mesLagLacpMaxNumberOfActiveLinks
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.15.1.1.16
Object
column
r/w
Unsigned32
Define the maximum number of active links within a LAG. The range is normally from 1 to 8 (0 is though set if McLAG is disabled/removed from the LAG). If the maximum number of active links equals to the number of ports configured in the LAG, the load is distributed on all links in the LAG. If the maximum number of active links is less than the number of ports configured in the LAG, traffic is carried by the primary link(s) while the other(s) is used as a standby link(s) in case of failure on the primary link. Port priority is used to determine the active links.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.15.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mesLagEntry
- Table
- mesLagTable
- Siblings
- 44
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-12
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesLagIndex An arbitrary index assigned to each LAG entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.1 |
| mesLagLacpEnabled Enables LACP for the LAG.
Passive - Passive LACP indicates the ports preference for not transmitting LACPDUs unless
its Partners control value is Active LACP (i.e.,… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.15.1.1.10 |
| mesLagLacpSystemPriority System priority -
The system priority of the system. A lower value indicates a higher priority [0...65535] | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.11 |
| mesLagLacpPeriod LACP period
slow - LACP messages are received using a 30 second transmission interval with a timeout of 90 seconds.
fast - LACP messages are received using a one se… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.15.1.1.12 |
| mesLagLacpLinkProtection deprecated LACP link protection
normal - The load is distributed on all links in the LAG.
onePlusOne - All traffic is carried by the primary link while the other is used as a … | column | MesLacpLinkProtectionValue | .1.3.6.1.4.1.8708.2.32.2.15.1.1.13 |
| mesLagDegraded LAG degraded
Alarm - One or more of the links have link and/or LACP fault.
Ok - All links and LACP (if used) are up. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.14 |
| mesLagFailure LAG failure
Alarm - All of the links have link and/or LACP fault.
Ok - At least one link and LACP (if used) is up. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.15 |
| mesLagNoOfPorts The number of ports in LAG. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.17 |
| mesLagLacpMinNumberOfActiveLinks Define the minimum number of active links within a LAG.
The range is normally from 1 to 8 (0 is though set if McLAG is
disabled/removed from the LAG). | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.18 |
| mesLagIsMcLag If Lag is MC Lag. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.15.1.1.19 |
| mesLagName The management name of the LAG group, for example
'lag:1:2:1'. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.2 |
| mesLagConfigureTagRule VLAN rule classification enables dynamic assignment
of VLAN when traffic is received. Currently, only
VLAN classification is possible.
Classification
… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.20 |
| mesLagNoOfTagRules The current number of VLAN tag rules associated
with this lag. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.21 |
| mesLagDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.22 |
| mesLagAdminStatus The administrative state for the object.
service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When serv… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.23 |
| mesLagOperStatus The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or there are
faults preventing its … | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.24 |
| mesLagPortmaskIf1 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.25 |
| mesLagPortmaskIf2 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.26 |
| mesLagPortmaskIf3 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.27 |
| mesLagPortmaskIf4 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.28 |
| mesLagPortmaskIf5 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.29 |
| mesLagInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.3 |
| mesLagPortmaskIf6 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.30 |
| mesLagPortmaskIf7 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.31 |
| mesLagPortmaskIf8 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.32 |
| mesLagMasterIfNo The interface number of the multi-connector port or port group. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.15.1.1.33 |
| mesLagMasterTxPort The TX-port of the interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.15.1.1.34 |
| mesLagLocalId Id for index calculation. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.35 |
| mesLagPrepareConfigPortMask Converts portmasks to input for dialog LagConfigure | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.36 |
| mesLagPortmaskIf9 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.37 |
| mesLagPortmaskIf10 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.38 |
| mesLagPortmaskIf11 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.39 |
| mesLagPortmask The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.4 |
| mesLagPortmaskIf12 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.40 |
| mesLagPortmaskIf13 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.41 |
| mesLagPortmaskIf14 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.42 |
| mesLagPortmaskIf15 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.43 |
| mesLagPortmaskIf16 The ports belonging to the link aggregation group.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.44 |
| mesLagServiceId Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the servic… | column | LUM-TCServiceIdWithNotUsed | .1.3.6.1.4.1.8708.2.32.2.15.1.1.45 |
| mesLagMasterIndex The port that is master in the LAG. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.15.1.1.5 |
| mesLagConfigure Change the members and hash algorithm in the Link
Aggregation Group.
Ports that are used in Ethernet Ring Protection
(ERP) are not available for LAG.
… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.6 |
| mesLagHash The hash algorithm used for LAG load balancing
mac - Based on src/dst MAC adresses
ip - Based on src/dst IP addresses and TCP/UDP ports
… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.15.1.1.7 |
| mesLagIdentifier Unique identifier for the LAG.
This attribute can be written via SNMP. | column | OctetString | .1.3.6.1.4.1.8708.2.32.2.15.1.1.8 |
| mesLagRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
Note: The newly created object will not necessarily
receive the same index as used in the crea… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.32.2.15.1.1.9 |