CISCO-STACK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

293

sysTrapReceiverTable

table deprecated

.1.3.6.1.4.1.9.5.1.1.5 · 1 row entry · 3 columns

Open in standard view

The trap receiver table (0 to 20 entries). This
table lists the addresses of Network Management
Stations that should receive trap messages from
this entity when an exception condition occurs.
          
This table is deprecated and replaced by
trapDestTable and other tables in SNMP-TARGET-
MIB and SNMP-NOTIFICATION-MIB.

sysTrapReceiverEntry entry .1.3.6.1.4.1.9.5.1.1.5.1

A trap receiver table entry.

Indexes

sysTrapReceiverAddr

Column Syntax OID

sysTrapReceiverType deprecated

Setting this object to invalid(2) removes the
corresponding entry from the sysTrapReceiverTable.
To add a new entry to the sysTrapReceiverTable,
set this object to valid(1) for an IpAddress which
is not already in the t…

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.9.5.1.1.5.1.1

sysTrapReceiverAddr deprecated

IP address for trap receiver.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.1.5.1.2

sysTrapReceiverComm deprecated

Community string used for trap messages to this
trap receiver.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.9.5.1.1.5.1.3

sysCommunityTable

table deprecated

.1.3.6.1.4.1.9.5.1.1.6 · 1 row entry · 2 columns

Open in standard view

The community table (4 entries). This table lists
community strings and their access levels. When an
SNMP message is received by this entity, the
community string in the message is compared with
this table to determine access rights of the
sender.
          
Note that this item is only accessible when using
the community string defined in sysCommunityRwa.

sysCommunityEntry entry .1.3.6.1.4.1.9.5.1.1.6.1

A community table entry.

Indexes

sysCommunityAccess

Column Syntax OID

sysCommunityAccess deprecated

A value of readWriteAll(4) allows the community
to read and write all objects in the MIB. A
value of readWrite(3) allows the community to
read and write all objects except restricted
items such as community strings, whi…

Enumeration

Enumerated Values:

1	other
2	readOnly
3	readWrite
4	readWriteAll

.1.3.6.1.4.1.9.5.1.1.6.1.1

sysCommunityString deprecated

Configurable community string with access rights
defined by the value of sysCommunityAccess.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.9.5.1.1.6.1.2

sysFddiRingTable

table

.1.3.6.1.4.1.9.5.1.1.14 · 1 row entry · 3 columns

Open in standard view

The fddi ring map table. This table lists the
nodes in the FDDI ring(s) to which the system
belongs.

sysFddiRingEntry entry .1.3.6.1.4.1.9.5.1.1.14.1

A FDDI Ring table entry.

Indexes

sysFddiRingSMTIndex sysFddiRingAddress

Column	Syntax	OID
sysFddiRingSMTIndex The value of the SMT index associated with this ring.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.9.5.1.1.14.1.1`
sysFddiRingAddress The MAC address of this node in the FDDI ring.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.9.5.1.1.14.1.2`
sysFddiRingNext The MAC address of the next node in the FDDI ring.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.9.5.1.1.14.1.3`

sysTrafficMeterTable

table

.1.3.6.1.4.1.9.5.1.1.32 · 1 row entry · 4 columns

Open in standard view

The system traffic meter table. This table
lists the traffic meters available in the
system.

sysTrafficMeterEntry entry .1.3.6.1.4.1.9.5.1.1.32.1

A traffic meter table entry.

Indexes

sysTrafficMeterType

Column Syntax OID

sysTrafficMeterType

The type of traffic meter.

Enumeration

Enumerated Values:

1	systemSwitchingBus
2	switchingBusA
3	switchingBusB
4	switchingBusC

.1.3.6.1.4.1.9.5.1.1.32.1.1

sysTrafficMeter

Traffic meter value, i.e. the percentage of
bandwidth utilization for the previous polling
interval.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.9.5.1.1.32.1.2

sysTrafficMeterPeak

Peak traffic meter value since the system
started.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.9.5.1.1.32.1.3

sysTrafficMeterPeakTime

The time (in hundredths of a second) since the
peak traffic meter value occurred.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.1.32.1.4

chassisComponentTable

table deprecated

.1.3.6.1.4.1.9.5.1.2.18 · 1 row entry · 5 columns

Open in standard view

A list of the chassis related components in the
chassis.
          
This table is deprecated and replaced by
entPhysicalTable in ENTITY-MIB.

chassisComponentEntry entry .1.3.6.1.4.1.9.5.1.2.18.1

Entry containing information about one component
in the chassis.

Indexes

chassisComponentIndex

Column Syntax OID

chassisComponentIndex deprecated

A unique value for each chassis related component
within the chassis.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.5.1.2.18.1.1

chassisComponentType deprecated

The type of the chassis component.

Enumeration

Enumerated Values:

1	unknown
2	wsc6000cl
3	wsc6000vtt
4	wsc6000tempSensor
5	wsc6513Clock
6	clk7600
7	ws9SlotFan
8	fanMod9
10	wsc6506eFan
11	wsc6509eFan
13	wsc6503eFan
14	wsc6000vtte
15	fanMod4Hs
16	fan6524
17	fanMod6Shs
18	fanMod9Shs
19	fanMod9St
20	wsc6509veFan
21	fanMod3Hs
25	c6880xFan
26	c6807xlFan
27	c6800xl33vcon

.1.3.6.1.4.1.9.5.1.2.18.1.2

chassisComponentSerialNumber deprecated

The serial number of the chassis component.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.9.5.1.2.18.1.3

chassisComponentHwVersion deprecated

The hardware version of the chassis component.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.9.5.1.2.18.1.4

chassisComponentModel deprecated

The manufacturer's model number for the chassis
component.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.9.5.1.2.18.1.5

moduleTable

table

.1.3.6.1.4.1.9.5.1.3.1 · 1 row entry · 28 columns

Open in standard view

A list of module entries. The number of entries
is the number of modules in the chassis.

moduleEntry entry .1.3.6.1.4.1.9.5.1.3.1.1

Entry containing information about one module in
the chassis.

Indexes

moduleIndex

Column Syntax OID

moduleIndex

A unique value for each module within the
chassis.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.3.1.1.1

moduleType

The type of module.

Enumeration

Enumerated Values:

1	other
2	empty
3	wsc1000
4	wsc1001
5	wsc1100
11	wsc1200
12	wsc1400
13	wsx1441
14	wsx1444
15	wsx1450
16	wsx1483
17	wsx1454
18	wsx1455
19	wsx1431
20	wsx1465
21	wsx1436
22	wsx1434
23	wsx5009
24	wsx5013
25	wsx5011
26	wsx5010
27	wsx5113
28	wsx5101
29	wsx5103
30	wsx5104
32	wsx5155
33	wsx5154
34	wsx5153
35	wsx5111
36	wsx5213
37	wsx5020
38	wsx5006
39	wsx5005
40	wsx5509
41	wsx5506
42	wsx5505
43	wsx5156
44	wsx5157
45	wsx5158
46	wsx5030
47	wsx5114
48	wsx5223
49	wsx5224
50	wsx5012
52	wsx5302
53	wsx5213a
54	wsx5380
55	wsx5201
56	wsx5203
57	wsx5530
61	wsx5161
62	wsx5162
65	wsx5165
66	wsx5166
67	wsx5031
68	wsx5410
69	wsx5403
73	wsx5201r
74	wsx5225r
75	wsx5014
76	wsx5015
77	wsx5236
78	wsx5540
79	wsx5234
81	wsx5012a
82	wsx5167
83	wsx5239
84	wsx5168
85	wsx5305
87	wsx5550
88	wsf5541
91	wsx5534
92	wsx5536
96	wsx5237
200	wsx6ksup12ge
201	wsx6408gbic
202	wsx6224mmmt
203	wsx6248rj45
204	wsx6248tel
206	wsx6302msm
207	wsf6kmsfc
208	wsx6024flmt
209	wsx6101oc12mmf
210	wsx6101oc12smf
211	wsx6416gemt
212	wsx61822pa
213	osm2oc12AtmMM
214	osm2oc12AtmSI
216	osm4oc12PosMM
217	osm4oc12PosSI
218	osm4oc12PosSL
219	wsx6ksup1a2ge
220	wsx6302amsm
221	wsx6416gbic
222	wsx6224ammmt
223	wsx6380nam
224	wsx6248arj45
225	wsx6248atel
226	wsx6408agbic
229	wsx6608t1
230	wsx6608e1
231	wsx6624fxs
233	wsx6316getx
234	wsf6kmsfc2
235	wsx6324mmmt
236	wsx6348rj45
237	wsx6ksup22ge
238	wsx6324sm
239	wsx6516gbic
240	osm4geWanGbic
241	osm1oc48PosSS
242	osm1oc48PosSI
243	osm1oc48PosSL
244	wsx6381ids
245	wsc6500sfm
246	osm16oc3PosMM
247	osm16oc3PosSI
248	osm16oc3PosSL
249	osm2oc12PosMM
250	osm2oc12PosSI
251	osm2oc12PosSL
252	wsx650210ge
253	osm8oc3PosMM
254	osm8oc3PosSI
255	osm8oc3PosSL
258	wsx6548rj45
259	wsx6524mmmt
260	wsx6066SlbApc
261	wsx6516getx
265	osm2oc48OneDptSS
266	osm2oc48OneDptSI
267	osm2oc48OneDptSL
268	osm2oc48OneDptSSDual
269	osm2oc48OneDptSIDual
270	osm2oc48OneDptSLDual
271	wsx6816gbic
272	osm4choc12T3MM
273	osm4choc12T3SI
274	osm8choc12T3MM
275	osm8choc12T3SI
276	osm1choc48T3SS
277	osm2choc48T3SS
278	wsx6500sfm2
279	osm1choc48T3SI
280	osm2choc48T3SI
281	wsx6348rj21
282	wsx6548rj21
284	wsSvcCmm
285	wsx650110gex4
286	osm4oc3PosSI
289	osm4oc3PosMM
290	wsSvcIdsm2
291	wsSvcNam2
292	wsSvcFwm1
293	wsSvcCe1
294	wsSvcSsl1
295	osm8choc3DS0SI
296	osm4choc3DS0SI
297	osm1choc12T1SI
300	wsx4012
301	wsx4148rj
302	wsx4232gbrj
303	wsx4306gb
304	wsx4418gb
305	wsx44162gbtx
306	wsx4912gb
307	wsx2948gbrj
309	wsx2948
310	wsx4912
311	wsx4424sxmt
312	wsx4232rjxx
313	wsx4148rj21
317	wsx4124fxmt
318	wsx4013
319	wsx4232l3
320	wsx4604gwy
321	wsx44122Gbtx
322	wsx2980
323	wsx2980rj
324	wsx2980gbrj
325	wsx4019
326	wsx4148rj45v
330	wsx4424gbrj45
331	wsx4148fxmt
332	wsx4448gblx
334	wsx4448gbrj45
337	wsx4148lxmt
339	wsx4548gbrj45
340	wsx4548gbrj45v
341	wsx4248rj21v
342	wsx4302gb
343	wsx4248rj45v
345	wsx2948ggetx
346	wsx2948ggetxgbrj
502	wsx6516aGbic
503	wsx6148getx
506	wsx6148x2rj45
507	wsx6196rj21
509	wssup32ge3b
510	wssup3210ge3b
511	mec6524gs8s
512	mec6524gt8s
515	wssup32pge
516	wssup32p10ge
597	wssvcpisa32
598	me6524msfc2a
599	wsf6kmsfc2a
600	osm12ct3T1
601	osm12t3e3
602	osm24t3e3
603	osm4GeWanGbicPlus
604	osm1choc12T3SI
605	osm2choc12T3SI
606	osm2oc12AtmMMPlus
607	osm2oc12AtmSIPlus
608	osm2oc12PosMMPlus
609	osm2oc12PosSIPlus
610	osm16oc3PosSIPlus
611	osm1oc48PosSSPlus
612	osm1oc48PosSIPlus
613	osm1oc48PosSLPlus
614	osm4oc3PosSIPlus
615	osm8oc3PosSLPlus
616	osm8oc3PosSIPlus
617	osm4oc12PosSIPlus
618	c7600Es4Tg3cxl
620	c7600Es2Tg3cxl
625	c76EsXt4Tg3cxl
626	c76EsXt2Tg3cxl
627	c7600Es4Tg3c
629	c7600Es2Tg3c
633	c76EsXt4Tg3c
634	c76EsXt2Tg3c
903	wsSvcIpSec1
910	wsSvcMwam1
911	wsSvcCsg1
912	wsx6148rj45v
913	wsx6148rj21v
914	wsSvcNam1
915	wsx6548getx
919	wsSvcPsd1
920	wsx6066SlbSk9
921	wsx6148agetx
923	wsx6148arj45
924	wsSvcWlan1k9
925	wsSvcAon1k9
926	ace106500k9
927	wsSvcWebVpnk9
928	wsx6148FeSfp
929	wsSvcAdm1k9
930	wsSvcAgm1k9
936	ace046500k9
940	wsSvcSamiBb
946	wsSvcWism2k9
947	wsSvcAsaSm1
949	wsSvcNam3k9
950	wsSvcAsaSm1k7
951	wsSvcVse1k9
1001	wssup720
1002	wssup720base
1004	m7600Sip600
1007	wsx6748getx
1008	wsx670410ge
1009	wsx6748sfp
1010	wsx6724sfp
1016	wsx670810ge
1021	vss72010g
1023	wsx6708a10ge
1027	wsx671610ge
1031	vssup2t10g
1032	wsx6148ege45at
1033	wsx671610t
1034	wsx690810g
1035	wsx690440g
1036	wsx6148egetx
1037	wsx6848tx
1039	wsx6848sfp
1040	wsx6824sfp
1042	wsx681610ge
1043	wsx681610t
1101	wsx65822pa
1102	m7600Sip200
1103	m7600Sip400
1104	c7600ssc400
1105	c7600ssc600
1106	esm2x10ge
1301	c6800ia48td
1304	c6800ia48fpd
1400	c6880x16p10g
1401	c6880x
1402	c6880xle16p10g
1403	c6880xle
1800	rsp720
1801	rsp720base
1805	c7600msfc4

.1.3.6.1.4.1.9.5.1.3.1.1.2

moduleSerialNumber deprecated

The serial number of the module in a numeric
format. If the module uses an alphanumeric serial
number, this MIB object will return 0.

This object is deprecated and replaced by
entPhysicalSerialNum in ENTI…

Integer32

Constraints:
range: 0-999999999

.1.3.6.1.4.1.9.5.1.3.1.1.3

moduleHwHiVersion deprecated

The high part of the hardware version of the
module.
For example, if the hardware version is 3.1, the
value of moduleHwHiVersion is 3.

This object is deprecated and replaced by
entPhysicalHardwareRev in E…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.3.1.1.4

moduleHwLoVersion deprecated

The low part of the hardware version of the
module.
For example, if the hardware version is 3.1, the
value of moduleHwLoVersion is 1.

This object is deprecated and replaced by
entPhysicalHardwareRev in EN…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.3.1.1.5

moduleFwHiVersion deprecated

The high part of the firmware version number. For
example, if the firmware version is 3.1, the value
of moduleFwHiVersion is 3.

This object is deprecated and replaced by
entPhysicalFirmwareRev in ENTITY-M…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.3.1.1.6

moduleFwLoVersion deprecated

The low part of the firmware version number. For
example, if the firmware version is 3.1, the value
of moduleFwLoVersion is 1.

This object is deprecated and replaced by
entPhysicalFirmwareRev in ENTITY-MI…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.3.1.1.7

moduleSwHiVersion deprecated

The high part of the software version number. For
example, if the software version is 3.1, the value
of moduleSwHiVersion is 3.

This object is deprecated and replaced by
entPhysicalSoftwareRev in ENTITY-M…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.3.1.1.8

moduleSwLoVersion deprecated

The low part of the software version number. For
example, if the software version is 3.1, the value
of moduleSwLoVersion is 1.

This object is deprecated and replaced by
entPhysicalSoftwareRev in ENTITY-MI…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.3.1.1.9

moduleStatus

The operational status of the module. If the
status is not ok, the value of moduleTestResult
gives more detailed information about the
module's failure condition(s).

Enumeration

Enumerated Values:

1	other
2	ok
3	minorFault
4	majorFault

.1.3.6.1.4.1.9.5.1.3.1.1.10

moduleTestResult

The result of the module's self test. A zero
indicates that the module passed all tests. Bits
set in the result indicate error conditions.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.3.1.1.11

moduleAction

This object, when read, returns one of the
following results:
other(1): module permanently enabled
enable(3): module currently enabled
disable(4): module currently disabled
Setting this object to one of t…

Enumerationr/w

Enumerated Values:

1	other
2	reset
3	enable
4	disable

.1.3.6.1.4.1.9.5.1.3.1.1.12

moduleName

A descriptive string used by the network
administrator to name the module.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.9.5.1.3.1.1.13

moduleNumPorts

The number of ports supported by the module.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.9.5.1.3.1.1.14

modulePortStatus

A series of bytes containing status information
about the module and each of the ports on the
module.
The first byte contains the status for the module
(same value as moduleStatus), and subsequent bytes
contain status f…

OctetString

.1.3.6.1.4.1.9.5.1.3.1.1.15

moduleSubType

The type of daughterboard attached to this
module.

Enumeration

Enumerated Values:

1	other
2	empty
3	wsf5510
4	wsf5511
6	wsx5304
7	wsf5520
8	wsf5521
9	wsf5531
100	wsf6020
101	wsf6020a
102	wsf6kpfc
103	wsf6kpfc2
104	wsf6kvpwr
105	wsf6kdfc
106	wsf6kpfc2a
107	wsf6kdfca
200	vsp300dfc
201	wsf6kpfc3a
202	wsf6kdfc3a
203	wsf6700dfc3a
205	wsf6kdfc3bxl
206	wsf6kpfc3bxl
207	wsf6700dfc3bxl
208	wsf6700cfc
213	m7600pfc3c
216	wsf6kpfc3b
217	wsf6700dfc3b
218	wsf6700dfc3c
221	wsf6700dfc3cxl
223	wsf6kdfc3b
224	mec6524pfc3c
225	sip600earl
226	vsf6kpfc3cxl
227	vsf6kpfc3c
228	c7600esmdfc3cxl
229	vsf6kpfc4
230	c7600esmdfc3c
231	wsf6kdfc4exl
232	c7600Es3cxl
233	c7600Es3c
234	wsf6kdfc4e
235	vsf6kpfc4xl
236	wsf6kdfc4axl
237	wsf6kdfc4a
238	c6880xpfc
239	c6880xlepfc
240	c6880xdfc
241	c6880xledfc

.1.3.6.1.4.1.9.5.1.3.1.1.16

moduleModel

The manufacturer's model number for the module.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.9.5.1.3.1.1.17

moduleHwVersion

The hardware version of the module.

OctetString

Constraints:
range: 0-12

.1.3.6.1.4.1.9.5.1.3.1.1.18

moduleFwVersion

The firmware version of the module.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.9.5.1.3.1.1.19

moduleSwVersion

The software version of the module.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.9.5.1.3.1.1.20

moduleStandbyStatus

Redundant status of a module that supports
redundancy.

Enumeration

Enumerated Values:

1	other
2	active
3	standby
4	error

.1.3.6.1.4.1.9.5.1.3.1.1.21

moduleIPAddress

If the module has a separate IP address to
reach it by, then it is reported here.
Otherwise, this object has a value of
'00000000H'.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.3.1.1.22

moduleIPAddressVlan

If the moduleIPAddress is valid then this
object reports the VLAN to access that IP
address on. Otherwise this object has a value
of zero.

CISCO-VTP-MIBVlanIndex

Textual Convention: CISCO-VTP-MIBVlanIndex Integer32

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.9.5.1.3.1.1.23

moduleSubType2

The type of daughterboard attached to this
module.

Enumeration

Enumerated Values:

1	other
2	empty
3	wsu5531
5	wsu5533
6	wsu5534
7	wsu5535
8	wsu5536
9	wsu5537
10	wsu5538
11	wsu5539
102	wsg6488
103	wsg6489
104	wsg6483
105	wsg6485
106	wsf6kFe48af
107	wsf6kGe48af
108	wsf6kVpwrGe
109	wsf6kFe48x2af
207	wsf6kmsfc
234	wsf6kmsfc2
314	wsu4504fxmt
315	wsu4502gb
402	wssvcidsupg
403	wssvccmm6e1
404	wssvccmm6t1
405	wssvccmm24fxs
406	wssvccmmact
410	aceModExpnDc
411	wsSvcAppProc1
597	wssvcpisa32
598	me6524msfc2a
599	wsf6kmsfc2a
618	c7600Es4Tg
620	c7600Es2Tg
625	c7600EsItu4TgLk
626	c7600EsItu2TgLk
1001	wssup720
1005	vsf6kmsfc5
1026	vsf6kmsfc3
1701	esm2x10ge
1805	c7600msfc4

.1.3.6.1.4.1.9.5.1.3.1.1.24

moduleSlotNum

This value is determined by the chassis slot
number where the module is located. Valid entries
are 1 to the value of chassisNumSlots

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.3.1.1.25

moduleSerialNumberString

The serial number of the module. This MIB object
will return the module serial number for any
module that either a numeric or an alphanumeric
serial number is being used.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.9.5.1.3.1.1.26

moduleEntPhysicalIndex

The value of the instance of the entPhysicalIndex
object, defined in ENTITY-MIB, for the entity
physical index corresponding to this module.

ENTITY-MIBPhysicalIndex

Textual Convention: ENTITY-MIBPhysicalIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.9.5.1.3.1.1.27

moduleAdditionalStatus

The additional status of the module.

fruInstalled(0) indicates that whether or not
FRU is installed on the module.

powerDenied(1) indicates that whether phones
connected to the ports of thi…

Bits

Enumerated Values:

0	fruInstalled
1	powerDenied
2	faulty

.1.3.6.1.4.1.9.5.1.3.1.1.28

portTable

table

.1.3.6.1.4.1.9.5.1.4.1 · 1 row entry · 26 columns

Open in standard view

A list of port entries. The number of entries is
determined by the number of modules in the chassis
and the number of ports on each module.

portEntry entry .1.3.6.1.4.1.9.5.1.4.1.1

Entry containing information for a particular
port on a module.

Indexes

portModuleIndex portIndex

Column Syntax OID

portModuleIndex

An index value that uniquely identifies the
module where this port is located.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.4.1.1.1

portIndex

An index value that uniquely identifies this port
within a module. The value is determined by the
location of the port on the module. Valid entries
are 1 to the value of moduleNumPorts for this
module.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.4.1.1.2

portCrossIndex

A cross-reference to the port's index within
another mib group. The value is dependent on the
type of port. For an FDDI port, this corresponds
to the snmpFddiPORTIndex.

Integer32

Constraints:
range: 1-4080

.1.3.6.1.4.1.9.5.1.4.1.1.3

portName

A descriptive string used by the network
administrator to name the port.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.9.5.1.4.1.1.4

portType

The type of physical layer medium dependent
interface on the port.

Enumeration

Enumerated Values:

1	other
2	cddi
3	fddi
4	tppmd
5	mlt3
6	sddi
7	smf
8	e10BaseT
9	e10BaseF
10	scf
11	e100BaseTX
12	e100BaseT4
13	e100BaseF
14	atmOc3mmf
15	atmOc3smf
16	atmOc3utp
17	e100BaseFsm
18	e10a100BaseTX
19	mii
20	vlanRouter
21	remoteRouter
22	tokenring
23	atmOc12mmf
24	atmOc12smf
25	atmDs3
26	tokenringMmf
27	e1000BaseLX
28	e1000BaseSX
29	e1000BaseCX
30	networkAnalysis
31	e1000Empty
32	e1000BaseLH
33	e1000BaseT
34	e1000UnsupportedGbic
35	e1000BaseZX
36	depi2
37	t1
38	e1
39	fxs
40	fxo
41	transcoding
42	conferencing
43	atmOc12mm
44	atmOc12smi
45	atmOc12sml
46	posOc12mm
47	posOc12smi
48	posOc12sml
49	posOc48sms
50	posOc48smi
51	posOc48sml
52	posOc3mm
53	posOc3smi
54	posOc3sml
55	intrusionDetect
56	e10GBaseCPX
57	e10GBaseLX4
59	e10GBaseEX4
60	e10GEmpty
61	e10a100a1000BaseT
62	dptOc48mm
63	dptOc48smi
64	dptOc48sml
65	e10GBaseLR
66	chOc12smi
67	chOc12mm
68	chOc48ss
69	chOc48smi
70	e10GBaseSX4
71	e10GBaseER
72	contentEngine
73	ssl
74	firewall
75	vpnIpSec
76	ct3
77	e1000BaseCwdm1470
78	e1000BaseCwdm1490
79	e1000BaseCwdm1510
80	e1000BaseCwdm1530
81	e1000BaseCwdm1550
82	e1000BaseCwdm1570
83	e1000BaseCwdm1590
84	e1000BaseCwdm1610
85	e1000BaseBT
86	e1000BaseUnapproved
87	chOc3smi
88	mcr
89	coe
90	mwa
91	psd
92	e100BaseLX
93	e10GBaseSR
94	e10GBaseCX4
95	e10GBaseWdm1550
96	e10GBaseEdc1310
97	e10GBaseSW
98	e10GBaseLW
99	e10GBaseEW
100	lwa
101	aons
102	sslVpn
103	e100BaseEmpty
104	adsm
105	agsm
106	aces
109	intrusionProtect
110	e1000BaseSvc
111	e10GBaseSvc
113	e40GBaseEmpty
1000	e1000BaseUnknown
1001	e10GBaseUnknown
1002	e10GBaseUnapproved
1003	e1000BaseWdmRxOnly
1004	e1000BaseDwdm3033
1005	e1000BaseDwdm3112
1006	e1000BaseDwdm3190
1007	e1000BaseDwdm3268
1008	e1000BaseDwdm3425
1009	e1000BaseDwdm3504
1010	e1000BaseDwdm3582
1011	e1000BaseDwdm3661
1012	e1000BaseDwdm3819
1013	e1000BaseDwdm3898
1014	e1000BaseDwdm3977
1015	e1000BaseDwdm4056
1016	e1000BaseDwdm4214
1017	e1000BaseDwdm4294
1018	e1000BaseDwdm4373
1019	e1000BaseDwdm4453
1020	e1000BaseDwdm4612
1021	e1000BaseDwdm4692
1022	e1000BaseDwdm4772
1023	e1000BaseDwdm4851
1024	e1000BaseDwdm5012
1025	e1000BaseDwdm5092
1026	e1000BaseDwdm5172
1027	e1000BaseDwdm5252
1028	e1000BaseDwdm5413
1029	e1000BaseDwdm5494
1030	e1000BaseDwdm5575
1031	e1000BaseDwdm5655
1032	e1000BaseDwdm5817
1033	e1000BaseDwdm5898
1034	e1000BaseDwdm5979
1035	e1000BaseDwdm6061
1036	e10GBaseWdmRxOnly
1037	e10GBaseDwdm3033
1038	e10GBaseDwdm3112
1039	e10GBaseDwdm3190
1040	e10GBaseDwdm3268
1041	e10GBaseDwdm3425
1042	e10GBaseDwdm3504
1043	e10GBaseDwdm3582
1044	e10GBaseDwdm3661
1045	e10GBaseDwdm3819
1046	e10GBaseDwdm3898
1047	e10GBaseDwdm3977
1048	e10GBaseDwdm4056
1049	e10GBaseDwdm4214
1050	e10GBaseDwdm4294
1051	e10GBaseDwdm4373
1052	e10GBaseDwdm4453
1053	e10GBaseDwdm4612
1054	e10GBaseDwdm4692
1055	e10GBaseDwdm4772
1056	e10GBaseDwdm4851
1057	e10GBaseDwdm5012
1058	e10GBaseDwdm5092
1059	e10GBaseDwdm5172
1060	e10GBaseDwdm5252
1061	e10GBaseDwdm5413
1062	e10GBaseDwdm5494
1063	e10GBaseDwdm5575
1064	e10GBaseDwdm5655
1065	e10GBaseDwdm5817
1066	e10GBaseDwdm5898
1067	e10GBaseDwdm5979
1068	e10GBaseDwdm6061
1069	e1000BaseBX10D
1070	e1000BaseBX10U
1071	e100BaseUnknown
1072	e100BaseUnapproved
1073	e100BaseSX
1074	e100BaseBX10D
1075	e100BaseBX10U
1076	e10GBaseBad
1077	e10GBaseZR
1078	e100BaseEX
1079	e100BaseZX
1080	e10GBaseLRM
1081	e10GBaseTPluggable
1082	e10GBaseCU1M
1083	e10GBaseCU3M
1084	e10GBaseCU5M
1085	e10GBaseCU7M
1086	e10GBaseCUdot3M
1087	e10GBaseCU2M
1088	e10GBaseCU4M
1089	e10GBaseCU6M
1090	e10GBaseUSR
1091	e10GBaseLRMSM
1092	e1000BaseDwdm3346
1093	e1000BaseDwdm3739
1094	e1000BaseDwdm4134
1095	e1000BaseDwdm4532
1096	e1000BaseDwdm4931
1097	e1000BaseDwdm5332
1098	e1000BaseDwdm5736
1099	e1000BaseDwdm6141
1100	e40GBaseLR
1101	e40GBaseSR
1102	e40GBaseUnapproved
1104	e10GBaseDwdm3347
1105	e10GBaseDwdm3740
1106	e10GBaseDwdm4135
1107	e10GBaseDwdm4532
1108	e10GBaseDwdm4932
1109	e10GBaseDwdm5333
1110	e10GBaseDwdm5736
1111	e10GBaseDwdm6141
1112	e10GBaseACU7M
1113	e10GBaseACU10M
1114	e1000BaseEXSMD
1115	e1000BaseZXSMD
1116	e1000BaseTE
1117	e1000BaseSXMMD
1118	e1000BaseLHSMD
1119	e100BaseFXGE

.1.3.6.1.4.1.9.5.1.4.1.1.5

portOperStatus

The current operational status of the port.

Enumeration

Enumerated Values:

1	other
2	ok
3	minorFault
4	majorFault

.1.3.6.1.4.1.9.5.1.4.1.1.6

portCrossGroupIndex

A cross-reference to another mib group for this
port. The value is dependent on the type of port.
For an FDDI port this corresponds to the
snmpFddiPORTSMTIndex.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.4.1.1.7

portAdditionalStatus

Additional status information for the port. The
value is a sum. It initially takes the value zero,
then for each state that is true, 2 raised to a
power is added to the sum. The powers are
according to the following tab…

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.9.5.1.4.1.1.8

portAdminSpeed

The desired speed of the port.
The current operational speed of the port can be
determined from ifSpeed.

Enumerationr/w

Enumerated Values:

1	autoDetect
2	autoDetect10100
10	s10G
64000	s64000
1544000	s1544000
2000000	s2000000
2048000	s2048000
4000000	s4000000
10000000	s10000000
16000000	s16000000
45000000	s45000000
64000000	s64000000
100000000	s100000000
155000000	s155000000
400000000	s400000000
622000000	s622000000
1000000000	s1000000000

.1.3.6.1.4.1.9.5.1.4.1.1.9

portDuplex

Indicates whether the port is operating in half-
duplex, full-duplex, disagree or auto negotiation
mode. If the port could not agree with the far end
on port duplex, the port will be in disagree(3)
mode.

Enumerationr/w

Enumerated Values:

1	half
2	full
3	disagree
4	auto

.1.3.6.1.4.1.9.5.1.4.1.1.10

portIfIndex

The value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to this port.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.9.5.1.4.1.1.11

portSpantreeFastStart deprecated

Indicates whether the port is operating in
spantree fast start mode. A port with fast start
enabled is immediately put in spanning tree
forwarding state on link up, rather than starting
in blocking state which is the no…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.5.1.4.1.1.12

portAdminRxFlowControl

Indicates the receive flow control administrative
status set on the port. If the status is set to
on(1), the port will require the far end to send
flow control. If the status is set to off(2), the
port will not allow fa…

Enumerationr/w

Enumerated Values:

1	on
2	off
3	desired

.1.3.6.1.4.1.9.5.1.4.1.1.13

portOperRxFlowControl

Indicates the receive flow control operational
status of the port. If the port could not agree
with the far end on a link protocol, its
operational status will be disagree(3).

Enumeration

Enumerated Values:

1	on
2	off
3	disagree

.1.3.6.1.4.1.9.5.1.4.1.1.14

portAdminTxFlowControl

Indicates the transmit flow control
administrative status set on the port.
If the status is set to on(1), the port will send
flow control to the far end.
If the status is set to off(2), the port will not
send flow contr…

Enumerationr/w

Enumerated Values:

1	on
2	off
3	desired

.1.3.6.1.4.1.9.5.1.4.1.1.15

portOperTxFlowControl

Indicates the transmit flow control operational
status of the port. If the port could not agree
with the far end on a link protocol, its
operational status will be disagree(3).

Enumeration

Enumerated Values:

1	on
2	off
3	disagree

.1.3.6.1.4.1.9.5.1.4.1.1.16

portMacControlTransmitFrames

The total number of MAC control frames passed to
the MAC sublayer for transmission.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.4.1.1.17

portMacControlReceiveFrames

The total number of MAC control frames passed by
the MAC sublayer to the MAC Control sublayer on
receive.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.4.1.1.18

portMacControlPauseTransmitFrames

The total number of PAUSE frames passed to
the MAC sublayer for transmission.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.4.1.1.19

portMacControlPauseReceiveFrames

The total number of PAUSE frames passed by
the MAC sublayer to the MAC Control sublayer
on receive.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.4.1.1.20

portMacControlUnknownProtocolFrames

The total number of MAC Control frames received
with an opcode that is not supported by the
device.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.4.1.1.21

portLinkFaultStatus

Specifies additional link fault status on a
gigabit link.

noFault:
Link is up and operational.
nearEndFault:
The port is enabled but there is no GBIC
present or the local port cann…

Enumeration

Enumerated Values:

1	noFault
2	nearEndFault
3	nearEndConfigFail
4	farEndDisable
5	farEndFault
6	farEndConfigFail
7	notApplicable

.1.3.6.1.4.1.9.5.1.4.1.1.22

portAdditionalOperStatus

The current operational status of the port which
is showing additional detailed information of the
port.

Bits

Enumerated Values:

0	other
1	connected
2	standby
3	faulty
4	notConnected
5	inactive
6	shutdown
7	dripDis
8	disabled
9	monitor
10	errdisable
11	linkFaulty
12	onHook
13	offHook
14	reflector

.1.3.6.1.4.1.9.5.1.4.1.1.23

portInlinePowerDetect

Indicate if the port detects an inline power capable
device connected to it.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.5.1.4.1.1.24

portEntPhysicalIndex

The value of the instance of the entPhysicalIndex
object, defined in ENTITY-MIB, for the
entity physical index corresponding to this port.

ENTITY-MIBPhysicalIndex

Textual Convention: ENTITY-MIBPhysicalIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.9.5.1.4.1.1.25

portErrDisableTimeOutEnable

Indicates whether a port that is put into
errdisable state by a cause as specified by
sysErrDisableTimeoutEnable will be re-enabled
automatically during the timeout interval as
specified by sysErrDisableTimeoutInterval.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.5.1.4.1.1.26

brouterPortTable

table

.1.3.6.1.4.1.9.5.1.6.14 · 1 row entry · 8 columns

Open in standard view

A list of brouter port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each
module.

brouterPortEntry entry .1.3.6.1.4.1.9.5.1.6.14.1

Entry containing bridge/router information for a
particular port on a module.

Indexes

brouterPortModule brouterPort

Column	Syntax	OID
brouterPortModule An index value that uniquely identifies the module index where this port is located.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.9.5.1.6.14.1.1`
brouterPort An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.9.5.1.6.14.1.2`
brouterPortIpVlan The IP Virtual LAN to which this port belongs.	CISCO-VTP-MIBVlanIndexr/w Textual Convention: CISCO-VTP-MIBVlanIndex `Integer32` Type Constraints: `range: 0..4095`	`.1.3.6.1.4.1.9.5.1.6.14.1.3`
brouterPortIpAddr This port's IP address.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.9.5.1.6.14.1.4`
brouterPortNetMask This port's subnet mask.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.9.5.1.6.14.1.5`
brouterPortBroadcast This port's broadcast address.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.9.5.1.6.14.1.6`
brouterPortBridgeVlan The bridge Virtual LAN to which this port belongs.	Integer32r/w Constraints: `range: 0-1023`	`.1.3.6.1.4.1.9.5.1.6.14.1.7`
brouterPortIpHelpers An indication of which other Virtual LANs UDP/IP broadcasts received on this port will be forwarded to. The normal situation is broadcasts NOT forwarded beyond the originating VLAN, but it can be useful in certain circu…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.9.5.1.6.14.1.8`

filterMacTable

table

.1.3.6.1.4.1.9.5.1.7.1 · 1 row entry · 4 columns

Open in standard view

A list of filter mac entries.

filterMacEntry entry .1.3.6.1.4.1.9.5.1.7.1.1

Entry containing MAC address filter information.

Indexes

filterMacModule filterMacPort filterMacAddress

Column Syntax OID

filterMacModule

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.7.1.1.1

filterMacPort

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.7.1.1.2

filterMacAddress

A MAC address. If the source or destination MAC
address equals this value, a match occurs. The
packet is dropped if a match occurs and deny(1)
was specified. The packet is dropped if a match
doesn't occur and at least o…

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.9.5.1.7.1.1.3

filterMacType

Setting this object to invalid(2) removes the
corresponding entry from the filterMacTable.
To add a new entry to the filterMacTable, set this
object to deny(1) or any value from permit(3) to
denySrcLearn(8) for a module…

Enumerationr/w

Enumerated Values:

1	deny
2	invalid
3	permit
4	permitSrc
5	permitDst
6	denySrc
7	denyDst
8	denySrcLearn

.1.3.6.1.4.1.9.5.1.7.1.1.4

filterVendorTable

table

.1.3.6.1.4.1.9.5.1.7.2 · 1 row entry · 4 columns

Open in standard view

A list of filter vendor ID entries.

filterVendorEntry entry .1.3.6.1.4.1.9.5.1.7.2.1

Entry containing vendor ID filter information.

Indexes

filterVendorModule filterVendorPort filterVendorId

Column Syntax OID

filterVendorModule

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.7.2.1.1

filterVendorPort

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.7.2.1.2

filterVendorId

The vendor ID portion of a MAC address. If the
source or destination MAC address has the same
vendor ID, a match occurs. The packet is dropped
if a match occurs and deny(1) was specified. The
packet is dropped if a matc…

VendorIdType

Textual Convention: VendorIdType OctetString

Type Constraints:
range: 3

.1.3.6.1.4.1.9.5.1.7.2.1.3

filterVendorType

Setting this object to invalid(2) removes the
corresponding entry from the filterVendorTable.
To add a new entry to the filterVendorTable, set
this object to deny(1) or permit(3) for a module,
port, and vendor ID not al…

Enumerationr/w

Enumerated Values:

1	deny
2	invalid
3	permit

.1.3.6.1.4.1.9.5.1.7.2.1.4

filterProtocolTable

table

.1.3.6.1.4.1.9.5.1.7.3 · 1 row entry · 4 columns

Open in standard view

A list of filter protocol entries.

filterProtocolEntry entry .1.3.6.1.4.1.9.5.1.7.3.1

Entry containing PROTOCOL address filter
information.

Indexes

filterProtocolModule filterProtocolPort filterProtocolValue

Column Syntax OID

filterProtocolModule

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.7.3.1.1

filterProtocolPort

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.7.3.1.2

filterProtocolValue

A 16-bit protocol value. If the packet's type
field or the packet's DSAP/SSAP field is equal to
this value, a match occurs. The packet is dropped
if a match occurs and deny(1) was specified. The
packet is dropped if a m…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.7.3.1.3

filterProtocolType

Setting this object to invalid(2) removes the
corresponding entry from the filterProtocolTable.
To add a new entry to the filterProtocolTable, set
this object to deny(1) or permit(3) for a module,
port, and protocol val…

Enumerationr/w

Enumerated Values:

1	deny
2	invalid
3	permit

.1.3.6.1.4.1.9.5.1.7.3.1.4

filterTestTable

table

.1.3.6.1.4.1.9.5.1.7.4 · 1 row entry · 7 columns

Open in standard view

A list of filter test entries.

filterTestEntry entry .1.3.6.1.4.1.9.5.1.7.4.1

Entry containing test filter information.

Indexes

filterTestModule filterTestPort filterTestIndex

Column Syntax OID

filterTestModule

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.7.4.1.1

filterTestPort

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.7.4.1.2

filterTestIndex

An index value that uniquely identifies a test
for a particular module/port.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.9.5.1.7.4.1.3

filterTestType

Setting this object to invalid(2) removes the
corresponding entry from the filterTestTable. To
add a new entry to the filterTestTable, set this
object to valid(1) for a module, port, and test
index not already in the ta…

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.9.5.1.7.4.1.4

filterTestOffset

A byte offset into packet. Must be a 32-bit word
aligned offset, i.e. 0, 4, 8, etc.

Integer32r/w

Constraints:
range: 0-4500

.1.3.6.1.4.1.9.5.1.7.4.1.5

filterTestValue

A 32-bit value to be compared against the packet
location specified by filterTestOffset.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.9.5.1.7.4.1.6

filterTestMask

A 32-bit value to be bitwise ANDed with the
packet location specified by filterTestOffset
before being compared to filterTestValue.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.9.5.1.7.4.1.7

filterPortTable

table

.1.3.6.1.4.1.9.5.1.7.5 · 1 row entry · 9 columns

Open in standard view

A list of filter port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each
module.

filterPortEntry entry .1.3.6.1.4.1.9.5.1.7.5.1

Entry containing filter information for a
particular port on a module.

Indexes

filterPortModule filterPort

Column Syntax OID

filterPortModule

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.7.5.1.1

filterPort

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.7.5.1.2

filterPortComplex

A complex expression made up of the numbers 1
through 8 indicating test results from
filterTestIndex and using logical operators '&'
(and), '|' (or), '!' (not), and parenthesis. For
example: ((1 & 2) | !3). If this comp…

OctetStringr/w

Constraints:
range: 0-50

.1.3.6.1.4.1.9.5.1.7.5.1.3

filterPortBroadcastThrottle

The maximum number of broadcast packets per
second allowed on this port. If the number of
incoming broadcast packets in a one second
interval exceeds this amount, packets are
dropped for the rest of the interval. If the…

Integer32r/w

Constraints:
range: 0-150000

.1.3.6.1.4.1.9.5.1.7.5.1.4

filterPortBroadcastThreshold

Indicates the integer part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterPortBroadcastThresholdFraction indicates t…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.9.5.1.7.5.1.5

filterPortBroadcastDiscards

The number of packets discarded due to traffic
suppression on this port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.7.5.1.6

filterPortBroadcastThresholdFraction

Indicates the fraction part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterPortBroadcastThreshold indicates the inte…

one-hundredthsInteger32r/w

Constraints:
range: 0-99

.1.3.6.1.4.1.9.5.1.7.5.1.7

filterPortSuppressionOption

Indicates the traffic types that traffic
suppression feature is enabled for.

multicast(0) is set when multicast suppression is
enabled. unicast(1) is set when unicast
suppression is enabled. broadcast(2) …

Bitsr/w

Enumerated Values:

0	multicast
1	unicast
2	broadcast

.1.3.6.1.4.1.9.5.1.7.5.1.8

filterPortSuppressionViolation

Indicates the action that will be taken on this
port when the percentage of either broadcast,
multicast or unicast traffic exceeds the limit as
indicated by filterPortBroadcastThreshold and
filterPortBroadcastThresholdF…

Enumerationr/w

Enumerated Values:

1	dropPackets
2	errdisable

.1.3.6.1.4.1.9.5.1.7.5.1.9

vlanTable

table deprecated

.1.3.6.1.4.1.9.5.1.9.2 · 1 row entry · 3 columns

Open in standard view

A list of Virtual LAN entries. The number of
entries is determined by the number of VLANs
supported by the system.

vlanEntry entry .1.3.6.1.4.1.9.5.1.9.2.1

Entry containing information for a particular
Virtual LAN.

Indexes

vlanIndex

Column Syntax OID

vlanIndex deprecated

An index value that uniquely identifies the
Virtual LAN associated with this information.

CISCO-VTP-MIBVlanIndex

Textual Convention: CISCO-VTP-MIBVlanIndex Integer32

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.9.5.1.9.2.1.1

vlanSpantreeEnable deprecated

Indicates whether Spanning Tree protocol is
enabled for this Virtual LAN.

If the device only supports a single global
Spanning Tree PVST+ Protocol enable/disable
for all the existing VLANs, then the objec…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.9.5.1.9.2.1.2

vlanIfIndex deprecated

The value of the ifIndex object defined in
MIB-II, for the interface corresponding to this
VLAN.

This object is deprecated and replaced by
vtpVlanIfIndex in CISCO-VTP-MIB.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.9.5.1.9.2.1.3

vlanPortTable

table

.1.3.6.1.4.1.9.5.1.9.3 · 1 row entry · 11 columns

Open in standard view

A list of Virtual LAN port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each
module.

vlanPortEntry entry .1.3.6.1.4.1.9.5.1.9.3.1

Entry containing Virtual LAN information for a
particular port on a module.

Indexes

vlanPortModule vlanPort

Column Syntax OID

vlanPortModule

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.9.3.1.1

vlanPort

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.9.3.1.2

vlanPortVlan

The Virtual LAN to which this port belongs.

CISCO-VTP-MIBVlanIndexr/w

Textual Convention: CISCO-VTP-MIBVlanIndex Integer32

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.9.5.1.9.3.1.3

vlanPortIslVlansAllowed

An indication of which Virtual LANs are allowed
on this Inter-Switch Link. This is an octet string
value with bits set to indicate allowed VLANs. It
can be interpreted as a sum of f(x) as x goes from
0 to 1023, where f(…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.9.5.1.9.3.1.5

vlanPortSwitchLevel

Indicates the priority level the port uses to
access the switching media. If vlanPortSwitchLevel
is not applicable to the port, notApplicable(3)
will be returned by the device.

Enumerationr/w

Enumerated Values:

1	normal
2	high
3	notApplicable

.1.3.6.1.4.1.9.5.1.9.3.1.6

vlanPortIslAdminStatus

Indicates the administrative status set on the
trunk port while the operational status is the one
that indicates whether the port is actually
trunking or not. If the status is set to off(2),
the port is permanently set …

Enumerationr/w

Enumerated Values:

1	on
2	off
3	desirable
4	auto
5	onNoNegotiate

.1.3.6.1.4.1.9.5.1.9.3.1.7

vlanPortIslOperStatus

Indicates if the port is actually trunking or
not. In the case of ISL capable ports, the status
depends on the success or failure of the
negotiation process initiated by the port to
become a trunk or non trunk.
In the c…

Enumeration

Enumerated Values:

1	trunking
2	notTrunking

.1.3.6.1.4.1.9.5.1.9.3.1.8

vlanPortIslPriorityVlans

An indication of which Virtual LANs have a better
dot1dStpPortPriority value. This object can be
used to perform load balancing on Inter-Switch
Links via spanning tree. An Inter-Switch Link has
two dot1dStpPortPriority …

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.9.5.1.9.3.1.9

vlanPortAdminStatus

Indicates whether the port will get assigned to a
VLAN statically or dynamically. When it is set to
dynamic, the needed information will be accessed
from one of the Vlan Membership Policy Servers
specified in the vmpsTa…

Enumerationr/w

Enumerated Values:

1	static
2	dynamic

.1.3.6.1.4.1.9.5.1.9.3.1.10

vlanPortOperStatus

An indication of the current VLAN status of the
port.
A status of inactive(1) indicates that a dynamic
port does not yet have a VLAN assigned or that a
static or dynamic port has been assigned a VLAN
that is not current…

Enumeration

Enumerated Values:

1	inactive
2	active
3	shutdown
4	vlanActiveFault

.1.3.6.1.4.1.9.5.1.9.3.1.11

vlanPortAuxiliaryVlan deprecated

The Voice Virtual Vlan ID (VVID) to which this
port belongs to.
If the VVID is not supported on the port, this MIB
object will not be configurable and will return
4096.

Setting this MIB object to 4096, th…

Integer32r/w

Constraints:
range: 0-1000
range: 1025-4096

.1.3.6.1.4.1.9.5.1.9.3.1.12

vmpsTable

table

.1.3.6.1.4.1.9.5.1.9.4 · 1 row entry · 2 columns

Open in standard view

This table lists a maximum of 3 IP addresses of
Vlan Membership Policy Servers.

vmpsEntry entry .1.3.6.1.4.1.9.5.1.9.4.1

A VMPS table entry.

Indexes

vmpsAddr

Column Syntax OID

vmpsAddr

The IP address of a Vlan Membership Policy
Server. To configure the internal VMPS, use the
same IP address as specified in sysIpAddr.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.9.4.1.1

vmpsType

To add a new entry to the vmpsTable, set this
object to primary(2) or other(3) for an IP address
which is not already in the table. The primary
entry will be used first, if it is reachable.
Otherwise one of the other en…

Enumerationr/w

Enumerated Values:

1	invalid
2	primary
3	other

.1.3.6.1.4.1.9.5.1.9.4.1.2

vlanTrunkMappingTable

table

.1.3.6.1.4.1.9.5.1.9.8 · 1 row entry · 5 columns

Open in standard view

This table contains zero or more rows of trunk
VLAN to VLAN associations. The maximum number of
active entries is determined by
vlanTrunkMappingMax.
          
VLAN above 1k can not be created if the value of
corresponding instance of vlanTrunkMappingType is
dot1qToisl(2).

vlanTrunkMappingEntry entry .1.3.6.1.4.1.9.5.1.9.8.1

Information about the VLAN mapping of a
particular trunk VLAN to another VLAN.

Indexes

vlanTrunkMappingFromVlan

Column Syntax OID

vlanTrunkMappingFromVlan

The VLAN with this VLAN ID will be mapped to the
VLAN in the corresponding instance of
vlanTrunkMappingToVlan in the device.

Agent returns inconsistentValue if this VLAN
exists in the device.
…

CISCO-VTP-MIBVlanIndex

Textual Convention: CISCO-VTP-MIBVlanIndex Integer32

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.9.5.1.9.8.1.1

vlanTrunkMappingToVlan

The VLAN which the corresponding instance of
vlanTrunkMappingFromVlan will be mapped to.

Agent returns inconsistentValue if this VLAN
exists in the device.

Agent returns inconsistentValue i…

CISCO-VTP-MIBVlanIndexr/w

Textual Convention: CISCO-VTP-MIBVlanIndex Integer32

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.9.5.1.9.8.1.2

vlanTrunkMappingType

The type of this trunk VLAN mapping.

reservedToNonReserved(1)
An user defined association which maps a
reserved VLAN to a non-reserved VLAN.

dot1qToisl(2)
An user defined associ…

Enumerationr/w

Enumerated Values:

1	reservedToNonReserved
2	dot1qToisl

.1.3.6.1.4.1.9.5.1.9.8.1.3

vlanTrunkMappingOper

Indicates whether this VLAN mapping is effective
or not.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.5.1.9.8.1.4

vlanTrunkMappingStatus

The status of this trunk VLAN mapping.

Once a row becomes active, value in any other
column within such row cannot be modified except
by setting vlanTrunkMappingStatus to
notInService(2) for such row.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.5.1.9.8.1.5

portSecurityTable

table

.1.3.6.1.4.1.9.5.1.10.1 · 1 row entry · 10 columns

Open in standard view

A list of port security entries. The number of
entries is determined by the number of ports in
the system which support the Security feature.

portSecurityEntry entry .1.3.6.1.4.1.9.5.1.10.1.1

Entry containing security information for a
particular port.

Indexes

portSecurityModuleIndex portSecurityPortIndex

Column Syntax OID

portSecurityModuleIndex

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.10.1.1.1

portSecurityPortIndex

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.10.1.1.2

portSecurityAdminStatus

When security is enabled, source MAC addresses
are monitored for all packets received on the
port. If an address is detected that does not
match the portSecuritySecureSrcAddr and any
corresponding portSecurityExtSecureS…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.5.1.10.1.1.3

portSecurityOperStatus

An indication of whether the port has been shut
down as a result of an insecure address being
detected on a secure port.

Enumeration

Enumerated Values:

1	notShutdown
2	shutdown

.1.3.6.1.4.1.9.5.1.10.1.1.4

portSecurityLastSrcAddr

The last source MAC address in a receive packet
seen on the port.

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.9.5.1.10.1.1.5

portSecuritySecureSrcAddr

The address to be compared with source MAC
addresses of received packets when the
portSecurityAdminStatus is enabled(1). Setting
this value to 0.0.0.0.0.0 puts the port in
learning mode so that the next source MAC
addre…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.9.5.1.10.1.1.6

portSecurityMaxSrcAddr

The maximum number (N) of MAC address to be
secured on the port. The first N MAC addresses
learned or configured are made secured. If the
user wants to make the port secured for more than
one MAC address, the portSecuri…

Integer32r/w

Constraints:
range: 1-1025

.1.3.6.1.4.1.9.5.1.10.1.1.7

portSecurityAgingTime

The interval in which the port is secured. After
the expiration of the time, the corresponding
portSecuritySecureSrcAddr or
portSecurityExtSecureSrcAddr will be removed from
the secure address list. If the value of this…

minutesInteger32r/w

Constraints:
range: 0-0
range: 10-1440

.1.3.6.1.4.1.9.5.1.10.1.1.8

portSecurityShutdownTimeOut

The interval in which the port is shutdown due to
the violation of security. After the expiration
of the time all the security configuration of this
port is re-installed and the port is enabled. If
the value of this obj…

minutesInteger32r/w

Constraints:
range: 0-0
range: 10-1440

.1.3.6.1.4.1.9.5.1.10.1.1.9

portSecurityViolationPolicy

If the value of this object is
restrict(1) - the port drops all packets with
insecured addresses.
shutdown(2) - the port is forced to shut down
if there is a violation of
s…

Enumerationr/w

Enumerated Values:

1	restrict
2	shutdown

.1.3.6.1.4.1.9.5.1.10.1.1.10

portSecurityExtTable

table

.1.3.6.1.4.1.9.5.1.10.2 · 1 row entry · 4 columns

Open in standard view

A list of port security entries. The number of
entries is determined by the number of ports in
the system which support the Security feature and
the number of MAC addresses learned/configured to
be secured per port.

portSecurityExtEntry entry .1.3.6.1.4.1.9.5.1.10.2.1

Entry containing security information for a
particular port and a particular MAC address. The
entry can be configured by the user and can be
added by the agent when the device learns a new
secured MAC address.

Indexes

portSecurityExtModuleIndex portSecurityExtPortIndex portSecurityExtSecureSrcAddr

Column Syntax OID

portSecurityExtModuleIndex

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.10.2.1.1

portSecurityExtPortIndex

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.10.2.1.2

portSecurityExtSecureSrcAddr

An index value that uniquely identifies the MAC
address, which is to be secured.

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.9.5.1.10.2.1.3

portSecurityExtControlStatus

This object used to add or remove a secured
MAC address of the corresponding port in
the row. If setting this object to valid(1), the
portSecurityExtSecureSrcAddr is made to be secured
for the port. If setting this obje…

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.9.5.1.10.2.1.4

tokenRingPortTable

table

.1.3.6.1.4.1.9.5.1.11.1 · 1 row entry · 9 columns

Open in standard view

Table containing token ring configuration
information.

tokenRingPortEntry entry .1.3.6.1.4.1.9.5.1.11.1.1

Entry containing token ring configuration
information for a particular port.

Indexes

tokenRingModuleIndex tokenRingPortIndex

Column Syntax OID

tokenRingModuleIndex

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.11.1.1.1

tokenRingPortIndex

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.11.1.1.2

tokenRingPortSetACbits

Specifies if the AC bits shall be set
unconditionally when a port forwards certain LLC
frames.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.5.1.11.1.1.3

tokenRingPortMode

Specifies the port's mode of operation.

auto: Automatically detect the port mode
upon insertion.

fdxCport: Transmit Immediate (full-duplex)
Concentrator Port…

Enumerationr/w

Enumerated Values:

1	auto
2	fdxCport
3	fdxStation
4	hdxCport
5	hdxStation
7	riro

.1.3.6.1.4.1.9.5.1.11.1.1.4

tokenRingPortEarlyTokenRel

This object provides the ability to enable or
disable early token release for a particular port.

Early token release only applies to ports
operating at 16 Mbps. If ifSpeed reflects 4 Mbps
for a particular…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.5.1.11.1.1.9

tokenRingPortPriorityThresh

The highest token ring frame priority that shall
go to the low-priority transmit queue.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.9.5.1.11.1.1.10

tokenRingPortPriorityMinXmit

The minimum token priority that will be used for
transmit.

Integer32r/w

Constraints:
range: 0-6

.1.3.6.1.4.1.9.5.1.11.1.1.11

tokenRingPortCfgLossThresh

Number of configuration loss events during the
sample interval which, if exceeded, should cause
the port to be disabled. If the port is disabled
by this function the port must be administratively
re-enabled.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.9.5.1.11.1.1.12

tokenRingPortCfgLossInterval

The sampling interval, in minutes, for which the
port monitors to see if the configuration loss
threshold has been exceeded.

Integer32r/w

Constraints:
range: 1-9999

.1.3.6.1.4.1.9.5.1.11.1.1.13

tokenRingDripLocalVlanStatusTable

table

.1.3.6.1.4.1.9.5.1.11.12 · 1 row entry · 7 columns

Open in standard view

A table containing DRiP VLAN status information
local to this system. The existence of an
entry indicates that at least one local port
is assigned to the associated TR-CRF VLAN.

tokenRingDripLocalVlanStatusEntry entry .1.3.6.1.4.1.9.5.1.11.12.1

Entry containing DRiP related information for
a particular TR-CRF VLAN.

Indexes

tokenRingDripVlan

Column Syntax OID

tokenRingDripVlan

A TR-CRF VLAN ID.

CISCO-VTP-MIBVlanIndex

Textual Convention: CISCO-VTP-MIBVlanIndex Integer32

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.9.5.1.11.12.1.1

tokenRingDripLocalPortStatus

This object reflects DRiP's status regarding
the overall set of local ports assigned to
the TR-CRF VLAN associated with this entry.
A value of active(1) indicates that at least
one local port is inserted/connected (i.e.…

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.9.5.1.11.12.1.2

tokenRingDripRemotePortStatus

This object reflects DRiP's status regarding
any ports on remote systems. A value of
active(1) indicates that at least one remote
port is inserted/connected (i.e., active on
the Token Ring). A value of inactive(2) indic…

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.9.5.1.11.12.1.3

tokenRingDripRemotePortConfigured

This object reflects whether or not DRiP has
detected remote ports assigned to the TR-CRF
VLAN associated with this entry. A value of
true(1) indicates there is at least one port
on a remote system assigned to this TR-C…

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.9.5.1.11.12.1.4

tokenRingDripDistributedCrf

This object reflects whether DRiP considers the
TR-CRF VLAN associated with this entry to be
distributed across systems. A value of true(1)
indicates the TR-CRF is distributed. A value
of false(2) indicates the TR-CRF i…

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.9.5.1.11.12.1.5

tokenRingDripBackupCrf

This object reflects whether or not the TR-CRF
VLAN associated with this entry is configured
as a backup TR-CRF. A value of true(1) indicates
the TR-CRF is a configured as a backup. A value
of false(2) indicates the TR-…

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.9.5.1.11.12.1.6

tokenRingDripOwnerNodeID

The unique identifier of the system that has
advertised that it has local ports assigned to the
TR-CRF VLAN associated with this entry.

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.9.5.1.11.12.1.7

tokenRingPortSoftErrTable

table

.1.3.6.1.4.1.9.5.1.11.14 · 1 row entry · 5 columns

Open in standard view

Table containing token ring soft error monitoring
configuration information.

tokenRingPortSoftErrEntry entry .1.3.6.1.4.1.9.5.1.11.14.1

Entry containing token ring soft error monitoring
configuration information for a particular port.

Indexes

No indexes recorded

Column Syntax OID

tokenRingPortSoftErrThresh

The number of soft errors reported from a station
connected to this port which, if exceeded, should
cause a soft error exceeded trap to be issued.
The error counters being monitored and compared to
this threshold value …

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.11.14.1.1

tokenRingPortSoftErrReportInterval

The sampling period, in seconds, in which each
station connected to this port will be monitored
for excessive soft error reports. If a station
reports more than tokenRingPortSoftErrThreshold
errors within the sampling p…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.11.14.1.2

tokenRingPortSoftErrResetCounters

When this object is set to reset(2), all Soft
Error Monitoring related counters on this port
will be set to 0.

Enumerationr/w

Enumerated Values:

1	noop
2	reset

.1.3.6.1.4.1.9.5.1.11.14.1.3

tokenRingPortSoftErrLastCounterReset

The time (in hundredths of a second) since Soft
Error Monitoring counters for this port were last
cleared.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.11.14.1.4

tokenRingPortSoftErrEnable

Indicates whether the Token Ring Soft Error
Monitoring feature is enabled on this port or not.
The detailed soft error statistics are provided
by Token Ring RMON SNMP objects. Thus, if RMON
(sysEnableRmon) is disabled(2…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.5.1.11.14.1.5

mcastRouterTable

table

.1.3.6.1.4.1.9.5.1.12.1 · 1 row entry · 4 columns

Open in standard view

A list of multicast router port entries. The
number of entries is determined by the number of
ports in the system.

mcastRouterEntry entry .1.3.6.1.4.1.9.5.1.12.1.1

Entry containing multicast router information for
a particular port.

Indexes

mcastRouterModuleIndex mcastRouterPortIndex

Column Syntax OID

mcastRouterModuleIndex

An index value that uniquely identifies the
module where this port is located
(see portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.12.1.1.1

mcastRouterPortIndex

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.12.1.1.2

mcastRouterAdminStatus

And indication of whether the presence of an IP
multicast router on this port is to be determined
statically or dynamically. The value
routerPresent(1) indicates that the presence of a
router is statically configured to…

Enumerationr/w

Enumerated Values:

1	routerPresent
3	dynamic

.1.3.6.1.4.1.9.5.1.12.1.1.3

mcastRouterOperStatus

An indication of whether an IP multicast router
is present on this port.

Enumeration

Enumerated Values:

1	routerPresent
2	noRouter

.1.3.6.1.4.1.9.5.1.12.1.1.4

dnsServerTable

table

.1.3.6.1.4.1.9.5.1.13.2 · 1 row entry · 2 columns

Open in standard view

This table lists a maximum of 3 DNS servers.

dnsServerEntry entry .1.3.6.1.4.1.9.5.1.13.2.1

A DNS server table entry.

Indexes

dnsServerAddr

Column Syntax OID

dnsServerAddr

The IP address of a DNS server.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.13.2.1.1

dnsServerType

To add a new entry to the dnsServerTable, set
this object to primary(2) or other(3) for an IP
address which is not already in the table. The
primary entry will be used first, if it is
reachable. Otherwise, one of the ot…

Enumerationr/w

Enumerated Values:

1	invalid
2	primary
3	other

.1.3.6.1.4.1.9.5.1.13.2.1.2

syslogServerTable

table

.1.3.6.1.4.1.9.5.1.14.1 · 1 row entry · 2 columns

Open in standard view

This table lists a maximum of 3 system log
servers.

syslogServerEntry entry .1.3.6.1.4.1.9.5.1.14.1.1

A system log server table entry.

Indexes

syslogServerAddr

Column Syntax OID

syslogServerAddr

The IP address of a system log Server.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.14.1.1.1

syslogServerType

To add/remove a new entry to the
syslogServerTable, setting to invalid(2) removes
the corresponding entry from the
syslogServerTable. To add a new entry into
syslogServerTable, set this object to valid(1)
for an IP addr…

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.9.5.1.14.1.1.2

syslogMessageControlTable

table

.1.3.6.1.4.1.9.5.1.14.4 · 1 row entry · 2 columns

Open in standard view

This table contains the information about what
system log messages should be sent to syslog host,
console, login session, and/or logged into the
internal buffer.

syslogMessageControlEntry entry .1.3.6.1.4.1.9.5.1.14.4.1

A system log message control table entry.

Indexes

syslogMessageFacility

Column Syntax OID

syslogMessageFacility

System log message facility.

Enumeration

Enumerated Values:

1	cdp
2	mcast
3	dtp
4	dvlan
5	earl
6	fddi
7	ip
8	pruning
9	snmp
10	spantree
11	system
12	tac
13	tcp
14	telnet
15	tftp
16	vtp
17	vmps
18	kernel
19	filesys
20	drip
21	pagp
22	mgmt
23	mls
24	protfilt
25	security
26	radius
27	udld
28	gvrp
29	cops
30	qos
31	acl
32	rsvp
33	ld
34	privatevlan
35	ethc
36	gl2pt
37	callhome
38	dhcpsnooping
40	diags
42	eou
43	backup
44	eoam
45	webauth
46	dom
47	mvrp

.1.3.6.1.4.1.9.5.1.14.4.1.1

syslogMessageSeverity

System log message severity.

Enumerationr/w

Enumerated Values:

1	emergencies
2	alerts
3	critical
4	errors
5	warnings
6	notification
7	informational
8	debugging

.1.3.6.1.4.1.9.5.1.14.4.1.2

ntpServerTable

table

.1.3.6.1.4.1.9.5.1.15.4 · 1 row entry · 3 columns

Open in standard view

A list of NTP Server entries. This table lists a
maximum of 10 Entries.

ntpServerEntry entry .1.3.6.1.4.1.9.5.1.15.4.1

Entry containing NTP information for a particular
entry.

Indexes

ntpServerAddress

Column Syntax OID

ntpServerAddress

Entry containing NTP Server's IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.15.4.1.1

ntpServerType

To add or remove an entry to ntpServerTable.
Setting to 1 adds the entry and setting to 2
clears the entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.9.5.1.15.4.1.2

ntpServerPublicKey

The key to be used when communicating with this
server.
A key with a value of zero indicates an invalid
ntpServerPublicKey. When the authentication
feature is enabled the system will not sync with
this server when ntpAu…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.15.4.1.3

ntpAuthenticationTable

table

.1.3.6.1.4.1.9.5.1.15.11 · 1 row entry · 4 columns

Open in standard view

A list of NTP Authentication Key entries.
This table lists a maximum of 10 Entries

ntpAuthenticationEntry entry .1.3.6.1.4.1.9.5.1.15.11.1

An entry in the ntpAuthenticationTable,
containing values of an NTP authentication key
pair.

Indexes

ntpAuthenticationPublicKey

Column Syntax OID

ntpAuthenticationPublicKey

A unique value to identify the authentication
key. When the authentication feature is enabled
and the ntpAuthenticationPublicKey matches with
the NTP packet's public key then this entry is
used.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.15.11.1.1

ntpAuthenticationSecretKey

An arbitrary string known as the secret key used
for encrypting of the NTP packet. This key is
useful when the ntpAuthenticationTrustedMode is
set to trusted(1).
This key has to be specified when this
ntpAuthenticationE…

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.9.5.1.15.11.1.2

ntpAuthenticationTrustedMode

A flag indicates whether the
ntpAuthenticationSecretKey is trusted or
untrusted. Setting a ntpAuthenticationSecretKey
to trusted(1) allows authentication on NTP
packets containing this key, and setting a
ntpAuthenticati…

Enumerationr/w

Enumerated Values:

1	trusted
2	untrusted

.1.3.6.1.4.1.9.5.1.15.11.1.3

ntpAuthenticationType

To add or remove an entry to
ntpAuthenticationTable. Setting to 1 adds the
entry and setting to 2 clears the entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.9.5.1.15.11.1.4

tacacsServerTable

table

.1.3.6.1.4.1.9.5.1.16.9 · 1 row entry · 2 columns

Open in standard view

This table lists a maximum of 3 TACACS+ servers.

tacacsServerEntry entry .1.3.6.1.4.1.9.5.1.16.9.1

A TACACS+ server table entry.

Indexes

tacacsServerAddr

Column Syntax OID

tacacsServerAddr

The IP address of a TACACS+ Server.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.16.9.1.1

tacacsServerType

To add a new entry to the tacacsServerTable, set
this object to primary(2) or other(3) for an IP
address which is not already in the table. The
primary entry will be used first, if it is
reachable. Otherwise, one of the…

Enumerationr/w

Enumerated Values:

1	invalid
2	primary
3	other

.1.3.6.1.4.1.9.5.1.16.9.1.2

ipPermitListTable

table

.1.3.6.1.4.1.9.5.1.17.2 · 1 row entry · 6 columns

Open in standard view

This table lists a maximum of 100 IP Addresses
with net masks of IP permit hosts. If
ipPermitEnable is set to enabled(1), the system
will only accept inbound accesses which come from
the configured hosts with their permit access
types in this table.

ipPermitListEntry entry .1.3.6.1.4.1.9.5.1.17.2.1

A IP permit list table entry.

Indexes

ipPermitAddress ipPermitMask

Column Syntax OID

ipPermitAddress

The IP address of a IP permit host.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.17.2.1.1

ipPermitMask

The IP net mask of a IP permit host.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.17.2.1.2

ipPermitType

Setting this object to invalid(2), removes the
corresponding entry from the ipPermitListTable. To
add a new entry into ipPermitListTable, set this
object to valid(1), for an IP address and IP net
mask which are not alre…

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.9.5.1.17.2.1.3

ipPermitAccessType

The IP access type of a IP permit host.
At least one access type has to be set.

Bitsr/w

Enumerated Values:

0	telnet
1	snmp
2	ssh
3	http

.1.3.6.1.4.1.9.5.1.17.2.1.4

ipPermitTelnetConnectLimit

Indicates the telnet connection limit that
will be applied when accepting new telnet
connections for a specific host. A value of
zero means no limit will be applied for telnet
connections.

Setting thi…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.17.2.1.5

ipPermitSshConnectLimit

Indicates the ssh connection limit that will
be applied when accepting new ssh connections
for a specific host. A value of zero means no
limit will be applied for ssh connections.

Setting this object t…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.17.2.1.6

ipPermitDeniedListTable

table

.1.3.6.1.4.1.9.5.1.17.3 · 1 row entry · 3 columns

Open in standard view

This table lists up to 10 the most recently
denied IP addresses with the access type.

ipPermitDeniedListEntry entry .1.3.6.1.4.1.9.5.1.17.3.1

A IP permit denied list table entry.

Indexes

ipPermitDeniedAddress

Column Syntax OID

ipPermitDeniedAddress

The IP address of a IP permit denied access.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.17.3.1.1

ipPermitDeniedAccess

The denied access type.

Enumeration

Enumerated Values:

1	telnet
2	snmp
3	ssh
4	http

.1.3.6.1.4.1.9.5.1.17.3.1.2

ipPermitDeniedTime

The time (in hundredths of a second) since the IP
permit denied access happens.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.17.3.1.3

portChannelTable

table deprecated

.1.3.6.1.4.1.9.5.1.18.1 · 1 row entry · 10 columns

Open in standard view

A list of port channel entries. The number of
entries is determined by the number of ports in
the system which support the Ethernet Channelling
feature.
          
This table is deprecated and replaced by
pagpEtherChannelTable in CISCO-PAGP-MIB and
dot3adAggTable in IEEE8023-LAG-MIB.

portChannelEntry entry .1.3.6.1.4.1.9.5.1.18.1.1

Entry containing information for a particular
port on a module.

Indexes

portChannelModuleIndex portChannelPortIndex

Column Syntax OID

portChannelModuleIndex deprecated

An index value that uniquely identifies the
module where this port is located.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.18.1.1.1

portChannelPortIndex deprecated

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.18.1.1.2

portChannelPorts deprecated

The set of ports on a module channelling
together. Each Octet within the value of this
object specifies a set of eight ports, with the
first octet specifying ports 1 through 8, the
second octet specifying ports 9 throug…

OctetStringr/w

Constraints:
range: 0-8

.1.3.6.1.4.1.9.5.1.18.1.1.3

portChannelAdminStatus deprecated

Indicates the administrative status set on the
channel ports. If the status is set to on(1), the
channelling is enabled. If the status is set to
off(2), the channelling is disabled. If the status
is set to desirable(3),…

Enumerationr/w

Enumerated Values:

1	on
2	off
3	desirable
4	auto
5	desirableSilent
6	autoSilent

.1.3.6.1.4.1.9.5.1.18.1.1.4

portChannelOperStatus deprecated

Indicates whether the ports current channelling
operational status is channel or not.

Enumeration

Enumerated Values:

1	channelling
2	notChannelling

.1.3.6.1.4.1.9.5.1.18.1.1.5

portChannelNeighbourDeviceId deprecated

Indicates the neighbors device id.

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.9.5.1.18.1.1.6

portChannelNeighbourPortId deprecated

Indicates the neighbor ports' Id.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.9.5.1.18.1.1.7

portChannelProtInPackets deprecated

Indicates the number of protocol packets received
on the ports.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.18.1.1.8

portChannelProtOutPackets deprecated

Indicates the number of protocol packets
transmitted on the ports.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.18.1.1.9

portChannelIfIndex deprecated

The value of the instance of the ifIndex object
defined in MIB-II, for the interface corresponding
to the channel which the port belongs to. This
object will have a non zero value if its
portChannelOperStatus is channel…

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.9.5.1.18.1.1.10

portCpbTable

table

.1.3.6.1.4.1.9.5.1.19.1 · 1 row entry · 21 columns

Open in standard view

A list of port capability entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each
module.

portCpbEntry entry .1.3.6.1.4.1.9.5.1.19.1.1

Entry containing port capability information for
a particular port on a module.

Indexes

portCpbModuleIndex portCpbPortIndex

Column Syntax OID

portCpbModuleIndex

An index value that uniquely identifies the
module where this port is located (see
portModuleIndex).

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.19.1.1.1

portCpbPortIndex

An index value that uniquely identifies this port
within a module (see portIndex).

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.19.1.1.2

portCpbSpeed

Indicates the port speed capability of a port.

Bits

Enumerated Values:

0	auto
1	mbps4
2	mbps10
3	mbps16
4	mbps45
5	mbps100
6	mbps155
7	mbps400
8	mbps622
9	mbps1000
10	mbps1dot544
11	mbps2
12	mbps2dot048
13	kps64
14	mbps10000

.1.3.6.1.4.1.9.5.1.19.1.1.3

portCpbDuplex

Indicates the duplex capability of a port.
The fdx(4) is specially for tokenring full-duplex
and hdx(3) is specially for tokenring
half-duplex.

Bits

Enumerated Values:

0	half
1	full
2	auto
3	hdx
4	fdx

.1.3.6.1.4.1.9.5.1.19.1.1.4

portCpbTrunkEncapsulationType

Indicates the VLAN encapsulation capability of a
port, The dot10(1) is for 801.10 and dot1q(2) is
for 801.1Q.

Bits

Enumerated Values:

0	lane
1	dot10
2	dot1Q
3	isl
4	negotiate

.1.3.6.1.4.1.9.5.1.19.1.1.5

portCpbTrunkMode

Indicates the trunk capability of a port.

Bits

Enumerated Values:

0	on
1	off
2	desirable
3	auto
4	onNoNegotiate

.1.3.6.1.4.1.9.5.1.19.1.1.6

portCpbChannel

Indicates the channelling capability of a port.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.9.5.1.19.1.1.7

portCpbBroadcastSuppression

Indicates the broadcast suppression capability of
a port. The pps(0) is for ports capable of
specifying suppression in packets per second and
percentage(1) is for ports capable of specifying
suppression in terms of perc…

Bits

Enumerated Values:

0	pps
1	percentage

.1.3.6.1.4.1.9.5.1.19.1.1.8

portCpbFlowControl

Indicates the flow control capability of a port.

Bits

Enumerated Values:

0	receiveOff
1	receiveOn
2	receiveDesired
3	sendOff
4	sendOn
5	sendDesired

.1.3.6.1.4.1.9.5.1.19.1.1.9

portCpbSecurity

Indicates whether a port supports security.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.9.5.1.19.1.1.10

portCpbVlanMembership

Indicates the vlan membership capability of a
port.

Bits

Enumerated Values:

0	static
1	dynamic

.1.3.6.1.4.1.9.5.1.19.1.1.11

portCpbPortfast

Indicates whether a port supports portfast.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.9.5.1.19.1.1.12

portCpbUdld

Indicates whether the port is capable of UDLD
(UniDirectional Link Detection) or not.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.9.5.1.19.1.1.13

portCpbInlinePower

Indicate the inline power capability of a port.
'auto' denotes the ability that the switch
automatically determines whether or not power
should be provided. 'on' denotes the ability to
manually turn on inline power.
'of…

Bits

Enumerated Values:

0	auto
1	on
2	off
3	static

.1.3.6.1.4.1.9.5.1.19.1.1.14

portCpbAuxiliaryVlan

Indicate the voice vlan capability of a port.

Bits

Enumerated Values:

0	vlanNo
1	untagged
2	dot1p
3	none

.1.3.6.1.4.1.9.5.1.19.1.1.15

portCpbSpan

Indicates port span capabilities.
source(0) denotes the capability of being SPAN
source destination(1) denotes the capability of
being SPAN destination, reflector(2) denotes the
capability of being SPAN reflector.

Bits

Enumerated Values:

0	source
1	destination
2	reflector

.1.3.6.1.4.1.9.5.1.19.1.1.16

portCpbCosRewrite

Indicates whether a port supports CoS rewrite.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.9.5.1.19.1.1.17

portCpbTosRewrite

Indicates the ToS rewrite capability of a port.
dscp(0) denotes the port capability to classify
packets according to the DSCP.
ipPrecedence(1) denotes the port capability to
classify packets according to the IP Preceden…

Bits

Enumerated Values:

0	dscp
1	ipPrecedence

.1.3.6.1.4.1.9.5.1.19.1.1.18

portCpbCopsGrouping

The set of ports on a module that are configured
together as far as the Differentiated Services
Cops feature is concerned. Each Octet within the
value of this object specifies a set of eight
ports, with the first octet …

OctetString

Constraints:
range: 0-8

.1.3.6.1.4.1.9.5.1.19.1.1.19

portCpbDot1x

Indicates whether a port supports 802.1x.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.9.5.1.19.1.1.20

portCpbIgmpFilter

Indicates whether a port supports IGMP filter.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.9.5.1.19.1.1.21

portTopNControlTable

table

.1.3.6.1.4.1.9.5.1.20.1 · 1 row entry · 12 columns

Open in standard view

A list of top N port control entries.

portTopNControlEntry entry .1.3.6.1.4.1.9.5.1.20.1.1

A set of parameters that control the creation of
a report of the top N ports according to several
metrics.
For example, an instance of the portTopNDuration
object might be named portTopNDuration.3

Indexes

portTopNControlIndex

Column Syntax OID

portTopNControlIndex

An index that uniquely identifies an entry
in the portTopNControl table. Each such
entry defines one top N report.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.9.5.1.20.1.1.1

portTopNRateBase

The variable for all ports in this system
based on which portTopNTable/report is ordered.

This object may not be modified if the associated
portTopNStatus object is equal to active(1).

Enumerationr/w

Enumerated Values:

1	portTopNUtilization
2	portTopNIOOctets
3	portTopNIOPkts
4	portTopNIOBroadcastPkts
5	portTopNIOMulticastPkts
6	portTopNInErrors
7	portTopNBufferOverflow

.1.3.6.1.4.1.9.5.1.20.1.1.2

portTopNType

The sampling port type.

This object may not be modified if the associated
portTopNStatus object is equal to active(1).

Enumerationr/w

Enumerated Values:

1	portTopNAllPorts
2	portTopNEthernet
3	portTopNFastEthernet
4	portTopNGigaEthernet
5	portTopNTokenRing
6	portTopNFDDI
7	portTopNAllEthernetPorts
8	portTopN10GigaEthernet

.1.3.6.1.4.1.9.5.1.20.1.1.3

portTopNMode

The running mode of this portTopN control entry.
portTopNForeground (1) means when
portTopNTimeRemaining reaches to 0, the report
will show on the CLI at once and it won't be kept
in the portTopNTable. portTopNBackgroun…

Enumerationr/w

Enumerated Values:

1	portTopNForeground
2	portTopNBackground

.1.3.6.1.4.1.9.5.1.20.1.1.4

portTopNReportStatus

The report status of this portTopN control entry.
Progressing (1) means that the report of this
portTopN control entry is still in progress. The
management station can poll this mib object to
check the report data is av…

Enumeration

Enumerated Values:

1	progressing
2	ready

.1.3.6.1.4.1.9.5.1.20.1.1.5

portTopNDuration

The sampling interval in seconds during which
statistics are collected for this report.

When this is set a value and the corresponding
portTopNControlEntry is valid, the
portTopNTimeRemaining object shall…

Integer32r/w

Constraints:
range: 0-0
range: 10-999

.1.3.6.1.4.1.9.5.1.20.1.1.6

portTopNTimeRemaining

The number of seconds left in the report
currently being collected. When portTopNDuration
object is modified by the management station, a
new collection is started, possibly aborting a
currently running report. The new …

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.5.1.20.1.1.7

portTopNStartTime

The value of sysUpTime when this top N report was
last started. In other words, this is the time
that the associated portTopNTimeRemaining object
was modified to start the requested report.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.20.1.1.8

portTopNRequestedSize

The maximum number of ports requested for the top
N entry.

When this object is created or modified, the value
of portTopNGrantedSize is set as closely to this
object as is possible for the particular
impl…

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.5.1.20.1.1.9

portTopNGrantedSize

The maximum number of ports in the top N table.
When the associated portTopNRequestedSize object
is created or modified, the value of this object
should be set as closely to the requested value as
is possible for the pa…

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.5.1.20.1.1.10

portTopNOwner

The entity that configured this entry and is
therefore using the resources assigned to it.

IF-MIBOwnerStringr/w

Textual Convention: IF-MIBOwnerString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.5.1.20.1.1.11

portTopNStatus

The status of this portTopNControl entry.
The Management station sends the user set values
with a portTopNStatus value of createAndGo(4).
When the agent receives it the collection of the
report starts.
When the portTopN…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.5.1.20.1.1.12

portTopNTable

table

.1.3.6.1.4.1.9.5.1.20.2 · 1 row entry · 10 columns

Open in standard view

A list of top N port entries.

portTopNEntry entry .1.3.6.1.4.1.9.5.1.20.2.1

A set of statistics for a port that is part of a
top N report. For example, an instance of the
portTopNRateBase object might be named
portTopNUtilization.3.10

Indexes

portTopNControlIndex portTopNIndex

Column	Syntax	OID
portTopNIndex An index that uniquely identifies an entry in the portTopN table among those in the same report. This index is between 1 and N, where N is the portTopNGrantedSize of ports with the highest portTopNRateBase. Increasing v…	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.9.5.1.20.2.1.1`
portTopNModuleNumber The module number of the port counter data entry.	Integer32 Constraints: `range: 1-20`	`.1.3.6.1.4.1.9.5.1.20.2.1.2`
portTopNPortNumber The port number of the port counter data entry.	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.9.5.1.20.2.1.3`
portTopNUtilization The utilization of the port in the system. The utilization is computed in the following methods: Ethernet Utilization: (If Full Duplex, multiply by 2) 10 Mbps I/O-pkts * (9.6 + 6.4)…	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.9.5.1.20.2.1.4`
portTopNIOOctets The Input and Output octets of the port in the system.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.9.5.1.20.2.1.5`
portTopNIOPkts The Input and Output packets of the port in the system.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.9.5.1.20.2.1.6`
portTopNIOBroadcast The Input and Output broadcast packets of the port in the system.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.9.5.1.20.2.1.7`
portTopNIOMulticast The Input and Output multicast packets of the port in the system.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.9.5.1.20.2.1.8`
portTopNInErrors The Input error packets of the port in the system.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.5.1.20.2.1.9`
portTopNBufferOverFlow The number of buffer overflow of the port in the system.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.5.1.20.2.1.10`

mdgGatewayTable

table

.1.3.6.1.4.1.9.5.1.21.1 · 1 row entry · 2 columns

Open in standard view

This table lists a maximum of 3 MDG gateways.

mdgGatewayEntry entry .1.3.6.1.4.1.9.5.1.21.1.1

A MDG gateway table entry.

Indexes

mdgGatewayAddr

Column Syntax OID

mdgGatewayAddr

The IP address of a default gateway.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.21.1.1.1

mdgGatewayType

To add a new entry to the mdgGatewayTable, set
this object to primary(2) or other(3) for an IP
address which is not already in the table. The
primary entry will be used first, if it is
reachable. Otherwise, one of the o…

Enumerationr/w

Enumerated Values:

1	invalid
2	primary
3	other

.1.3.6.1.4.1.9.5.1.21.1.1.2

radiusServerTable

table deprecated

.1.3.6.1.4.1.9.5.1.22.7 · 1 row entry · 3 columns

Open in standard view

This table lists a maximum of 3 RADIUS servers.
          
This object is deprecated and replaced by
crRadiusServerTable in CISCO-RADIUS-MIB.

radiusServerEntry entry .1.3.6.1.4.1.9.5.1.22.7.1

A RADIUS server table entry.

Indexes

radiusServerAddr

Column Syntax OID

radiusServerAddr deprecated

The IP address of a RADIUS Server.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.22.7.1.1

radiusServerAuthPort deprecated

This is the destination UDP port number to which
RADIUS messages should be sent. The RADIUS server
will not be used for authentication if this port
number is 0.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.5.1.22.7.1.2

radiusServerType deprecated

To add a new entry to the radiusServerTable, set
this object to primary(2) or other(3) for an IP
address which is not already in the table. The
primary entry will be used first, if it is
reachable. Otherwise, one of the…

Enumerationr/w

Enumerated Values:

1	invalid
2	primary
3	other

.1.3.6.1.4.1.9.5.1.22.7.1.3

traceRouteQueryTable

table

.1.3.6.1.4.1.9.5.1.24.2 · 1 row entry · 14 columns

Open in standard view

A control table used to query the information
about each gateway along the path to a host by
specifying retrieval criteria for the host. The
resulting data for each instance of a query in
this table is returned in the traceRouteDataTable.
The maximum number of entries (rows) in this table
cannot exceed the value returned by
traceRouteMaxQueries.

traceRouteQueryEntry entry .1.3.6.1.4.1.9.5.1.24.2.1

A conceptual row of the traceRouteQueryTable used
to setup retrieval criteria to search for gateways
belongs to the path to a particular host
identified by its IP address. The actual search
is started by setting the val…

Indexes

traceRouteQueryIndex

Column Syntax OID

traceRouteQueryIndex

Object which specifies an unique entry in the
traceRouteQueryTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.5.1.24.2.1.1

traceRouteHost

Network(IP) address in dotted decimal format or
the DNS hostname of the host which is tracerouted.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.9.5.1.24.2.1.2

traceRouteQueryDNSEnable

If this value of this object is true, the
traceroute operation will do a DNS lookup for each
hop on the path, so the corresponding instance of
the traceRouteDataTable will contain the host name
and the ip address; other…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.5.1.24.2.1.3

traceRouteQueryWaitingTime

The trace route waiting time in seconds for an
ICMP response message.

secondsInteger32r/w

Constraints:
range: 1-300

.1.3.6.1.4.1.9.5.1.24.2.1.4

traceRouteQueryInitTTL

If this value of this object is set, it allows
users skip processing for gateways that are less
than traceRouteQueryInitTTL away by sending
datagram with the value of this object instead of
the default value of one.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.24.2.1.5

traceRouteQueryMaxTTL

The maximum TTL value used in outgoing packets.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.24.2.1.6

traceRouteQueryUDPPort

The base UDP destination port is used in the
traceroute datagrams. This value of this object is
often larger than 30,000 to make it improbable
that this port is used (this causes the
destination host's UDP module to gen…

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.5.1.24.2.1.7

traceRouteQueryPacketCount

Specifies the number of traceroute packets to
send to the target host in this sequence.

Integer32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.9.5.1.24.2.1.8

traceRouteQueryPacketSize

Specifies the size of traceroute packets to send
to the target host in this sequence.

Integer32r/w

Constraints:
range: 0-1420

.1.3.6.1.4.1.9.5.1.24.2.1.9

traceRouteQueryTOS

The type of service to be set in the IP header of
the outgoing packets.This value can set to see if
different types-of-service result in different
paths. Not all values of TOS are legal or
meaningful (see the IP spec fo…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.9.5.1.24.2.1.10

traceRouteQueryResult

The result status of the query. Possible values
are:

-1 -Either the query has not been initiated or the
agent is busy processing this query instance. Time
to completion of the query processing depends on
…

Integer32

Constraints:
range: -1-2147483647

.1.3.6.1.4.1.9.5.1.24.2.1.21

traceRouteQueryTime

The value of sysUpTime at the time when the query
is configured.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.24.2.1.22

traceRouteQueryOwner

The manager entity that configured this entry and
is therefore using the resources assigned to it.

OctetStringr/w

Constraints:
range: 0-50

.1.3.6.1.4.1.9.5.1.24.2.1.23

traceRouteQueryStatus

The status object used to manage rows in this
table.
When set this object to valid(1), the query is
initiated. Once initiated, all the read-write
objects of this table can't be modified. To remove
an entry from the tab…

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.9.5.1.24.2.1.24

traceRouteDataTable

table

.1.3.6.1.4.1.9.5.1.24.3 · 1 row entry · 6 columns

Open in standard view

A table containing information about the gateway
belongs to the path to the host corresponding to
all the completed queries setup in the
traceRouteQueryTable.

traceRouteDataEntry entry .1.3.6.1.4.1.9.5.1.24.3.1

A conceptual row of the traceRouteDataTable used
to return information about all the gateway
belongs to the host of which search criteria is
corresponding instance of the
traceRouteQueryTable.

Indexes

traceRouteQueryIndex traceRouteDataIndex

Column Syntax OID

traceRouteDataIndex

Object which specifies an unique entry in the
traceRouteDataTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.5.1.24.3.1.1

traceRouteDataGatewayName

The DNS name of the gateway if available.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.9.5.1.24.3.1.2

traceRouteDataGatewayIp

The ip address of the gateway. If the traceroute
packet was sent and timed-out, the ip address is
set to 0.0.0.0.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.24.3.1.3

traceRouteDataRtt

The round trip time of the current packet that
have been sent in this sequence.

millisecondsInteger32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.5.1.24.3.1.4

traceRouteDataHopCount

The number of hop starting from the place where
the traceroute operation is initialized to the
gateway which has the traceRouteDataGatewayIp.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.5.1.24.3.1.5

traceRouteDataErrors

The error of the traceroute operation.

Enumeration

Enumerated Values:

1	icmpUnreachNet
2	icmpUnreachHost
3	icmpUnreachProtocol
4	icmpUnreachPort
5	icmpUnreachNeedFrag
6	icmpUnreachSrcFail
7	icmpUnreachNoNet
8	icmpUnreachNoHost
9	icmpUnreachHostIsolated
10	icmpUnreachNetProhib
11	icmpUnreachProhib
12	icmpUnreachNetTos
13	icmpUnreachHostTos
14	icmpUnreachAdmin
15	icmpUnreachHostPrec
16	icmpUnreachPrecedence
17	icmpUnknown
18	icmpTimeOut
19	icmpTTLExpired

.1.3.6.1.4.1.9.5.1.24.3.1.6

voicePortIfConfigTable

table

.1.3.6.1.4.1.9.5.1.26.1 · 1 row entry · 10 columns

Open in standard view

A list of port entries. The number of entries is
determined by the number of modules in the chassis
and the number of ports with the voice port
interface configuration capability in the system.

voicePortIfConfigEntry entry .1.3.6.1.4.1.9.5.1.26.1.1

Entry containing voice interface configuration
for a particular port.

Indexes

voicePortIfConfigModuleIndex voicePortIfConfigPortIndex

Column Syntax OID

voicePortIfConfigModuleIndex

An index value that uniquely identifies the
module where this port is located.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.26.1.1.1

voicePortIfConfigPortIndex

An index value that uniquely identifies this port
within a module. The value is determined by the
location of the port on the module.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.26.1.1.2

voicePortIfDHCPEnabled

Indicate whether DHCP service is enabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.5.1.26.1.1.3

voicePortIfIpAddress

This port's IP address. This object
is configurable only if voicePortIfDHCPEnabled
is false. When the value of voicePortIfDHCPEnabled
is false, this object should be configured.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.26.1.1.4

voicePortIfIpNetMask

This port's subnet mask. This object
is configurable only if voicePortIfDHCPEnabled
is false. When the value of voicePortIfDHCPEnabled
is false, this object should be configured.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.26.1.1.5

voicePortIfTftpServerAddress

This port's TFTP Server address. This object
is configurable only if voicePortIfDHCPEnabled
is false. When the value of voicePortIfDHCPEnabled
is false, this object should be configured.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.26.1.1.6

voicePortIfGatewayAddress

This port's router address. This object
is configurable only if voicePortIfDHCPEnabled
is false.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.26.1.1.7

voicePortIfDnsServerAddress

This port's DNS Server address. This object
is configurable only if voicePortIfDHCPEnabled
is false.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.26.1.1.8

voicePortIfDnsDomain

This port's DNS domain name. This object
is configurable only if voicePortIfDHCPEnabled
is false.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.9.5.1.26.1.1.9

voicePortIfOperDnsDomain

This port's operational DNS domain name. If
voicePortIfDHCPEnabled is true, this object
indicates the domain name taken from the
DHCP server. If voicePortIfDHCPEnabled is false,
this object indicates the domain name con…

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.9.5.1.26.1.1.10

voicePortCallManagerTable

table

.1.3.6.1.4.1.9.5.1.26.2 · 1 row entry · 4 columns

Open in standard view

A list of call manager entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports with the
voice port interface configuration capability
in the system.

voicePortCallManagerEntry entry .1.3.6.1.4.1.9.5.1.26.2.1

Entry containing voice interface configuration
for a particular port.

Indexes

voicePortModuleIndex voicePortIndex voicePortCallManagerIndex

Column	Syntax	OID
voicePortModuleIndex An index value that uniquely identifies the module where this port is located.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.9.5.1.26.2.1.1`
voicePortIndex An index value that uniquely identifies this port within a module.	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.9.5.1.26.2.1.2`
voicePortCallManagerIndex An index value that uniquely identifies this CallManager within a module/port. A port can register up to 5 CallManager.	Integer32 Constraints: `range: 1-5`	`.1.3.6.1.4.1.9.5.1.26.2.1.3`
voicePortCallManagerIpAddr The Call Manager IP Address of this port. A port can register up to 5 call managers.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.9.5.1.26.2.1.4`

voicePortOperDnsServerTable

table

.1.3.6.1.4.1.9.5.1.26.3 · 1 row entry · 5 columns

Open in standard view

A list of operational DNS entries used by the
voice ports.

voicePortOperDnsServerEntry entry .1.3.6.1.4.1.9.5.1.26.3.1

Entry containing infomation on DNS servers may be
used for a particular voice port.

If DHCP is enabled on a port, the DNS server IP
address will come from the DHCP server. If DHCP
is disabled, the DNS serve…

Indexes

voicePortDnsModuleIndex voicePortDnsPortIndex voicePortOperDnsServerIndex

Column Syntax OID

voicePortDnsModuleIndex

An index value that uniquely identifies the
module where this port is located.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.26.3.1.1

voicePortDnsPortIndex

An index value that uniquely identifies this port
within a module.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.26.3.1.2

voicePortOperDnsServerIndex

An index value that uniquely identifies this DNS
server within a module/port. This value indicates
the priority order among these DNS servers.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.5.1.26.3.1.3

voicePortOperDnsServerIpAddr

The operational DNS Server IP Address of this
port.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.9.5.1.26.3.1.4

voicePortOperDnsServerSource

The source of the Dns Server IP Address of this
port.

fromDhcp(1) indicates that the DNS server IP
address comes from the DHCP server.

fromPortConfig(2) indicates that the DNS server IP
add…

Enumeration

Enumerated Values:

1	fromDhcp
2	fromPortConfig
3	fromSystemConfig

.1.3.6.1.4.1.9.5.1.26.3.1.5

portJumboFrameTable

table

.1.3.6.1.4.1.9.5.1.27.1 · 1 row entry · 3 columns

Open in standard view

A list of port jumbo frame entries. The number of
entries is determined by the number of ports in
the system which support the Jumbo frame feature.

portJumboFrameEntry entry .1.3.6.1.4.1.9.5.1.27.1.1

Entry containing the jumbo frame configuration
for a particular port.

Indexes

portJumboFrameModuleIndex portJumboFramePortIndex

Column Syntax OID

portJumboFrameModuleIndex

An index value that uniquely identifies the
module where this port is located.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.27.1.1.1

portJumboFramePortIndex

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.9.5.1.27.1.1.2

portJumboFrameEnable

Indicates the jumbo frame status of the port. If
enabled, the port supports frame size greater than
the standard ethernet frame size of 1518 bytes.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.5.1.27.1.1.3

switchAccelerationModuleTable

table

.1.3.6.1.4.1.9.5.1.28.1 · 1 row entry · 2 columns

Open in standard view

This table contains a list of the modules for
which the switch acceleration capability can be
configured.

switchAccelerationModuleEntry entry .1.3.6.1.4.1.9.5.1.28.1.1

A module for which switch acceleration can be
configured.

Indexes

switchAccelerationModuleIndex

Column Syntax OID

switchAccelerationModuleIndex

The value of moduleIndex for the module where
switch acceleration feature can be configured.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.9.5.1.28.1.1.1

switchAccelerationModuleEnable

Indicates whether switch acceleration is enabled
on this module or not.

When this feature is enabled, the system will
increase the switching bandwidth, but the
ifAdminStatus of any port on this module…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.5.1.28.1.1.2