aluDslPortNtrLockedStatus
ALU-PORT-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.11
Object
column
Enumeration
The aluDslPortNtrLockedStatus indicates that NTR status.
Context
- MIB
- ALU-PORT-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- aluDslPortEntry
- Table
- aluDslPortTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | acquringLock |
1 | preLock |
2 | lock |
3 | notSelected |
4 | freeRunning |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluDslPortBondingType The aluDslPortBondingType indicates the bonding type of the DSL port. | column | AluDslTpsTcType | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.1 |
| aluDslPortNtrDslLineID The aluDslPortNtrDslLineID indicates the DSL physical line controlling
the NTR. The value of '0' indicates that the NTR is not available on
the port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.10 |
| aluDslPortNtrStdDev The aluDslPortNtrStdDev indicates the standard deviation, or one
sigma, over a 10 second period of the phase error between the
encoded phase information (as present in the NTR fie… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.12 |
| aluDslPortNtrMaxError The aluDslPortNtrMaxError indicates the maximum phase error, after
lock has been declared, between the encoded phase information
(as present in the NTR field of the overhead fra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.13 |
| aluDslPortNtrMinError The aluDslPortNtrMinError indicates the minimum phase error, after
lock has been declared, between the encoded phase information
(as present in the NTR field of the overhead fra… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.14 |
| aluDslPortAdsl2Plus The aluDslPortAdsl2Plus indicates the support of G992.5
Annex A operations which are specific to POTS (g992Dot5a), or
support of G992.5 ISDN operations over ADSL2+ (g992Dot5b).
… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.15 |
| aluDslPortNtrSampleClockPeriod The aluDslPortNtrSampleClockPeriod indicates the sample
clock period for NTR in nanoseconds. This number multiplied by
the aluDslPortNtrErrorHistory value results in the phase err… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.16 |
| aluDslPortNtrErrorHistory The aluDslPortNtrErrorHistory is an array of bytes used to
indicate phase error history. Each byte represents the phase
error between the encoded phase information (as present in
… | column | OctetString | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.17 |
| aluDslPortBondingState The aluDslPortBondingState indicates the bonding opretional state of
the DSL port. The 'up' state indicates that the bonding group can
be used for passing traffic. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.2 |
| aluDslPortBondingBitRateUS The aluDslPortBondingBitRateUS indicates the upstream bonding bit
rate, unit is 1Kpbs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.3 |
| aluDslPortBondingBitRateDS The aluDslPortBondingBitRateDS indicates the downstream bonding bit
rate, unit is 1Kpbs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.4 |
| aluDslPortAtmVpi The aluDslPortAtmVpi indicates the Vpi for the bonding group.
It is only used when the aluDslPortBondingType is 'atm'. | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.5 |
| aluDslPortAtmVci aluDslPortAtmVci indicates the Vci for the bonding group.
The minimum value is 32, values 0 to 31 are
reserved for other uses by the ITU and ATM Forum.
It is only used when the … | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.6 |
| aluDslPortAtmF5OamLoopback aluDslPortAtmF5OamLoopback is used to generate an CPE initiated F5
OAM loopback cell on an ATM bonding type DSL port .
The aluDslPortAtmF5OamLoopback always starts… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.7 |
| aluDslPortAtmF5OamLoopbackStatus aluDslPortAtmF5OamLoopbackStatus is used to indicate the F5 loopback
test result.
It is applicable only when the value of tmnxPortType is 'XDSL' and the
aluDslPortB… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.8 |
| aluDslPortAtmF5OamLoopbackTime aluDslPortAtmF5OamLoopbackTime is used to indicate the round-trip time
, in ms, for the ATM F5 Loopback testing.
It is applicable only when the value of tmnxPortTyp… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.11.1.9 |