aluVoicePortSignalingType
ALU-PORT-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.8
Object
column
r/w
Enumeration
The value of the object aluVoicePortSignalingType specifies how the
signaling leads operate to establish a call.
This object is valid for fxo and fxs ports only.
privateLineAutomaticRingdown3600 - Does not involve exchange.
When subscriber 1 goes off-hook, cadenced ringing occurs at
subscriber 2. Subscriber 2 answers call by going off-hook.
privateLineAutomaticRingdown1511 - same description as for 3600PLAR but
ABCD bits differ
loopStart3600 - Subscriber applies loop current to seize the line.
Central office signals idle throughout the entire call and does not
provide answer supervision.
profileOne1511 - same as 3600LS but ABCD bits differ
remoteExtension3600 - Subscriber seizes the line by closing loop.
Exchange signals idle throughout the entire call and does not
provide answer supervision. Subscriber can apply a recall signal
by connecting the B lead to earth.
fifteenElevenSigSel137 - aka Exchange_transp
Valid values for fxo ports:
loopStart3600 (muLaw only; default)
profileOne1511 ( aLaw only)
remoteExtension3600 ( aLaw only; default)
fifteenElevenSigSel137 ( aLaw only)
Valid values for fxs ports:
privateLineAutomaticRingdown3600
privateLineAutomaticRingdown1511 ( aLaw only)
loopStart3600 (muLaw only; default)
profileOne1511 ( aLaw only)
remoteExtension3600 ( aLaw only; default)
fifteenElevenSigSel137 ( aLaw only)
To change aluVoicePortSignalingType, the port must be shutdown.
Context
- MIB
- ALU-PORT-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aluVoicePortEntry
- Table
- aluVoicePortTable
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | notApplicable |
1 | privateLineAutomaticRingdown3600 |
2 | privateLineAutomaticRingdown1511 |
3 | loopStart3600 |
4 | profileOne1511 |
5 | remoteExtension3600 |
6 | fifteenElevenSigSel137 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluVoicePortLastChangeTime aluVoicePortLastChangeTime contains the sysUpTime value of the most
recently modified writable variable in the aluVoicePortEntry row for
this port. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.1 |
| aluVoicePortType aluVoicePortType configures the interface-type of the physical port. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.2 |
| aluVoicePortAudioWires aluVoicePortAudioWires is used to configure the number of audio wires
for a given E&M interface.
This object is valid for em ports only.
twoWires is … | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.3 |
| aluVoicePortTlpRx aluVoicePortTlpRx is used to configure the receive Transmission Level
Point level for a given voice interface. The receive TLP refers to the
digital-to-analog level.
… | column | tenths of decibels AluVoicePortTlp | .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.4 |
| aluVoicePortTlpTx aluVoicePortTlpTx is used to configure the transmit Transmission Level
Point level for a given voice interface. The transmit TLP refers to the
analog-to-digital level.
… | column | tenths of decibels AluVoicePortTlp | .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.5 |
| aluVoicePortLineBalance The value of the object aluVoicePortLineBalance specifies the line
balance on a given voice interface.
This object is valid for fxo and fxs ports only.
… | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.6 |
| aluVoicePortRingGeneration The value of the object aluVoicePortRingGeneration specifies the
frequency (in Hz) of the generated ring signal.
This object is valid for fxs ports only. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.7.1.7 |