mesErrorPropOperStatus
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.30.1.1.6
Object
column
LUM-TCBoardOrInterfaceOperStatus
The operational state for the object. notPresent - The object is not available. down - The object is de-activated or depending objects are in 'admin down'. up - The object is active.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.30.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mesErrorPropEntry
- Table
- mesErrorPropTable
- Siblings
- 22
Values & Constraints
Type Values
1 | notPresent |
2 | down |
3 | up |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesErrorPropIndex An arbitrary index assigned to each error propagation rule entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.30.1.1.1 |
| mesErrorPropTriggerPortIndex The index of the port that will trigger the error propagation rule.
Only valid if the trigger type is set to 'portStatus'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.30.1.1.10 |
| mesErrorPropTriggerMepIndex The index of the MEP that will trigger the error propagation rule.
Only valid if the trigger type is set to 'mepStatus' or 'mepCsf'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.30.1.1.11 |
| mesErrorPropActionType Defines the type of action that will be performed when the
error propagation rule is triggered.
- laserShutdown : Shuts down the laser on the action port.
- sendCsf : Transmits a … | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.30.1.1.12 |
| mesErrorPropActionObject The name of the object on which the action will be performed when the rule is triggered. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.30.1.1.13 |
| mesErrorPropActionPortIndex The index of the port on which the action will be performed
when the rule is triggered. Only valid if the action type is set to 'laserShutDown'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.30.1.1.14 |
| mesErrorPropActionMepIndex The identifier of the MEP on which the action will be performed
when the rule is triggered. Only valid if the action type is set to 'sendCsf'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.30.1.1.15 |
| mesErrorPropHoldOffTimer Hold-off timer coordinates timing of error propagation
actions. When an event occurs, this event
should not be acted upon before the hold-off timer
has elapsed. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.30.1.1.16 |
| mesErrorPropRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.32.2.30.1.1.17 |
| mesErrorPropFault Error propagation rule is active. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.30.1.1.18 |
| mesErrorPropActionErpIndex The identifier of the ERPv2 on which the action will be performed
when the rule is triggered. Only valid if the action type is set to LAG State Change. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.30.1.1.19 |
| mesErrorPropName The management name of the error propagation rule. The name changes depending on rule type, for example 'ep:1:4:port:3-4:port:21-22'.
(ep:[subrack]:[slot]:[triggerObject]:[actionO… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.30.1.1.2 |
| mesErrorPropTriggerLagIndex The index of the LAG that will trigger the error propagation rule.
Only valid if the trigger type is set to 'lagStateChange'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.30.1.1.20 |
| mesErrorPropSubrack The number of the subrack where the error propagation is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.32.2.30.1.1.21 |
| mesErrorPropSlot The number of the slot where the error propagation is located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.32.2.30.1.1.22 |
| mesErrorPropServiceId Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the servic… | column | LUM-TCServiceIdWithNotUsed | .1.3.6.1.4.1.8708.2.32.2.30.1.1.23 |
| mesErrorPropDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.30.1.1.3 |
| mesErrorPropInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.30.1.1.4 |
| mesErrorPropAdminStatus The administrative state of the error propagation rule.
down - The rule is de-activated.
up - The rule is activated.
service - The rule is activated, but alarms are… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.32.2.30.1.1.5 |
| mesErrorPropState Indicates whether the error propagation rule is invoked or not. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.30.1.1.7 |
| mesErrorPropTriggerType Defines the type of trigger that will activate the error propagation rule. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.30.1.1.8 |
| mesErrorPropTriggerObject The name of the object that will trigger the error propagation rule. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.30.1.1.9 |