mesPortConfigureTagRule
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.12.1.1.51
Object
column
LUM-TCCommandString
VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. Currently, only
VLAN classification is possible.
Classification
The classification defines the traffic matching
criteria for which the rule are applied.
- Interface: The name of the port or the lag.
- Outer VLAN: The VLAN ID of the outer VLAN.
Rule
The rule defines the type of operation (pop, push
or swap), new VLAN ID/priority and the direction
of the traffic.
- Type: Ingress or egress.
- Operation: Different combinations of pop, push
and swap depending on the direction
(ingress or egress).
- New VLAN : The new VLAN ID for a push or swap
operation.
- Priority assignment: Defines if a new priority
is assigned or if the
priority is copy from the
ingress tag.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.12.1.1.51- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mesPortEntry
- Table
- mesPortTable
- Siblings
- 98
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesPortIndex An arbitrary index assigned to each Port entry.
The index is read-only and persistent, i.e the index
is kept over reboot and backed up by stable storage. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.1 |
| mesPortMtuSize Max Transmission Unit (MTU) Size in bytes for the
Port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.10 |
| mesPortTagType Defines what Ether Type the tag applied to the port
shall have.
qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
other - Select your own eth… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.11 |
| mesPortNoOfVlans The current number of VLANs associated with this
port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.12 |
| mesPortVlanAware Define VLAN awareness on the port. A VLAN aware
port will strip of the VLAN tag (if any) on ingress
and classify the frame to this VLAN ID. A VLAN
unaware port will classify the f… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.13 |
| mesPortVlanTagged Defines whether VLAN tagged frames are
accepted. The port must be VLAN aware to understand
tagged frames.
Access ports (UNI) admit all frames (untagged and
tagged),… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.14 |
| mesPortVlanUntagged Defines whether untagged frames are accepted. The
port must be VLAN aware to understand tagged frames.
no - Untagged frames are discarded.
yes - U… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.15 |
| mesPortIngressFiltering Controls if frames are VLAN filtered on
ingress. The port must be VLAN aware to understand
tagged frames.
no - No filtering of frames.
yes - Frames t… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.16 |
| mesPortEgressTag Controls if frames are transmitted VLAN tagged.
Access ports (UNI) do not egress tag whereas trunk
ports (NNI) tag on egress.
no - Transmit untagged,… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.17 |
| mesPortDefaultCeVlanId Native VLAN ID assigned to untagged frames. The
default VLAN is also the untagged VLAN for the
port.
0 means that no Push VLAN ID is used.
This attri… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.18 |
| mesPortAssociateVlan Associate VLAN ID (or range of VLAN IDs) to this port.
VLAN ID - VLAN ID that shall be mapped to the ports
Ports - Specifies the ports belo… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.19 |
| mesPortName The management name of the interface, for example
'port:1:2:1-2'. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.2 |
| mesPortReleaseVlan Remove all VLANs from the port. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.20 |
| mesPortActingAsLine Defines if port is acting as line or client.
disabled - port is acting as client.
enabled - port is acting as line. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.21 |
| mesPortTrustedPortmask Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.22 |
| mesPortConfigureTrustedPortmask Select the ports that shall be trusted by this port.
Enter trusted ports as a comma separated list of tx ports, ex:'1,3,9-13' or none, -, all or LAG name.
When spec… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.23 |
| mesPortMacAddress The mac address of the port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.24 |
| mesPortLagStatus The Link Aggregation Group (LAG) status
noLag - port does not belong to a LAG
master - port is master in a LAG
slave - port is slave i… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.25 |
| mesPortLagPortmask Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.26 |
| mesPortAssociateLag Creates a Link Aggregation Group (LAG). The
selected ports will be used as 'slaves' in the LAG.
Ports that are used in Ethernet Ring Protection
(ERP) are not availa… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.27 |
| mesPortTxEthUtilization Shows a snapshot of the current bandwidth
utilization of the transmitted ethernet signal
during the last second. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.28 |
| mesPortRxEthUtilization Shows a snapshot of the current bandwidth
utilization of the received ethernet signal during
the last second. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.29 |
| mesPortDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.3 |
| mesPortFlowControlMode The mode for handling flow control between
the local device and link partner.
The PAUSE settings has the following meaning
when auto-negotiation is enabled.
… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.30 |
| mesPortAutoNegotiationMode The wanted auto negotiation mode.
off - auto negotiation process is disabled
on - auto negotiation process is enabled | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.31 |
| mesPortAutoNegotiationStatus The result of the auto negotiation procedure
incomplete - the result is still pending
halfDuplex - half duplex
fullDuplex - full duple… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.32 |
| mesPortLinkDown A: Failure to negotiate a connection with the
other party.
D: A connection is negotiated. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.33 |
| mesPortLinkFaultRemote Remote link fault. IEEE 802.3ah
A: Active remote link fault indication.
D: Inactive remote link fault indication. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.34 |
| mesPortLinkFaultLocal Local link fault. IEEE 802.3ah
A: Active local link fault indication.
D: Inactive local link fault indication. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.35 |
| mesPortNoOfShapers The current number of shapers associated with this
port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.36 |
| mesPortNoOfPolicers The current number of policers associated with this
port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.37 |
| mesPortAssociateShaper Create and associate an egress shaper for the port.
Traffic shaping retains excess packets in a queue and then
schedules the excess for later transmission.
… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.38 |
| mesPortReleaseShaper Remove all shapers associated to the port. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.39 |
| mesPortSubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.4 |
| mesPortAssociatePolicer Create and associate an ingress policer for the port.
Traffic policing propagates bursts. When the traffic rate reaches the
configured maximum rate, excess traffic … | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.40 |
| mesPortReleasePolicer Remove all policers associated to the port. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.41 |
| mesPortRestartAutoNegotiation Issue a restart of the auto-negotiation process, regardless of
the current state. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.42 |
| mesPortConfigureLine Procedure to define if the port is acting as line or client. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.43 |
| mesPortEtherType Applicable if tag type is 'other'
Choose your own Ether Type. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.44 |
| mesPortConfigureEtherType Procedure to define how frames shall be tagged.
Sets tag type and ether type settings to be used for
the frames. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.45 |
| mesPortNoOfMirrorSources The current number of mirroring sources associated
with this port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.46 |
| mesPortMirroring The mirroring status of the port
disabled - port is not mirrored to an analyzer port
enabled - port is mirrored to an analyser port | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.47 |
| mesPortIngressPushTag Controls if the port pushes (adds) a VLAN tag on
ingress. Setting this attribute enables double
tagging as port becomes VLAN unaware. In this mode
the port will always push the N… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.48 |
| mesPortEgressPopTag Controls if the port pops (removes) the VLAN tag on
egress.
Access ports (UNI) pops tag on egress whereas trunk
ports (NNI) does not.
yes - Pop ta… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.49 |
| mesPortSlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.5 |
| mesPortDefaultCeVlanPriority Priority for the default CE-VLAN ID. Priority is
only valid for untagged traffic when 'priority
assignment' is 'copy'. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.50 |
| mesPortCosProfile The COS Queue profile to which this port belongs. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.52 |
| mesPortMode Defines the mode in which the port operates.
uni - User Network Interface. The port is an access
port. This setting treats all ingress frames
as untagg… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.53 |
| mesPortPrioAssignment Defines how the priority is assigned when pushing
VLAN ID on ingress.
set - Set to specified value.
copy - Use the priority from the ingress tag. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.54 |
| mesPortConfigurePrioAssignment Defines if the priority is copied from ingress tag
or set to a specific value. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.55 |
| mesPortNoOfTagRules The current number of VLAN tag rules associated
with this port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.56 |
| mesPortNoOfVlanSchedPrios deprecated The current number of VLAN schedule priorities
associated with this port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.57 |
| mesPortObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.32.2.12.1.1.58 |
| mesPortHighBitErrorRate High bit error rate (Hi-Ber). IEEE 802.3ah
A: Active high bit error rate.
D: Inactive high bit error rate. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.59 |
| mesPortTxPort The TX-port of the interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.6 |
| mesPortIdx Internal object reference | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.60 |
| mesPortIfNo The interface number of the multi-connector port or port group. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.61 |
| mesPortClientIdx Internal object reference client interface. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.62 |
| mesPortUpPortId Internal port reference for traffic unit. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.63 |
| mesPortLagPortmaskIf1 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.64 |
| mesPortLagPortmaskIf2 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.65 |
| mesPortLagPortmaskIf3 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.66 |
| mesPortLagPortmaskIf4 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.67 |
| mesPortLagPortmaskIf5 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.68 |
| mesPortLagPortmaskIf6 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.69 |
| mesPortRxPort The RX-port of the interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.7 |
| mesPortLagPortmaskIf7 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.70 |
| mesPortLagPortmaskIf8 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.71 |
| mesPortAutoNegMasterSlaveCfg 1000BASE-T PHYs shall provide support for Auto-Negotiation (802.3-2015 Clause 28) and shall be capable of
operating as master or slave. This relationship is necessary for establis… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.72 |
| mesPortAutoNegMasterSlaveStatus The result of the auto negotiation master-slave procedure
undefined - not possible to read attribute at the moment or
resolution of negotiation is still… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.73 |
| mesPortLagPortmaskIf9 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.74 |
| mesPortLagPortmaskIf10 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.75 |
| mesPortLagPortmaskIf11 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.76 |
| mesPortLagPortmaskIf12 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.77 |
| mesPortLagPortmaskIf13 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.78 |
| mesPortLagPortmaskIf14 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.79 |
| mesPortAdminStatus The administrative state for the object.
down - The object is de-activated.
service - The object is activated but alarms
are suppressed. Intended for… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.8 |
| mesPortLagPortmaskIf15 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.80 |
| mesPortLagPortmaskIf16 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.81 |
| mesPortCreateVlanTagClass Create and associate a class to a Vlan Rule Tag. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.82 |
| mesPortCreateTagRuleWoutClass VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. Currently, only
VLAN classification is possible.
Classification
… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.83 |
| mesPortTrustedPortmaskIf2 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.84 |
| mesPortTrustedPortmaskIf3 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.85 |
| mesPortTrustedPortmaskIf4 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.86 |
| mesPortTrustedPortmaskIf5 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.87 |
| mesPortTrustedPortmaskIf6 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.88 |
| mesPortTrustedPortmaskIf7 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.89 |
| mesPortOperStatus The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or there are
faults preventing its … | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.9 |
| mesPortTrustedPortmaskIf8 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.90 |
| mesPortTrustedPortmaskIf9 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.91 |
| mesPortTrustedPortmaskIf10 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.92 |
| mesPortTrustedPortmaskIf11 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.93 |
| mesPortTrustedPortmaskIf12 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.94 |
| mesPortTrustedPortmaskIf13 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.95 |
| mesPortTrustedPortmaskIf14 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.96 |
| mesPortTrustedPortmaskIf15 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.97 |
| mesPortTrustedPortmaskIf16 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.98 |
| mesPortServiceId Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the servic… | column | LUM-TCServiceIdWithNotUsed | .1.3.6.1.4.1.8708.2.32.2.12.1.1.99 |