mesCfmMepLocalDeviceName

LUM-MES-MIB · .1.3.6.1.4.1.8708.2.32.2.25.1.1.29
MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
The name of device the MEP is created and associated.
Only valid when the local device type is nidGe.

Context

MIB
LUM-MES-MIB
OID
.1.3.6.1.4.1.8708.2.32.2.25.1.1.29
Type
column
Access
readwrite
Status
current
Parent
mesCfmMepEntry
Table
mesCfmMepTable
Siblings
49

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mesCfmMepIndex
The index to the MEP table. This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to whic…
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.25.1.1.1
mesCfmMepType
The type of the MEP. Local (Tx) or Remote (Rx). Only one local MEP is allowed in each MEG. This attribute can be written via SNMP.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.25.1.1.10
mesCfmMepIdentifier
Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific …
columnDot1agCfmMepId.1.3.6.1.4.1.8708.2.32.2.25.1.1.11
mesCfmMepInternalReference
For internal use only.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.25.1.1.12
mesCfmMepRDICCM
A remote MEP is reported the RDI bit in its last CCM.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.13
mesCfmMepMACstatus
Either some remote MEP is reporting its Interface Status TLV as not isUp, or all remote MEPs are reporting a Port Status TLV that contains some value other than psUp.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.14
mesCfmMepRemoteCCM
The MEP is not receiving valid CCMs from at least one of the remote MEPs.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.15
mesCfmMepErrorCCM
The MEP has received at least one invalid CCM whose CCM Interval has not yet timed out.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.16
mesCfmMepXconCCM
The MEP has received at least one CCM from either another MAID or a lower MD Level whose CCM Interval has not yet timed out.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.17
mesCfmMepAis
Alarm indication signal.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.18
mesCfmMepChangePort deprecated
Procedure to change port.
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.32.2.25.1.1.19
mesCfmMepName
The management name of the mep, for example 'megNo1:1:6:67' (megName:subrack:slot:identifier).
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.32.2.25.1.1.2
mesCfmMepTransmitLbrStatus
Indicates if loopback response is sent. Only valid for local and down MEPs
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.25.1.1.20
mesCfmMepRowStatus
Manages creation and deletion of conceptual rows. See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the crea…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.21
mesCfmMepDirection
The direction in which the MEP faces on the Bridge port. down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Me…
columnDot1agCfmMpDirection.1.3.6.1.4.1.8708.2.32.2.25.1.1.22
mesCfmMepCcmSeqNumStatus
Value to enable or disable generation of CCM sequence number increments for a MEP. disabled(1) - the MEP transmits a sequence number set to zero enabled(2) - the M…
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.25.1.1.23
mesCfmMepRemoteCsfLos
A Remote CSF LOS indication (Loss Of Signal) has been recived from the remote MEP.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.24
mesCfmMepRemoteCsfRdi
An Remote CSF RDI indication (Remote Defect Indication) has been recived from the remote MEP.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.25
mesCfmMepRemoteCsfFdi
A Remote CSF FDI indication (Forward Defect Indication) has been recived from the remote MEP.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.26
mesCfmMepLocalCsfLos
A Local CSF LOS indication (Loss Of Signal Defect Indication) has been recived on the local MEP.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.27
mesCfmMepLocalDeviceType
The type of device the MEP is created and associated.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.25.1.1.28
mesCfmMepMaid
The identifier of the MEG this MEP belongs to. Persistent cross-reference to MEG table.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.32.2.25.1.1.3
mesCfmMepLocalDeviceId
An arbitrary index(aka sdId) assigned to the local device entry, where the MEP is associated to. Only valid when the local device type is nidGe.
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.25.1.1.30
mesCfmMepViewFilter
The type of device the MEP is created, this attribute is used to filter object in views.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.25.1.1.31
mesCfmMepUnexpectedPeriod
Unexpected Period, alarm signal received from nid which together with Unexpected MEP ID trigger the ErrorCCM alarm.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.32
mesCfmMepUnexpectedMepId
Unexpected MEP-ID, alarm signal received from nid which together with Unexpected Period trigger the ErrorCCM alarm
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.33
mesCfmMepUnexpectedMegLevel
Unexpected Meg Level, alarm signal received from nid which together with Mismerge trigger the XconCCM alarm
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.34
mesCfmMepMismerge
Mismerge, alarm signal received from nid which together with Unexpected Meg Level trigger the XconCCM alarm
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.35
mesCfmMepNoOfLMs
The current number of LM Sessions with this MEP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.32.2.25.1.1.36
mesCfmMepNoOfDMs
The current number of DM Sessions with this MEP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.32.2.25.1.1.37
mesCfmMepAssociateLM
Procedure to add Y.1731/MEF-35 Loss Measurement to a remote MEP. LMM interval - Interval of LMM messages, 1s, 10s, 100ms. Type - MEP or MAC Address, (MEP for Automatic…
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.32.2.25.1.1.38
mesCfmMepAssociateDM
Procedure to add Y.1731/MEF-35 Delay Measurement to a remote MEP. DMM interval - Interval of DMM messages, 100ms, 1s, 10s. Type - MEP or MAC Address, (MEP for Automati…
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.32.2.25.1.1.39
mesCfmMepTxPort
The Tx-port of the MEP. This attribute can be written via SNMP.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.32.2.25.1.1.4
mesCfmMepTransmitDmrStatus
Indicates if Delay Measurement (DM) responder is active. Only valid for down MEPs
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.25.1.1.40
mesCfmMepTransmitLmrStatus
Indicates if Loss Measurement (LM) responder is active. Only valid for down MEPs
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.25.1.1.41
mesCfmMepLmCosAwareness
Define CoS awareness for the LM responder. A CoS aware LM Responder will return counters associated with the priority of the incoming LMM packets. priorityBlind - L…
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.25.1.1.42
mesCfmMepResourceType
The type of resource the MEP is connected.
columnEnumeration.1.3.6.1.4.1.8708.2.32.2.25.1.1.43
mesCfmMepLagId
Id of the lag connected to mep.
columnOctetString.1.3.6.1.4.1.8708.2.32.2.25.1.1.44
mesCfmMepInterfaceName
Name of the Interface connected to mep.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.32.2.25.1.1.45
mesCfmMepIfNo
The interface number of the multi-connector port or port group.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.32.2.25.1.1.46
mesCfmMepLocalId
Id for index calculation.
columnInteger32.1.3.6.1.4.1.8708.2.32.2.25.1.1.47
mesCfmMepSubrack
The number of the subrack where the Mep is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.32.2.25.1.1.48
mesCfmMepSlot
The number of the slot where the Mep is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.32.2.25.1.1.49
mesCfmMepPortName
The name of the port this MEP belongs to.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.32.2.25.1.1.5
mesCfmMepServiceId
Service ID is used by TNM for multi-layer service and network management. Default value is -1. All objects that created from ENM will have default service ID. Change of the servic…
columnLUM-TCServiceIdWithNotUsed.1.3.6.1.4.1.8708.2.32.2.25.1.1.50
mesCfmMepAdminStatus
The administrative state for the object. down - The object is de-activated. service - The object is activated but alarms are suppressed. Intended for…
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.6
mesCfmMepOperStatus
The operational state for the object. notPresent - The object is not available. down - The object is de-activated or there are faults preventing its …
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.32.2.25.1.1.7
mesCfmMepPrimaryVid
An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MA of the MEP. The value 0 indicates that either the Primary VID is that of the MEP's MA, …
columnUnsigned32.1.3.6.1.4.1.8708.2.32.2.25.1.1.8
mesCfmMepVlanPriority
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is the CCM priority. This attribute can be written via SNMP.
columnInteger32.1.3.6.1.4.1.8708.2.32.2.25.1.1.9