aluVoiceLoopback
ALU-PORT-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.5
Object
column
r/w
Enumeration
aluVoiceLoopback is used to put the port into a loopback mode.
Only internal loopbacks are supported.
'internalAnalog' (aka Loopback B) is located on the analag side of the
CODEC. 'internalDigital' (aka Loopback A) is located on the digital
side of the CODEC.
'internalAnalog' is closer to the line-side than 'internalDigital'.
The value 'internalAnalog' is valid for em channels only.
Context
- MIB
- ALU-PORT-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aluVoiceEntry
- Table
- aluVoiceTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | internalAnalog |
3 | internalDigital |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluVoiceRowStatus aluVoiceRowStatus controls the creation and deletion of
row entries in the aluVoiceTable.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiM… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.1 |
| aluVoiceSignalingLeadM aluVoiceSignalingLeadM is an input (or scan) lead.
This object is valid for em channels only.
This object is invalid for em channels whose aluVoiceSi… | column | AluVoiceSignalingLead | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.10 |
| aluVoiceSignalingLeadsState aluVoiceSignalingLeadsState is an array of two bytes used to indicate
the current state of the output (or drive) and input (or scan)
signaling leads (AluVoiceSignalingLead).
… | column | OctetString | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.11 |
| aluVoiceSignalMode The value of aluVoiceSignalMode indicates the type of signalling
associated with the channel:
none - Indicates no signalling on this channel.
cas - Indicates Channel Associated… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.12 |
| aluVoiceCallState The current state of the voice circuit. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.13 |
| aluVoiceIncomingCallCount The number of incoming calls (received by the circuit).
This count is accumulated since the last time the statistics were cleared. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.14 |
| aluVoiceIncomingCallCountAns The number of incoming calls (received by the circuit) that were answered.
This count is accumulated since the last time the statistics were cleared. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.15 |
| aluVoiceIncomingCallTime The total duration (in seconds) of all incoming calls.
This count is accumulated since the last time the statistics were cleared. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.16 |
| aluVoiceIncomingCallTimeAns The total duration (in seconds) of all incoming calls that were answered.
This count is accumulated since the last time the statistics were cleared. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.17 |
| aluVoiceOutgoingCallCount The number of outgoing calls (originated by the circuit).
This count is accumulated since the last time the statistics were cleared. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.18 |
| aluVoiceOutgoingCallCountAns The number of outgoing calls (originated by the circuit) that were answered.
This count is accumulated since the last time the statistics were cleared. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.19 |
| aluVoiceLastChangeTime aluVoiceLastChangeTime contains the sysUpTime value of the
most recently modified writable variable in the
aluVoiceEntry row for this Voice channel. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.2 |
| aluVoiceOutgoingCallTime The total duration (in seconds) of all outgoing calls.
This count is accumulated since the last time the statistics were cleared. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.20 |
| aluVoiceOutgoingCallTimeAns The total duration (in seconds) of all outgoing calls that were answered.
This count is accumulated since the last time the statistics were cleared. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.21 |
| aluVoiceOutOfServiceTime The time in seconds for which the circuit was unavailable for connection.
This count is accumulated since the last time the statistics were cleared. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.22 |
| aluVoiceIdleTime The time in seconds for which the circuit was idle.
This count is accumulated since the last time the statistics were cleared. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.23 |
| aluVoiceTotalCallCount The sum of aluVoiceIncomingCallCount and aluVoiceOutgoingCallCount.
This count is accumulated since the last time the statistics were cleared. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.24 |
| aluVoiceTotalCallTime The sum of aluVoiceIncomingCallTime and aluVoiceOutgoingCallTime.
This count is accumulated since the last time the statistics were cleared. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.25 |
| aluVoiceIdleCode This object contains the code transmitted on the signaling path when
the channel is configured to transmit idle fault signaling. It's also
used for driving/scanning the E&M signal… | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.26 |
| aluVoiceSeizedCode This object contains the code transmitted on the signaling path when
the channel is configured to transmit seized fault signaling. It's also
used for driving/scanning the E&M sign… | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.27 |
| aluVoiceType aluVoiceType indicates the channel type. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.3 |
| aluVoiceSignalingMode aluVoiceSignalingMode configures the channel's signaling mode for
E&M or transmission only.
This object is valid for em channels only.
transmissionOn… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.4 |
| aluVoiceFaultSignaling aluVoiceFaultSignaling is used to configure fault signaling as idle
or seized.
The idle code is defined by aluVoiceIdleCode.
The seized code is defined by aluVoiceS… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.6 |
| aluVoiceSignalBitsState aluVoiceSignalBitsState is an array of two bytes used to indicate the
current state of the ABCD signalling bits for the voice channel.
The first byte of the array d… | column | OctetString | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.7 |
| aluVoiceClockSource aluVoiceClockSource indicates the clock for transmitted data from
either the internal clock ('nodeTimed'), or from a clock recovered
from the line's receive data stream ('loopTime… | column | TIMETRA-PORT-MIBTmnxDSXClockSource | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.8 |
| aluVoiceSignalingLeadE aluVoiceSignalingLeadE is an output (or drive) lead.
This object is valid for em channels only.
This object is invalid for em channels whose aluVoice… | column | AluVoiceSignalingLead | .1.3.6.1.4.1.6527.6.1.2.2.2.4.8.1.9 |