mesLagConfigure

LUM-MES-MIB · .1.3.6.1.4.1.8708.2.32.2.15.1.1.6
MIB view Table view

Object

column LUM-TCCommandString 
Change the members and hash algorithm in the Link
Aggregation Group.
              
Ports that are used in Ethernet Ring Protection
(ERP) are not available for LAG.
              
Changing the hash algorithm will affect all LAGs in
this board.

Context

MIB
LUM-MES-MIB
OID
.1.3.6.1.4.1.8708.2.32.2.15.1.1.6
Type
column
Access
readonly
Status
current
Parent
mesLagEntry
Table
mesLagTable
Siblings
44

Syntax

LUM-TCCommandString
Source
LUM-TCCommandString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mesLagIndex
An arbitrary index assigned to each LAG entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.1
mesLagLacpEnabled
Enables LACP for the LAG. Passive - Passive LACP indicates the ports preference for not transmitting LACPDUs unless its Partners control value is Active LACP (i.e.,…
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.15.1.1.10
mesLagLacpSystemPriority
System priority - The system priority of the system. A lower value indicates a higher priority [0...65535]
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.11
mesLagLacpPeriod
LACP period slow - LACP messages are received using a 30 second transmission interval with a timeout of 90 seconds. fast - LACP messages are received using a one se…
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.15.1.1.12
mesLagLacpLinkProtection deprecated
LACP link protection normal - The load is distributed on all links in the LAG. onePlusOne - All traffic is carried by the primary link while the other is used as a …
columnMesLacpLinkProtectionValue.1.3.6.1.4.1.8708.2.32.2.15.1.1.13
mesLagDegraded
LAG degraded Alarm - One or more of the links have link and/or LACP fault. Ok - All links and LACP (if used) are up.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.15.1.1.14
mesLagFailure
LAG failure Alarm - All of the links have link and/or LACP fault. Ok - At least one link and LACP (if used) is up.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.15.1.1.15
mesLagLacpMaxNumberOfActiveLinks
Define the maximum number of active links within a LAG. The range is normally from 1 to 8 (0 is though set if McLAG is disabled/removed from the LAG). If the maximum number of act…
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.16
mesLagNoOfPorts
The number of ports in LAG.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.17
mesLagLacpMinNumberOfActiveLinks
Define the minimum number of active links within a LAG. The range is normally from 1 to 8 (0 is though set if McLAG is disabled/removed from the LAG).
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.18
mesLagIsMcLag
If Lag is MC Lag.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.15.1.1.19
mesLagName
The management name of the LAG group, for example 'lag:1:2:1'.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.32.2.15.1.1.2
mesLagConfigureTagRule
VLAN rule classification enables dynamic assignment of VLAN when traffic is received. Currently, only VLAN classification is possible. Classification …
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.32.2.15.1.1.20
mesLagNoOfTagRules
The current number of VLAN tag rules associated with this lag.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.21
mesLagDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.32.2.15.1.1.22
mesLagAdminStatus
The administrative state for the object. service - The object is activated but alarms are suppressed. Intended for use during service or re-configuration. When serv…
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.32.2.15.1.1.23
mesLagOperStatus
The operational state for the object. notPresent - The object is not available. down - The object is de-activated or there are faults preventing its …
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.32.2.15.1.1.24
mesLagPortmaskIf1
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.25
mesLagPortmaskIf2
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.26
mesLagPortmaskIf3
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.27
mesLagPortmaskIf4
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.28
mesLagPortmaskIf5
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.29
mesLagInternalReference
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.3
mesLagPortmaskIf6
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.30
mesLagPortmaskIf7
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.31
mesLagPortmaskIf8
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.32
mesLagMasterIfNo
The interface number of the multi-connector port or port group.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.32.2.15.1.1.33
mesLagMasterTxPort
The TX-port of the interface.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.32.2.15.1.1.34
mesLagLocalId
Id for index calculation.
columnInteger32.1.3.6.1.4.1.8708.2.32.2.15.1.1.35
mesLagPrepareConfigPortMask
Converts portmasks to input for dialog LagConfigure
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.32.2.15.1.1.36
mesLagPortmaskIf9
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.37
mesLagPortmaskIf10
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.38
mesLagPortmaskIf11
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.39
mesLagPortmask
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.4
mesLagPortmaskIf12
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.40
mesLagPortmaskIf13
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.41
mesLagPortmaskIf14
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.42
mesLagPortmaskIf15
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.43
mesLagPortmaskIf16
The ports belonging to the link aggregation group. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.44
mesLagServiceId
Service ID is used by TNM for multi-layer service and network management. Default value is -1. All objects that created from ENM will have default service ID. Change of the servic…
columnLUM-TCServiceIdWithNotUsed.1.3.6.1.4.1.8708.2.32.2.15.1.1.45
mesLagMasterIndex
The port that is master in the LAG.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.15.1.1.5
mesLagHash
The hash algorithm used for LAG load balancing mac - Based on src/dst MAC adresses ip - Based on src/dst IP addresses and TCP/UDP ports …
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.15.1.1.7
mesLagIdentifier
Unique identifier for the LAG. This attribute can be written via SNMP.
columnOctetString.1.3.6.1.4.1.8708.2.32.2.15.1.1.8
mesLagRowStatus
Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the crea…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.8708.2.32.2.15.1.1.9