aluGnssPortCurUtcOffset
ALU-PORT-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.14
Object
column
Integer32
The value of the object aluGnssPortCurUtcOffset indicates the
current offset between GPS time and UTC in seconds, as provided by the
GNSS receiver module.
The value can be valid or invalid. See aluGnssPortCurUtcOffsetValid.
Context
- MIB
- ALU-PORT-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- aluGnssPortEntry
- Table
- aluGnssPortTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: -65536-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluGnssPortLastChangeTime The value of aluGnssPortLastChangeTime indicates the sysUpTime at
the time of the last modification of this entry. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.1 |
| aluGnssPortPositionLongitude The value of the object aluGnssPortPositionLongitude indicates the
longitude of the antenna.
Encoding:
< 0: south of equator
= 0: at equator
> 0: north of … | column | 0.00001 decimal degrees Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.10 |
| aluGnssPortPositionAltitude The value of the object aluGnssPortPositionAltitude indicates the
altitude of the antenna.
Encoding:
< 0: below sea level
= 0: at sea level
> 0: above sea … | column | 1 metre Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.11 |
| aluGnssPortDateAndTime The value of the object aluGnssPortDateAndTime indicates the current
date and time as provided by the receiver module. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.12 |
| aluGnssPortReceiverStatus The value of the object aluGnssPortReceiverStatus indicates the
status of the GNSS receiver module. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.13 |
| aluGnssPortCurUtcOffsetValid The value of the object aluGnssPortCurUtcOffsetValid indicates
'true (1)' if the aluGnssPortCurUtcOffset is known to be correct. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.15 |
| aluGnssPortReceiverFwVersion The value of the object aluGnssPortReceiverFwVersion indicates
the firmware version of the GNSS receiver module.
The format of the value may differ between receiver… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.16 |
| aluGnssPortType The value of the object aluGnssPortType specifies which constellation
types the installed GNSS receiver module shall process. | column | Bits | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.2 |
| aluGnssPortAntennaCableDelay The value of the object aluGnssPortAntennaCableDelay specifies the
antenna cable delay that has to be taken into account given the
characteristics (eg. length) of the installed an… | column | 1 ns Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.3 |
| aluGnssPortElevationMaskAngle The value of the object aluGnssPortElevationMaskAngle specifies the
the elevation mask angle. It provides a method of
filtering satellites to be used by the system.
… | column | 1 degree Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.4 |
| aluGnssPortVisibleSatelliteCount The value of the object aluGnssPortVisibleSatelliteCount indicates the
number of satellites currently 'seen' by the GNSS receiver module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.5 |
| aluGnssPortUsedSatelliteCount The value of the object aluGnssPortUsedSatelliteCount indicates the
number of satellites currently 'used' in computations by the GNSS
receiver module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.6 |
| aluGnssPortAntennaStatus The value of the object aluGnssPortAntennaStatus indicates the status
of the antenna. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.7 |
| aluGnssPortSyncStatus The value of the object aluGnssPortSyncStatus indicates the status
of the GNSS receiver module with respect to generating a sync-worthy
clock signal. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.8 |
| aluGnssPortPositionLatitude The value of the object aluGnssPortPositionLatitude indicates the
latitude of the antenna.
Encoding:
< 0: west of prime meridian
= 0: at prime meridian
> 0… | column | 0.00001 decimal degrees Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.9 |