mesLagLacpSystemPriority
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.15.1.1.11
Object
column
r/w
Unsigned32
System priority -
The system priority of the system. A lower value indicates a higher priority [0...65535]
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.15.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mesLagEntry
- Table
- mesLagTable
- Siblings
- 44
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesLagIndex An arbitrary index assigned to each LAG entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.1 |
| mesLagLacpEnabled Enables LACP for the LAG.
Passive - Passive LACP indicates the ports preference for not transmitting LACPDUs unless
its Partners control value is Active LACP (i.e.,… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.15.1.1.10 |
| mesLagLacpPeriod LACP period
slow - LACP messages are received using a 30 second transmission interval with a timeout of 90 seconds.
fast - LACP messages are received using a one se… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.15.1.1.12 |
| mesLagLacpLinkProtection deprecated LACP link protection
normal - The load is distributed on all links in the LAG.
onePlusOne - All traffic is carried by the primary link while the other is used as a … | column | MesLacpLinkProtectionValue | .1.3.6.1.4.1.8708.2.32.2.15.1.1.13 |
| mesLagDegraded LAG degraded
Alarm - One or more of the links have link and/or LACP fault.
Ok - All links and LACP (if used) are up. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.14 |
| mesLagFailure LAG failure
Alarm - All of the links have link and/or LACP fault.
Ok - At least one link and LACP (if used) is up. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.15 |
| mesLagLacpMaxNumberOfActiveLinks Define the maximum number of active links within a LAG.
The range is normally from 1 to 8 (0 is though set if McLAG is
disabled/removed from the LAG).
If the maximum number of act… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.16 |
| mesLagNoOfPorts The number of ports in LAG. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.17 |
| mesLagLacpMinNumberOfActiveLinks Define the minimum number of active links within a LAG.
The range is normally from 1 to 8 (0 is though set if McLAG is
disabled/removed from the LAG). | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.18 |
| mesLagIsMcLag If Lag is MC Lag. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.15.1.1.19 |
| mesLagName The management name of the LAG group, for example
'lag:1:2:1'. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.2 |
| mesLagConfigureTagRule VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. Currently, only
VLAN classification is possible.
Classification
… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.20 |
| mesLagNoOfTagRules The current number of VLAN tag rules associated
with this lag. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.21 |
| mesLagDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.22 |
| mesLagAdminStatus The administrative state for the object.
service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When serv… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.23 |
| mesLagOperStatus The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or there are
faults preventing its … | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.24 |
| mesLagPortmaskIf1 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.25 |
| mesLagPortmaskIf2 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.26 |
| mesLagPortmaskIf3 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.27 |
| mesLagPortmaskIf4 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.28 |
| mesLagPortmaskIf5 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.29 |
| mesLagInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.3 |
| mesLagPortmaskIf6 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.30 |
| mesLagPortmaskIf7 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.31 |
| mesLagPortmaskIf8 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.32 |
| mesLagMasterIfNo The interface number of the multi-connector port or port group. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.15.1.1.33 |
| mesLagMasterTxPort The TX-port of the interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.15.1.1.34 |
| mesLagLocalId Id for index calculation. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.35 |
| mesLagPrepareConfigPortMask Converts portmasks to input for dialog LagConfigure | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.36 |
| mesLagPortmaskIf9 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.37 |
| mesLagPortmaskIf10 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.38 |
| mesLagPortmaskIf11 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.39 |
| mesLagPortmask The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.4 |
| mesLagPortmaskIf12 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.40 |
| mesLagPortmaskIf13 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.41 |
| mesLagPortmaskIf14 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.42 |
| mesLagPortmaskIf15 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.43 |
| mesLagPortmaskIf16 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.44 |
| mesLagServiceId Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the servic… | column | LUM-TCServiceIdWithNotUsed | .1.3.6.1.4.1.8708.2.32.2.15.1.1.45 |
| mesLagMasterIndex The port that is master in the LAG. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.5 |
| mesLagConfigure Change the members and hash algorithm in the Link
Aggregation Group.
Ports that are used in Ethernet Ring Protection
(ERP) are not available for LAG.
… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.6 |
| mesLagHash The hash algorithm used for LAG load balancing
mac - Based on src/dst MAC adresses
ip - Based on src/dst IP addresses and TCP/UDP ports
… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.15.1.1.7 |
| mesLagIdentifier Unique identifier for the LAG.
This attribute can be written via SNMP. | column | OctetString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.8 |
| mesLagRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
Note: The newly created object will not necessarily
receive the same index as used in the crea… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.9 |