mesClassAssociateActionAdvanced
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.27.1.1.39
Object
column
LUM-TCCommandString
Create and associate an action (rule) with a classification.
Classification
Select the classification for which the action should be applied.
General policy action
Action
- None: Allows queue assignment or VLAN policy action.
- Drop: All traffic is dropped.
- Redirect: Traffic is redirected to a specific port.
Queue assignment
- Green frame: Assign green frames to a specific queue.
- Yellow frame: Assign yellow frames to a specific queue.
VLAN policy action
Outer VLAN ID action
- Push: Push a new VLAN tag in front of the existing outer VLAN tag.
- Swap: Replace the existing outer VLAN ID.
Outer VLAN PCP
- Set: Assign a new PCP value for green or yellow frames.
- Copy: Outer VLAN PCP is copied from the inner VLAN.
Inner VLAN ID action
- Pop: Inner VLAN tag is removed.
- Push: Push a new VLAN tag in front of the existing inner VLAN tag. Pushing an
inner VLAN requires the frame to be single tagged. If not single tagged,
then no action is carried out. However, pushing both inner and outer
VLAN ID is allowed on an untagged frame.
- Swap: Replace the existing inner VLAN ID and copy the outer VLAN PCP to the
inner VLAN tag.
MEF policer
Assign an existing MEF policer (bandwidth profile) to the classification.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.27.1.1.39- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mesClassEntry
- Table
- mesClassTable
- Siblings
- 32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesClassIndex An arbitrary index assigned to each classification entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.1 |
| mesClassDaMacAddress MAC destination address to classify on.
If every byte in the MAC destination address is set to 0, then
there is no classification made on MAC destination address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.8708.2.32.2.27.1.1.10 |
| mesClassAssociateAction Create and associate an action (rule) with a classification.
Classification
Select the classification for which the action should be applied.
Gener… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.27.1.1.11 |
| mesClassRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
Note: The newly created object will not necessarily
receive the same index as used in the crea… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.32.2.27.1.1.12 |
| mesClassDaMacAddressMask MAC destination address mask to classify on.
This is a classification attribute that is used in combination
with classification attribute MAC destination address. I… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.8708.2.32.2.27.1.1.13 |
| mesClassInnerVlanId Inner VLAN ID to classify on.
-1: No classification on inner VLAN ID.
0: Classification on priority tagged traffic. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.14 |
| mesClassInnerVlanPcp Inner VLAN PCP to classify on.
If value is set to -1, then there is no classification
performed on inner VLAN PCP. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.15 |
| mesClassDSCP DSCP Differentiated Services CodePoint to classify on.
If value is set to -1, then there is no classification performed on DSCP | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.16 |
| mesClassInnerVlanCfi Inner VLAN CFI/DEI, Canonical Format Indicator/Discard Eligibility Indication.
If value is set to -1, then there is no classification performed on CFI/DEI | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.17 |
| mesClassOuterVlanCfi Outer VLAN CFI/DEI, Canonical Format Indicator/Discard Eligibility Indication.
If value is set to -1, then there is no classification performed on CFI/DEI | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.18 |
| mesClassDirection Direction of the data the classification is made on.
ingress - Classfication is made on incoming traffic.
egress - Classification is made on processe… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.27.1.1.19 |
| mesClassName The management name of the classification, for example 'class:1:6:myIdentifier'
(class:[subrack]:[slot]:[identifier]). | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.27.1.1.2 |
| mesClassOuterTpid Outer ethertype/TPID to classify on. Only valid if classification is made on outer VLAN ID,
outer PCP or outer CFI. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.27.1.1.20 |
| mesClassInternalClassId For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.21 |
| mesClassSourceAddressIPV4 Source IP address. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.22 |
| mesClassSourceMaskIPV4 Source network mask. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.23 |
| mesClassDestAddressIPV4 Destination IP address. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.24 |
| mesClassDestMaskIPV4 Destination network Mask. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.25 |
| mesClassSubrack The number of the subrack where the classification
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.32.2.27.1.1.26 |
| mesClassSlot The number of the slot where the classification
is located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.32.2.27.1.1.27 |
| mesClassVlanStackStructure Vlan Stack Structure to classify on.
untagged - Classification is made on traffic without vlan tag. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.27.1.1.28 |
| mesClassServiceId Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the servic… | column | LUM-TCServiceIdWithNotUsed | .1.3.6.1.4.1.8708.2.32.2.27.1.1.29 |
| mesClassIdentifier Unique identifier for the classification. | column | OctetString | .1.3.6.1.4.1.8708.2.32.2.27.1.1.3 |
| mesClassEthertype Ethertype to classify on.
ipv40x0800 - Internet Protocol version 4 (IPv4)
ipv60x86DD - Internet Protocol Version 6 (IPv6)
slow0x8809 - Slow Protocols (IEEE 802.3)
m… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.27.1.1.30 |
| mesClassIfNo The interface number of the multi-connector port or port group. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.27.1.1.31 |
| mesClassTxPort The tx port to classificate on. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.27.1.1.32 |
| mesClassInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.4 |
| mesClassPort The port(s) to classificate on.
This attribute is a bitmask, where each bit represents a port. The
least significant bit represents port 1-2. The second least signi… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.5 |
| mesClassLagId The identifier of the LAG to classify on.
An empty string means no classification on LAG. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.27.1.1.6 |
| mesClassOuterVlanId Outer VLAN ID to classify on.
-1: No classification on outer VLAN ID.
0: Classification on priority tagged traffic. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.7 |
| mesClassOuterVlanPcp Outer VLAN PCP to classify on.
If value is set to -1, then there is no classification
performed on outer VLAN PCP. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.8 |
| mesClassPrecedence When two policy classifications match, only the classification with the
highest precedence will be carried out. If two classifiers have the same
precedence, the classification cre… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.27.1.1.9 |