyEntry entry .1.3.6.1.4.1.8708.2.32.2.29.1.1
An entry in the policy list.
Indexes
mesPolicyIndex
Column Syntax OID
mesPolicyIndex
An arbitrary index assigned to each policy entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.29.1.1.1
mesPolicyName
The management name of the policy, for example 'map:1:6:13'.
(map:[subrack]:[slot]:[generatedNumber]).
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.29.1.1.2
mesPolicyInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.29.1.1.4
mesPolicyClass
The identifier of the classification for which this policy applies.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.29.1.1.5
mesPolicyAction
The identifier of the action (rule) for which this policy applies.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.29.1.1.6
mesPolicyServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.29.1.1.7

mesErrorPropTable

table
.1.3.6.1.4.1.8708.2.32.2.30.1 · 1 row entry · 23 columns
Open in standard view 
The error propagator group rule list.
mesErrorPropEntry entry .1.3.6.1.4.1.8708.2.32.2.30.1.1
An entry in the error propagation rule list.
Indexes
mesErrorPropIndex
Column Syntax OID
mesErrorPropIndex
An arbitrary index assigned to each error propagation rule entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.1
mesErrorPropName
The management name of the error propagation rule. The name changes depending on rule type, for example 'ep:1:4:port:3-4:port:21-22'.
(ep:[subrack]:[slot]:[triggerObject]:[actionObject]:[index]).
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.2
mesErrorPropDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.3
mesErrorPropInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.4
mesErrorPropAdminStatus
The administrative state of the error propagation rule.

down - The rule is de-activated.
up - The rule is activated.
service - The rule is activated, but alarms are suppressed.
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.5
mesErrorPropOperStatus
The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or depending objects are in 'admin down'.
up - The object is active.
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.6
mesErrorPropState
Indicates whether the error propagation rule is invoked or not.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.7
mesErrorPropTriggerType
Defines the type of trigger that will activate the error propagation rule.
Enumerationr/w
Enumerated Values:
1mepStatus
2portStatus
3mepCsf
4lagStateChange
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.8
mesErrorPropTriggerObject
The name of the object that will trigger the error propagation rule.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.9
mesErrorPropTriggerPortIndex
The index of the port that will trigger the error propagation rule.
Only valid if the trigger type is set to 'portStatus'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.10
mesErrorPropTriggerMepIndex
The index of the MEP that will trigger the error propagation rule.
Only valid if the trigger type is set to 'mepStatus' or 'mepCsf'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.11
mesErrorPropActionType
Defines the type of action that will be performed when the
error propagation rule is triggered.
- laserShutdown : Shuts down the laser on the action port.
- sendCsf : Transmits a csf-los message on action MEP.
- flushMa…
Enumerationr/w
Enumerated Values:
1laserShutdown
3sendCsf
4flushMacTable
5flushMacTableAll
6flushMacTableERPv2
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.12
mesErrorPropActionObject
The name of the object on which the action will be performed when the rule is triggered.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.13
mesErrorPropActionPortIndex
The index of the port on which the action will be performed
when the rule is triggered. Only valid if the action type is set to 'laserShutDown'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.14
mesErrorPropActionMepIndex
The identifier of the MEP on which the action will be performed
when the rule is triggered. Only valid if the action type is set to 'sendCsf'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.15
mesErrorPropHoldOffTimer
Hold-off timer coordinates timing of error propagation
actions. When an event occurs, this event
should not be acted upon before the hold-off timer
has elapsed.
Unsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.16
mesErrorPropRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.17
mesErrorPropFault
Error propagation rule is active.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.18
mesErrorPropActionErpIndex
The identifier of the ERPv2 on which the action will be performed
when the rule is triggered. Only valid if the action type is set to LAG State Change.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.19
mesErrorPropTriggerLagIndex
The index of the LAG that will trigger the error propagation rule.
Only valid if the trigger type is set to 'lagStateChange'.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.20
mesErrorPropSubrack
The number of the subrack where the error propagation is located.
LUM-TCSubrackNumberr/w
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.21
mesErrorPropSlot
The number of the slot where the error propagation is located.
LUM-TCSlotNumberr/w
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.22
mesErrorPropServiceId
Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the service ID may affect
TNM service mappings.
LUM-TCServiceIdWithNotUsedr/w
Textual Convention: LUM-TCServiceIdWithNotUsed Integer32
Type Constraints:
range: -1..2147483647
 .1.3.6.1.4.1.8708.2.32.2.30.1.1.23

mesVlanProtTable

table
.1.3.6.1.4.1.8708.2.32.2.31.1 · 1 row entry · 11 columns
Open in standard view 
Table of protected VLAN groups.
mesVlanProtEntry entry .1.3.6.1.4.1.8708.2.32.2.31.1.1
An entry in the VLAN protection group list.
Indexes
mesVlanProtIndex
Column Syntax OID
mesVlanProtIndex
An arbitrary index. Subrack and slot can
be derived from the index.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.1
mesVlanProtName
The management name of the VLAN protection group entry, for example
'vlanProt:1:5:identifier' (vlanProt:[subrack]:[slot]:'identifier').
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.2
mesVlanProtInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.3
mesVlanProtRings
List of ERPv2 ring indexes of protecting rings,
SNMPv2-SMICounter64r/w
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.4
mesVlanProtProtectedVlan
Comma separated list of VLANs and VLAN ranges that should be
included in the ERPv2 protection.
ex: 100,150-200,301
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.5
mesVlanProtGroupId
Group identifier identifying this VLAN Protection group.
The number is unique and generated by system.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.6
mesVlanProtIdentifier
A unique identifier for the VLAN protection group on this traffic unit.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.7
mesVlanProtAddRingAction
In the WEB dialog add or remove ERPv2 ring protection
to/from a VLAN protection group:
- choose ring to add or remove.

In CLI add a ring protection to a VLAN protection group

For removing r…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.8
mesVlanProtRemoveRingAction
Removes a ring protection from a VLAN protection group.

For adding ring protection in CLI use:
'mes::vlanProt::vlanProt:X:Y:ID::addRing'
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.9
mesVlanProtDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.10
mesVlanProtChangeVlansAction
Change the VLANs protected by the VLAN protection group.

Comma separated list of VLANs and VLAN ranges
ex: 100,150-200,301

For changing protected vlans in CLI use:
'mes::vlanProt::vlanProt:…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.32.2.31.1.1.11

mesLacpTable

table
.1.3.6.1.4.1.8708.2.32.2.32.1 · 1 row entry · 33 columns
Open in standard view 
The LACP group list.
mesLacpEntry entry .1.3.6.1.4.1.8708.2.32.2.32.1.1
An entry in the LACP list.
Indexes
mesLacpIndex
Column Syntax OID
mesLacpIndex
An arbitrary index assigned to each LACP entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.1
mesLacpName
The management name of the LACP group, for example
'lacp:1:2:lag1:1-2' (lacp:[subrack]:[slot]:[LAG identifier]:[LACP port])
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.2
mesLacpInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.3
mesLacpLagIdentifier
Unique identifier for the LAG. Internal use.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.4
mesLacpLagId
LAG ID

The Link Aggregation Group Identifier (LAG ID) is constructed from the following parameters for each of the communicating Systems:

a) The System Identifier
b) The operational Key ass…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.5
mesLacpPortPriority
Port prio

The priority assigned to this port [0...65535]
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.6
mesLacpSelected
Selected

unselected - No aggregator is currently selected.

selected - The selection logic has selected an appropriate aggregator.

standby - Although the selection logic has …
Enumeration
Enumerated Values:
0unselected
1selected
2standby
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.7
mesLacpReceiveState
LACP Receive state

none - Not started

expired - If no LACPDU is received before the current while_timer expires, the state machine enters the expired state

defaulted - If no …
Enumeration
Enumerated Values:
0expired
1defaulted
2current
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.8
mesLacpTransmitState
LACP Transmit state

fastPeriodic - Periodic transmissions are enabled at a fast transmission rate

slowPeriodic - Periodic transmissions are enabled at a slow transmission rate
Enumeration
Enumerated Values:
0slowPeriodic
1fastPeriodic
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.9
mesLacpMuxState
LACP Mux state

detached - The link is not included in the LAG

attached - The link has been attached to the LAG

collectingDistributing - The link is included in the LAG and is…
Enumeration
Enumerated Values:
0detached
1attached
2collectingDistributing
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.10
mesLacpActorExpired
LACP actor expired

true - Indicates that the Actors Receive machine is in the EXPIRED state
false - Indicates that the Actors Receive machine is not in the EXPIRED state
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.11
mesLacpActorDefault
LACP actor defaulted

true - Indicates that the Actors Receive machine is in the DEFAULTED state
false - Indicates that the Actors Receive machine is not in the DEFAULTED state
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.12
mesLacpActorDistributing
LACP actor distributing

true - Distribution of outgoing frames is enabled

false - Distribution of outgoing frames is disabled
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.13
mesLacpActorCollecting
LACP actor collecting

true - Distribution of incoming frames is enabled
false - Distribution of incoming frames is disabled
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.14
mesLacpActorSynchronization
LACP Actor Synchronization

inSync - The link is considered synchronized. It has been allocated to the correct link aggregation group, the group has been associated with a compatible aggregator, and the id…
Enumeration
Enumerated Values:
0outOfSync
1inSync
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.15
mesLacpActorAggregation
LACP Actor Aggregation.

true - Indicates that the system considers this link to be Aggregateable; i.e., a potential candidate for aggregation

false - The link is considered to be Individual…
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.16
mesLacpActorTimeout
LACP actor timeout.

slowPeriodic - Indicates that the actor requests a slow transmission rate from its partner.
fastPeriodic - Indicates that the actor requests a fast transmission rate from its partner.
Enumeration
Enumerated Values:
0slowPeriodic
1fastPeriodic
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.17
mesLacpActorActivity
Actors port activity

active - The actor is configured for active LACP.

passive - The actor is configured for passive LACP.
Enumeration
Enumerated Values:
0passive
1active
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.18
mesLacpPartnerExpired
LACP partner expired

true - Indicates that the partners receive machine is in the EXPIRED state
false - Indicates that the partners receive machine is not in the EXPIRED state
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.19
mesLacpPartnerDefault
LACP actor defaulted

true - Indicates that the partners receive machine is in the DEFAULTED state
false - Indicates that the partners receive machine is not in the DEFAULTED state
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.20
mesLacpPartnerDistributing
LACP partner distributing

true - Distribution of outgoing frames is enabled

false - Distribution of outgoing frames is disabled
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.21
mesLacpPartnerCollecting
LACP partner collecting

true - Distribution of incoming frames is enabled

false - Distribution of incoming frames is disabled
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.22
mesLacpPartnerSynchronization
LACP partner Synchronization

inSync - The link is considered synchronized. It has been allocated to the correct link aggregation group, the group has been associated with a compatible aggregator, and the …
Enumeration
Enumerated Values:
0outOfSync
1inSync
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.23
mesLacpPartnerAggregation
LACP partner Aggregation.

true - Indicates that the system considers this link to be Aggregateable; i.e., a potential candidate for aggregation

false - The link is considered to be Individu…
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.24
mesLacpPartnerTimeout
LACP partner timeout

slowPeriodic - Indicates that the partner requests a slow transmission rate from its actor.
fastPeriodic - Indicates that the partner requests a fast transmission rate from its actor.
Enumeration
Enumerated Values:
0slowPeriodic
1fastPeriodic
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.25
mesLacpPartnerActivity
Partner port activity

active - The partner is configured for active LACP.

passive - The partner is configured for passive LACP.
Enumeration
Enumerated Values:
0passive
1active
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.26
mesLacpTxLacpPdus
Number of transmitted LACPDUs.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.27
mesLacpRxLacpPdus
Number of received LACPDUs.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.28
mesLacpInternalIndex
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.29
mesLacpResetCounters
Reset the Tx LACPDU and Rx LACPDU counters.
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.30
mesLacpIfNo
The interface number of the multi-connector port or port group.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.31
mesLacpTxPort
The TX-port of the interface.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.32
mesLacpUpPortId
Internal port reference for traffic unit.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.32.2.32.1.1.33