moduleSubType2

CISCO-STACK-MIB · .1.3.6.1.4.1.9.5.1.3.1.1.24
MIB view Table view

Object

column Enumeration 
The type of daughterboard attached to this
module.

Context

MIB
CISCO-STACK-MIB
OID
.1.3.6.1.4.1.9.5.1.3.1.1.24
Type
column
Access
readonly
Status
current
Parent
moduleEntry
Table
moduleTable
Siblings
27

Syntax

Enumeration

Values & Constraints

Enumerated Values
1other
2empty
3wsu5531
5wsu5533
6wsu5534
7wsu5535
8wsu5536
9wsu5537
10wsu5538
11wsu5539
102wsg6488
103wsg6489
104wsg6483
105wsg6485
106wsf6kFe48af
107wsf6kGe48af
108wsf6kVpwrGe
109wsf6kFe48x2af
207wsf6kmsfc
234wsf6kmsfc2
314wsu4504fxmt
315wsu4502gb
402wssvcidsupg
403wssvccmm6e1
404wssvccmm6t1
405wssvccmm24fxs
406wssvccmmact
410aceModExpnDc
411wsSvcAppProc1
597wssvcpisa32
598me6524msfc2a
599wsf6kmsfc2a
618c7600Es4Tg
620c7600Es2Tg
625c7600EsItu4TgLk
626c7600EsItu2TgLk
1001wssup720
1005vsf6kmsfc5
1026vsf6kmsfc3
1701esm2x10ge
1805c7600msfc4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
moduleIndex
A unique value for each module within the chassis.
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.1
moduleStatus
The operational status of the module. If the status is not ok, the value of moduleTestResult gives more detailed information about the module's failure condition(s).
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.10
moduleTestResult
The result of the module's self test. A zero indicates that the module passed all tests. Bits set in the result indicate error conditions.
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.11
moduleAction
This object, when read, returns one of the following results: other(1): module permanently enabled enable(3): module currently enabled disable(4): module currently …
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.12
moduleName
A descriptive string used by the network administrator to name the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.13
moduleNumPorts
The number of ports supported by the module.
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.14
modulePortStatus
A series of bytes containing status information about the module and each of the ports on the module. The first byte contains the status for the module (same value as moduleStatus…
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.15
moduleSubType
The type of daughterboard attached to this module.
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.16
moduleModel
The manufacturer's model number for the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.17
moduleHwVersion
The hardware version of the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.18
moduleFwVersion
The firmware version of the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.19
moduleType
The type of module.
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.2
moduleSwVersion
The software version of the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.20
moduleStandbyStatus
Redundant status of a module that supports redundancy.
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.21
moduleIPAddress
If the module has a separate IP address to reach it by, then it is reported here. Otherwise, this object has a value of '00000000H'.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.9.5.1.3.1.1.22
moduleIPAddressVlan
If the moduleIPAddress is valid then this object reports the VLAN to access that IP address on. Otherwise this object has a value of zero.
columnCISCO-VTP-MIBVlanIndex.1.3.6.1.4.1.9.5.1.3.1.1.23
moduleSlotNum
This value is determined by the chassis slot number where the module is located. Valid entries are 1 to the value of chassisNumSlots
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.25
moduleSerialNumberString
The serial number of the module. This MIB object will return the module serial number for any module that either a numeric or an alphanumeric serial number is being used.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.26
moduleEntPhysicalIndex
The value of the instance of the entPhysicalIndex object, defined in ENTITY-MIB, for the entity physical index corresponding to this module.
columnENTITY-MIBPhysicalIndex.1.3.6.1.4.1.9.5.1.3.1.1.27
moduleAdditionalStatus
The additional status of the module. fruInstalled(0) indicates that whether or not FRU is installed on the module. powerDenied(1) indicates that whet…
columnBits.1.3.6.1.4.1.9.5.1.3.1.1.28
moduleSerialNumber deprecated
The serial number of the module in a numeric format. If the module uses an alphanumeric serial number, this MIB object will return 0. This object is deprecated and …
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.3
moduleHwHiVersion deprecated
The high part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwHiVersion is 3. This object is deprecated and…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.4
moduleHwLoVersion deprecated
The low part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwLoVersion is 1. This object is deprecated and …
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.5
moduleFwHiVersion deprecated
The high part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwHiVersion is 3. This object is deprecated and replac…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.6
moduleFwLoVersion deprecated
The low part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwLoVersion is 1. This object is deprecated and replace…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.7
moduleSwHiVersion deprecated
The high part of the software version number. For example, if the software version is 3.1, the value of moduleSwHiVersion is 3. This object is deprecated and replac…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.8
moduleSwLoVersion deprecated
The low part of the software version number. For example, if the software version is 3.1, the value of moduleSwLoVersion is 1. This object is deprecated and replace…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.9