aluDslPortNtrErrorHistory
ALU-PORT-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.17
Object
column
OctetString
The aluDslPortNtrErrorHistory is an array of bytes used to
indicate phase error history. Each byte represents the phase
error between the encoded phase information (as present in
the NTR field of the overhead frame) and the CPE regenerated
NTR clock. Therefore each byte indicates the phase error between
the CO NTR clock and the CPE regenerated NTR clock. These values
are expressed in clock ticks based on the
aluDslPortNtrSampleClockPeriod. The time interval between bytes
in this array is 1/16 of a second
It is applicable only when the value of tmnxPortType is 'XDSL'.
Context
- MIB
- ALU-PORT-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- aluDslPortEntry
- Table
- aluDslPortTable
- Siblings
- 16
Syntax
OctetString
Values & Constraints
Object Constraints
range: 256-256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluDslPortBondingType The aluDslPortBondingType indicates the bonding type of the DSL port. | column | AluDslTpsTcType | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.1 |
| aluDslPortNtrDslLineID The aluDslPortNtrDslLineID indicates the DSL physical line controlling
the NTR. The value of '0' indicates that the NTR is not available on
the port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.10 |
| aluDslPortNtrLockedStatus The aluDslPortNtrLockedStatus indicates that NTR status. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.11 |
| aluDslPortNtrStdDev The aluDslPortNtrStdDev indicates the standard deviation, or one
sigma, over a 10 second period of the phase error between the
encoded phase information (as present in the NTR fie… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.12 |
| aluDslPortNtrMaxError The aluDslPortNtrMaxError indicates the maximum phase error, after
lock has been declared, between the encoded phase information
(as present in the NTR field of the overhead fra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.13 |
| aluDslPortNtrMinError The aluDslPortNtrMinError indicates the minimum phase error, after
lock has been declared, between the encoded phase information
(as present in the NTR field of the overhead fra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.14 |
| aluDslPortAdsl2Plus The aluDslPortAdsl2Plus indicates the support of G992.5
Annex A operations which are specific to POTS (g992Dot5a), or
support of G992.5 ISDN operations over ADSL2+ (g992Dot5b).
… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.15 |
| aluDslPortNtrSampleClockPeriod The aluDslPortNtrSampleClockPeriod indicates the sample
clock period for NTR in nanoseconds. This number multiplied by
the aluDslPortNtrErrorHistory value results in the phase err… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.16 |
| aluDslPortBondingState The aluDslPortBondingState indicates the bonding opretional state of
the DSL port. The 'up' state indicates that the bonding group can
be used for passing traffic. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.2 |
| aluDslPortBondingBitRateUS The aluDslPortBondingBitRateUS indicates the upstream bonding bit
rate, unit is 1Kpbs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.3 |
| aluDslPortBondingBitRateDS The aluDslPortBondingBitRateDS indicates the downstream bonding bit
rate, unit is 1Kpbs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.4 |
| aluDslPortAtmVpi The aluDslPortAtmVpi indicates the Vpi for the bonding group.
It is only used when the aluDslPortBondingType is 'atm'. | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.5 |
| aluDslPortAtmVci aluDslPortAtmVci indicates the Vci for the bonding group.
The minimum value is 32, values 0 to 31 are
reserved for other uses by the ITU and ATM Forum.
It is only used when the … | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.6 |
| aluDslPortAtmF5OamLoopback aluDslPortAtmF5OamLoopback is used to generate an CPE initiated F5
OAM loopback cell on an ATM bonding type DSL port .
The aluDslPortAtmF5OamLoopback always starts… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.7 |
| aluDslPortAtmF5OamLoopbackStatus aluDslPortAtmF5OamLoopbackStatus is used to indicate the F5 loopback
test result.
It is applicable only when the value of tmnxPortType is 'XDSL' and the
aluDslPortB… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.8 |
| aluDslPortAtmF5OamLoopbackTime aluDslPortAtmF5OamLoopbackTime is used to indicate the round-trip time
, in ms, for the ATM F5 Loopback testing.
It is applicable only when the value of tmnxPortTyp… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.9 |