mesVlanTagRuleConfigurePrioAssignment
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.21.1.1.12
Object
column
LUM-TCCommandString
Defines if the priority is copied from ingress tag or set to a specific value.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.21.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mesVlanTagRuleEntry
- Table
- mesVlanTagRuleTable
- Siblings
- 14
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesVlanTagRuleIndex An arbitrary index assigned to each rule entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.21.1.1.1 |
| mesVlanTagRuleOuterPrio The new outer VLAN priority.
Only needed for the following operations:
- push
- swap
- pushPush
- swapPush
- swapSwap
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.21.1.1.10 |
| mesVlanTagRulePrioAssignment Defines how the priority is assigned when pushing
VLAN ID on ingress.
set - Set to specified value.
copy - Use the priority from the ingress tag.
… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.21.1.1.11 |
| mesVlanTagRuleQueue The VLAN queue number if 'type' is 'queue'.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.21.1.1.13 |
| mesVlanTagRuleRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
Note: The newly created object will not necessarily
receive the same index as used in the crea… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.32.2.21.1.1.14 |
| mesVlanTagRuleInterfaceName Vlan Tag Rule interface name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.21.1.1.15 |
| mesVlanTagRuleName The management name of the rule, for example
'rule:1'. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.21.1.1.2 |
| mesVlanTagRuleInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.21.1.1.3 |
| mesVlanTagRuleClassificationName The name of the classification associated with this
rule. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.21.1.1.4 |
| mesVlanTagRuleType Indicates if the type of the rule.
ingress - The rule applies to ingress traffic.
egress - The rule applies to egress traffic.
queue - Indicates mapping to a spe… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.21.1.1.5 |
| mesVlanTagRuleOperation The type of operation applied to this rule.
For ingress direction, only push and swap are
currently supported.
For egress direction, only pop and pop… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.21.1.1.6 |
| mesVlanTagRuleInnerVlanId The new inner VLAN ID.
Only needed for the following operations:
- pushPush
- swapPush
- swapSwap
- popSwap
This attribute can be written via SNMP.
Values: 4095-409… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.21.1.1.7 |
| mesVlanTagRuleInnerPrio The new inner VLAN priority.
Only needed for the following operations:
- pushPush
- swapPush
- swapSwap
- popSwap
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.21.1.1.8 |
| mesVlanTagRuleOuterVlanId The new outer VLAN ID.
Only needed for the following operations:
- push
- swap
- pushPush
- swapPush
- swapSwap
This attribute can be written via SNMP.
Values: 4095… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.21.1.1.9 |