aluSerialMddbEntry
ALU-PORT-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1
Object
row
Each row entry represents a Serial MDDB in the system. Entries for serial mddbs can not be created and deleted via SNMP SET operations. The Entries are automatically created when the tmnxMDAAssignedType object is set to the SCADA MDA type and mode mode supports serail MDDB. For each aluSerialMddbEntry, there will be a corresponding entry in the aluScadaBridgeTable.
Context
- MIB
- ALU-PORT-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1- Type
- row
- Status
- current
- Parent
- aluSerialMddbTable
- Table
- aluSerialMddbTable
- Children
- 10
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluSerialMddbReportAlarms The value of aluSerialMddbReportAlarms determines if the
the following alarms for branches belong to the Mddb should be monitored.
hcmOof - Reports local HCM out-o… | column | AluRS232ReportStatus | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.1 |
| aluSerialMddbRedMode aluSerialMddbRedMode specifies the redundant mode of the bridge.
In auto mode, both master branches are active; one could be for voice and another one for data.
In manual mode, on… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.10 |
| aluSerialMddbForceActive aluSerialMddbForceActive forces the specified master branch to be
active. default is the master branch 1.
Not configurable in when aluSerialMddbRedMode is auto | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.2 |
| aluSerialMddbSquelchStatus aluSerialMddbSquelchStatus shows squelch status of the scada bridge. It is a 32-bit integer and
each bit represent a branch. Bit with value one indicates that the associated bran… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.3 |
| aluSerialMddbSquelchEnable During nomal SCADA system operation, it is common for a single slave to lock-up
and continue to send data after the allocated response time. To solve the problem,
the bridge has … | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.4 |
| aluSerialMddbSquelchTimeout The bridge will start squelching after a user-selectable time period.
aluSerialMddbSquelchTimeout specifies such a period in seconds. It can only be set to value la… | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.5 |
| aluSerialMddbSquelchReset aluSerialMddbSquelchReset is a one shot action used to reset the squelching. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.6 |
| aluSerialMddbSpeed aluSerialMddbSpeed specifies the speed of the Mddb.
A value of 'speed1200' sets the bridge to 1200bps. These
speed definitions are consistent with those used for RS232 port.
… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.7 |
| aluSerialMddbSquelchResetMode aluSerialMddbResetMode specifies the method of re-enabling squelched branch.
In manual mode, squelched branches can be only re-enabled when user sets aluSerialMddbSquelchReset.
I… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.8 |
| aluSerialMddbSquelchResetTimeout aluSerialMddbResetTimeout specifies how long the squelched branches have to be remain squelched,
after the squelch condition is cleared and before it can be re-enabled.
It is on… | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.21.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| TIMETRA-CHASSIS-MIBtmnxChassisIndex The value of tmnxChassisIndex specifies a system identifier. The value
of this object cannot be changed. The only supported value is '1'.
Different values of TmnxPh… | column | TmnxChassisIndex | .1.3.6.1.4.1.6527.3.1.2.2.1.3.1.1 |
| TIMETRA-PORT-MIBtmnxPortPortID | - | - | - |