filterPortBroadcastThresholdFraction
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.7.5.1.7
Object
column
r/w
one-hundredths Integer32
Indicates the fraction part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterPortBroadcastThreshold indicates the integer
part of the maximum percentage of available
bandwidth allowed for incoming traffic of the
specific traffic types on this port. Either
packets of the specific traffic types are dropped
or the port is put into errdisable state
depending on the value of
filterPortSuppressionViolation on this port if the
percentage of incoming traffic of the specific
traffic type would exceed this limit. The
traffic types that are enabled for this traffic
suppression feature is indicated by
filterPortBroadcastOption.
The maximum percentage for the combination
of this object value and the object value of
filterPortBroadcastThreshold is 100.00 which
indicates traffic of all traffic types should not
be limited.
The ability to suppress traffic in this manner
exists only on certain ports. If it does not exist
on this port, attempts to write a value of this
object other than 100 are rejected.
On platforms where filterPortSuppressionOption
object is not supported, this object only applies
to broadcast suppression.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.7.5.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- one-hundredths
- Parent
- filterPortEntry
- Table
- filterPortTable
- Siblings
- 8
Syntax
one-hundredths Integer32
Values & Constraints
Object Constraints
range: 0-99
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| filterPortModule An index value that uniquely identifies the
module where this port is located
(see portModuleIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.1 |
| filterPort An index value that uniquely identifies this port
within a module (see portIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.2 |
| filterPortComplex A complex expression made up of the numbers 1
through 8 indicating test results from
filterTestIndex and using logical operators '&'
(and), '|' (or), '!' (not), and parenthesis. F… | column | OctetString | .1.3.6.1.4.1.9.5.1.7.5.1.3 |
| filterPortBroadcastThrottle The maximum number of broadcast packets per
second allowed on this port. If the number of
incoming broadcast packets in a one second
interval exceeds this amount, packets are
drop… | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.4 |
| filterPortBroadcastThreshold Indicates the integer part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterPo… | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.5 |
| filterPortBroadcastDiscards The number of packets discarded due to traffic
suppression on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.5.1.7.5.1.6 |
| filterPortSuppressionOption Indicates the traffic types that traffic
suppression feature is enabled for.
multicast(0) is set when multicast suppression is
enabled. unicast(1) is set when unica… | column | Bits | .1.3.6.1.4.1.9.5.1.7.5.1.8 |
| filterPortSuppressionViolation Indicates the action that will be taken on this
port when the percentage of either broadcast,
multicast or unicast traffic exceeds the limit as
indicated by filterPortBroadcastThr… | column | Enumeration | .1.3.6.1.4.1.9.5.1.7.5.1.9 |