portTopNTimeRemaining
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.20.1.1.7
Object
column
Integer32
The number of seconds left in the report
currently being collected. When portTopNDuration
object is modified by the management station, a
new collection is started, possibly aborting a
currently running report. The new value is used as
the requested duration of this report, which is
loaded from the associated portTopNDuration
object.
When this object is a non-zero value, any
associated portTopNEntries shall be made
inaccessible by the monitor.
While the value of this object is non-zero and the
corresponding portTopNControlENtry is valid, it
decrements by one per second until it reaches
zero. During this time, all associated
portTopNEntries shall remain inaccessible. At
the time that this object decrements to zero, the
report is made accessible in the portTopNTable.
Thus, the portTopN table is to be created only at
the end of the collection interval.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.20.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- portTopNControlEntry
- Table
- portTopNControlTable
- Siblings
- 11
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portTopNControlIndex An index that uniquely identifies an entry
in the portTopNControl table. Each such
entry defines one top N report. | column | Integer32 | .1.3.6.1.4.1.9.5.1.20.1.1.1 |
| portTopNGrantedSize The maximum number of ports in the top N table.
When the associated portTopNRequestedSize object
is created or modified, the value of this object
should be set as closely to the r… | column | Integer32 | .1.3.6.1.4.1.9.5.1.20.1.1.10 |
| portTopNOwner The entity that configured this entry and is
therefore using the resources assigned to it. | column | IF-MIBOwnerString | .1.3.6.1.4.1.9.5.1.20.1.1.11 |
| portTopNStatus The status of this portTopNControl entry.
The Management station sends the user set values
with a portTopNStatus value of createAndGo(4).
When the agent receives it the collection… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.5.1.20.1.1.12 |
| portTopNRateBase The variable for all ports in this system
based on which portTopNTable/report is ordered.
This object may not be modified if the associated
portTopNStatus object is… | column | Enumeration | .1.3.6.1.4.1.9.5.1.20.1.1.2 |
| portTopNType The sampling port type.
This object may not be modified if the associated
portTopNStatus object is equal to active(1). | column | Enumeration | .1.3.6.1.4.1.9.5.1.20.1.1.3 |
| portTopNMode The running mode of this portTopN control entry.
portTopNForeground (1) means when
portTopNTimeRemaining reaches to 0, the report
will show on the CLI at once and it won't be kept… | column | Enumeration | .1.3.6.1.4.1.9.5.1.20.1.1.4 |
| portTopNReportStatus The report status of this portTopN control entry.
Progressing (1) means that the report of this
portTopN control entry is still in progress. The
management station can poll this m… | column | Enumeration | .1.3.6.1.4.1.9.5.1.20.1.1.5 |
| portTopNDuration The sampling interval in seconds during which
statistics are collected for this report.
When this is set a value and the corresponding
portTopNControlEntry is valid… | column | Integer32 | .1.3.6.1.4.1.9.5.1.20.1.1.6 |
| portTopNStartTime The value of sysUpTime when this top N report was
last started. In other words, this is the time
that the associated portTopNTimeRemaining object
was modified to start the request… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.5.1.20.1.1.8 |
| portTopNRequestedSize The maximum number of ports requested for the top
N entry.
When this object is created or modified, the value
of portTopNGrantedSize is set as closely to this
objec… | column | Integer32 | .1.3.6.1.4.1.9.5.1.20.1.1.9 |