mesVlanTagRuleOperation

LUM-MES-MIB · .1.3.6.1.4.1.8708.2.32.2.21.1.1.6
MIB view Table view

Object

column r/w Enumeration 
The type of operation applied to this rule.
              
For ingress direction, only push and swap are
currently supported.
              
For egress direction, only pop and popSwap are
currently supported.
              
none     - No operation
              
pop      - Remove the outer VLAN tag.
              
push     - Push a new VLAN tag in front of the
           existing VLAN tag.
              
swap     - Replace a the existing outer VLAN tag.
              
pushPush - Two new VLAN tags are pushed in front of
           the existing VLAN tag.
              
swapPush - Outer VLAN tag is replaced. A new VLAN tag
           is pushed in front of the existing VLAN tag.
              
swapSwap - Both outer and inner VLAN tags are
           replaced.
              
popPop   - Both outer and inner VLAN tags are
           removed.
              
popSwap  - Remove outer VLAN tag. Replace inner VLAN
           tag.
              
This attribute can be written via SNMP.

Context

MIB
LUM-MES-MIB
OID
.1.3.6.1.4.1.8708.2.32.2.21.1.1.6
Type
column
Access
readwrite
Status
current
Parent
mesVlanTagRuleEntry
Table
mesVlanTagRuleTable
Siblings
14

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
2pop
3push
4swap
5pushPush
6swapPush
7swapSwap
8popPop
9popSwap

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mesVlanTagRuleIndex
An arbitrary index assigned to each rule entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.21.1.1.1
mesVlanTagRuleOuterPrio
The new outer VLAN priority. Only needed for the following operations: - push - swap - pushPush - swapPush - swapSwap This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.21.1.1.10
mesVlanTagRulePrioAssignment
Defines how the priority is assigned when pushing VLAN ID on ingress. set - Set to specified value. copy - Use the priority from the ingress tag. …
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.21.1.1.11
mesVlanTagRuleConfigurePrioAssignment
Defines if the priority is copied from ingress tag or set to a specific value.
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.32.2.21.1.1.12
mesVlanTagRuleQueue
The VLAN queue number if 'type' is 'queue'. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.21.1.1.13
mesVlanTagRuleRowStatus
Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the crea…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.8708.2.32.2.21.1.1.14
mesVlanTagRuleInterfaceName
Vlan Tag Rule interface name
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.32.2.21.1.1.15
mesVlanTagRuleName
The management name of the rule, for example 'rule:1'.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.32.2.21.1.1.2
mesVlanTagRuleInternalReference
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.21.1.1.3
mesVlanTagRuleClassificationName
The name of the classification associated with this rule.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.32.2.21.1.1.4
mesVlanTagRuleType
Indicates if the type of the rule. ingress - The rule applies to ingress traffic. egress - The rule applies to egress traffic. queue - Indicates mapping to a spe…
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.21.1.1.5
mesVlanTagRuleInnerVlanId
The new inner VLAN ID. Only needed for the following operations: - pushPush - swapPush - swapSwap - popSwap This attribute can be written via SNMP. Values: 4095-409…
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.21.1.1.7
mesVlanTagRuleInnerPrio
The new inner VLAN priority. Only needed for the following operations: - pushPush - swapPush - swapSwap - popSwap This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.21.1.1.8
mesVlanTagRuleOuterVlanId
The new outer VLAN ID. Only needed for the following operations: - push - swap - pushPush - swapPush - swapSwap This attribute can be written via SNMP. Values: 4095…
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.21.1.1.9