filterPortBroadcastThreshold
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.7.5.1.5
Object
column
r/w
Integer32
Indicates the integer part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterPortBroadcastThresholdFraction indicates the
fraction part of the maximum percentage of
available bandwidth allowed for incoming traffic
of the specific traffic types on this port. Either
packets of the specific traffic types are dropped
of the port is put into errdisable state depending
on the value of filterPortSuppressionViolation on
this port if the percentage of incoming traffic of
the specific traffic types would exceed this
limit. The traffic types that are enabled for
this traffic suppression feature is indicated by
filterPortBroadcastOption.
The maximum percentage for the combination of this
object value and the object value of
filterPortBroadcastThresholdFraction is 100.00
which indicates traffic of all traffic types
should not be limited.
The ability to suppress traffic in this manner
exists only on certain ports. If it does not
exist on this port, attempts to write a value of
this object other than 100 are rejected.
On platforms where filterPortSuppressionOption
object is not supported, this object only applies
to broadcast suppression.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.7.5.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- filterPortEntry
- Table
- filterPortTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| filterPortModule An index value that uniquely identifies the
module where this port is located
(see portModuleIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.1 |
| filterPort An index value that uniquely identifies this port
within a module (see portIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.2 |
| filterPortComplex A complex expression made up of the numbers 1
through 8 indicating test results from
filterTestIndex and using logical operators '&'
(and), '|' (or), '!' (not), and parenthesis. F… | column | OctetString | .1.3.6.1.4.1.9.5.1.7.5.1.3 |
| filterPortBroadcastThrottle The maximum number of broadcast packets per
second allowed on this port. If the number of
incoming broadcast packets in a one second
interval exceeds this amount, packets are
drop… | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.4 |
| filterPortBroadcastDiscards The number of packets discarded due to traffic
suppression on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.5.1.7.5.1.6 |
| filterPortBroadcastThresholdFraction Indicates the fraction part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterP… | column | one-hundredths Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.7 |
| filterPortSuppressionOption Indicates the traffic types that traffic
suppression feature is enabled for.
multicast(0) is set when multicast suppression is
enabled. unicast(1) is set when unica… | column | Bits | .1.3.6.1.4.1.9.5.1.7.5.1.8 |
| filterPortSuppressionViolation Indicates the action that will be taken on this
port when the percentage of either broadcast,
multicast or unicast traffic exceeds the limit as
indicated by filterPortBroadcastThr… | column | Enumeration | .1.3.6.1.4.1.9.5.1.7.5.1.9 |