aluGnssPortPositionLongitude
ALU-PORT-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.10
Object
column
0.00001 decimal degrees Integer32
The value of the object aluGnssPortPositionLongitude indicates the
longitude of the antenna.
Encoding:
< 0: south of equator
= 0: at equator
> 0: north of equator
The unit corresponds to a resolution of approximately 1.11 metres.
The default value is 134217727. It's considered invalid. It's used to
signify that a surveyed (valid) position has yet to be determined.
Context
- MIB
- ALU-PORT-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.10- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.00001 decimal degrees
- Parent
- aluGnssPortEntry
- Table
- aluGnssPortTable
- Siblings
- 15
Syntax
0.00001 decimal degrees Integer32
Values & Constraints
Object Constraints
range: -18000000-18000000
range: 134217727-134217727
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluGnssPortLastChangeTime The value of aluGnssPortLastChangeTime indicates the sysUpTime at
the time of the last modification of this entry. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.1 |
| aluGnssPortPositionAltitude The value of the object aluGnssPortPositionAltitude indicates the
altitude of the antenna.
Encoding:
< 0: below sea level
= 0: at sea level
> 0: above sea … | column | 1 metre Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.11 |
| aluGnssPortDateAndTime The value of the object aluGnssPortDateAndTime indicates the current
date and time as provided by the receiver module. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.12 |
| aluGnssPortReceiverStatus The value of the object aluGnssPortReceiverStatus indicates the
status of the GNSS receiver module. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.13 |
| aluGnssPortCurUtcOffset The value of the object aluGnssPortCurUtcOffset indicates the
current offset between GPS time and UTC in seconds, as provided by the
GNSS receiver module.
The value… | column | Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.14 |
| aluGnssPortCurUtcOffsetValid The value of the object aluGnssPortCurUtcOffsetValid indicates
'true (1)' if the aluGnssPortCurUtcOffset is known to be correct. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.15 |
| aluGnssPortReceiverFwVersion The value of the object aluGnssPortReceiverFwVersion indicates
the firmware version of the GNSS receiver module.
The format of the value may differ between receiver… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.16 |
| aluGnssPortType The value of the object aluGnssPortType specifies which constellation
types the installed GNSS receiver module shall process. | column | Bits | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.2 |
| aluGnssPortAntennaCableDelay The value of the object aluGnssPortAntennaCableDelay specifies the
antenna cable delay that has to be taken into account given the
characteristics (eg. length) of the installed an… | column | 1 ns Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.3 |
| aluGnssPortElevationMaskAngle The value of the object aluGnssPortElevationMaskAngle specifies the
the elevation mask angle. It provides a method of
filtering satellites to be used by the system.
… | column | 1 degree Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.4 |
| aluGnssPortVisibleSatelliteCount The value of the object aluGnssPortVisibleSatelliteCount indicates the
number of satellites currently 'seen' by the GNSS receiver module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.5 |
| aluGnssPortUsedSatelliteCount The value of the object aluGnssPortUsedSatelliteCount indicates the
number of satellites currently 'used' in computations by the GNSS
receiver module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.6 |
| aluGnssPortAntennaStatus The value of the object aluGnssPortAntennaStatus indicates the status
of the antenna. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.7 |
| aluGnssPortSyncStatus The value of the object aluGnssPortSyncStatus indicates the status
of the GNSS receiver module with respect to generating a sync-worthy
clock signal. | column | Enumeration | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.8 |
| aluGnssPortPositionLatitude The value of the object aluGnssPortPositionLatitude indicates the
latitude of the antenna.
Encoding:
< 0: west of prime meridian
= 0: at prime meridian
> 0… | column | 0.00001 decimal degrees Integer32 | .1.3.6.1.4.1.6527.6.1.2.2.2.4.24.1.9 |