mesPortMtuSize
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.12.1.1.10
Object
column
r/w
Unsigned32
Max Transmission Unit (MTU) Size in bytes for the Port.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.12.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mesPortEntry
- Table
- mesPortTable
- Siblings
- 98
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1518-10248
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesPortIndex An arbitrary index assigned to each Port entry.
The index is read-only and persistent, i.e the index
is kept over reboot and backed up by stable storage. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.1 |
| mesPortTagType Defines what Ether Type the tag applied to the port
shall have.
qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
other - Select your own eth… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.11 |
| mesPortNoOfVlans The current number of VLANs associated with this
port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.12 |
| mesPortVlanAware Define VLAN awareness on the port. A VLAN aware
port will strip of the VLAN tag (if any) on ingress
and classify the frame to this VLAN ID. A VLAN
unaware port will classify the f… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.13 |
| mesPortVlanTagged Defines whether VLAN tagged frames are
accepted. The port must be VLAN aware to understand
tagged frames.
Access ports (UNI) admit all frames (untagged and
tagged),… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.14 |
| mesPortVlanUntagged Defines whether untagged frames are accepted. The
port must be VLAN aware to understand tagged frames.
no - Untagged frames are discarded.
yes - U… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.15 |
| mesPortIngressFiltering Controls if frames are VLAN filtered on
ingress. The port must be VLAN aware to understand
tagged frames.
no - No filtering of frames.
yes - Frames t… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.16 |
| mesPortEgressTag Controls if frames are transmitted VLAN tagged.
Access ports (UNI) do not egress tag whereas trunk
ports (NNI) tag on egress.
no - Transmit untagged,… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.17 |
| mesPortDefaultCeVlanId Native VLAN ID assigned to untagged frames. The
default VLAN is also the untagged VLAN for the
port.
0 means that no Push VLAN ID is used.
This attri… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.18 |
| mesPortAssociateVlan Associate VLAN ID (or range of VLAN IDs) to this port.
VLAN ID - VLAN ID that shall be mapped to the ports
Ports - Specifies the ports belo… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.19 |
| mesPortName The management name of the interface, for example
'port:1:2:1-2'. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.2 |
| mesPortReleaseVlan Remove all VLANs from the port. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.20 |
| mesPortActingAsLine Defines if port is acting as line or client.
disabled - port is acting as client.
enabled - port is acting as line. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.21 |
| mesPortTrustedPortmask Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.22 |
| mesPortConfigureTrustedPortmask Select the ports that shall be trusted by this port.
Enter trusted ports as a comma separated list of tx ports, ex:'1,3,9-13' or none, -, all or LAG name.
When spec… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.23 |
| mesPortMacAddress The mac address of the port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.24 |
| mesPortLagStatus The Link Aggregation Group (LAG) status
noLag - port does not belong to a LAG
master - port is master in a LAG
slave - port is slave i… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.25 |
| mesPortLagPortmask Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.26 |
| mesPortAssociateLag Creates a Link Aggregation Group (LAG). The
selected ports will be used as 'slaves' in the LAG.
Ports that are used in Ethernet Ring Protection
(ERP) are not availa… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.27 |
| mesPortTxEthUtilization Shows a snapshot of the current bandwidth
utilization of the transmitted ethernet signal
during the last second. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.28 |
| mesPortRxEthUtilization Shows a snapshot of the current bandwidth
utilization of the received ethernet signal during
the last second. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.29 |
| mesPortDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.3 |
| mesPortFlowControlMode The mode for handling flow control between
the local device and link partner.
The PAUSE settings has the following meaning
when auto-negotiation is enabled.
… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.30 |
| mesPortAutoNegotiationMode The wanted auto negotiation mode.
off - auto negotiation process is disabled
on - auto negotiation process is enabled | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.31 |
| mesPortAutoNegotiationStatus The result of the auto negotiation procedure
incomplete - the result is still pending
halfDuplex - half duplex
fullDuplex - full duple… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.32 |
| mesPortLinkDown A: Failure to negotiate a connection with the
other party.
D: A connection is negotiated. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.33 |
| mesPortLinkFaultRemote Remote link fault. IEEE 802.3ah
A: Active remote link fault indication.
D: Inactive remote link fault indication. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.34 |
| mesPortLinkFaultLocal Local link fault. IEEE 802.3ah
A: Active local link fault indication.
D: Inactive local link fault indication. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.35 |
| mesPortNoOfShapers The current number of shapers associated with this
port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.36 |
| mesPortNoOfPolicers The current number of policers associated with this
port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.37 |
| mesPortAssociateShaper Create and associate an egress shaper for the port.
Traffic shaping retains excess packets in a queue and then
schedules the excess for later transmission.
… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.38 |
| mesPortReleaseShaper Remove all shapers associated to the port. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.39 |
| mesPortSubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.4 |
| mesPortAssociatePolicer Create and associate an ingress policer for the port.
Traffic policing propagates bursts. When the traffic rate reaches the
configured maximum rate, excess traffic … | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.40 |
| mesPortReleasePolicer Remove all policers associated to the port. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.41 |
| mesPortRestartAutoNegotiation Issue a restart of the auto-negotiation process, regardless of
the current state. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.42 |
| mesPortConfigureLine Procedure to define if the port is acting as line or client. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.43 |
| mesPortEtherType Applicable if tag type is 'other'
Choose your own Ether Type. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.44 |
| mesPortConfigureEtherType Procedure to define how frames shall be tagged.
Sets tag type and ether type settings to be used for
the frames. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.45 |
| mesPortNoOfMirrorSources The current number of mirroring sources associated
with this port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.46 |
| mesPortMirroring The mirroring status of the port
disabled - port is not mirrored to an analyzer port
enabled - port is mirrored to an analyser port | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.47 |
| mesPortIngressPushTag Controls if the port pushes (adds) a VLAN tag on
ingress. Setting this attribute enables double
tagging as port becomes VLAN unaware. In this mode
the port will always push the N… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.48 |
| mesPortEgressPopTag Controls if the port pops (removes) the VLAN tag on
egress.
Access ports (UNI) pops tag on egress whereas trunk
ports (NNI) does not.
yes - Pop ta… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.49 |
| mesPortSlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.5 |
| mesPortDefaultCeVlanPriority Priority for the default CE-VLAN ID. Priority is
only valid for untagged traffic when 'priority
assignment' is 'copy'. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.50 |
| mesPortConfigureTagRule VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. Currently, only
VLAN classification is possible.
Classification
… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.51 |
| mesPortCosProfile The COS Queue profile to which this port belongs. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.52 |
| mesPortMode Defines the mode in which the port operates.
uni - User Network Interface. The port is an access
port. This setting treats all ingress frames
as untagg… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.53 |
| mesPortPrioAssignment Defines how the priority is assigned when pushing
VLAN ID on ingress.
set - Set to specified value.
copy - Use the priority from the ingress tag. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.54 |
| mesPortConfigurePrioAssignment Defines if the priority is copied from ingress tag
or set to a specific value. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.55 |
| mesPortNoOfTagRules The current number of VLAN tag rules associated
with this port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.56 |
| mesPortNoOfVlanSchedPrios deprecated The current number of VLAN schedule priorities
associated with this port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.57 |
| mesPortObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.32.2.12.1.1.58 |
| mesPortHighBitErrorRate High bit error rate (Hi-Ber). IEEE 802.3ah
A: Active high bit error rate.
D: Inactive high bit error rate. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.59 |
| mesPortTxPort The TX-port of the interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.6 |
| mesPortIdx Internal object reference | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.60 |
| mesPortIfNo The interface number of the multi-connector port or port group. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.61 |
| mesPortClientIdx Internal object reference client interface. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.62 |
| mesPortUpPortId Internal port reference for traffic unit. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.63 |
| mesPortLagPortmaskIf1 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.64 |
| mesPortLagPortmaskIf2 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.65 |
| mesPortLagPortmaskIf3 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.66 |
| mesPortLagPortmaskIf4 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.67 |
| mesPortLagPortmaskIf5 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.68 |
| mesPortLagPortmaskIf6 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.69 |
| mesPortRxPort The RX-port of the interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.12.1.1.7 |
| mesPortLagPortmaskIf7 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.70 |
| mesPortLagPortmaskIf8 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.71 |
| mesPortAutoNegMasterSlaveCfg 1000BASE-T PHYs shall provide support for Auto-Negotiation (802.3-2015 Clause 28) and shall be capable of
operating as master or slave. This relationship is necessary for establis… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.72 |
| mesPortAutoNegMasterSlaveStatus The result of the auto negotiation master-slave procedure
undefined - not possible to read attribute at the moment or
resolution of negotiation is still… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.12.1.1.73 |
| mesPortLagPortmaskIf9 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.74 |
| mesPortLagPortmaskIf10 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.75 |
| mesPortLagPortmaskIf11 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.76 |
| mesPortLagPortmaskIf12 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.77 |
| mesPortLagPortmaskIf13 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.78 |
| mesPortLagPortmaskIf14 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.79 |
| mesPortAdminStatus The administrative state for the object.
down - The object is de-activated.
service - The object is activated but alarms
are suppressed. Intended for… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.8 |
| mesPortLagPortmaskIf15 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.80 |
| mesPortLagPortmaskIf16 Specifies the LAG ports if this ports is in a LAG. The least
significant bit represents client 1 (port 1-2), then client 2 (port 3-4),
then client 3 (port 5-6) etc. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.81 |
| mesPortCreateVlanTagClass Create and associate a class to a Vlan Rule Tag. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.82 |
| mesPortCreateTagRuleWoutClass VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. Currently, only
VLAN classification is possible.
Classification
… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.12.1.1.83 |
| mesPortTrustedPortmaskIf2 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.84 |
| mesPortTrustedPortmaskIf3 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.85 |
| mesPortTrustedPortmaskIf4 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.86 |
| mesPortTrustedPortmaskIf5 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.87 |
| mesPortTrustedPortmaskIf6 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.88 |
| mesPortTrustedPortmaskIf7 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.89 |
| mesPortOperStatus The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or there are
faults preventing its … | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.32.2.12.1.1.9 |
| mesPortTrustedPortmaskIf8 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.90 |
| mesPortTrustedPortmaskIf9 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.91 |
| mesPortTrustedPortmaskIf10 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.92 |
| mesPortTrustedPortmaskIf11 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.93 |
| mesPortTrustedPortmaskIf12 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.94 |
| mesPortTrustedPortmaskIf13 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.95 |
| mesPortTrustedPortmaskIf14 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.96 |
| mesPortTrustedPortmaskIf15 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.97 |
| mesPortTrustedPortmaskIf16 Trusted port defines what other port members are
trusted with this port. A frame received on this
ingress port can only egress to the members defined
in the trusted port. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.12.1.1.98 |
| mesPortServiceId Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the servic… | column | LUM-TCServiceIdWithNotUsed | .1.3.6.1.4.1.8708.2.32.2.12.1.1.99 |