mesCfmMepAdminStatus
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.25.1.1.6
Object
The administrative state for the object.
down - The object is de-activated.
service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When service is concluded
adminStatus should be set to 'up' again. Note that
there is no difference between 'up' and 'service',
if no alarms can be raised from this object.
up - The object will be activated when
available. Alarms are not suppressed.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.25.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mesCfmMepEntry
- Table
- mesCfmMepTable
- Siblings
- 49
Values & Constraints
Type Values
1 | down |
2 | service |
3 | up |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesCfmMepIndex The index to the MEP table.
This object is the interface index of the interface
either a bridge port, or an aggregated IEEE 802.1
link within a bridge port, to whic… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.1 |
| mesCfmMepType The type of the MEP. Local (Tx) or Remote (Rx).
Only one local MEP is allowed in each MEG.
This attribute can be written via SNMP. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.10 |
| mesCfmMepIdentifier Integer that is unique among all the MEPs in the
same MA.
Other definition is: a small integer,
unique over a given Maintenance Association,
identifying a specific … | column | Dot1agCfmMepId | .1.3.6.1.4.1.8708.2.32.2.25.1.1.11 |
| mesCfmMepInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.12 |
| mesCfmMepRDICCM A remote MEP is reported the RDI bit in its last
CCM. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.13 |
| mesCfmMepMACstatus Either some remote MEP is reporting its Interface
Status TLV as not isUp, or all remote MEPs are
reporting a Port Status TLV that contains some
value other than psUp. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.14 |
| mesCfmMepRemoteCCM The MEP is not receiving valid CCMs from at least
one of the remote MEPs. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.15 |
| mesCfmMepErrorCCM The MEP has received at least one invalid CCM whose
CCM Interval has not yet timed out. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.16 |
| mesCfmMepXconCCM The MEP has received at least one CCM from either
another MAID or a lower MD Level whose CCM Interval
has not yet timed out. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.17 |
| mesCfmMepAis Alarm indication signal. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.18 |
| mesCfmMepChangePort deprecated Procedure to change port. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.19 |
| mesCfmMepName The management name of the mep, for example
'megNo1:1:6:67' (megName:subrack:slot:identifier). | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.2 |
| mesCfmMepTransmitLbrStatus Indicates if loopback response is sent. Only valid for local and down MEPs | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.20 |
| mesCfmMepRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
Note: The newly created object will not necessarily
receive the same index as used in the crea… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.21 |
| mesCfmMepDirection The direction in which the MEP faces on the Bridge port.
down(1) Sends Continuity Check Messages away from the
MAC Relay Entity.
up(2) Sends Continuity Check Me… | column | Dot1agCfmMpDirection | .1.3.6.1.4.1.8708.2.32.2.25.1.1.22 |
| mesCfmMepCcmSeqNumStatus Value to enable or disable generation of CCM sequence number increments for a MEP.
disabled(1) - the MEP transmits a sequence number set to zero
enabled(2) - the M… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.23 |
| mesCfmMepRemoteCsfLos A Remote CSF LOS indication (Loss Of Signal) has been recived from the remote MEP. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.24 |
| mesCfmMepRemoteCsfRdi An Remote CSF RDI indication (Remote Defect Indication) has been recived from the remote MEP. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.25 |
| mesCfmMepRemoteCsfFdi A Remote CSF FDI indication (Forward Defect Indication) has been recived from the remote MEP. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.26 |
| mesCfmMepLocalCsfLos A Local CSF LOS indication (Loss Of Signal Defect Indication) has been recived on the local MEP. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.27 |
| mesCfmMepLocalDeviceType The type of device the MEP is created and associated. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.28 |
| mesCfmMepLocalDeviceName The name of device the MEP is created and associated.
Only valid when the local device type is nidGe. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.29 |
| mesCfmMepMaid The identifier of the MEG this MEP belongs to.
Persistent cross-reference to MEG table. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.3 |
| mesCfmMepLocalDeviceId An arbitrary index(aka sdId) assigned to the local device
entry, where the MEP is associated to.
Only valid when the local device type is nidGe. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.30 |
| mesCfmMepViewFilter The type of device the MEP is created,
this attribute is used to filter object in views. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.31 |
| mesCfmMepUnexpectedPeriod Unexpected Period, alarm signal received from nid
which together with Unexpected MEP ID trigger the
ErrorCCM alarm. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.32 |
| mesCfmMepUnexpectedMepId Unexpected MEP-ID, alarm signal received from nid
which together with Unexpected Period trigger the
ErrorCCM alarm | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.33 |
| mesCfmMepUnexpectedMegLevel Unexpected Meg Level, alarm signal received from nid
which together with Mismerge trigger the
XconCCM alarm | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.34 |
| mesCfmMepMismerge Mismerge, alarm signal received from nid
which together with Unexpected Meg Level trigger the
XconCCM alarm | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.35 |
| mesCfmMepNoOfLMs The current number of LM Sessions with this MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.36 |
| mesCfmMepNoOfDMs The current number of DM Sessions with this MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.37 |
| mesCfmMepAssociateLM Procedure to add Y.1731/MEF-35 Loss Measurement to a remote MEP.
LMM interval - Interval of LMM messages, 1s, 10s, 100ms.
Type - MEP or MAC Address, (MEP for Automatic… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.38 |
| mesCfmMepAssociateDM Procedure to add Y.1731/MEF-35 Delay Measurement to a remote MEP.
DMM interval - Interval of DMM messages, 100ms, 1s, 10s.
Type - MEP or MAC Address, (MEP for Automati… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.39 |
| mesCfmMepTxPort The Tx-port of the MEP.
This attribute can be written via SNMP. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.25.1.1.4 |
| mesCfmMepTransmitDmrStatus Indicates if Delay Measurement (DM) responder is active. Only valid for down MEPs | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.40 |
| mesCfmMepTransmitLmrStatus Indicates if Loss Measurement (LM) responder is active. Only valid for down MEPs | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.41 |
| mesCfmMepLmCosAwareness Define CoS awareness for the LM responder.
A CoS aware LM Responder will return counters associated with the priority of the incoming LMM packets.
priorityBlind - L… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.42 |
| mesCfmMepResourceType The type of resource the MEP is connected. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.43 |
| mesCfmMepLagId Id of the lag connected to mep. | column | OctetString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.44 |
| mesCfmMepInterfaceName Name of the Interface connected to mep. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.45 |
| mesCfmMepIfNo The interface number of the multi-connector port or port group. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.25.1.1.46 |
| mesCfmMepLocalId Id for index calculation. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.47 |
| mesCfmMepSubrack The number of the subrack where the Mep is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.32.2.25.1.1.48 |
| mesCfmMepSlot The number of the slot where the Mep is located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.32.2.25.1.1.49 |
| mesCfmMepPortName The name of the port this MEP belongs to. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.5 |
| mesCfmMepServiceId Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the servic… | column | LUM-TCServiceIdWithNotUsed | .1.3.6.1.4.1.8708.2.32.2.25.1.1.50 |
| mesCfmMepOperStatus The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or there are
faults preventing its … | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.7 |
| mesCfmMepPrimaryVid An integer indicating the Primary VID of the MEP,
always one of the VIDs assigned to the MA of the
MEP. The value 0 indicates that either the Primary
VID is that of the MEP's MA, … | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.8 |
| mesCfmMepVlanPriority Priority. 3 bit value to be used in the VLAN tag,
if present in the transmitted frame.
The default value is the CCM priority.
This attribute can be written via SNMP. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.9 |