mesErpChangePort

LUM-MES-MIB · .1.3.6.1.4.1.8708.2.32.2.26.1.1.25
MIB view Table view

Object

column deprecated LUM-TCCommandString 
Procedure to change left and right port and
protection link. This functionality
is only available for ERPv1.

Context

MIB
LUM-MES-MIB
OID
.1.3.6.1.4.1.8708.2.32.2.26.1.1.25
Type
column
Access
readonly
Status
deprecated
Parent
mesErpEntry
Table
mesErpTable
Siblings
48

Syntax

LUM-TCCommandString
Source
LUM-TCCommandString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mesErpIndex
An arbitrary index. Subrack, slot and VLAN ID can be derived from the index.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.1
mesErpProtLink
The direction towards the Ring Protection Link (RPL) and the role of the node. For the owner the RPL is situated on the chosen port while for the neighbour the specified port is c…
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.10
mesErpGuardTime
The guard time is used to protect from receiving old R-APS messages during a recovery from a failed link. When the guard timer is running, all received R-APS messages are ignored.…
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.11
mesErpHoldOffTime
A hold-off timer coordinates timing of protection switches between multiple layers. The timer gives another protection layer the possibility to solve the issue before performing t…
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.12
mesErpWtrTime
After the link has recovered from a failure, the RPL owner waits a fixed period before blocking the RPL and restoring it to idle state. The wait to restore time is defined in minu…
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.13
mesErpOamDetectionLeft
Defines whether OAM signal failure detection is enabled on the left ERP port.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.14
mesErpOamDetectionRight
Defines whether OAM signal failure detection is enabled on the right ERP port.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.15
mesErpStatusLeft
Indicates if the left ERP port forwards or blocks traffic.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.16
mesErpStatusRight
Indicates if the right ERP port forwards or blocks traffic.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.17
mesErpProtState
Indicates the protection state of the ring. Starting - The ring is in start-up phase. Idle - No failure has been detected and the Ring Pro…
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.18
mesErpActiveEvent
Information about latest input to the ERP state machine.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.19
mesErpName
The management name of the ERP. For ERP V1: 'erp:1:5:4094' (erp:[subrack]:[slot]:[vlanId]) For ERP V2: 'erp2:1:5:1:4094' (erpv2:[subrack]:[slot]:[ringId]:[vlanId]).
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.32.2.26.1.1.2
mesErpRapsReqState
Request in the latest sent or received R-APS message.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.20
mesErpServiceFailure
New signal failure detected while in protected state. I.e. two or more faults in the ring.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.26.1.1.21
mesErpServiceDegraded
The ERP is in protection state.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.26.1.1.22
mesErpUnexpectedMegLevel
Invalid R-APS messages received.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.26.1.1.23
mesErpCommunicationFailure
An expected R-APS message has not been received in the last 15 second period. dFOP-TO in G.8032.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.26.1.1.24
mesErpRowStatus
Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the crea…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.8708.2.32.2.26.1.1.26
mesErpNodeType
The type of the ERPV2 node. Ring node - Standard ring node. Sub Interconnection - Node that connects a sub ring to a major ring.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.27
mesErpProtectionMode
The protection mode of the ERPv2 instance. nonRevertive -- non-revertive mode revertive -- revertive mode
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.28
mesErpVersion
The protocol version of the ERP instance. erpV1 -- ERPv1 erpV2 -- ERPv2
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.29
mesErpPortLeft
The interface (Tx-Rx) where the left ERP link is located.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.3
mesErpMajorName
The management name of the major ring that the subring is connected to. For example 'erp2:1:5:1:4094' (erp:[subrack]:[slot]:[ringId]:[vlanId]).
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.32.2.26.1.1.30
mesErpRingId
Ring ID for the ERPv2 instance. All ERP instances must have the same ring ID throughout the ERP ring.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.31
mesErpRingIndex
Index of ring used by VLAN Protection Groups and VLAN Map when referring to a ring.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.32
mesErpOperatorCommand
The operator commands. noRequest (1) -- initial state and the return state after issuing an operator command. forced left (2) -- force a block on the left ring port where th…
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.33
mesErpGroupId
Unique number identifying group VLAN protection group for the R-APS VLAN of this ring.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.34
mesErpSwitchInformation
User has set a manual or a forced ERP switch.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.26.1.1.35
mesErpTopologyChangePropagation
Disable or enable forwarding of topology change from sub-ring to major ring.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.36
mesErpSubRings
List of Ring Indexs of connected ERP v2 sub rings,
columnSNMPv2-SMICounter64.1.3.6.1.4.1.8708.2.32.2.26.1.1.37
mesErpResourceTypeLeft
The type of resource the left leg of erp is connected.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.38
mesErpLagIdLeft
Id of the left lag connected to erp.
columnOctetString.1.3.6.1.4.1.8708.2.32.2.26.1.1.39
mesErpPortRight
The interface (Tx-Rx) where the right ERP link is located.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.4
mesErpResourceTypeRight
The type of resource the right leg of erp is connected.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.26.1.1.40
mesErpLagIdRight
Id of the right lag connected to erp.
columnOctetString.1.3.6.1.4.1.8708.2.32.2.26.1.1.41
mesErpInterfaceLeft
Displayname for the left interface connected to erp.
columnOctetString.1.3.6.1.4.1.8708.2.32.2.26.1.1.42
mesErpInterfaceRight
Displayname for the right interface connected to erp.
columnOctetString.1.3.6.1.4.1.8708.2.32.2.26.1.1.43
mesErpProvisioningMismatch
Detected if the RPL owner receives one or more No request R-APS message(s) with the RPL blocked status flag set (NR, RB) and a node ID that differs from its own. dFOP-PM in G.8032.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.26.1.1.44
mesErpIfNoLeft
The left interface number of the multi-connector port or port group.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.32.2.26.1.1.45
mesErpTxPortLeft
The TX-port of the left interface.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.32.2.26.1.1.46
mesErpIfNoRight
The right interface number of the multi-connector port or port group.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.32.2.26.1.1.47
mesErpTxPortRight
The TX-port of the right interface.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.32.2.26.1.1.48
mesErpOamDetectionVlanId
The VLAN ID in CCM:s used for OAM detection.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.49
mesErpAdminStatus
The administrative state for the object. service - The object is activated but alarms are suppressed. Intended for use during service or re-configuration. When serv…
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.32.2.26.1.1.5
mesErpInternalReference
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.6
mesErpDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.32.2.26.1.1.7
mesErpVlanId
All control messaging (R-APS channel) for the ring are transmitted on a specific VLAN ID.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.26.1.1.8
mesErpMegLevel
The Maintenance Domain Level (or MEG Level). The MEG level must be the same across all ERP instances in the same ERP ring.
columnDot1agCfmMDLevel.1.3.6.1.4.1.8708.2.32.2.26.1.1.9