ALU-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
47
Rows
47
Columns
496

aluExtTmnxDS1PortTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.1 · 1 row entry · 2 columns
Open in standard view 
The aluExtTmnxDS1PortTable has an entry for a DS1 physical port.
aluExtTmnxDS1PortEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.1.1
Each row entry represents extended functionality of a physical
DS1 port on Nokia 7705 SAR devices. Entries cannot be
created or deleted via SNMP SET operations. Entries in this table
will be created or deleted auto…
Indexes
No indexes recorded
Column Syntax OID
aluExtDS1PortLineImpedance
The value of aluExtDS1PortLineImpedance indicates the current line
impedance set on the physical T1/E1 port.

T1 Ports may only be configured to have an impedance of 100 Ohms.

E1 Ports may …
Enumerationr/w
Enumerated Values:
0notApplicable
1impedance75Ohms
2impedance100Ohms
3impedance120Ohms
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.1.1.1
aluExtDS1PortLineEncoding
The value of aluExtDS1PortLineEncoding indicates the Zero Code
Suppression set on the physical T1/E1 port.
Enumerationr/w
Enumerated Values:
0notApplicable
1b8zs
2ami
3hdb3
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.1.1.2

aluExtTmnxPortEtherTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.2 · 1 row entry · 29 columns
Open in standard view 
The aluExtTmnxPortEtherTable has an entry for each Ethernet port.
aluExtTmnxPortEtherEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1
Each row entry represents extended functionality of a Ethernet port
on Nokia 7705 SAR devices. Entries cannot be
created or deleted via SNMP SET operations. Entries in this table
will be created or deleted automatic…
Indexes
No indexes recorded
Column Syntax OID
aluExtPortEtherSfpSyncEStatus
The value of aluExtPortEtherSfpSyncEStatus indicates whether or not
the SFP installed in the port is capabable of supporting synchronous
Ethernet (syncE) communications.

not-applicable - The port does no…
Enumeration
Enumerated Values:
0not-applicable
1capable
2incapable
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.1
aluExtPortEtherLoopback
aluExtPortEtherLoopback is used to put an ethernet port into a loopback mode.
Setting aluExtPortEtherLoopback must be accompanied by setting aluExtPortEtherLoopbackTimer
for the same port.

A 'l…
Enumerationr/w
Enumerated Values:
0none
1line
2internal
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.2
aluExtPortEtherLoopbackTimer
aluExtPortEtherLoopbackTimer is used to specify the time duration, in seconds, to set the ethernet port
into a loopback mode. Setting aluExtPortEtherLoopbackTimer to a non-zero value must be accompanied by
setting alu…
Unsigned32r/w
Constraints:
range: 30-86400
range: 0-0
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.3
aluExtPortEtherLoopbackTimeLeft
aluExtPortEtherLoopbackTimeLeft is used to specify the number of seconds left since the loopback has started.
0 if aluExtPortEtherLoopbackTimer was assigned 0, or when aluExtPortEtherLoopback is 'none'.
Unsigned32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.4
aluExtPortEtherNwSchedulerMode
The value of aluExtPortEtherNwSchedulerMode indicates the mode that the
egress scheduler is provisioned to operate in.

profile - Basic in/out scheduling
four-priority - Expedited/Best-Effort plus …
Enumerationr/w
Enumerated Values:
0profile
1four-priority
2sixteen-priority
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.5
aluExtPortEtherLoopbackCfmLbMode
aluExtPortEtherLoopbackCfmLbMode is to enable/disable an ethernet port to reply to an ethernet CFM
Loopback Message (LBM) frame at the port level. If enabled then it indicates the desired egress QoS
priority treatment …
Enumerationr/w
Enumerated Values:
0disabled
1priority-low
2priority-high
3priority-dot1p
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.6
aluExtPortEtherCfmLbmRx
aluExtPortEtherCfmLbmRx indicates the received number of Ethernet
CFM Loopback messages (ETH-LBM) with destination MAC address matches
tmnxPortMacAddress of this port, while aluExtPortEtherLoopbackCfmLbMode
is enabled.…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.7
aluExtPortEtherCfmLbmDropped
aluExtPortEtherCfmLbmDropped indicates the number of received, but
discarded Ethernet CFM Loopback messages (ETH-LBM) at this port
while its aluExtPortEtherLoopbackCfmLbMode is enabled.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.8
aluExtPortEtherCfmLbrTx
aluExtPortEtherCfmLbrTx indicates the number of Ethernet CFM
Loopback Replies (ETH-LBR) that were sent back to the sender, in reponding to the
received ETH-LBM at this port while aluExtPortEtherLoopbackCfmLbMode is
enab…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.9
aluExtPortEtherLoopbackSwapMacAddr
This variable indicates if Source and Destination MAC addresses in the packets are to be
interchanged before being loopbacked to the sender. Setting aluExtPortEtherLoopbackSwapMacAddr
must be accompanied by setting alu…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.10
aluExtPortEtherAdminPhyTxClock
The value of aluExtPortEtherAdminPhyTxClock indicates the mode
used to establish timing control of a 1000BASE-T port. The
aluExtPortEtherAdminPhyTxClock is used to control the setting
of register 9, bits 10-12 that ar…
Enumerationr/w
Enumerated Values:
0notApplicable
1slave
2master
3auto-pref-slave
4auto-pref-master
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.11
aluExtPortEtherOperPhyTxClock
The value of aluExtPortEtherOperPhyTxClock indicates the operational
value of the MASTER-SLAVE Configuration Resolution bit of register 10
from Table 40-3 of IEEE 802.3-2008. When the bit is cleared the
aluExtPortEther…
Enumeration
Enumerated Values:
0notApplicable
1slave
2master
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.12
aluEthPtpTimestampCapable
The aluEthPtpTimestampCapable indicates whether
the hardware is capable of supporting 1588 PTP time stamp
functions.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.13
aluEthPtpTimestampEnable
the aluEthPtpTimestampEnable attribute indicate whether
the port is enabled to support 1588 PTP edge time stamp
functions.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.14
aluEthPtpAsymmetry obsolete
aluEthPtpAsymmetry is a path asymmetry correction value
that is used to specify the difference in transmission time
between master-to-slave and slave-to-master. The value
can be derived from the following formula.
…
nanosecondsInteger32r/w
Constraints:
range: -8388608-8388607
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.15
aluExtPortEtherLoopbackPersist
Setting this variable to 'true' indicates the configuration of aluExtPortEtherLoopback,
aluExtPortEtherLoopbackPersist, aluExtPortEtherLoopbackSwapMacAddr can be saved
to persist over system reboots.

Set…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.16
aluPortEtherIngressRateCbs
aluPortEtherIngressRateCbs specifies the committed burst size that hard policer can accept while complying
to the ingress rate tmnxPortEtherIngressRate of the port.

aluPortEtherIngressRateCbs is not appl…
bytesUnsigned32r/w
Constraints:
range: 1-130816
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.17
aluPortEtherIngressRateSrcPause
aluPortEtherIngressRateSrcPause indicates whether to send a pause frame for every dropped packet
by the hard policer when tmnxPortEtherIngressRate is > 0.

aluPortEtherIngressRateSrcPause is not applicabl…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.18
aluPortEtherXorMode
The aluPortEtherXorMode variable specifies the type of physical connector
for MDA ports which support configurable connector type. aluPortEther
must be 'notApplicable' if the MDA port does not support xor mode configura…
Enumerationr/w
Enumerated Values:
0notApplicable
1rj45
2sfp
3rjp5
4auto
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.19
aluPortEtherEgrUnshapedSapCir
The value of aluPortEtherEgrUnshapedSapCir specifies the egress CIR of all unshaped SAPs,
i.e. all SAPs using this port that have aluSapEgressSchedulerMode in 4-priority-mode.
kbpsInteger32r/w
Constraints:
range: -1-10000000
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.20
aluExtPortEtherVlanFilter
aluExtPortEtherVlanFilter specifies the VLAN filter provisioned for bridge ethernet
ports. The value -1 indicates that no VLAN filter is configured.
Integer32r/w
Constraints:
range: 1-65535
range: -1--1
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.21
aluExtPortEtherCfmLbVlanList
The aluExtPortEtherCfmLbVlanList is an OCTET STRING in which a list of Vlan Ids to be enabled for cfm Loopback when
aluExtPortEtherLoopbackCfmLbMode is priority-dot1p.

Any incoming CFM LB frame destined …
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.22
aluExtPortEtherAccEgrShaper
aluExtPortEtherNetEgrShaper contains the access egress shaper policy if the tmnxPortMode is hybrid.
Otherwise this object has no significance.
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TIMETRA-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.23
aluExtPortEtherNetEgrShaper
aluExtPortEtherNetEgrShaper contains the network egress shaper policy if the tmnxPortMode is hybrid.
Otherwise this object has no significance.
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TIMETRA-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.24
aluPortEtherEgrUnshapedNwIfCir
The value of aluPortEtherEgrUnshapedNwIfCir specifies the egress CIR of all unshaped network interfaces
on this port, i.e. those network interfaces on this port without a network queue policy, their
aluVrtrIfNetworkEgr…
kbpsInteger32r/w
Constraints:
range: -1-10000000
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.25
aluExtPortEtherEgrRateIncludeFCS
This variable indicates if the value of tmnxPortEtherEgressRate of the port includes 4 bytes
of ethernet frame check sequence (FCS).
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.26
aluPortEtherOperXorMode
The aluPortEtherOperXorMode specifies the type of physical connector used
when MDA ports are configured as auto xor mode. aluPortEtherOperXorMode
must be 'notApplicable' if the MDA port does not support xor mode configu…
Enumeration
Enumerated Values:
0notApplicable
1rj45
2sfp
3rjp5
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.27
aluExtPortEtherBnAllowed
The aluExtPortEtherBnAllowed allows the handling of the received ETH-BN to be processed,
and possibly to enforce the bandwidth indicated in the ETH-BN by changing the egress-rate
of the port.

When modify …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.28
aluExtPortEtherBnHoldTime
aluExtPortEtherBnHoldTime is the time interval to hold aluExtPortEtherBnEgressRateInUse
when changed. This guards against excessive rate changes.

aluExtPortEtherBnHoldTime is applicable only when aluExtP…
secondsUnsigned32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.2.1.29

aluExtTmnxDS1Table

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.3 · 1 row entry · 8 columns
Open in standard view 
The aluExtTmnxDS1Table has an entry for a DS1 physical port or channel.
aluExtTmnxDS1Entry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.3.1
Each row entry represents extended functionality of a DS1 physical
port or channel on Nokia 7705 SAR devices. Entries cannot be
created or deleted via SNMP SET operations. Entries in this table
will be created or d…
Indexes
No indexes recorded
Column Syntax OID
aluExtDS1HoldTimeUp
The value of aluExtDS1HoldTimeUp is used to configure the
hold-timer for link up event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent trans…
deci-secondsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.3.1.1
aluExtDS1HoldTimeDown
The value of aluExtDS1HoldTimeDown is used to configure the
hold-timer for link down event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent t…
deci-secondsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.3.1.2
aluExtDS1SignalBitsState
aluExtDS1SignalBitsState is an array of bytes used to indicate the
current state of the ABCD signalling bits for all timeslots of a
DS1/E1.

The first half of the array or the 32 most significant bytes des…
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.3.1.3
aluExtDS1E1Ssm
aluExtDS1E1Ssm specifies whether or not Synchronous Status
Messages (SSM) are enabled on the DS1/E1 port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.3.1.4
aluExtDS1E1SsmTxDus
The value of aluExtDS1E1SsmTxDus specifies whether or not the
value 0xF (dus/dnu) is forced in the Synchronous Status Message.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.3.1.5
aluExtE1SsmSaBit
The value of aluExtE1SsmSaBit specifies the national use bit to
carry SSM Messages. This applies only to E1 interfaces.

aluExtE1SsmSaBit is not supported on DS1 interfaces and
cannot be written. aluExtE1S…
Unsigned32r/w
Constraints:
range: 4-8
range: 0-0
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.3.1.6
aluExtDs1E1TxSsmValue
The value of aluExtDs1E1TxSsmValue indicates the Synchronous Status
Message (SSM) value that is transmitted on the line.

On ports that do not support SSM or for ports that do not have
SSM enabled the aluE…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.3.1.7
aluExtDs1E1RxSsmValue
The value of aluExtDs1E1RxSsmValue indicates the last Synchronous Status
Message (SSM) value that was received by the port.

On ports that do not support SSM or for ports that do not have
SSM enabled the a…
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.3.1.8

aluRS232PortTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.4 · 1 row entry · 2 columns
Open in standard view 
The aluRS232PortTable has an entry for a physical Serial Data port.
aluRS232PortEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.4.1
Each row entry represents a physical Serial Data port on an
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically whe…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluRS232PortLastChangeTime
aluRS232PortLastChangeTime contains the sysUpTime
value of the most recently modified writable variable in the
aluRS232PortEntry row for this port.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.4.1.1
aluRS232PortType
aluRS232PortType configures the interface-type of the physical
port to one of the defined values, above.

Regarding sdiv1 and sdiv2 (tmnxMDAAssignedType 11 and 56):
Due to hardware limitations, each port i…
Enumerationr/w
Enumerated Values:
1rs232
2v35
3x21
4rs530
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.4.1.2

aluRS232Table

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.5 · 1 row entry · 40 columns
Open in standard view 
aluRS232Table has an entry for each Serial 
channel on each IOM card in each chassis in the system.
aluRS232Entry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1
Each row entry represents a Serial channel on an IOM card
in a chassis in the system. Channel entries for
serial ports can be created and deleted via SNMP SET operations.
For each aluRS232Entry, there will be a corres…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluRS232RowStatus
aluRS232RowStatus controls the creation and deletion of
row entries in the aluRS232Table.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiMOS encoding scheme.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.1
aluRS232LastChangeTime
aluRS232LastChangeTime contains the sysUpTime value of the
most recently modified writable variable in the
aluRS232Entry row for this Serial channel.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.2
aluRS232Type
aluRS232Type configures the interface for RS-232, V.35, X.21 or
RS-530.
Enumeration
Enumerated Values:
1rs232
2v35
3x21
4rs530
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.3
aluRS232DeviceMode
aluRS232DeviceMode configures the interface for
synchronous or asynchronous operation.

Changing to asynchronous results in defaulting of
aluRS232CharacterLength, aluRS232Parity and aluRS232StopBits.
…
Enumerationr/w
Enumerated Values:
1synchronous
2asynchronous
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.4
aluRS232DeviceGender
aluRS232DeviceGender configures the gender offered by the
local interface.

dte is not valid while the sub-channel is aluRS232SocketEntry.

dte is not supported on the SAR-H and SAR-Hc system…
Enumerationr/w
Enumerated Values:
1dte
2dce
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.5
aluRS232Duplex
aluRS232Duplex configures the duplex method of the interface to
half or full duplex.

full is not allowed while aluRS232MultiDrop is slave.

half is not valid while the sub-channel is aluRS23…
Enumerationr/w
Enumerated Values:
1fullDuplex
2halfDuplex
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.6
aluRS232Speed
aluRS232Speed specifies the link speed of the Serial interface.
A value of 'speed1200' sets the link to 1200bps. A value of 'speed64k'
sets the link to 64kbps.

Valid values depend on tmnxMDAAssignedType :…
Enumerationr/w
Enumerated Values:
1speed1200
2speed2400
3speed9600
4speed19200
5speed38400
6speed56000
7speed64k
8speed128k
9speed256k
10speed384k
11speed512k
12speed640k
13speed768k
14speed896k
15speed1024k
16speed1152k
17speed1280k
18speed1408k
19speed1536k
20speed1664k
21speed1792k
22speed1920k
23speed4800
24speed600
25speed57600
26speed115200
27speed16000
28speed2048k
29speed3072k
30speed4096k
31speed5120k
32speed6144k
33speed7168k
34speed8192k
35speed9216k
36speed10240k
37speed11264k
38speed12288k
39speed13312k
40speed14336k
41speed15360k
42speed16384k
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.7
aluRS232ClockSource
aluRS232ClockSource specifies the clock for transmitted data
on a serial port.

slave(1) - clock is derived from the system
external(2) - clock is provided by the attached device
dcrSerial(3) - clock…
Enumerationr/w
Enumerated Values:
0notApplicable
1slave
2external
3dcrSerial
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.8
aluRS232Loopback
aluRS232Loopback is used to put the port into a loopback mode.
The value of tmnxPortAdminStatus should be set to outOfService
in order for the loopback to be enabled.

Both loopbacks are bidirectional. Th…
Enumerationr/w
Enumerated Values:
1none
2bidirB
3bidirE
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.9
aluRS232CharacterLength
The aluRS232CharacterLength specifies the character length.
Parameter is only valid while the port is configured for asynchronous operation.

The value of aluRS232CharacterLength plus the value of aluRS232…
Integer32r/w
Constraints:
range: 6-8
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.10
aluRS232Parity
The aluRS232Parity specifies the parity type.
Parameter is only valid while the port is configured for asynchronous operation.

The value of aluRS232CharacterLength plus the value of aluRS232StopBits
plus …
Enumerationr/w
Enumerated Values:
1none
2odd
3even
4mark
5space
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.11
aluRS232StopBits
The aluRS232StopBits specifies the stop bits.
Parameter is only valid while the port is configured for asynchronous operation.

The value of aluRS232CharacterLength plus the value of aluRS232StopBits
plus …
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.12
aluRS232ReportAlarm
The value of aluRS232ReportAlarm determines when and if to
generate aluEqPortRS232Alarm and aluEqPortRS232AlarmClear
notifications for this port:
hcmOof - Reports local HCM out-of-frame errors.
hcmRai - Reports remote H…
AluRS232ReportStatusr/w
Textual Convention: AluRS232ReportStatus Bits
Type Values:
0notUsed
1hcmOof
2hcmRai
3ctrlLeadMon
4monClockDev
5monDataInac
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.13
aluRS232ReportAlarmStatus
The value of aluRS232ReportAlarmStatus indicates the alarms on
this port.
AluRS232ReportStatus
Textual Convention: AluRS232ReportStatus Bits
Type Values:
0notUsed
1hcmOof
2hcmRai
3ctrlLeadMon
4monClockDev
5monDataInac
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.14
aluRS232ControlLeadDtrDsr
aluRS232ControlLeadDtrDsr is used to configure the DTR/DSR input lead
to an ASSUMED value.
For RS-232, V.35 and RS-530:
if local gender is DCE, lead indicates Data Terminal Ready
if local gender is DTE, lead indicat…
AluRS232ControlLeadr/w
Textual Convention: AluRS232ControlLead Enumeration
Type Values:
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.15
aluRS232ControlLeadRtsDcdC
aluRS232ControlLeadRtsDcdC is used to configure the RTS/DCD/C input lead
to an ASSUMED value.
For RS-232, V.35 and RS-530:
if local gender is DCE, lead indicates Request To Send
if local gender is DTE, lead indicate…
AluRS232ControlLeadr/w
Textual Convention: AluRS232ControlLead Enumeration
Type Values:
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.16
aluRS232ControlLeadAlbCts
aluRS232ControlLeadAlbCts is used to configure the ALB/CTS input lead
to an ASSUMED value.
For RS-232 and V.35:
if local gender is DCE, lead indicates Analog loopback
if local gender is DTE, lead indicates Clear To …
AluRS232ControlLeadr/w
Textual Convention: AluRS232ControlLead Enumeration
Type Values:
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.17
aluRS232ControlLeadRdlRi
aluRS232ControlLeadRdlRi is used to configure the RDL/RI input lead
to an ASSUMED value.
For RS-232:
if local gender is DCE, lead indicates Remote Digital Loopback
if local gender is DTE, lead indicates Ring Indica…
AluRS232ControlLeadr/w
Textual Convention: AluRS232ControlLead Enumeration
Type Values:
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.18
aluRS232ControlLeadDsrDtr
aluRS232ControlLeadDsrDtr is used to configure the DSR/DTR output lead
to a FORCED value.
For RS-232, V.35 and RS-530:
if local gender is DCE, lead indicates Data Set Ready
if local gender is DTE, lead indicates Dat…
AluRS232ControlLeadr/w
Textual Convention: AluRS232ControlLead Enumeration
Type Values:
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.19
aluRS232ControlLeadDcdRtsI
aluRS232ControlLeadDcdRtsI is used to configure the DCD/RTS/I output lead
to a FORCED value.
For RS-232, V.35 and RS-530:
if local gender is DCE, lead indicates Data Carrier Detect
if local gender is DTE, lead indic…
AluRS232ControlLeadr/w
Textual Convention: AluRS232ControlLead Enumeration
Type Values:
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.20
aluRS232ControlLeadCtsAlb
aluRS232ControlLeadCtsAlb is used to configure the CTS/ALB output lead
to a FORCED value.
For RS-232 and V.35:
if local gender is DCE, lead indicates Clear To Send
if local gender is DTE, lead indicates Analog loopb…
AluRS232ControlLeadr/w
Textual Convention: AluRS232ControlLead Enumeration
Type Values:
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.21
aluRS232ControlLeadRiRdl
aluRS232ControlLeadRiRdl is used to configure the RI/RDL output lead
to a FORCED value.
For RS-232:
if local gender is DCE, lead indicates Ring Indicator
if local gender is DTE, lead indicates Remote Digital Loopbac…
AluRS232ControlLeadr/w
Textual Convention: AluRS232ControlLead Enumeration
Type Values:
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.22
aluRS232ControlLeadsState
aluRS232ControlLeadsState is an array of byte values used to indicate
the current states of the input and output control leads. These state
values are historically known as scan and drive values, respectively.
These sta…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.23
aluRS232MultiDrop
aluRS232MultiDrop is used to configure the Multi-drop Data Bridge (MDDB)
mode of the interface.

'slave' and 'master' mode is valid for subrate (HCM) speeds only.

Changing to 'slave' results…
Enumerationr/w
Enumerated Values:
1disabled
2slave
3master
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.24
aluRS232SBitSignaling
aluRS232SBitSignaling is used to configure the S-Bit signaling
mode of the interface.

This object is valid for subrate (HCM) speeds only.

'on' is not supported while aluRS232MultiDrop is 's…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.25
aluRS232DataPosition
aluRS232DataPosition is used to configure the HCM data position.

This object is valid for subrate (HCM) speeds only.

'f0b6' is not allowed while aluRS232SBitSignaling is 'on'.
Enumerationr/w
Enumerated Values:
1f0b5
2f0b6
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.26
aluRS232HoldTimeUp
The value of aluRS232HoldTimeUp is used to configure the
hold-timer for link up event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent transi…
deci-secondsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.27
aluRS232HoldTimeDown
The value of aluRS232HoldTimeDown is used to configure the
hold-timer for link down event dampening. This guards against
reporting excessive interface transitions. This is implemented
by not advertising subsequent tr…
deci-secondsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.28
aluRS232ControlLeadsSignal
aluRS232ControlLeadsSignal is an array of byte values used to indicate
the current signal levels of the input and output control leads
(connected to the attached CPE). These values are the ones that get
signalled over t…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.29
aluRS232ControlLeadMonDtrDsr
aluRS232ControlLeadMonDtrDsr is used to configure monitoring of the
input control lead signal, DtrDsr. While monitored, detected
transitions will trigger aluRS232ControlLeadsSignalChange.

'high' and 'low'…
AluRS232ControlLeadMonr/w
Textual Convention: AluRS232ControlLeadMon Enumeration
Type Values:
1on
2off
3high
4low
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.30
aluRS232ControlLeadMonRtsDcdC
aluRS232ControlLeadMonRtsDcdC is used to configure monitoring of the
input control lead signal, RtsDcdC. While monitored, detected
transitions will trigger aluRS232ControlLeadsSignalChange.

'high' and 'lo…
AluRS232ControlLeadMonr/w
Textual Convention: AluRS232ControlLeadMon Enumeration
Type Values:
1on
2off
3high
4low
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.31
aluRS232ControlLeadMonAlbCts
aluRS232ControlLeadMonAlbCts is used to configure monitoring of the
input control lead signal, AlbCts. While monitored, detected
transitions will trigger aluRS232ControlLeadsSignalChange.

For RS-530, AlbC…
AluRS232ControlLeadMonr/w
Textual Convention: AluRS232ControlLeadMon Enumeration
Type Values:
1on
2off
3high
4low
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.32
aluRS232ControlLeadMonRdlRi
aluRS232ControlLeadMonRdlRi is used to configure monitoring of the
input control lead signal, RdlRi. While monitored, detected
transitions will trigger aluRS232ControlLeadsSignalChange.

For RS-530, RdlRi …
AluRS232ControlLeadMonr/w
Textual Convention: AluRS232ControlLeadMon Enumeration
Type Values:
1on
2off
3high
4low
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.33
aluRS232ClockSyncState
The value of aluRS232ClockSyncState indicates the current clock
synchronization state if aluRS232ClockSource is 'dcrSerial'.

unknown(0) - Unsupported or unknown state
normal(1) - Normal (lock…
Enumeration
Enumerated Values:
0unknown
1normal
2holdOver
3freeRun
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.34
aluRS232ClockMasterPortId
The value of aluRS232ClockMasterPortId indicates the current clock
synchronization master port id if aluRS232ClockSource is
'dcrSerial'.
TIMETRA-TC-MIBTmnxPortID
Textual Convention: TIMETRA-TC-MIBTmnxPortID Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.35
aluRS232InvertClock
The value of aluRS232InvertClock specifies whether to invert the
clock edge that the interface samples for received data (if local
gender is DCE) or transmitted data (if local gender is DTE).

Inverting th…
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.36
aluRS232MonClockDeviationRaise
The value of the object aluRS232MonClockDeviationRaise specifies the
amount of time to debounce clock deviation before asserting the port
fault condition, 'monClockDeviation'. Clock deviation is detected
when the extern…
secondsUnsigned32r/w
Constraints:
range: 10-100
range: 0-0
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.37
aluRS232MonClockDeviationClear
The value of the object aluRS232MonClockDeviationClear specifies the
amount of time to debounce no clock deviation before de-asserting the
port fault condition, 'monClockDeviation'. No clock deviation is
detected when t…
secondsUnsigned32r/w
Constraints:
range: 10-100
range: 0-0
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.38
aluRS232MonDataInactivityRaise
The value of the object aluRS232MonDataInactivityRaise specifies the
amount of time to debounce data inactivity before asserting the port
fault condition, 'monDataInactivity'.

The special value 0 means da…
secondsUnsigned32r/w
Constraints:
range: 10-100
range: 0-0
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.39
aluRS232MonDataInactivityClear
The value of the object aluRS232MonDataInactivityClear specifies the
amount of time to debounce data activity before de-asserting the
port fault condition, 'monDataInactivity'.

The special value 0 means d…
secondsUnsigned32r/w
Constraints:
range: 10-100
range: 0-0
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.5.1.40

aluRS232ChanGroupTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.6 · 1 row entry · 8 columns
Open in standard view 
The aluRS232ChanGroupTable has an entry for 64kbps (DS0) channels 
grouped together and belonging to a particular Serial channel.
aluRS232ChanGroupEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.6.1
Each row entry represents one or more Serial channels on an
interface.

Entries can be created and deleted via SNMP SET operations
using the aluRS232ChanGroupRowStatus object.

For each aluRS23…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluRS232ChanGroupRowStatus
aluRS232ChanGroupRowStatus controls the creation and deletion of
row entries in the aluRS232ChanGroupTable. The tmnxPortPortID
for a channel group includes a group ID in the lower bits.
The manager has to first calcula…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.6.1.1
aluRS232ChanGroupTimeSlots
aluRS232ChanGroupTimeSlots is a bitmap which is used to
represent the timeslots from a channel group.
The description for TmnxDs0ChannelList contains details of the
bitmap organization.
TIMETRA-PORT-MIBTmnxDs0ChannelList
Textual Convention: TIMETRA-PORT-MIBTmnxDs0ChannelList OctetString
Type Constraints:
range: 0..4
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.6.1.2
aluRS232ChanGroupMTU
The size of the largest packet which can be sent/received
on the channel group, specified in octets. For groups that
are used for transmitting network datagrams, this is the
size of the largest network datagram that ca…
bytesUnsigned32r/w
Constraints:
range: 578-9208
range: 0-0
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.6.1.3
aluRS232ChanGroupOperMTU
The negotiated size of the largest packet which can be sent on
the channel group, specified in octets. For channel groups that
are used for transmitting network datagrams, this is the size of
the largest network dat…
bytesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.6.1.4
aluRS232ChanGroupCRC
The value of aluRS232ChanGroupCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit
CRC calculation. A value of 'crc32' is a 32-bit CRC
calculation. 32-bit CRC increases …
Enumerationr/w
Enumerated Values:
1crc16
2crc32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.6.1.5
aluRS232ChanGroupIdleCycleFlags
aluRS232ChanGroupIdleCycleFlags configures the value that the
channel group transmits during idle cycle.
TIMETRA-PORT-MIBTmnxDSXIdleCycleFlagsr/w
Textual Convention: TIMETRA-PORT-MIBTmnxDSXIdleCycleFlags Enumeration
Type Values:
0none
1flags
2ones
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.6.1.6
aluRS232ChanGroupPayloadFillType
The value of aluRS232ChanGroupPayloadFillType specifies the type of
idle payload fill to be sent when the CEM channel group experiences
an underrun.

If the type is set to 'userDefinedPattern' then the val…
TIMETRA-PORT-MIBTmnxDSXIdleFillTyper/w
Textual Convention: TIMETRA-PORT-MIBTmnxDSXIdleFillType Enumeration
Type Values:
0notApplicable
1allOnes
2userDefinedPattern
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.6.1.7
aluRS232ChanGroupPayloadPattern
The value of aluRS232ChanGroupPayloadPattern specifies the idle
payload
fill pattern when the CEM channel group experiences an underrun and
aluRS232ChanGroupPayloadFillType is set to 'userDefinedPattern'.
…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.6.1.8

aluVoicePortTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.7 · 1 row entry · 8 columns
Open in standard view 
The aluVoicePortTable has an entry for a physical Voice port.
aluVoicePortEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1
Each row entry represents a physical Voice port on an
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the …
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluVoicePortLastChangeTime
aluVoicePortLastChangeTime contains the sysUpTime value of the most
recently modified writable variable in the aluVoicePortEntry row for
this port.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.1
aluVoicePortType
aluVoicePortType configures the interface-type of the physical port.
Enumerationr/w
Enumerated Values:
1em
2fxo
3fxs
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.2
aluVoicePortAudioWires
aluVoicePortAudioWires is used to configure the number of audio wires
for a given E&M interface.

This object is valid for em ports only.

twoWires is not allowed when any channel in the port…
Enumerationr/w
Enumerated Values:
0notApplicable
1twoWires
2fourWires
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.3
aluVoicePortTlpRx
aluVoicePortTlpRx is used to configure the receive Transmission Level
Point level for a given voice interface. The receive TLP refers to the
digital-to-analog level.

The valid aluVoicePortTlpRx range for …
tenths of decibelsAluVoicePortTlpr/w
Textual Convention: AluVoicePortTlp Integer32
Type Constraints:
range: -160..70
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.4
aluVoicePortTlpTx
aluVoicePortTlpTx is used to configure the transmit Transmission Level
Point level for a given voice interface. The transmit TLP refers to the
analog-to-digital level.

The valid aluVoicePortTlpTx range fo…
tenths of decibelsAluVoicePortTlpr/w
Textual Convention: AluVoicePortTlp Integer32
Type Constraints:
range: -160..70
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.5
aluVoicePortLineBalance
The value of the object aluVoicePortLineBalance specifies the line
balance on a given voice interface.

This object is valid for fxo and fxs ports only.

Valid values for fxo and fxs ports:
n…
Enumerationr/w
Enumerated Values:
0notApplicable
1short
2long
3nominal
4eightHundred
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.6
aluVoicePortRingGeneration
The value of the object aluVoicePortRingGeneration specifies the
frequency (in Hz) of the generated ring signal.

This object is valid for fxs ports only.
Enumerationr/w
Enumerated Values:
0notApplicable
1none
2freq16
3freq20
4freq25
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.7
aluVoicePortSignalingType
The value of the object aluVoicePortSignalingType specifies how the
signaling leads operate to establish a call.

This object is valid for fxo and fxs ports only.

privateLineAutomaticRingdow…
Enumerationr/w
Enumerated Values:
0notApplicable
1privateLineAutomaticRingdown3600
2privateLineAutomaticRingdown1511
3loopStart3600
4profileOne1511
5remoteExtension3600
6fifteenElevenSigSel137
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.8

aluVoiceTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.8 · 1 row entry · 27 columns
Open in standard view 
aluVoiceTable has an entry for each Voice channel on an IOM card
in each chassis in the system.
aluVoiceEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1
Each row entry represents a Voice channel on an IOM card
in a chassis in the system. Channel entries for
voice ports can be created and deleted via SNMP SET operations.
For each aluVoiceEntry, there will be a correspo…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluVoiceRowStatus
aluVoiceRowStatus controls the creation and deletion of
row entries in the aluVoiceTable.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiMOS encoding scheme.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.1
aluVoiceLastChangeTime
aluVoiceLastChangeTime contains the sysUpTime value of the
most recently modified writable variable in the
aluVoiceEntry row for this Voice channel.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.2
aluVoiceType
aluVoiceType indicates the channel type.
Enumeration
Enumerated Values:
1em
2fxo
3fxs
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.3
aluVoiceSignalingMode
aluVoiceSignalingMode configures the channel's signaling mode for
E&M or transmission only.

This object is valid for em channels only.

transmissionOnly is not allowed when any port in the p…
Enumerationr/w
Enumerated Values:
0notApplicable
1em
2transmissionOnly
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.4
aluVoiceLoopback
aluVoiceLoopback is used to put the port into a loopback mode.
Only internal loopbacks are supported.

'internalAnalog' (aka Loopback B) is located on the analag side of the
CODEC. 'internalDigital' (aka L…
Enumerationr/w
Enumerated Values:
1none
2internalAnalog
3internalDigital
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.5
aluVoiceFaultSignaling
aluVoiceFaultSignaling is used to configure fault signaling as idle
or seized.

The idle code is defined by aluVoiceIdleCode.
The seized code is defined by aluVoiceSeizedCode.

This object is…
Enumerationr/w
Enumerated Values:
1idle
2seized
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.6
aluVoiceSignalBitsState
aluVoiceSignalBitsState is an array of two bytes used to indicate the
current state of the ABCD signalling bits for the voice channel.

The first byte of the array describes the RX ABCD bits. The second by…
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.7
aluVoiceClockSource
aluVoiceClockSource indicates the clock for transmitted data from
either the internal clock ('nodeTimed'), or from a clock recovered
from the line's receive data stream ('loopTimed'), or recovered
adaptively from the ra…
TIMETRA-PORT-MIBTmnxDSXClockSource
Textual Convention: TIMETRA-PORT-MIBTmnxDSXClockSource Enumeration
Type Values:
1loopTimed
2nodeTimed
3adaptive
4differential
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.8
aluVoiceSignalingLeadE
aluVoiceSignalingLeadE is an output (or drive) lead.

This object is valid for em channels only.

This object is invalid for em channels whose aluVoiceSignalingMode is
'transmissionOnly'.
AluVoiceSignalingLeadr/w
Textual Convention: AluVoiceSignalingLead Enumeration
Type Values:
0notApplicable
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.9
aluVoiceSignalingLeadM
aluVoiceSignalingLeadM is an input (or scan) lead.

This object is valid for em channels only.

This object is invalid for em channels whose aluVoiceSignalingMode is
'transmissionOnly'.
AluVoiceSignalingLeadr/w
Textual Convention: AluVoiceSignalingLead Enumeration
Type Values:
0notApplicable
1high
2low
3end-to-end
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.10
aluVoiceSignalingLeadsState
aluVoiceSignalingLeadsState is an array of two bytes used to indicate
the current state of the output (or drive) and input (or scan)
signaling leads (AluVoiceSignalingLead).

This object is valid for em ch…
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.11
aluVoiceSignalMode
The value of aluVoiceSignalMode indicates the type of signalling
associated with the channel:
none - Indicates no signalling on this channel.
cas - Indicates Channel Associated Signalling (CAS) on this channel.
…
Enumeration
Enumerated Values:
1none
2cas
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.12
aluVoiceCallState
The current state of the voice circuit.
Enumeration
Enumerated Values:
0unknown
1outOfService
2idle
3incoming
4outgoing
5nonForwarding
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.13
aluVoiceIncomingCallCount
The number of incoming calls (received by the circuit).

This count is accumulated since the last time the statistics were cleared.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.14
aluVoiceIncomingCallCountAns
The number of incoming calls (received by the circuit) that were answered.

This count is accumulated since the last time the statistics were cleared.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.15
aluVoiceIncomingCallTime
The total duration (in seconds) of all incoming calls.

This count is accumulated since the last time the statistics were cleared.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.16
aluVoiceIncomingCallTimeAns
The total duration (in seconds) of all incoming calls that were answered.

This count is accumulated since the last time the statistics were cleared.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.17
aluVoiceOutgoingCallCount
The number of outgoing calls (originated by the circuit).

This count is accumulated since the last time the statistics were cleared.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.18
aluVoiceOutgoingCallCountAns
The number of outgoing calls (originated by the circuit) that were answered.

This count is accumulated since the last time the statistics were cleared.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.19
aluVoiceOutgoingCallTime
The total duration (in seconds) of all outgoing calls.

This count is accumulated since the last time the statistics were cleared.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.20
aluVoiceOutgoingCallTimeAns
The total duration (in seconds) of all outgoing calls that were answered.

This count is accumulated since the last time the statistics were cleared.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.21
aluVoiceOutOfServiceTime
The time in seconds for which the circuit was unavailable for connection.

This count is accumulated since the last time the statistics were cleared.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.22
aluVoiceIdleTime
The time in seconds for which the circuit was idle.

This count is accumulated since the last time the statistics were cleared.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.23
aluVoiceTotalCallCount
The sum of aluVoiceIncomingCallCount and aluVoiceOutgoingCallCount.

This count is accumulated since the last time the statistics were cleared.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.24
aluVoiceTotalCallTime
The sum of aluVoiceIncomingCallTime and aluVoiceOutgoingCallTime.

This count is accumulated since the last time the statistics were cleared.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.25
aluVoiceIdleCode
This object contains the code transmitted on the signaling path when
the channel is configured to transmit idle fault signaling. It's also
used for driving/scanning the E&M signaling leads.

This object is…
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.26
aluVoiceSeizedCode
This object contains the code transmitted on the signaling path when
the channel is configured to transmit seized fault signaling. It's also
used for driving/scanning the E&M signaling leads.

This object …
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.27

aluVoiceChanGroupTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.9 · 1 row entry · 3 columns
Open in standard view 
The aluVoiceChanGroupTable has an entry for a single 64kbps (DS0)
channel belonging to a particular Voice channel.
aluVoiceChanGroupEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.9.1
Each row entry represents one or more Voice channels on an interface.

Entries can be created and deleted via SNMP SET operations
using the aluVoiceChanGroupRowStatus object.

For each aluVoice…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluVoiceChanGroupRowStatus
aluVoiceChanGroupRowStatus controls the creation and deletion of
row entries in the aluVoiceChanGroupTable. The tmnxPortPortID
for a channel group includes a group ID in the lower bits.
The manager has to first calcula…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.9.1.1
aluVoiceChanGroupMTU
The size of the largest packet which can be sent/received
on the channel group, specified in octets. For groups that
are used for transmitting network datagrams, this is the
size of the largest network datagram that ca…
bytesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.9.1.2
aluVoiceChanGroupOperMTU
The negotiated size of the largest packet which can be sent on
the channel group, specified in octets. For channel groups that
are used for transmitting network datagrams, this is the size of
the largest network dat…
bytesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.9.1.3

aluGponPortTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.10 · 1 row entry · 6 columns
Open in standard view 
The aluGponPortTable has an entry for every GPON port in the system.
aluGponPortEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.10.1
Each row entry represents a physical GPON port on an
IOM card in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Entries in this
table will be created automatically when the
tmn…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluGponPortG984SerialNumber
Represents the ONT's G.984 Serial Number of the ONT. From a
display standpoint, it should be interpreted as follows: 1st 4
bytes are ASCII Vendor ID, and 2nd 4 bytes are a 32 bit number
(which gets displayed as 8 ASCII…
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.10.1.1
aluGponPortSubsLocId
The Subscriber Location ID (SLID) that is sent to the OLT via
the G.984.3 password PLOAM message. Contains the binary
representation of the 10-byte SLID that will be sent on the
next reboot.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.10.1.2
aluGponPortActiveSwVersion
The active software version running on the GPON port's ONT.
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.10.1.3
aluGponPortPonStatus
The aluGponPortPonStatus indicates the current status of the
PON.
Enumeration
Enumerated Values:
0shutdown
1active
2hardwareFailure
3softwareFailure
4lossOfLink
5softwareDownload
6omciNotEstablished
7boot
8ranging
9busy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.10.1.4
aluGponPortOntEnetStatus
Indicates the operational status of the ONT's Ethernet interface.
Enumeration
Enumerated Values:
0noLink
1active
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.10.1.5
aluGponPortOntEnetSpeed
Indicates the operational speed of the ONT's Ethernet interface.
Enumeration
Enumerated Values:
0undefined
1halfDuplex10Mbps
2fullDuplex10Mbps
3halfDuplex100Mbps
4fullDuplex100Mbps
5halfDuplex1Gbps
6fullDuplex1Gbps
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.10.1.6

aluDslPortTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.11 · 1 row entry · 17 columns
Open in standard view 
The aluDslPortTable has an entry for every DSL port in the system.
aluDslPortEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1
Each row entry represents a backplane ethernet DSL port on an
IOM card in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Entries in this
table will be created automatically whe…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluDslPortBondingType
The aluDslPortBondingType indicates the bonding type of the DSL port.
AluDslTpsTcType
Textual Convention: AluDslTpsTcType Enumeration
Type Values:
0none
2efm
4atm
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.1
aluDslPortBondingState
The aluDslPortBondingState indicates the bonding opretional state of
the DSL port. The 'up' state indicates that the bonding group can
be used for passing traffic.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.2
aluDslPortBondingBitRateUS
The aluDslPortBondingBitRateUS indicates the upstream bonding bit
rate, unit is 1Kpbs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.3
aluDslPortBondingBitRateDS
The aluDslPortBondingBitRateDS indicates the downstream bonding bit
rate, unit is 1Kpbs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.4
aluDslPortAtmVpi
The aluDslPortAtmVpi indicates the Vpi for the bonding group.
It is only used when the aluDslPortBondingType is 'atm'.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.5
aluDslPortAtmVci
aluDslPortAtmVci indicates the Vci for the bonding group.
The minimum value is 32, values 0 to 31 are
reserved for other uses by the ITU and ATM Forum.
It is only used when the aluDslPortBondingType is 'atm'.
Integer32r/w
Constraints:
range: 32-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.6
aluDslPortAtmF5OamLoopback
aluDslPortAtmF5OamLoopback is used to generate an CPE initiated F5
OAM loopback cell on an ATM bonding type DSL port .

The aluDslPortAtmF5OamLoopback always starts in the none(0) state
until an explicit …
Enumerationr/w
Enumerated Values:
0none
1active
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.7
aluDslPortAtmF5OamLoopbackStatus
aluDslPortAtmF5OamLoopbackStatus is used to indicate the F5 loopback
test result.

It is applicable only when the value of tmnxPortType is 'XDSL' and the
aluDslPortBondingType is 'atm'.
Enumeration
Enumerated Values:
0none
1fail
2pass
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.8
aluDslPortAtmF5OamLoopbackTime
aluDslPortAtmF5OamLoopbackTime is used to indicate the round-trip time
, in ms, for the ATM F5 Loopback testing.

It is applicable only when the value of tmnxPortType is 'XDSL' and the
aluDslPortBondingTyp…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.9
aluDslPortNtrDslLineID
The aluDslPortNtrDslLineID indicates the DSL physical line controlling
the NTR. The value of '0' indicates that the NTR is not available on
the port
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.10
aluDslPortNtrLockedStatus
The aluDslPortNtrLockedStatus indicates that NTR status.
Enumeration
Enumerated Values:
0acquringLock
1preLock
2lock
3notSelected
4freeRunning
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.11
aluDslPortNtrStdDev
The aluDslPortNtrStdDev indicates the standard deviation, or one
sigma, over a 10 second period of the phase error between the
encoded phase information (as present in the NTR field of
the overhead frame) and the CPE re…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.12
aluDslPortNtrMaxError
The aluDslPortNtrMaxError indicates the maximum phase error, after
lock has been declared, between the encoded phase information
(as present in the NTR field of the overhead frame) and the CPE
regenerated NTR clock. …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.13
aluDslPortNtrMinError
The aluDslPortNtrMinError indicates the minimum phase error, after
lock has been declared, between the encoded phase information
(as present in the NTR field of the overhead frame) and the CPE
regenerated NTR clock. …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.14
aluDslPortAdsl2Plus
The aluDslPortAdsl2Plus indicates the support of G992.5
Annex A operations which are specific to POTS (g992Dot5a), or
support of G992.5 ISDN operations over ADSL2+ (g992Dot5b).

It is applicable only whe…
Enumerationr/w
Enumerated Values:
0g992Dot5a
1g992Dot5b
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.15
aluDslPortNtrSampleClockPeriod
The aluDslPortNtrSampleClockPeriod indicates the sample
clock period for NTR in nanoseconds. This number multiplied by
the aluDslPortNtrErrorHistory value results in the phase error
in nanoseconds between the encoded ph…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.16
aluDslPortNtrErrorHistory
The aluDslPortNtrErrorHistory is an array of bytes used to
indicate phase error history. Each byte represents the phase
error between the encoded phase information (as present in
the NTR field of the overhead frame) and…
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.17

aluXdslLineTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.12 · 1 row entry · 24 columns
Open in standard view 
The aluXdslLineTable has an entry for every physical XDSL line in the
system.
aluXdslLineEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1
Each row entry represents a physical XDSL line on an
DSL module in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Entries in this
table will be created automatically when the
t…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID aluXdslLineID
Column Syntax OID
aluXdslLineID
When aluXdslLineID is used in conjunction with tmnxChassisIndex
and tmnxPortPortID, it uniquely identifies a specified
physical XDSL line in the managed system.
Unsigned32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.1
aluXdslLineOperState
It indicates the operational state of the XDSL line. The 'up' state
indicates that the DSL line can be used for passing traffic.

For 'ptm' TPS-TC XDSL line, the aluXdslLineOperState is up when the
line st…
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.2
aluXdslLineState
It indicates the state of the XDSL line retrieved from BCM6519.
Enumeration
Enumerated Values:
0idlNcon
1idlConf
2runActi
3runInit
4runShow
5tstMode
6runLdInit
7idlLdDone
8runShowL2
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.3
aluXdslLineProtocol
It indicates the protocol of the XDSL line retrieved from BCM6519.
Enumeration
Enumerated Values:
-1none
0proc9921a
1proc9921b
2proc9921c
3proc9922a
4proc9922c
5proc9921h
6proc9921i
7proc9932
8proc9912a
9proc9912b
16proc9923a
17proc9923b
18proc9923i
19proc9923m
20proc9923j
21proc9924i
22proc9923l1
23proc9923l2
24proc9925a
25proc9925b
26proc9925i
27proc9925m
28proc9925j
29sadsl
30ansi
31etsi
32proc9932v
33proc9935
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.4
aluXdslLineVdslProfile
It indicates the VDSL profile of the XDSL line retrieved from BCM6519.
Enumeration
Enumerated Values:
0none
1profile8a
2profile8b
3profile8c
4profile8d
5profile12a
6profile12b
7profile17a
8profile30a
9unknown
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.5
aluXdslLineTpsTcType
It indicates the TPS-TC of the XDSL line retrieved from BCM6519.
AluDslTpsTcType
Textual Convention: AluDslTpsTcType Enumeration
Type Values:
0none
2efm
4atm
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.6
aluXdslLineInBondingGroup
It indicates if the line belongs to bonding group on the DSL Port
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.7
aluXdslLineBitRateUS
It indicates the upstream line bit rate, unit is 1Kpbs.
It is retrieved from BCM6519.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.8
aluXdslLineSnrMarginUS
It indicates the upstream SNR margin (expressed in tenth of dB's).
It is retrieved from BCM6519.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.9
aluXdslLineOutputPowerUS
It indicates the upstream transmit power (expressed in tenth of dBm's).
It is retrieved from BCM6519.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.10
aluXdslLineRefPsdUS
It indicates the upstream ref psd = nomial PSD - power cutback
(expressed in tenths of dB's). It applies to ADSL ptotocols only.
It is retrieved from BCM6519.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.11
aluXdslLineLoopDelayUS
It indicates the current loop group delay, only measured in VDSL.
US: delay as measured on RMSG1 = actual loop delay
DS: delay as measured on R-P-TRAINING1 = residual after application
of timing advance expressed in…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.12
aluXdslLineFailureUS
It is bit mask giving the set of current active failure
on the upstream line. The value is retrieved from BCM6519.

A failure is declared when the corresponding defect is active for
more than 2.5 (+ or - 0…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.13
aluXdslLineB0DelayUS
It indicates the current delay incurred on the upstream B0 latency
path, expressed in milliseconds. The value is retrieved from BCM6519.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.14
aluXdslLineB0InpUS
It indicates the current INP protection achived on the upstream B0
latency path, Unit is 1/2 symbol. The value is retrieved from
BCM6519.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.15
aluXdslLineBitRateDS
It indicates the downstream line bit rate, unit is 1Kpbs.
It is retrieved from BCM6519.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.16
aluXdslLineSnrMarginDS
It indicates the downstream SNR margin (expressed in tenth of dB's).
It is retrieved from BCM6519.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.17
aluXdslLineOutputPowerDS
It indicates the downstream transmit power (expressed in tenth of
dBm's). It is retrieved from BCM6519.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.18
aluXdslLineRefPsdDS
It indicates the downstream ref psd = nomial PSD - power cutback
(expressed in tenths of dB's). It applies to ADSL ptotocols only.
It is retrieved from BCM6519.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.19
aluXdslLineLoopDelayDS
It indicates the current loop group delay, only measured in VDSL.
US: delay as measured on RMSG1 = actual loop delay
DS: delay as measured on R-P-TRAINING1 = residual after application
of timing advance expressed in…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.20
aluXdslLineFailureDS
It is bit mask giving the set of current active failure
on the downstream line. The value is retrieved from BCM6519.

A failure is declared when the corresponding defect is active for
more than 2.5 (+ or -…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.21
aluXdslLineB0DelayDS
It indicates the current delay incurred on the downstream B0 latency
path, expressed in milliseconds. The value is retrieved from BCM6519.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.22
aluXdslLineB0InpDS
It indicates the current INP protection achived on the downstream B0
latency path, Unit is 1/2 symbol. The value is retrieved from
BCM6519.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.23
aluXdslLineAdminState
It indicates the desired administrative status of this DSL Line
AluDslAdminStater/w
Textual Convention: AluDslAdminState Enumeration
Type Values:
0outOfService
1inService
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.12.1.24

aluShdslLineTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.13 · 1 row entry · 13 columns
Open in standard view 
The aluShdslLineTable has an entry for every SHDSL line in the system.
aluShdslLineEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1
Each row entry represents a physical SHDSL line on an
DSL module in a chassis in the system. Entries cannot be
created and deleted via SNMP SET operations. Entries in this
table will be created automatically when the
…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID aluShdslLineID
Column Syntax OID
aluShdslLineID
When aluShdslLineID is used in conjunction with tmnxChassisIndex and
tmnxPortPortID, it uniquely identifies a SHDSL line in the managed
system.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.1
aluShdslLineDataRate
Current data rate of the PMD in units of 1kbs
Note: This parameter is only valid if link is in UP_DATA_MODE.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.2
aluShdslLineState
Indicates the current state
Enumeration
Enumerated Values:
0downNotReady
1downReady
2stopDownReady
3initializing
4upDateMode
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.3
aluShdslLineNegotiatedConst
Indicates the Negotiated Constellation.
Note: This parameter is only valid if link is in UP_DATA_MODE.
Enumeration
Enumerated Values:
0pmd16TcPAM
1pmd32TcPAM
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.4
aluShdslLineUsedCaplist
Indicates the Negotiated Constellation.
Note: This parameter is only valid if link is in UP_DATA_MODE.
Enumeration
Enumerated Values:
0newStyleCapList
1oldStyleCapList
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.5
aluShdslLineRegion
Indicates the Region Information
Note: This parameter is only valid if link is in UP_DATA_MODE.
Enumeration
Enumerated Values:
0annexAF
1annexBG
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.6
aluShdslLineCaplistMode
Indicates the Capability List Mode.
Enumeration
Enumerated Values:
0newStyleCapList
1oldStyleCapList
2autoCapList
3autoTcDetect
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.7
aluShdslLineTpsTcType
This parameter indicates the TPS-TC of the physical SHDSL line.
AluDslTpsTcType
Textual Convention: AluDslTpsTcType Enumeration
Type Values:
0none
2efm
4atm
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.8
aluShdslLineInBondingGroup
It indicates if the line belongs to bonding group on the DSL Port
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.9
aluShdslLineAdminState
It indicates the desired administrative status of this DSL Line
AluDslAdminStater/w
Textual Convention: AluDslAdminState Enumeration
Type Values:
0outOfService
1inService
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.10
aluShdslLineLineAttenuation
Line Attenuation in dB (Network Side).
The local STU-R value is updated every second when the link is active.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.11
aluShdslLineRxSNRMargin
RX SNR Margin (Network Side). The local STU-R value is updated
every second when the link is active.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.12
aluShdslLinePowerBackOffValue
Power Back-Off Value (Network Side). The local STU-R value in dB
is updated every second when the link is active.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.13.1.13

aluDataPortTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.14 · 1 row entry · 2 columns
Open in standard view 
The aluDataPortTable has an entry for a physical Data port.
aluDataPortEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.14.1
Each row entry represents a physical Data port on an IOM card in a
chassis in the system. Entries cannot be created and deleted via SNMP
SET operations. Entries in this table will be created automatically
when the tmn…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluDataPortLastChangeTime
The value of the object aluDataPortLastChangeTime indicates the
sysUpTime of the most recently modified writable variable in the
aluDataPortEntry row for this port.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.14.1.1
aluDataPortType
The value of the object aluDataPortType specifies the interface-type of
the physical port.
Enumerationr/w
Enumerated Values:
1codir
2tpif
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.14.1.2

aluDataTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.15 · 1 row entry · 8 columns
Open in standard view 
aluDataTable has an entry for each Data channel on an IOM card
in each chassis in the system.
aluDataEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.15.1
Each row entry represents a Data channel on an IOM card
in a chassis in the system. Channel entries for
Data ports can be created and deleted via SNMP SET operations.
For each aluDataEntry, there will be a correspondi…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluDataRowStatus
aluDataRowStatus controls the creation and deletion of
row entries in the aluDataTable.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiMOS encoding scheme.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.15.1.1
aluDataLastChangeTime
The value of the object aluDataLastChangeTime indicates the sysUpTime
of the most recently modified writable variable in the aluDataEntry row
for this Data channel.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.15.1.2
aluDataType
aluDataType indicates the channel type.
Enumeration
Enumerated Values:
1codir
2tpif
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.15.1.3
aluDataClockSource
aluDataClockSource indicates the clock for transmitted data from
either the internal clock ('nodeTimed'), or from a clock recovered
from the line's receive data stream ('loopTimed'), or recovered
adaptively from the rat…
TIMETRA-PORT-MIBTmnxDSXClockSource
Textual Convention: TIMETRA-PORT-MIBTmnxDSXClockSource Enumeration
Type Values:
1loopTimed
2nodeTimed
3adaptive
4differential
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.15.1.4
aluDataTiming8k
The value of the object aluDataTiming8k specifies whether to generate
the 8k timing signal while the channel's service is NOT operational.

This object is valid for codir channels only.
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.15.1.5
aluDataReportAlarm
The value of the object aluDataReportAlarm determines when and if to
generate aluEqPortDataAlarm and aluEqPortDataAlarmClear
notifications for this channel.

Valid bits for codir ports:
ais (default)
los …
AluDataReportStatusr/w
Textual Convention: AluDataReportStatus Bits
Type Values:
0notUsed
1ais
2los
3rai
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.15.1.6
aluDataReportAlarmStatus
The value of the object aluDataReportAlarmStatus indicates the current
alarms on this channel.
AluDataReportStatus
Textual Convention: AluDataReportStatus Bits
Type Values:
0notUsed
1ais
2los
3rai
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.15.1.7
aluDataLoopback
The value of the object aluDataLoopback specifies the loopback mode of
the Data interface.

An 'internal' loopback loops frames from the local system back at the
framer.
A 'line' loopback loops fra…
Enumerationr/w
Enumerated Values:
1none
2internal
3line
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.15.1.8

aluDataChanGroupTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.16 · 1 row entry · 7 columns
Open in standard view 
The aluDataChanGroupTable has an entry for 64kbps (DS0) channels 
grouped together and belonging to a particular Data channel.
aluDataChanGroupEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.16.1
Each row entry represents one or more Data channels on an interface.

Entries can be created and deleted via SNMP SET operations
using the aluDataChanGroupRowStatus object.

For each aluDataCha…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluDataChanGroupRowStatus
aluDataChanGroupRowStatus controls the creation and deletion of
row entries in the aluDataChanGroupTable. The tmnxPortPortID
for a channel group includes a group ID in the lower bits.
The manager has to first calculate…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.16.1.1
aluDataChanGroupLastChangeTime
The aluDataChanGroupLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
aluDataChanGroupEntry row for this channel group.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.16.1.2
aluDataChanGroupMTU
The size of the largest packet which can be sent/received
on the channel group, specified in octets. For groups that
are used for transmitting network datagrams, this is the
size of the largest network datagram that ca…
bytesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.16.1.3
aluDataChanGroupOperMTU
The negotiated size of the largest packet which can be sent on
the channel group, specified in octets. For channel groups that
are used for transmitting network datagrams, this is the size of
the largest network dat…
bytesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.16.1.4
aluDataChanGroupPayloadFillType
The value of aluDataChanGroupPayloadFillType specifies the type of
idle payload fill to be sent when the CEM channel group experiences
an underrun.

This object is valid for codir channels only.
…
TIMETRA-PORT-MIBTmnxDSXIdleFillTyper/w
Textual Convention: TIMETRA-PORT-MIBTmnxDSXIdleFillType Enumeration
Type Values:
0notApplicable
1allOnes
2userDefinedPattern
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.16.1.5
aluDataChanGroupPayloadPattern
The value of aluDataChanGroupPayloadPattern specifies the idle
payload
fill pattern when the CEM channel group experiences an underrun and
aluDataChanGroupPayloadFillType is set to 'userDefinedPattern'.

…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.16.1.6
aluDataChanGroupTimeSlots
aluDataChanGroupTimeSlots is a bitmap which is used to
add/remove DS0 timeslots from a channel group.
The description for TmnxDs0ChannelList contains details of the
bitmap organization.

This object spec…
TIMETRA-PORT-MIBTmnxDs0ChannelListr/w
Textual Convention: TIMETRA-PORT-MIBTmnxDs0ChannelList OctetString
Type Constraints:
range: 0..4
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.16.1.7

aluExtTmnxDS0ChanGroupTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.17 · 1 row entry · 2 columns
Open in standard view 
The aluExtTmnxDS0ChanGroupTable has an entry for DS0 channels
grouped together and belonging to a particular DS0/E1 channel
aluExtTmnxDS0ChanGroupEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.17.1
Each row entry represents the extended functionality of a DS0 channel
group.
Entries cannot be created and deleted via SNMP SET operations.
It will be automatically created or deleted when an tmnxDS0ChanGroupEntry
is …
Indexes
No indexes recorded
Column Syntax OID
aluExtDS0ChanGroupSignalMode
The value of aluExtDS0ChanGroupSignalMode indicates the type of signalling
associated with the channel:
none - Indicates no signalling on this channel.
cas - Indicates Channel Associated Signalling (CAS) on this chan…
Enumerationr/w
Enumerated Values:
1none
2cas
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.17.1.1
aluExtDS0ChanGroupLoopback
The value of aluExtDS0ChanGroupLoopback specifies the type of loopback
applied to the DS0 channel group. The value of tmnxPortAdminStatus
should be set to 'outOfService' prior to applying loopback.

none …
Enumerationr/w
Enumerated Values:
0none
1line
2internal
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.17.1.2

aluExtPethPsePortTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.18 · 1 row entry · 4 columns
Open in standard view 
The aluExtPethPsePortTable has an entry for a table of objects 
that display and control the power characteristics of power Ethernet 
ports on a Power Source Entity (PSE) device.
aluExtPethPsePortEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.18.1
Each row entry represents the extended functionality of a power Ethernet
port
Indexes
No indexes recorded
Column Syntax OID
aluExtPethPsePortFaultReason
Reason for a detection status failure:
none (1)
dcp (2) - Positive DC supply connected at the port
hicap (3) - High Capacitance at the port
rlow (4) - Low Resistance at the port
detok (5) - detection ok
rhigh …
Enumeration
Enumerated Values:
1none
2dcp
3hicap
4rlow
5detok
6rhigh
7open
8dcn
9tstart
10icv
11tcut
12dis
13sup
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.18.1.1
aluExtPethPsePortPowerLevel
none (1) The interface does not provide the power ethernet function.
standard (2) The interface provides the standard power ethernet power level.
plus (3) The interface provides the higher power 'Poe Plus' PSE f…
Enumerationr/w
Enumerated Values:
1none
2standard
3plus
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.18.1.2
aluExtPethPsePortPowerConsumption
The power consumption of the port expressed in milliwatts.
MilliwattsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.18.1.3
aluExtPethPsePortMaximumPower
The maximum power available to the port expressed in milliwatts.
MilliwattsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.18.1.4

aluExtPortTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.19 · 1 row entry · 1 columns
Open in standard view 
The aluExtPortTable has an entry for port in the chassis.
aluExtTmnxPortEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.19.1
Each row entry represents extended functionality of a port on
Nokia 7705 SAR devices. Entries cannot be created or
deleted via SNMP SET operations. Entries in this table will be
created or deleted automatically when en…
Indexes
No indexes recorded
Column Syntax OID
aluExtPortSsmTxQualityLevel
aluExtPortSsmTxQualityLevel indicates the SSM quality level
of transmitted SSM messages. On ports not supporting SSM, or not
transmitting SSM messages, the quality level will be 'unknown (0)'.

The values …
Enumeration
Enumerated Values:
0unknown
1prs
2stu
3st2
4tnc
5st3e
6st3
7smc
8st4
9dus
10prc
11ssua
12ssub
13sec
14dnu
15inv
16pno
17eec1
18eec2
19failed
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.19.1.1

aluScadaBridgeTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.20 · 1 row entry · 5 columns
Open in standard view 
The aluScadaBridgeTable has an entry for a Scada Bridge.
aluScadaBridgeEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.20.1
Each row entry represents a Scada bridge
in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tmnxMDAAssignedType object is
set to…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluScadaBridgeType
The value of the object aluScadaBridgeType indicates the type of the
scada bridge.

Due to FPGA limitations, all scada bridges on a SCADA card must
be the same type. The type is determined by the mda mode,…
Enumeration
Enumerated Values:
1mddb
2pcm
3vcb
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.20.1.1
aluScadaBridgeAdminStatus
aluScadaBridgeAdminStatus indicates the admin status of the scada bridge
Enumerationr/w
Enumerated Values:
0outOfService
1inService
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.20.1.2
aluScadaBridgeOperStatus
aluScadaBridgeOperStatus indicates the operational status of the scada bridge
Enumeration
Enumerated Values:
0outOfService
1inService
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.20.1.3
aluScadaBridgeDescription
A textual string containing user supplied information about the
scada bridge.
TIMETRA-TC-MIBTItemLongDescriptionr/w
Textual Convention: TIMETRA-TC-MIBTItemLongDescription OctetString
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.20.1.4
aluScadaBridgeName
The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in commands
entered at the device's `console'. This might …
TIMETRA-TC-MIBTNamedItemOrEmpty
Textual Convention: TIMETRA-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.20.1.5

aluSerialMddbTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.21 · 1 row entry · 10 columns
Open in standard view 
aluSerialMddbTable has an entry for each Serial
MDDB port on each IOM card in each chassis in the system.
aluSerialMddbEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1
Each row entry represents a Serial MDDB in the system. Entries for
serial mddbs can not be created and deleted via SNMP SET operations.
The Entries are automatically created when the tmnxMDAAssignedType object is
set t…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluSerialMddbReportAlarms
The value of aluSerialMddbReportAlarms determines if the
the following alarms for branches belong to the Mddb should be monitored.

hcmOof - Reports local HCM out-of-frame errors.
hcmRai - Reports remote …
AluRS232ReportStatusr/w
Textual Convention: AluRS232ReportStatus Bits
Type Values:
0notUsed
1hcmOof
2hcmRai
3ctrlLeadMon
4monClockDev
5monDataInac
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.1
aluSerialMddbForceActive
aluSerialMddbForceActive forces the specified master branch to be
active. default is the master branch 1.
Not configurable in when aluSerialMddbRedMode is auto
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.2
aluSerialMddbSquelchStatus
aluSerialMddbSquelchStatus shows squelch status of the scada bridge. It is a 32-bit integer and
each bit represent a branch. Bit with value one indicates that the associated branch is squelched.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.3
aluSerialMddbSquelchEnable
During nomal SCADA system operation, it is common for a single slave to lock-up
and continue to send data after the allocated response time. To solve the problem,
the bridge has a squelching function which will over-ri…
Enumerationr/w
Enumerated Values:
1false
2true
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.4
aluSerialMddbSquelchTimeout
The bridge will start squelching after a user-selectable time period.

aluSerialMddbSquelchTimeout specifies such a period in seconds. It can only be set to value larger than
zero. Value zero is an undefin…
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.5
aluSerialMddbSquelchReset
aluSerialMddbSquelchReset is a one shot action used to reset the squelching.
Enumerationr/w
Enumerated Values:
1noAction
2action
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.6
aluSerialMddbSpeed
aluSerialMddbSpeed specifies the speed of the Mddb.
A value of 'speed1200' sets the bridge to 1200bps. These
speed definitions are consistent with those used for RS232 port.

The speed of the bridge shou…
Enumerationr/w
Enumerated Values:
1speed1200
2speed2400
3speed9600
4speed19200
5speed38400
6speed56000
23speed4800
24speed600
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.7
aluSerialMddbSquelchResetMode
aluSerialMddbResetMode specifies the method of re-enabling squelched branch.
In manual mode, squelched branches can be only re-enabled when user sets aluSerialMddbSquelchReset.
In auto mode, squelched branches will be …
Enumerationr/w
Enumerated Values:
1manual
2auto
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.8
aluSerialMddbSquelchResetTimeout
aluSerialMddbResetTimeout specifies how long the squelched branches have to be remain squelched,
after the squelch condition is cleared and before it can be re-enabled.
It is only meaningful when aluSerialMddbResetMod…
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.9
aluSerialMddbRedMode
aluSerialMddbRedMode specifies the redundant mode of the bridge.
In auto mode, both master branches are active; one could be for voice and another one for data.
In manual mode, only one master branch can be active; User…
Enumerationr/w
Enumerated Values:
1manual
2auto
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.10

aluScadaBranchTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.22 · 1 row entry · 13 columns
Open in standard view 
The aluScadaBranchTable has an entry for each branch
belonging to a particular scada bridge.
aluScadaBranchEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1
Each row entry represents one branch on the bridge.

Entries can be created and deleted via SNMP SET operations
using the aluScadaBranchRowStatus object.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluScadaBranchRowStatus
aluScadaBranchRowStatus controls the creation and deletion of
row entries in the aluScadaBranchTable. The tmnxPortPortID
The port ID contains the slot, mda, bridge id and branch id
encoded into it.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.1
aluScadaBranchAdminStatus
aluScadaBranchAdminStatus indicates the admin status of the scada branch.
Enumerationr/w
Enumerated Values:
0outOfService
1inService
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.2
aluScadaBranchOperStatus
aluScadaBranchOperStatus indicates the operational status of the scada branch
Enumeration
Enumerated Values:
0outOfService
1inService
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.3
aluScadaBranchMultiDrop
aluScadaBranchMultiDrop is used to specify the Multi-drop Data Bridge
(Mddb) mode of the branch. Branch 1-2 are fixed to Master, and 3-32
are fixed to Slaves.

This object is not applicable while aluExtTmn…
Enumeration
Enumerated Values:
1slave
2master
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.4
aluScadaBranchAlarmStatus
The value of aluScadaBranchAlarmStatus indicates the alarms on this
scada branch.

This object is not applicable while aluExtTmnxMDACapabilityMode is
'modeC' (ie. VCB).
AluRS232ReportStatus
Textual Convention: AluRS232ReportStatus Bits
Type Values:
0notUsed
1hcmOof
2hcmRai
3ctrlLeadMon
4monClockDev
5monDataInac
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.5
aluScadaBranchDescription
A textual string containing user supplied information about the
scada bridge branch.
TIMETRA-TC-MIBTItemLongDescriptionr/w
Textual Convention: TIMETRA-TC-MIBTItemLongDescription OctetString
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.6
aluScadaBranchEncapType
The type of encapsulation protocol configured on this branch. It
scada bridge branch.
Enumeration
Enumerated Values:
0unknown
1nullEncap
2qEncap
3mplsEncap
4bcpNullEncap
5bcpDot1qEncap
6ipcpEncap
7frEncap
8pppAutoEncap
9atmEncap
10qinqEncap
11wanMirrorEncap
12ciscoHDLCEncap
13cemEncap
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.7
aluScadaBranchMode
The aluScadaBranchMode indicates if the branch is configured as a service access or a network access.
Enumeration
Enumerated Values:
0undefined
1access
2network
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.8
aluScadaBranchSquelch
The aluScadaBranchSquelch indicates if the branch is enabled for
squelch. If enabled, the bridge-level squelch needs to be enabled as
well to take effect; default value is enabled for slaves and disabled
for masters to …
Enumerationr/w
Enumerated Values:
0undefined
1disabled
2enabled
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.9
aluScadaBranchGainInput
The value of the object aluScadaBranchGainInput specifies the input
gain for a given branch.

This object is valid only while aluExtTmnxMDACapabilityMode is
'modeC' (ie. VCB).

Although the u…
tenths of decibelsInteger32r/w
Constraints:
range: -160-90
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.10
aluScadaBranchGainOutput
The value of the object aluScadaBranchGainOutput specifies the output
gain for a given branch.

This object is valid only while aluExtTmnxMDACapabilityMode is
'modeC' (ie. VCB).

Although the…
tenths of decibelsInteger32r/w
Constraints:
range: -160-90
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.11
aluScadaBranchGainSidetoneEnable
The value of the object aluScadaBranchGainSidetoneEnable specifies
whether sidetone gain is to be applied for a given branch.

This object is valid only while aluExtTmnxMDAVcbApplication is 'vcb'.
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.12
aluScadaBranchName
The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in commands
entered at the device's `console'. This might …
TIMETRA-TC-MIBTNamedItemOrEmpty
Textual Convention: TIMETRA-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.22.1.13

aluPortCfmLbVlanTable

table obsolete
.1.3.6.1.4.1.6527.6.1.2.2.2.4.23 · 1 row entry · 2 columns
Open in standard view 
The aluPortCfmLbVlanTable has an entry for a vlan Id of the port that must have
aluExtPortEtherLoopbackCfmLbMode set to priority-dot1p.
aluPortCfmLbVlanEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.23.1
Each row entry represents an acceptable vlan ID in the tag of incoming CFM LB frames
destined to the ethernet port with tmnxPortPortID.

Entries can be created and deleted via SNMP SET operations using the …
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID aluPortCfmLbVlanId
Column Syntax OID
aluPortCfmLbVlanId obsolete
aluPortCfmLbVlanId indicates the vlan ID of the ethernet port.
Unsigned32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.23.1.1
aluPortCfmLbVlanRowStatus obsolete
The value of aluPortCfmLbVlanRowStatus specifies the status of this row.

The only values supported during a set operation are 'createAndGo' and 'destroy'.

'createAndGo' can only be applied…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.23.1.2

aluGnssPortTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.24 · 1 row entry · 16 columns
Open in standard view 
The aluGnssPortTable has an entry for a physical GNSS port.
aluGnssPortEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1
Each row entry represents a physical GNSS port on an IOM card in a
chassis in the system. Entries cannot be created and deleted via SNMP
SET operations. Entries in this table will be created automatically
when the tmn…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluGnssPortLastChangeTime
The value of aluGnssPortLastChangeTime indicates the sysUpTime at
the time of the last modification of this entry.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.1
aluGnssPortType
The value of the object aluGnssPortType specifies which constellation
types the installed GNSS receiver module shall process.
Bitsr/w
Enumerated Values:
0gps
1glonass
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.2
aluGnssPortAntennaCableDelay
The value of the object aluGnssPortAntennaCableDelay specifies the
antenna cable delay that has to be taken into account given the
characteristics (eg. length) of the installed antenna cable.
1 nsInteger32r/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.3
aluGnssPortElevationMaskAngle
The value of the object aluGnssPortElevationMaskAngle specifies the
the elevation mask angle. It provides a method of
filtering satellites to be used by the system.

Elevation angle is the angle above the …
1 degreeInteger32r/w
Constraints:
range: 0-89
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.4
aluGnssPortVisibleSatelliteCount
The value of the object aluGnssPortVisibleSatelliteCount indicates the
number of satellites currently 'seen' by the GNSS receiver module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.5
aluGnssPortUsedSatelliteCount
The value of the object aluGnssPortUsedSatelliteCount indicates the
number of satellites currently 'used' in computations by the GNSS
receiver module.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.6
aluGnssPortAntennaStatus
The value of the object aluGnssPortAntennaStatus indicates the status
of the antenna.
Enumeration
Enumerated Values:
1unknown
2unsupported
3ok
4overCurrent
5underCurrent
6noBiasVoltage
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.7
aluGnssPortSyncStatus
The value of the object aluGnssPortSyncStatus indicates the status
of the GNSS receiver module with respect to generating a sync-worthy
clock signal.
Enumeration
Enumerated Values:
1unknown
2locked
3notLocked
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.8
aluGnssPortPositionLatitude
The value of the object aluGnssPortPositionLatitude indicates the
latitude of the antenna.

Encoding:
< 0: west of prime meridian
= 0: at prime meridian
> 0: east of prime meridian
The unit corres…
0.00001 decimal degreesInteger32
Constraints:
range: -9000000-9000000
range: 134217727-134217727
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.9
aluGnssPortPositionLongitude
The value of the object aluGnssPortPositionLongitude indicates the
longitude of the antenna.

Encoding:
< 0: south of equator
= 0: at equator
> 0: north of equator
The unit corresponds to a resolu…
0.00001 decimal degreesInteger32
Constraints:
range: 134217727-134217727
range: -18000000-18000000
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.10
aluGnssPortPositionAltitude
The value of the object aluGnssPortPositionAltitude indicates the
altitude of the antenna.

Encoding:
< 0: below sea level
= 0: at sea level
> 0: above sea level

The default value i…
1 metreInteger32
Constraints:
range: 134217727-134217727
range: -1000-10000
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.11
aluGnssPortDateAndTime
The value of the object aluGnssPortDateAndTime indicates the current
date and time as provided by the receiver module.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.12
aluGnssPortReceiverStatus
The value of the object aluGnssPortReceiverStatus indicates the
status of the GNSS receiver module.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.13
aluGnssPortCurUtcOffset
The value of the object aluGnssPortCurUtcOffset indicates the
current offset between GPS time and UTC in seconds, as provided by the
GNSS receiver module.

The value can be valid or invalid. See aluGnssPor…
Integer32
Constraints:
range: -65536-65535
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.14
aluGnssPortCurUtcOffsetValid
The value of the object aluGnssPortCurUtcOffsetValid indicates
'true (1)' if the aluGnssPortCurUtcOffset is known to be correct.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.15
aluGnssPortReceiverFwVersion
The value of the object aluGnssPortReceiverFwVersion indicates
the firmware version of the GNSS receiver module.

The format of the value may differ between receiver modules. For
example, one may return 2.…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.16

aluPcmTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.25 · 1 row entry · 8 columns
Open in standard view 
aluPcmTable has an entry for each 
PCM bridge on each IOM card in each chassis in the system.
aluPcmEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.25.1
Each row entry represents a PCM bridge in the system. Entries for
serial pcms can not be created and deleted via SNMP SET operations.
The Entries are automatically created when the tmnxMDAAssignedType object is
set to…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluPcmForceActive
aluPcmForceActive forces the specified master branch to be
active. default is the master branch 1.
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.25.1.1
aluPcmSquelchStatus
aluPcmSquelchStatus shows squelch status of the scada bridge. It is a 32-bit integer and
each bit represent a branch. Bit with value one indicates that the associated branch is squelched.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.25.1.2
aluPcmSquelchEnable
During nomal SCADA system operation, it is common for a single slave to lock-up
and continue to send data after the allocated response time. To solve the problem,
the bridge has a squelching function which will over-ri…
Enumerationr/w
Enumerated Values:
1false
2true
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.25.1.3
aluPcmSquelchTimeout
The bridge will start squelching after a user-selectable time period.
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.25.1.4
aluPcmSquelchReset
aluPcmSquelchReset is a one shot action used to reset the squelching.
Enumerationr/w
Enumerated Values:
1noAction
2action
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.25.1.5
aluPcmSquelchResetMode
aluPcmResetMode specifies the method of re-enabling squelched branch.
In manual mode, squelched branches will be re-enabled only when user sets aluPcmSquelchReset.
In auto mode, squelched branches will be re-enabled aft…
Enumerationr/w
Enumerated Values:
1manual
2auto
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.25.1.6
aluPcmSquelchResetTimeout
aluPcmResetTimeout specifies how long the squelched branches have to be remain squelched,
after the squelch condition is cleared and before it can be re-enabled.
It is only meaningful when aluPcmResetMode is auto.
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.25.1.7
aluPcmRedMode
aluPcmRedMode specifies the redundant mode of the bridge.
In auto mode, both master branches are active; one could be for voice and another one for data.
In manual mode, only one master branch can be active; User can us…
Enumerationr/w
Enumerated Values:
1manual
2auto
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.25.1.8

aluPortCemStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.26 · 1 row entry · 2 columns
Open in standard view 
A table that contains SAR specific CEM Port statistics.
aluPortCemStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.26.1
Each row entry contains 7705 SAR specific cem stats.
Indexes
No indexes recorded
Column Syntax OID
aluPortCemStatsEgressSamplingDoneCnt
The value of aluPortCemStatsEgressSamplingDoneCnt indicates
the number of times the sampling is done for asymetric delay
control.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.26.1.1
aluPortCemStatsEgressAdjustDoneCnt
The value of aluPortCemStatsEgressAdjustDoneCnt indicates
the number of times the adjustment is done for asymetric delay
control.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.26.1.2

aluRS232SocketTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.27 · 1 row entry · 10 columns
Open in standard view 
The aluRS232SocketTable has an entry for a Socket entity belonging
to a particular Serial channel.
aluRS232SocketEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1
Each row entry represents a Socket on a particular interface.

Entries can be created and deleted via SNMP SET operations
using the aluRS232SocketRowStatus object.

For each aluRS232SocketEntry…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluRS232SocketRowStatus
aluRS232SocketRowStatus controls the creation and deletion of row
entries in the aluRS232SocketTable.

The tmnxPortPortID for a Socket includes a socket ID in the lower bits.
The manager has to first calcu…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.1
aluRS232SocketLastChangeTime
The value of aluRS232SocketLastChangeTime indicates the time, since
system startup, that the configuration of this Socket was created or
modified.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.2
aluRS232SocketEopLength
The value of the object aluRS232SocketEopLength specifies the
maximum number of bytes (characters) that may be received from the
Serial data stream.

If and when reached, EOP (end of packet) is assumed and…
bytesUnsigned32r/w
Constraints:
range: 1-1500
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.3
aluRS232SocketEopIdleTimeout
The value of the object aluRS232SocketEopIdleTimeout specifies the
maximum period of idle time that may elapse since the last received
character from the Serial data stream.

If and when reached, EOP (end …
millisecondsUnsigned32r/w
Constraints:
range: 10-5000
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.4
aluRS232SocketEopSpecialChar
The value of the object aluRS232SocketEopSpecialChar specifies the
numerical value for the character, considered special, that may be
received from the Serial data stream.

If and when received, EOP (end o…
Unsigned32r/w
Constraints:
range: 0-255
range: 4294967295-4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.5
aluRS232SocketSquelchDelay
The value of the object aluRS232SocketSquelchDelay specifies the
period of time that a continuous data stream is allowed to be received
before squelch is applied. When squelch is applied, the system
suppresses the chann…
secondsUnsigned32r/w
Constraints:
range: 4294967295-4294967295
range: 1-120
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.6
aluRS232SocketUnsquelchDelay
The value of the object aluRS232SocketUnsquelchDelay specifies the
period of time that squelch will persist before it gets cleared
automatically.

The value 0xFFFFFFFF means disabled (ie. squelch will not …
secondsUnsigned32r/w
Constraints:
range: 4294967295-4294967295
range: 1-120
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.7
aluRS232SocketInterSessionDelay
The value of the object aluRS232SocketInterSessionDelay specifies the
nominal period of time to idle between transmitting the last bit of
the current session and transmitting the first bit of the next
session.
millisecondsUnsigned32r/w
Constraints:
range: 0-5000
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.8
aluRS232SocketSquelchStatus
The value of the object aluRS232SocketSquelchStatus indicates the
squelch status.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.9
aluRS232SocketSquelchReset
The value of the object aluRS232SocketSquelchReset specifies that a
manual reset of squelch is to be triggered.

Setting this object to the value of 'doAction' triggers the one-shot
reset operation. Any co…
TIMETRA-TC-MIBTmnxActionTyper/w
Textual Convention: TIMETRA-TC-MIBTmnxActionType Enumeration
Type Values:
1doAction
2notApplicable
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.27.1.10

aluDot1xAuthConfigTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.28 · 1 row entry · 2 columns
Open in standard view 
A table that contains dot1x PAE port information in the
system.
aluDot1xAuthConfigEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.28.1
A row-entry that contains port specific dot1x PAE
information.
Indexes
IEEE8021-PAE-MIBdot1xPaePortNumber
Column Syntax OID
aluDot1xAuthMacAuthEnabled
The value of aluDot1xAuthMacAuthEnabled specifies whether
a dot1x enabled ethernet port can aithenticate itself
using MAC based authentication methods. MAC based
authentication will only occur if no EAP frames are
reci…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.28.1.1
aluDot1xAuthMacAuthWait
The value of the object aluDot1xAuthMacAuthWait specifies the
period of time that no EAP packets must be recieved in order start
MAC Based Authentication on the port.

aluDot1xAuthMacAuthEnabled must be s…
secondsUnsigned32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.28.1.2

aluDot1xAuthStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.29 · 1 row entry · 2 columns
Open in standard view 
A table that contains dot1x PAE port information in the
system.
aluDot1xAuthStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.29.1
A row-entry that contains port specific dot1x PAE
information.
Indexes
IEEE8021-PAE-MIBdot1xPaePortNumber
Column Syntax OID
aluDot1xAuthLastAuthMethod
The value of aluDot1xAuthLastAuthMethod indicates
the last authentication method of the port.
(0) - Never authenticated
(1) - EAP - DOT1x EAPOL Frames
(2) - Source MAC Based Authentication
Enumeration
Enumerated Values:
0none
1eap
2mac
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.29.1.1
aluDot1xAuthMacAuthFramesRx
The value of the object aluDot1xAuthMacAuthFramesRx specifies the
the number of ethernet frames recieved to perform MAC Authentication
on.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.29.1.2

aluScadaVcbTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.30 · 1 row entry · 3 columns
Open in standard view 
The aluScadaVcbTable has an entry for each SCADA bridge,
aluScadaBridgeEntry.
aluScadaVcbEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.30.1
Each row entry represents a Voice Conference Bridge (VCB) in the
system.

Entries cannot be created and deleted via SNMP SET operations. They
are created automatically for SCADA MDAs, such as the ISC, when t…
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluScadaVcbIdleCode
The value of the object aluScadaVcbIdleCode specifies the signaling
code transmitted on all branches of the bridge indicating idle. It
is also used to interpret received signaling codes from the branches.
…
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.30.1.1
aluScadaVcbSeizedCode
The value of the object aluScadaVcbSeizedCode specifies the signaling
code transmitted on all branches of the bridge indicating seized. It
is also used to interpret received signaling codes from the branches.
…
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.30.1.2
aluScadaVcbSignalMode
The value of aluScadaVcbSignalMode indicates the type of signalling
associated with the bridge (aka channel):
none - Indicates no signalling on this channel
cas - Indicates Channel Associated Signalling (CAS) on this…
Enumeration
Enumerated Values:
1none
2cas
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.30.1.3

aluExtPortEtherBnChangeTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.4.31 · 1 row entry · 7 columns
Open in standard view 
Defines the Nokia SAR series ethernet port Bandwidch Notification change 
table for providing, via SNMP, the capability of retrieving the changes
resulted from the processing of incoming Eth-BN.
aluExtPortEtherBnChangeEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.4.31.1
Defines an entry in aluExtPortEtherBnChangeTable. Entries are
created and deleted by the system depending port configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluExtPortEtherBnEgressRateInUse
When aluExtPortEtherBnAllowed is 'true', the value of aluExtPortEtherBnEgressRateInUse indicates the
egress rate currently being enforced.

aluExtPortEtherBnEgressRateInUse is set to the default value of '…
kilo-bits per secondSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.31.1.1
aluExtPortEtherBnLastRateChangeTime
aluExtPortEtherBnLastRateChangeTime contains the sysUpTime value as time stamp
of the most recently modified aluExtPortEtherBnEgressRateInUse of this port.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.31.1.2
aluExtPortEtherBnLastMgsRxTime
aluExtPortEtherBnLastMgsRxTime contains the sysUpTime value as time stamp
of the most recently received valid Y.1731 ETH-BNM frame at this port.
This frame may or may not cause the change of aluExtPortEtherBnLastRateCha…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.31.1.3
aluExtPortEtherBnNumRateChanges
aluExtPortEtherBnNumRateChanges is the number of times the Y.1731 ETH-BNM has changed
the egress rate aluExtPortEtherBnEgressRateInUse at this port while
aluExtPortEtherBnAllowed was set to 'true'.

aluExt…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.31.1.4
aluExtPortEtherBnNumMsgRx
aluExtPortEtherBnNumMsgRx has the number of valid Y.1731 ETH-BNM received at this port since
aluExtPortEtherBnAllowed was set to 'true'.

aluExtPortEtherBnNumMsgRx is reset to 0 when aluExtPortEtherBnAllow…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.31.1.5
aluExtPortEtherBnNumInvalidMsgRx
aluExtPortEtherBnNumInvalidMsgRx has the number of invvalid Y.1731 ETH-BNM received and dropped
at this port since aluExtPortEtherBnAllowed was set to 'true'.

aluExtPortEtherBnNumInvalidMsgRx is reset to …
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.31.1.6
aluExtPortEtherBnNumBWOutOfRange
aluExtPortEtherBnNumBWOutOfRange has the number of Y.1731 ETH-BNM received with bandwidth requested
being bigger than the maximum bandwidth supported by the port, as well as those frames with bandwidth
requested being s…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.4.31.1.7

aluPortDiscardStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.1 · 1 row entry · 16 columns
Open in standard view 
Defines the Nokia SAR series port packet discard 
statistics table for providing, via SNMP, the capability of
retrieving the detailed packet discard statistics.
aluPortDiscardsStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1
Defines an entry in aluPortDiscardStatsTable. Entries are
created and deleted by the system depending port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluPortInL2AddrProtoDiscards
aluPortInL2AddrProtoDiscards indicates the number of packets discarded
that contained an unsupported type/protocol or unknown address at
layer 2.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.1
aluPortInMPLSLabelDiscards
aluPortInMPLSLabelDiscards indicates the number of packets discarded that
contained unknown mpls outer tunnels, unknown inner label or more than
two unsupported labels.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.2
aluPortInIPAddrProtoDiscards
aluPortInIPAddrProtoDiscards indicates the number of packets discarded
that contained an invalid IP address or unsupported IP protocol.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.3
aluPortInVlanIdDiscards
aluPortInVlanIdDiscards indicates the number of packets discarded
that contained an unknown VLAN Id.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.4
aluPortInHdlcCrcDiscards
aluPortInHdlcCrcDiscards indicates the number of packets discarded
due to the HDLC frame containing a CRC error.

This statistic is only applicable to interfaces that have an
encapsulation type of PPP-AU…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.5
aluPortOutPortMtuDiscards
aluPortOutPortMtuDiscards indicates the number of packets discarded
at egress due to the packet exceeding the configured port mtu.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.6
aluPortInCsmQHiPriDiscards
aluPortInCsmQHiPriDiscards indicates the number of packets discarded
in the Ingress CSM High Priority Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.7
aluPortInCsmQLowPriDiscards
aluPortInCsmQLowPriDiscards indicates the number of packets discarded
in the Ingress CSM Low Priority Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.8
aluPortInCsmQFtpPriDiscards obsolete
aluPortInCsmQFtpPriDiscards indicates the number of packets discarded
in the Ingress CSM Ftp Priority Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.9
aluPortOutCsmQDiscards
aluPortOutCsmQDiscards indicates the number of packets discarded
in the Egress CSM Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.10
aluPortInOtherDiscards
aluPortInOtherDiscards indicates the number of packets discarded
at ingress for other reasons during processing.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.11
aluPortOutOtherDiscards
aluPortOutOtherDiscards indicates the number of packets discarded
at egress for other reasons during processing.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.12
aluPortInCsmQMediumPriDiscards
aluPortInCsmQMediumPriDiscards indicates the number of packets discarded
in the Ingress CSM Medium Priority Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.13
aluPortInHardPolicerDiscards
aluPortInHardPolicerDiscards indicates the number of packets discarded
by the ingress hard policer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.14
aluPortInL2MacDADiscards
aluPortInL2MacDADiscards indicates the number of packets discarded
that contained an unknown Mac DA.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.15
aluPortInL2ETypeDiscards
aluPortInL2MacDADiscards indicates the number of packets discarded
that contained an unknown Ethertype.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.1.1.16

aluPortAcrClkStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.2 · 1 row entry · 12 columns
Open in standard view 
Defines the Nokia SAR series port adaptive clock
recovery (ACR) statistics table for providing, via SNMP, the 
capability of retrieving statistical information relating
to clock that is derived from the ACR CPIPE PW.
aluPortAcrClkStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1
Defines an entry in aluPortAcrClkStatsTable. Entries are
created and deleted by the system depending port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluLastUpdateTime
The last time the ACR statistics were updated
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.1
aluTotalMinutesIn24Hour
The number of minutes in alu24HourFreqOffsetMeanPpb
and alu24HourFreqOffsetStdDevPpb
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.2
aluCurrent24HourFreqOffsetMeanPpb
aluCurrent24HourFreqOffsetMeanPpb indicates the mean frequency offset
from the local oscillator clock in parts per billion for up to the
last 24 hour.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.3
aluCurrent24HourFreqOffsetStdDevPpb
aluCurrent24HourFreqOffsetStdDevPpb indicates the standard deviation of the
frequency offset from the local oscillator clock in parts per billion
for up to the last 24 hour.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.4
aluMaxShortIntervalMinutes
aluMaxShortIntervalMinutes the maximum number of aluIntervalNumber.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.5
aluTotalShortIntervalMinutes
aluTotalShortIntervalMinutes is the number of aluIntervalNumber
that have valid statistics
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.6
aluCurrent1MinValidData
This variable indicates if the data for the first
interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.7
aluCurrent1MinPhaseErrorMeanPpb
The mean phase error from the local oscillator clock
in parts per billion during the first interval.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.8
aluCurrent1MinPhaseErrorStdDevNs
The standard deviation of the phase error from the local
oscillator clock in nano seconds during the first interval.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.9
aluCurrent1MinPhaseErrorMeanNs
The mean of the phase error from the local
oscillator clock in nano seconds during the first interval.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.10
aluCurrent1MinFreqOffsetMeanPpb
The mean frequency offset from the local oscillator clock
in parts per billion during the first interval.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.11
aluCurrent1MinFreqOffsetStdDevPpb
The standard deviation of the frequency offset from the
local oscillator clock in nano seconds during the first interval.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.2.1.12

aluPortAcrClkStatsShortIntervalTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.3 · 1 row entry · 8 columns
Open in standard view 
The Port ACR Clock Interval Table contains various
statistics collected by each adaptively timed port
over the previous 15 minutes. The past 15 minutes are
broken into 15 1 minute intervals.  Each 
row in this table represents one such interval 
(identified by aluAcrClkIntervalNumber).
aluPortAcrClkStatsShortIntervalEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.3.1
An entry in the Port ACR Clock Interval table.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID aluIntervalNumber
Column Syntax OID
aluIntervalNumber
A number between 1 and 15, where 1 is the most
recently completed 1 minute interval and 15 is
the 1 minutes interval completed 14 minutes prior
to interval 1.
Integer32
Constraints:
range: 1-15
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.3.1.1
aluIntervalValidData
This variable indicates if the data for this
interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.3.1.2
aluIntervalUpdateTime
The update time of the ACR interval statistics
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.3.1.3
aluIntervalPhaseErrorMeanPpb
The mean phase error from the local oscillator clock
in parts per billion during the interval.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.3.1.4
aluIntervalPhaseErrorStdDevNs
The standard deviation of the phase error from the local
oscillator clock in nano seconds during the interval.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.3.1.5
aluIntervalPhaseErrorMeanNs
The mean of the phase error from the local
oscillator clock in nano seconds during the interval.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.3.1.6
aluIntervalFreqOffsetMeanPpb
The mean frequency offset from the local oscillator clock
in parts per billion during the interval.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.3.1.7
aluIntervalFreqOffsetStdDevPpb
The standard deviation of the frequency offset from the
local oscillator clock in nano seconds during the interval.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.3.1.8

aluPortNetIngressControlStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.4 · 1 row entry · 4 columns
Open in standard view 
Defines the Nokia SAR series port ingress control statistics 
table for providing, via SNMP, the capability of retrieving the ingress 
control traffic statistics for ports in network or hybrid modes.
This table is not applicable to ports in access mode.
aluPortNetIngressControlStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.4.1
Defines an entry in aluPortNetIngressControlStatsTable. Entries are
created and deleted by the system depending port configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluPortNetIngressControlFwdPkts
aluPortNetIngressControlFwdPkts indicates the number of
ingress control packets forwarded on this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.4.1.1
aluPortNetIngressControlFwdOcts
aluPortNetIngressControlFwdOcts indicates the number of
ingress control octets forwarded on this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.4.1.2
aluPortNetIngressControlDroPkts
aluPortNetIngressControlDroPkts indicates the number of
ingress control packets dropped on this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.4.1.3
aluPortNetIngressControlDroOcts
aluPortNetIngressControlDroOcts indicates the number of
ingress control octets dropped on this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.4.1.4

aluPortNetEgressControlStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.5 · 1 row entry · 4 columns
Open in standard view 
Defines the Nokia SAR series port egress control statistics
table for providing, via SNMP, the capability of retrieving the egress
control traffic statistics for ports in network or hybrid modes.
aluPortNetEgressControlStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.5.1
Defines an entry in aluPortNetEgressControlStatsTable. Entries are
created and deleted by the system depending port configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluPortNetEgressControlFwdPkts
aluPortNetEgressControlFwdPkts indicates the number of
egress control packets forwarded on this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.5.1.1
aluPortNetEgressControlFwdOcts
aluPortNetEgressControlFwdOcts indicates the number of
egress control octets forwarded on this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.5.1.2
aluPortNetEgressControlDroPkts
aluPortNetEgressControlDroPkts indicates the number of
egress control packets dropped on this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.5.1.3
aluPortNetEgressControlDroOcts
aluPortNetEgressControlDroOcts indicates the number of
egress control octets dropped on this port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.5.1.4

aluGponPortCurrentTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.6 · 1 row entry · 31 columns
Open in standard view 
The aluGponPortCurrentTable contains various
statistics being collected from the ONT for the current 15
minute interval.
aluGponPortCurrentEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1
Defines an entry in aluGponPortCurrentTable. Entries
are created and deleted by the system depending on port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluGponPortCurrentLastUpdTime
The last time at which this data was collected.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.1
aluGponPortCurrentPMEnabled
Indicates whether or not PM Collection has been enabled on the ONT.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.2
aluGponPortCurrentTxFrames
A count of Transmitted Ethernet Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.3
aluGponPortCurrentRxFrames
A count of Received Ethernet Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.4
aluGponPortCurrentTxBytes
A count of Transmitted Ethernet Bytes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.5
aluGponPortCurrentRxBytes
A count of Received Ethernet Bytes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.6
aluGponPortCurrentDropFrsUp
A count of Dropped Frames Upstream.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.7
aluGponPortCurrentDropFrsDn
A count of Dropped Frames Downstream.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.8
aluGponPortCurrentTxFrsMcast
A count of Transmitted Multicast Ethernet Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.9
aluGponPortCurrentRxFrsMcast
A count of Received Multicast Ethernet Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.10
aluGponPortCurrentFCSEs
A count of Frame Check Sequence(FCS)Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.11
aluGponPortCurrentECs
A count of Excessive Collisions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.12
aluGponPortCurrentLCs
A count of Late Collisions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.13
aluGponPortCurrentFTLs
A count of Frames that are Too Long.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.14
aluGponPortCurrentRBOs
A count of Receive Buffer Overflows.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.15
aluGponPortCurrentTBOs
A count of Transmit Buffer Overflows.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.16
aluGponPortCurrentSCFs
A count of successfully transmitted
Single Collision Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.17
aluGponPortCurrentMCFs
A count of successfully transmitted
Multiple Collision Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.18
aluGponPortCurrentSQEs
A count of SQE Test Error messages generated.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.19
aluGponPortCurrentDTs
A count of frames delayed due to Deferred
Transmission.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.20
aluGponPortCurrentIMTEs
A count of unsuccessfully transmitted frames
due to Internal MAC Transmit Error.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.21
aluGponPortCurrentCSEs
A count of Carrier Sense Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.22
aluGponPortCurrentAEs
A count of frames having Alignment Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.23
aluGponPortCurrentIMREs
A count of unsuccessfully received frames
due to Internal MAC Receive Error.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.24
aluGponPortCurrentLostFragsDn
A count of Lost GEM Fragments (downstream).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.25
aluGponPortCurrentLostFragsUp
A count of Lost GEM Fragments (upstream).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.26
aluGponPortCurrentRxFrags
A count of Received GEM Fragments.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.27
aluGponPortCurrentRxBlocks
A count of Received GEM Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.28
aluGponPortCurrentTxBlocks
A count of Transmitted GEM Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.29
aluGponPortCurrentTxFrags
A count of Transmitted GEM Fragments.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.30
aluGponPortCurrentBadHeaders
A count of Received GEM Headers that are bad.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.6.1.31

aluGponPortPreviousTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.7 · 1 row entry · 31 columns
Open in standard view 
The aluGponPortPreviousTable contains various
statistics that were collected during the previous 15 minute
interval.
aluGponPortPreviousEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1
Defines an entry in aluGponPortPreviousTable. Entries
are created and deleted by the system depending on port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluGponPortPreviousLastUpdTime
The last time at which this data was collected.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.1
aluGponPortPreviousPMEnabled
Indicates whether or not PM Collection has been enabled on the ONT.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.2
aluGponPortPreviousTxFrames
A count of Transmitted Ethernet Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.3
aluGponPortPreviousRxFrames
A count of Received Ethernet Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.4
aluGponPortPreviousTxBytes
A count of Transmitted Ethernet Bytes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.5
aluGponPortPreviousRxBytes
A count of Received Ethernet Bytes.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.6
aluGponPortPreviousDropFrsUp
A count of Dropped Frames Upstream.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.7
aluGponPortPreviousDropFrsDn
A count of Dropped Frames Downstream.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.8
aluGponPortPreviousTxFrsMcast
A count of Transmitted Multicast Ethernet Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.9
aluGponPortPreviousRxFrsMcast
A count of Received Multicast Ethernet Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.10
aluGponPortPreviousFCSEs
A count of Frame Check Sequence(FCS)Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.11
aluGponPortPreviousECs
A count of Excessive Collisions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.12
aluGponPortPreviousLCs
A count of Late Collisions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.13
aluGponPortPreviousFTLs
A count of Frames that are Too Long.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.14
aluGponPortPreviousRBOs
A count of Receive Buffer Overflows.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.15
aluGponPortPreviousTBOs
A count of Transmit Buffer Overflows.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.16
aluGponPortPreviousSCFs
A count of successfully transmitted
Single Collision Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.17
aluGponPortPreviousMCFs
A count of successfully transmitted
Multiple Collision Frames.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.18
aluGponPortPreviousSQEs
A count of SQE Test Error messages generated.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.19
aluGponPortPreviousDTs
A count of frames delayed due to Deferred
Transmission.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.20
aluGponPortPreviousIMTEs
A count of unsuccessfully transmitted frames
due to Internal MAC Transmit Error.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.21
aluGponPortPreviousCSEs
A count of Carrier Sense Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.22
aluGponPortPreviousAEs
A count of frames having Alignment Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.23
aluGponPortPreviousIMREs
A count of unsuccessfully received frames
due to Internal MAC Receive Error.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.24
aluGponPortPreviousLostFragsDn
A count of Lost GEM Fragments (downstream).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.25
aluGponPortPreviousLostFragsUp
A count of Lost GEM Fragments (upstream).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.26
aluGponPortPreviousRxFrags
A count of Received GEM Fragments.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.27
aluGponPortPreviousRxBlocks
A count of Received GEM Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.28
aluGponPortPreviousTxBlocks
A count of Transmitted GEM Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.29
aluGponPortPreviousTxFrags
A count of Transmitted GEM Fragments.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.30
aluGponPortPreviousBadHeaders
A count of Received GEM Headers that are bad.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.7.1.31

aluXdslLineStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.8 · 1 row entry · 19 columns
Open in standard view 
The aluXdslLineStatsTable contains various statistics being collected
from the BCM6519 for each physical XDSL line on the 'XDSL'
tmnxPortType port.
aluXdslLineStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1
Defines an entry in aluXdslLineStatsTable. Entries
are created and deleted by the system depending on port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID aluXdslLineID
Column Syntax OID
aluXdslLineStatsNearEndFECS
A count of Forward Error Correction Seconds - Near-End:
Count of 1-second intervals with one or more FEC corrections on
either one of the active latencies at the near-end.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.1
aluXdslLineStatsNearEndLOSS
A count of Loss of Signal Seconds - Near-End:
Count of 1-second intervals with one or more LOS defects present at
the near-end.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.2
aluXdslLineStatsNearEndES
A count of Errored Seconds - Near-End:
Count of 1-second intervals with one or more FEBE anomalies, or 1
or more LOS defects, or one or more RDI defects.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.3
aluXdslLineStatsNearEndSES
A count of Severely Errored Seconds - Near-End:
Count of 1-second intervals with 18 or more FEBE anomalies, or 1
or more LOS defects, or one or more RDI defects.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.4
aluXdslLineStatsNearEndUAS
A count of Unavailable Seconds - Near-End:
Count of 1-second intervals for which the ADSL line is not
available (the line becomes unavailable at the onset of 10 continuous
SES).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.5
aluXdslLineStatsNearEndAS
A count of Available Seconds - Near-End:
Count of 1 second intervals for which the ADSL line is available.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.6
aluXdslLineStatsNearEndLOFS
A count of Loss of Framing Seconds - Near-End:
Count of 1-second intervals containing one or more SEF defects at the
near-end.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.7
aluXdslLineStatsNearEndLPRS
A count of Loss of power Seconds - Near-End:
Count of 1-second intervals containing one or more LPR defects at the
near-end.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.8
aluXdslLineStatsNearEndLEFTRS
A count of Low Error-Free Troughtput Rate Seconds - Near-End.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.9
aluXdslLineStatsFarEndFECS
A count of Forward Error Correction Seconds - Far-End:
Count of 1-second intervals with one or more FEC corrections on
either one of the active latencies at the far-end.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.10
aluXdslLineStatsFarEndLOSS
A count of Loss of Signal Seconds - Far-End:
Count of 1-second intervals with one or more LOS defects present at
the far-end.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.11
aluXdslLineStatsFarEndES
A count of Errored Seconds - Far-End:
Count of 1-second intervals with one or more FEBE anomalies, or 1
or more LOS defects, or one or more RDI defects.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.12
aluXdslLineStatsFarEndSES
A count of Severely Errored Seconds - Far-End:
Count of 1-second intervals with 18 or more FEBE anomalies, or 1
or more LOS defects, or one or more RDI defects.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.13
aluXdslLineStatsFarEndUAS
A count of Unavailable Seconds - Far-End:
Count of 1-second intervals for which the ADSL line is not
available (the line becomes unavailable at the onset of 10 continuous
SES).
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.14
aluXdslLineStatsFarEndAS
A count of Available Seconds - Far-End:
Count of 1 second intervals for which the ADSL line is available.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.15
aluXdslLineStatsFarEndLOFS
A count of Loss of Framing Seconds - Far-End:
Count of 1-second intervals containing one or more SEF defects at the
far-end.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.16
aluXdslLineStatsFarEndLPRS
A count of Loss of power Seconds - Far-End:
Count of 1-second intervals containing one or more LPR defects at the
far-end.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.17
aluXdslLineStatsFarEndLEFTRS
A count of Low Error-Free Troughtput Rate Seconds - Far-End.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.18
aluXdslLineStatsUpTime
A count of the number of seconds already in showtime.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.8.1.19

aluShdslLineStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.9 · 1 row entry · 7 columns
Open in standard view 
The aluShdslLineStatsTable contains the SHDSL Performance
statistics being collected from the Socrate-4e for each
physical SHDSL line on the 'SHDSL' tmnxPortType port.
aluShdslLineStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.9.1
Defines an entry in aluShdslLineStatsTable. Entries
are created and deleted by the system depending on port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID aluShdslLineID
Column Syntax OID
aluShdslLineStatsLinkLoss
Link Loss Counter (Network Side). This counter is only valid for the
local STU-R and is not polled by the STU-C,
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.9.1.2
aluShdslLineStatsCVError
Code Violation Error Counter (Network Side). It is updated every
second when the link is active.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.9.1.4
aluShdslLineStatsES
Erroneous Seconds Counter (Network Side). It is updated every
second when the link is active.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.9.1.5
aluShdslLineStatsSES
Severely Erroneous Seconds Counter (Network Side). It is updated every
second when the link is active.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.9.1.6
aluShdslLineStatsLOSWS
LOSWS Counter (Network Side). It is updated every second when the link
is active.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.9.1.7
aluShdslLineStatsUAS
Unavailable Seconds Counter (Network Side). It is updated every
second when the link is active.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.9.1.8
aluShdslLineStatsInvalidDataFlag
It indicates the validity of the PM data. It is set to 0 when the
counters are reliable, otherwise it indicates that the
far-end counters are not reliable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.9.1.10

aluPortCtlStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.10 · 1 row entry · 8 columns
Open in standard view 
Defines the Nokia SAR series port control statistics
table for providing, via SNMP, the capability of retrieving the
detailed control packet statistics for ports in access modes.
This table is not applicable to ports in network or hybrid mode.
aluPortCtlStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.10.1
Defines an entry in aluPortCtlStatsTable. Entries are
created and deleted by the system depending port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluPortAccessCtlInFwdPkts
aluPortAccessCtlInFwdPkts indicates the number of CTL packets
that get forwarded on access port ingress .
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.10.1.1
aluPortAccessCtlInFwdOcts
aluPortAccessCtlInFwdOcts indicates the number of CTL octets
that get forwarded on access port ingress .
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.10.1.2
aluPortAccessCtlInDroPkts
aluPortAccessCtlInDroPkts indicates the number of CTL packets
that get dropped on access port ingress .
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.10.1.3
aluPortAccessCtlInDroOcts
aluPortAccessCtlInDroOcts indicates the number of CTL octets
that get dropped on access port ingress .
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.10.1.4
aluPortAccessCtlEgrFwdPkts
aluPortAccessCtlEgrFwdPkts indicates the number of CTL packets
that get forwarded on access port egress .
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.10.1.5
aluPortAccessCtlEgrFwdOcts
aluPortAccessCtlEgrFwdOcts indicates the number of CTL octets
that get forwarded on access port egress .
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.10.1.6
aluPortAccessCtlEgrDroPkts
aluPortAccessCtlEgrDroPkts indicates the number of CTL packets
that get dropped on access port egress .
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.10.1.7
aluPortAccessCtlEgrDroOcts
aluPortAccessCtlEgrDroOcts indicates the number of CTL octets
that get dropped on access port egress .
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.10.1.8

aluFrIfStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.11 · 1 row entry · 21 columns
Open in standard view 
A table is used to gather the additional statistics for 
Nokia 7705 SAR series devices on a particular
frame relay Interface.
aluFrIfStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1
The statistics collected on a single frame relay
Interface.
Indexes
No indexes recorded
Column Syntax OID
aluFrIfRxFrames
The number of frames received on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.1
aluFrIfRxOctets
The number of octets received on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.2
aluFrIfRxDEFrames
The number of DE=1 frames received on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.3
aluFrIfRxDEOctets
The number of DE=1 octets received on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.4
aluFrIfRxFECNFrames
The number of FECN frames received on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.5
aluFrIfRxBECNFrames
The number of BECN frames received on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.6
aluFrIfTxFrames
The number of frames sent on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.7
aluFrIfTxOctets
The number of octets sent on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.8
aluFrIfTxDEFrames
The number of DE=1 frames sent on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.9
aluFrIfTxDEOctets
The number of DE=1 octets sent on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.10
aluFrIfTxFECNFrames
The number of FECN frames sent on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.11
aluFrIfTxBECNFrames
The number of BECN frames sent on this interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.12
aluFrIfRxDiscardsInvalidDlci
The number of received frames with invalid or unsupported DLCI.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.13
aluFrIfRxLastInvalidDlci
The DLCI of the last received frames with an invalid DLCI.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.14
aluFrIfRxDiscardsCrcErrors
The received crc errors.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.15
aluFrIfRxDiscardsAlignmentErrors
The received alignment errors.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.16
aluFrIfRxDiscardsLengthViolations
The received length errors.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.17
aluFrIfRxDiscardsIllegalHeader
The received frames with illegal header
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.18
aluFrIfRxDiscardsOtherErrors
The other received errors
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.19
aluFrIfTxDiscardsUnderruns
Transmit Underruns.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.20
aluFrIfTxDiscardsOtherErrors
The other transmit errors
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.11.1.21

aluExtFrCircuitTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.12 · 1 row entry · 8 columns
Open in standard view 
A table containing stats information about specific Data
Link Connections (DLC) or virtual circuits.
aluExtFrCircuitEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.12.1
The stats information regarding a single Data Link
Connection.
Indexes
No indexes recorded
Column Syntax OID
aluExtFrCircuitReceivedCrcDiscards
The number of inbound frames dropped because of Crc
errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.12.1.1
aluExtFrCircuitReceivedAborts
The number of inbound frames dropped due to insufficient buffer resource.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.12.1.2
aluExtFrCircuitReceivedOtherDiscards
The number of inbound frames dropped because of other
errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.12.1.3
aluExtFrCircuitSentAborts
The number of outbound frames dropped because of format
errors, or because the VC is inactive.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.12.1.4
aluExtFrCircuitSentFECNs
Number of frames sent to the network indicating
forward congestion since the virtual circuit was
created. This occurs when transmission queue is congested or
when frames sent with FECN flage set.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.12.1.5
aluExtFrCircuitSentBECNs
Number of frames sent to the network indicating
backward congestion since the virtual circuit was
created. This occurs when frames sent with
FECN flags set.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.12.1.6
aluExtFrCircuitReceivedDEOctets
Number of octets received from the network indicating
that they were eligible for discard since the virtual
circuit was created. This occurs when the remote DTE
sets the DE flag, or when in remote DTE's switch
detects …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.12.1.7
aluExtFrCircuitSentDEOctets
Number of octets sent to the network indicating that
they were eligible for discard since the virtual
circuit was created. This occurs when the local DTE
sets the DE flag, indicating that during Network
congestion sit…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.12.1.8

aluEthPtpTimestampStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.13 · 1 row entry · 7 columns
Open in standard view 
Defines the Nokia SAR series port IEEE1588 PTP
Transparent Clock packet statistics table for providing, 
via SNMP, the capability of retrieving statistical information 
relating to packets that are timestamped.
aluEthPtpTimestampStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.13.1
Defines an entry in aluEthPtpTimestampStatsTable. Entries are
created and deleted by the system depending port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluEthPtpInSyncPktTimestamped
Indicate the number of ingress Sync packets that have been
timestamped.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.13.1.1
aluEthPtpOutSyncPktTimestamped
Indicate the number of egress Sync packets that have been
timestamped.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.13.1.2
aluEthPtpInDelReqPktTimestamped
Indicate the number of ingress Delay Request packets that have been
timestamped.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.13.1.3
aluEthPtpOutDelReqPktTimestamped
Indicate the number of egress Delay Request packets that have been
timestamped.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.13.1.4
aluEthPtpInFcsErrorCount obsolete
Indicate the number of ingress packets that contained FCS Error.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.13.1.5
aluEthPtpOutFcsErrorCount obsolete
Indicate the number of egress packets that contained FCS Error.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.13.1.6
aluEthPtpOutFollowUpPktTimestamped
Indicate the number of egress Follow-Up packets that have been
transmitted.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.13.1.7

aluPortNetRingAddDropStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.14 · 1 row entry · 9 columns
Open in standard view 
Defines the Nokia 7705 series network add-drop ring port
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the ring add-drop port queues.
aluPortNetRingAddDropStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1
Defines an entry in aluPortNetRingAddDropStatsTable. Entries are
created and deleted by the system depending on the add-drop port queue policy
being used at the specific port.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID aluPortNetRingAddDropQueueIndex
Column Syntax OID
aluPortNetRingAddDropQueueIndex
aluPortNetRingAddDropQueueIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely
identifies a network ring add-drop queue for the specified port in the
manage…
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1.1
aluPortNetRingAddDropFwdInProfPkts
aluPortNetRingAddDropFwdInProfPkts indicates the number of conforming
network add-drop packets forwarded on this port using this queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1.2
aluPortNetRingAddDropFwdOutProfPkts
aluPortNetRingAddDropFwdOutProfPkts indicates the number of exceeding
network add-drop packets forwarded on this port using this queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1.3
aluPortNetRingAddDropFwdInProfOcts
aluPortNetRingAddDropFwdInProfOcts indicates the number of conforming
network add-drop octets forwarded on this port using this queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1.4
aluPortNetRingAddDropFwdOutProfOcts
aluPortNetRingAddDropFwdOutProfOcts indicates the number of exceeding
network add-drop octets forwarded on this port using this queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1.5
aluPortNetRingAddDropDroInProfPkts
aluPortNetRingAddDropDroInProfPkts indicates the number of conforming
network add-drop packets dropped on this port using this queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1.6
aluPortNetRingAddDropDroOutProfPkts
aluPortNetRingAddDropDroOutProfPkts indicates the number of exceeding
network add-drop packets dropped on this port using this queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1.7
aluPortNetRingAddDropDroInProfOcts
aluPortNetRingAddDropDroInProfOcts indicates the number of conforming
network add-drop octets dropped on this port using this queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1.8
aluPortNetRingAddDropDroOutProfOcts
aluPortNetRingAddDropDroOutProfOcts indicates the number of exceeding
network add-drop octets dropped on this port using this queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.14.1.9

aluPortNgeL2KeygroupStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.15 · 1 row entry · 10 columns
Open in standard view 
Defines the Nokia 7705 series Network Group Encryption port-level
statistics.
aluPortNgeL2KeygroupStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1
Defines an entry in the aluPortNgeL2KeygroupStatsTable. Entries are
created and deleted by the system depending port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluPortNgeL2KeygroupTxFrames
Indicates the number of egress Ethernet frames that
have been encrypted.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.1
aluPortNgeL2KeygroupTxBytes
Indicates the number of egress Ethernet bytes that
have been encrypted.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.2
aluPortNgeL2KeygroupRxFrames
Indicates the number of ingress Ethernet frames that
have been decrypted.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.3
aluPortNgeL2KeygroupRxBytes
Indicates the number of ingress Ethernet bytes that
have been decrypted.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.4
aluPortNgeL2KGRxDropOtherFrames
Indicates the number of ingress Ethernet frames that
have been dropped.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.5
aluPortNgeL2KGRxDropOtherBytes
Indicates the number of ingress Ethernet bytes that
have been dropped.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.6
aluPortNgeL2KeygroupTxDropFrames
Indicates the number of egress Ethernet frames that
have been dropped.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.7
aluPortNgeL2KeygroupTxDropBytes
Indicates the number of egress Ethernet bytes that
have been dropped.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.8
aluPortNgeL2KGRxDrpInvldSpiFrms
Indicates the number of ingress Ethernet frames that
have been dropped due to invalid SPI.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.9
aluPortNgeL2KGRxDrpInvldSpiBytes
Indicates the number of ingress Ethernet bytes that
have been dropped due to invalid SPI.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.15.1.10

aluRS232SocketStatsTable

table
.1.3.6.1.4.1.6527.6.1.2.2.2.12.16 · 1 row entry · 10 columns
Open in standard view 
The aluRS232SocketStatsTable contains an entry for each Serial socket
channel that exists in the system. Each row contains traffic and event
counters.
aluRS232SocketStatsEntry entry .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1
Defines an entry in the aluRS232SocketStatsTable. Entries are
created and deleted by the system depending on the port
configuration.
Indexes
TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
aluRS232SocketRxChars
The value of the object aluRS232SocketRxChars indicates the number of
characters received from the Serial data stream.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.1
aluRS232SocketTxChars
The value of the object aluRS232SocketTxChars indicates the number of
characters transmitted to the Serial data stream.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.2
aluRS232SocketEopIdleTimeoutCnt
The value of the object aluRS232SocketEopIdleTimeoutCnt indicates the
number of times an end of packet event occurred due to idle timeout.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.3
aluRS232SocketEopLengthCnt
The value of the object aluRS232SocketEopLengthCnt indicates the
number of times an end of packet event occurred due to length.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.4
aluRS232SocketEopSpecialCharCnt
The value of the object aluRS232SocketEopSpecialCharCnt indicates the
number of times an end of packet event occurred due to special
character.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.5
aluRS232SocketIngrForwardedPkts
The value of the object aluRS232SocketIngrForwardedPkts indicates the
number of packets (constructed from the incoming Serial data stream)
that were successfully forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.6
aluRS232SocketEgrForwardedPkts
The value of the object aluRS232SocketIngrForwardedPkts indicates the
number of packets (destined for the outgoing Serial data stream)
that were successfully forwarded.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.7
aluRS232SocketIngrDroppedPkts
The value of the object aluRS232SocketIngrDroppedPkts indicates the
number of packets (constructed from the incoming Serial data stream)
that were dropped due to errors.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.8
aluRS232SocketEgrDroppedPkts
The value of the object aluRS232SocketEgrDroppedPkts indicates the
number of packets (destined for the outgoing Serial data stream)
that were dropped due to errors.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.9
aluRS232SocketSquelchCnt
The value of the object aluRS232SocketSquelchCnt indicates the
number of times squelch has been activated.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.6.1.2.2.2.12.16.1.10