mesCfmMepRemoteCsfLos
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.25.1.1.24
Object
column
LUM-TCFaultStatus
A Remote CSF LOS indication (Loss Of Signal) has been recived from the remote MEP.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.25.1.1.24- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mesCfmMepEntry
- Table
- mesCfmMepTable
- Siblings
- 49
Values & Constraints
Type Values
1 | ok |
2 | alarm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mesCfmMepIndex The index to the MEP table.
This object is the interface index of the interface
either a bridge port, or an aggregated IEEE 802.1
link within a bridge port, to whic… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.1 |
| mesCfmMepType The type of the MEP. Local (Tx) or Remote (Rx).
Only one local MEP is allowed in each MEG.
This attribute can be written via SNMP. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.10 |
| mesCfmMepIdentifier Integer that is unique among all the MEPs in the
same MA.
Other definition is: a small integer,
unique over a given Maintenance Association,
identifying a specific … | column | Dot1agCfmMepId | .1.3.6.1.4.1.8708.2.32.2.25.1.1.11 |
| mesCfmMepInternalReference For internal use only. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.12 |
| mesCfmMepRDICCM A remote MEP is reported the RDI bit in its last
CCM. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.13 |
| mesCfmMepMACstatus Either some remote MEP is reporting its Interface
Status TLV as not isUp, or all remote MEPs are
reporting a Port Status TLV that contains some
value other than psUp. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.14 |
| mesCfmMepRemoteCCM The MEP is not receiving valid CCMs from at least
one of the remote MEPs. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.15 |
| mesCfmMepErrorCCM The MEP has received at least one invalid CCM whose
CCM Interval has not yet timed out. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.16 |
| mesCfmMepXconCCM The MEP has received at least one CCM from either
another MAID or a lower MD Level whose CCM Interval
has not yet timed out. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.17 |
| mesCfmMepAis Alarm indication signal. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.18 |
| mesCfmMepChangePort deprecated Procedure to change port. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.19 |
| mesCfmMepName The management name of the mep, for example
'megNo1:1:6:67' (megName:subrack:slot:identifier). | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.2 |
| mesCfmMepTransmitLbrStatus Indicates if loopback response is sent. Only valid for local and down MEPs | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.20 |
| mesCfmMepRowStatus Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.
Note: The newly created object will not necessarily
receive the same index as used in the crea… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.21 |
| mesCfmMepDirection The direction in which the MEP faces on the Bridge port.
down(1) Sends Continuity Check Messages away from the
MAC Relay Entity.
up(2) Sends Continuity Check Me… | column | Dot1agCfmMpDirection | .1.3.6.1.4.1.8708.2.32.2.25.1.1.22 |
| mesCfmMepCcmSeqNumStatus Value to enable or disable generation of CCM sequence number increments for a MEP.
disabled(1) - the MEP transmits a sequence number set to zero
enabled(2) - the M… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.23 |
| mesCfmMepRemoteCsfRdi An Remote CSF RDI indication (Remote Defect Indication) has been recived from the remote MEP. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.25 |
| mesCfmMepRemoteCsfFdi A Remote CSF FDI indication (Forward Defect Indication) has been recived from the remote MEP. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.26 |
| mesCfmMepLocalCsfLos A Local CSF LOS indication (Loss Of Signal Defect Indication) has been recived on the local MEP. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.27 |
| mesCfmMepLocalDeviceType The type of device the MEP is created and associated. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.28 |
| mesCfmMepLocalDeviceName The name of device the MEP is created and associated.
Only valid when the local device type is nidGe. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.29 |
| mesCfmMepMaid The identifier of the MEG this MEP belongs to.
Persistent cross-reference to MEG table. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.3 |
| mesCfmMepLocalDeviceId An arbitrary index(aka sdId) assigned to the local device
entry, where the MEP is associated to.
Only valid when the local device type is nidGe. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.30 |
| mesCfmMepViewFilter The type of device the MEP is created,
this attribute is used to filter object in views. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.31 |
| mesCfmMepUnexpectedPeriod Unexpected Period, alarm signal received from nid
which together with Unexpected MEP ID trigger the
ErrorCCM alarm. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.32 |
| mesCfmMepUnexpectedMepId Unexpected MEP-ID, alarm signal received from nid
which together with Unexpected Period trigger the
ErrorCCM alarm | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.33 |
| mesCfmMepUnexpectedMegLevel Unexpected Meg Level, alarm signal received from nid
which together with Mismerge trigger the
XconCCM alarm | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.34 |
| mesCfmMepMismerge Mismerge, alarm signal received from nid
which together with Unexpected Meg Level trigger the
XconCCM alarm | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.35 |
| mesCfmMepNoOfLMs The current number of LM Sessions with this MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.36 |
| mesCfmMepNoOfDMs The current number of DM Sessions with this MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.37 |
| mesCfmMepAssociateLM Procedure to add Y.1731/MEF-35 Loss Measurement to a remote MEP.
LMM interval - Interval of LMM messages, 1s, 10s, 100ms.
Type - MEP or MAC Address, (MEP for Automatic… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.38 |
| mesCfmMepAssociateDM Procedure to add Y.1731/MEF-35 Delay Measurement to a remote MEP.
DMM interval - Interval of DMM messages, 100ms, 1s, 10s.
Type - MEP or MAC Address, (MEP for Automati… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.39 |
| mesCfmMepTxPort The Tx-port of the MEP.
This attribute can be written via SNMP. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.25.1.1.4 |
| mesCfmMepTransmitDmrStatus Indicates if Delay Measurement (DM) responder is active. Only valid for down MEPs | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.40 |
| mesCfmMepTransmitLmrStatus Indicates if Loss Measurement (LM) responder is active. Only valid for down MEPs | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.41 |
| mesCfmMepLmCosAwareness Define CoS awareness for the LM responder.
A CoS aware LM Responder will return counters associated with the priority of the incoming LMM packets.
priorityBlind - L… | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.42 |
| mesCfmMepResourceType The type of resource the MEP is connected. | column | Enumeration | .1.3.6.1.4.1.8708.2.32.2.25.1.1.43 |
| mesCfmMepLagId Id of the lag connected to mep. | column | OctetString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.44 |
| mesCfmMepInterfaceName Name of the Interface connected to mep. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.45 |
| mesCfmMepIfNo The interface number of the multi-connector port or port group. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.32.2.25.1.1.46 |
| mesCfmMepLocalId Id for index calculation. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.47 |
| mesCfmMepSubrack The number of the subrack where the Mep is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.32.2.25.1.1.48 |
| mesCfmMepSlot The number of the slot where the Mep is located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.32.2.25.1.1.49 |
| mesCfmMepPortName The name of the port this MEP belongs to. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.32.2.25.1.1.5 |
| mesCfmMepServiceId Service ID is used by TNM for multi-layer
service and network management.
Default value is -1. All objects that created
from ENM will have default service ID.
Change of the servic… | column | LUM-TCServiceIdWithNotUsed | .1.3.6.1.4.1.8708.2.32.2.25.1.1.50 |
| mesCfmMepAdminStatus The administrative state for the object.
down - The object is de-activated.
service - The object is activated but alarms
are suppressed. Intended for… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.6 |
| mesCfmMepOperStatus The operational state for the object.
notPresent - The object is not available.
down - The object is de-activated or there are
faults preventing its … | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.32.2.25.1.1.7 |
| mesCfmMepPrimaryVid An integer indicating the Primary VID of the MEP,
always one of the VIDs assigned to the MA of the
MEP. The value 0 indicates that either the Primary
VID is that of the MEP's MA, … | column | Unsigned32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.8 |
| mesCfmMepVlanPriority Priority. 3 bit value to be used in the VLAN tag,
if present in the transmitted frame.
The default value is the CCM priority.
This attribute can be written via SNMP. | column | Integer32 | .1.3.6.1.4.1.8708.2.32.2.25.1.1.9 |