vlanPortOperStatus
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.9.3.1.11
Object
column
Enumeration
An indication of the current VLAN status of the port. A status of inactive(1) indicates that a dynamic port does not yet have a VLAN assigned or that a static or dynamic port has been assigned a VLAN that is not currently active. A status of active(2) indicates that the currently assigned VLAN is active. A status of shutdown(3) indicates that the port has been shutdown as a result of a VMPS response on a dynamic port. A status of vlanActiveFault(4) only applies to tokenring ports and indicates that the port is operationally disabled because the TR-CRF VLAN of which the port is a member has active ports on another device and only ports on that remote device may participate in that TR-CRF VLAN.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.9.3.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vlanPortEntry
- Table
- vlanPortTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | inactive |
2 | active |
3 | shutdown |
4 | vlanActiveFault |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vlanPortModule An index value that uniquely identifies the
module where this port is located
(see portModuleIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.9.3.1.1 |
| vlanPortAdminStatus Indicates whether the port will get assigned to a
VLAN statically or dynamically. When it is set to
dynamic, the needed information will be accessed
from one of the Vlan Membershi… | column | Enumeration | .1.3.6.1.4.1.9.5.1.9.3.1.10 |
| vlanPortAuxiliaryVlan deprecated The Voice Virtual Vlan ID (VVID) to which this
port belongs to.
If the VVID is not supported on the port, this MIB
object will not be configurable and will return
4096.
… | column | Integer32 | .1.3.6.1.4.1.9.5.1.9.3.1.12 |
| vlanPort An index value that uniquely identifies this port
within a module (see portIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.9.3.1.2 |
| vlanPortVlan The Virtual LAN to which this port belongs. | column | CISCO-VTP-MIBVlanIndex | .1.3.6.1.4.1.9.5.1.9.3.1.3 |
| vlanPortIslVlansAllowed An indication of which Virtual LANs are allowed
on this Inter-Switch Link. This is an octet string
value with bits set to indicate allowed VLANs. It
can be interpreted as a sum of… | column | OctetString | .1.3.6.1.4.1.9.5.1.9.3.1.5 |
| vlanPortSwitchLevel Indicates the priority level the port uses to
access the switching media. If vlanPortSwitchLevel
is not applicable to the port, notApplicable(3)
will be returned by the device. | column | Enumeration | .1.3.6.1.4.1.9.5.1.9.3.1.6 |
| vlanPortIslAdminStatus Indicates the administrative status set on the
trunk port while the operational status is the one
that indicates whether the port is actually
trunking or not. If the status is set… | column | Enumeration | .1.3.6.1.4.1.9.5.1.9.3.1.7 |
| vlanPortIslOperStatus Indicates if the port is actually trunking or
not. In the case of ISL capable ports, the status
depends on the success or failure of the
negotiation process initiated by the port … | column | Enumeration | .1.3.6.1.4.1.9.5.1.9.3.1.8 |
| vlanPortIslPriorityVlans An indication of which Virtual LANs have a better
dot1dStpPortPriority value. This object can be
used to perform load balancing on Inter-Switch
Links via spanning tree. An Inter-S… | column | OctetString | .1.3.6.1.4.1.9.5.1.9.3.1.9 |