mesActionType
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.28.1.1.5
Object
column
r/w
Enumeration
Type of action to be carried out.
Police: A MEF policer (bandwidth profile) is applied.
Green PCP: New PCP values for green frames.
Yellow PCP: New PCP value for yellow frames.
Outer VLAN ID push: A VLAN tag is pushed in front of the existing outer VLAN.
Pushing outer and inner VLAN can only be done to untagged frames,
otherwise no action is carried out.
Outer VLAN ID swap: The outer VLAN ID is replaced.
Outer VLAN PCP copy: The outer VLAN PCP is copied from the incoming frame.
Drop: All traffic is dropped.
Inner VLAN pop: The inner VLAN tag is removed.
Inner VLAN ID push: A VLAN tag is pushed in front on the existing inner VLAN. Pushing an
inner VLAN requires the frame to be single tagged, otherwise no action
is carried out.
Inner VLAN ID swap: The inner VLAN ID is replaced. Swapping an inner VLAN requires the frame
to be single tagged, otherwise no action is carried out.
Green queue: Green frames are added to a specific queue.
Yellow queue: Yellow frames are added to a specific queue.
Redirect: Traffic is redirected to a specific port.
This attribute can be written via SNMP.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.28.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mesActionEntry
- Table
- mesActionTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | police |
2 | greenPcp |
3 | yellowPcp |
4 | outerVlanIdPush |
5 | outerVlanIdSwap |
6 | innerVlanPop |
7 | drop |
8 | innerVlanIdPush |
9 | innerVlanIdSwap |
10 | greenQueue |
11 | yellowQueue |
12 | outerVlanPcpCopy |
13 | redirect |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesActionIndex An arbitrary index assigned to each action entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.28.1.1.1 |
| mesActionQueue The queue number. Only used when action is 'Green queue' or 'Yellow queue'.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.28.1.1.10 |
| mesActionRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
Note: The newly created object will not necessarily
receive the same index as used in the crea… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.32.2.28.1.1.11 |
| mesActionRedirectPort The port to redirect traffic.
This attribute is a bitmask, where each bit represents a port. The
least significant bit represents port 1-2. The second least signifi… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.28.1.1.12 |
| mesActionServiceId Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the servic… | column | LUM-TCServiceIdWithNotUsed | .1.3.6.1.4.1.8708.2.32.2.28.1.1.13 |
| mesActionRedirectIfNo The interface number of the multi-connector to the redirect traffic port. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.28.1.1.14 |
| mesActionRedirectTxPort The port to redirect traffic. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.28.1.1.15 |
| mesActionClassId The classifier identifier. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.28.1.1.16 |
| mesActionSubrack The number of the subrack where the action is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.32.2.28.1.1.17 |
| mesActionSlot The number of the slot where the action is located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.32.2.28.1.1.18 |
| mesActionName The management name of the action, for example 'action:1:6:13'. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.28.1.1.2 |
| mesActionIdentifier Unique identifier for the action.
This attribute can be written via SNMP. | column | OctetString | .1.3.6.1.4.1.8708.2.32.2.28.1.1.3 |
| mesActionInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.28.1.1.4 |
| mesActionOuterVlanId New outer VLAN ID. Only used when action is 'Outer VLAN ID push' or
'Outer VLAN ID swap'.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.28.1.1.6 |
| mesActionPcp New PCP value. Only used when action is 'Green PCP' or 'Yellow PCP'.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.28.1.1.7 |
| mesActionPolicerId The MEF Policer identifier. Only used when action is 'Policer'.
This attribute can be written via SNMP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.28.1.1.8 |
| mesActionInnerVlanId New inner VLAN ID. Only used when action is 'Inner VLAN ID push' or
'Inner VLAN ID swap'.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.28.1.1.9 |