moduleStandbyStatus
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.3.1.1.21
Object
column
Enumeration
Redundant status of a module that supports redundancy.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.3.1.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- moduleEntry
- Table
- moduleTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | active |
3 | standby |
4 | error |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| moduleIndex A unique value for each module within the
chassis. | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.1 |
| moduleStatus The operational status of the module. If the
status is not ok, the value of moduleTestResult
gives more detailed information about the
module's failure condition(s). | column | Enumeration | .1.3.6.1.4.1.9.5.1.3.1.1.10 |
| moduleTestResult The result of the module's self test. A zero
indicates that the module passed all tests. Bits
set in the result indicate error conditions. | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.11 |
| moduleAction This object, when read, returns one of the
following results:
other(1): module permanently enabled
enable(3): module currently enabled
disable(4): module currently … | column | Enumeration | .1.3.6.1.4.1.9.5.1.3.1.1.12 |
| moduleName A descriptive string used by the network
administrator to name the module. | column | OctetString | .1.3.6.1.4.1.9.5.1.3.1.1.13 |
| moduleNumPorts The number of ports supported by the module. | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.14 |
| modulePortStatus A series of bytes containing status information
about the module and each of the ports on the
module.
The first byte contains the status for the module
(same value as moduleStatus… | column | OctetString | .1.3.6.1.4.1.9.5.1.3.1.1.15 |
| moduleSubType The type of daughterboard attached to this
module. | column | Enumeration | .1.3.6.1.4.1.9.5.1.3.1.1.16 |
| moduleModel The manufacturer's model number for the module. | column | OctetString | .1.3.6.1.4.1.9.5.1.3.1.1.17 |
| moduleHwVersion The hardware version of the module. | column | OctetString | .1.3.6.1.4.1.9.5.1.3.1.1.18 |
| moduleFwVersion The firmware version of the module. | column | OctetString | .1.3.6.1.4.1.9.5.1.3.1.1.19 |
| moduleType The type of module. | column | Enumeration | .1.3.6.1.4.1.9.5.1.3.1.1.2 |
| moduleSwVersion The software version of the module. | column | OctetString | .1.3.6.1.4.1.9.5.1.3.1.1.20 |
| moduleIPAddress If the module has a separate IP address to
reach it by, then it is reported here.
Otherwise, this object has a value of
'00000000H'. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.5.1.3.1.1.22 |
| moduleIPAddressVlan If the moduleIPAddress is valid then this
object reports the VLAN to access that IP
address on. Otherwise this object has a value
of zero. | column | CISCO-VTP-MIBVlanIndex | .1.3.6.1.4.1.9.5.1.3.1.1.23 |
| moduleSubType2 The type of daughterboard attached to this
module. | column | Enumeration | .1.3.6.1.4.1.9.5.1.3.1.1.24 |
| moduleSlotNum This value is determined by the chassis slot
number where the module is located. Valid entries
are 1 to the value of chassisNumSlots | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.25 |
| moduleSerialNumberString The serial number of the module. This MIB object
will return the module serial number for any
module that either a numeric or an alphanumeric
serial number is being used. | column | OctetString | .1.3.6.1.4.1.9.5.1.3.1.1.26 |
| moduleEntPhysicalIndex The value of the instance of the entPhysicalIndex
object, defined in ENTITY-MIB, for the entity
physical index corresponding to this module. | column | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.9.5.1.3.1.1.27 |
| moduleAdditionalStatus The additional status of the module.
fruInstalled(0) indicates that whether or not
FRU is installed on the module.
powerDenied(1) indicates that whet… | column | Bits | .1.3.6.1.4.1.9.5.1.3.1.1.28 |
| moduleSerialNumber deprecated The serial number of the module in a numeric
format. If the module uses an alphanumeric serial
number, this MIB object will return 0.
This object is deprecated and … | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.3 |
| moduleHwHiVersion deprecated The high part of the hardware version of the
module.
For example, if the hardware version is 3.1, the
value of moduleHwHiVersion is 3.
This object is deprecated and… | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.4 |
| moduleHwLoVersion deprecated The low part of the hardware version of the
module.
For example, if the hardware version is 3.1, the
value of moduleHwLoVersion is 1.
This object is deprecated and … | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.5 |
| moduleFwHiVersion deprecated The high part of the firmware version number. For
example, if the firmware version is 3.1, the value
of moduleFwHiVersion is 3.
This object is deprecated and replac… | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.6 |
| moduleFwLoVersion deprecated The low part of the firmware version number. For
example, if the firmware version is 3.1, the value
of moduleFwLoVersion is 1.
This object is deprecated and replace… | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.7 |
| moduleSwHiVersion deprecated The high part of the software version number. For
example, if the software version is 3.1, the value
of moduleSwHiVersion is 3.
This object is deprecated and replac… | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.8 |
| moduleSwLoVersion deprecated The low part of the software version number. For
example, if the software version is 3.1, the value
of moduleSwLoVersion is 1.
This object is deprecated and replace… | column | Integer32 | .1.3.6.1.4.1.9.5.1.3.1.1.9 |