portCpbSpan
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.19.1.1.16
Object
column
Bits
Indicates port span capabilities. source(0) denotes the capability of being SPAN source destination(1) denotes the capability of being SPAN destination, reflector(2) denotes the capability of being SPAN reflector.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.19.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- portCpbEntry
- Table
- portCpbTable
- Siblings
- 20
Syntax
Bits
Values & Constraints
Enumerated Values
0 | source |
1 | destination |
2 | reflector |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portCpbModuleIndex An index value that uniquely identifies the
module where this port is located (see
portModuleIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.19.1.1.1 |
| portCpbSecurity Indicates whether a port supports security. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.10 |
| portCpbVlanMembership Indicates the vlan membership capability of a
port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.11 |
| portCpbPortfast Indicates whether a port supports portfast. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.12 |
| portCpbUdld Indicates whether the port is capable of UDLD
(UniDirectional Link Detection) or not. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.13 |
| portCpbInlinePower Indicate the inline power capability of a port.
'auto' denotes the ability that the switch
automatically determines whether or not power
should be provided. 'on' denotes the abili… | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.14 |
| portCpbAuxiliaryVlan Indicate the voice vlan capability of a port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.15 |
| portCpbCosRewrite Indicates whether a port supports CoS rewrite. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.17 |
| portCpbTosRewrite Indicates the ToS rewrite capability of a port.
dscp(0) denotes the port capability to classify
packets according to the DSCP.
ipPrecedence(1) denotes the port capability to
class… | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.18 |
| portCpbCopsGrouping The set of ports on a module that are configured
together as far as the Differentiated Services
Cops feature is concerned. Each Octet within the
value of this object specifies a s… | column | OctetString | .1.3.6.1.4.1.9.5.1.19.1.1.19 |
| portCpbPortIndex An index value that uniquely identifies this port
within a module (see portIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.19.1.1.2 |
| portCpbDot1x Indicates whether a port supports 802.1x. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.20 |
| portCpbIgmpFilter Indicates whether a port supports IGMP filter. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.21 |
| portCpbSpeed Indicates the port speed capability of a port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.3 |
| portCpbDuplex Indicates the duplex capability of a port.
The fdx(4) is specially for tokenring full-duplex
and hdx(3) is specially for tokenring
half-duplex. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.4 |
| portCpbTrunkEncapsulationType Indicates the VLAN encapsulation capability of a
port, The dot10(1) is for 801.10 and dot1q(2) is
for 801.1Q. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.5 |
| portCpbTrunkMode Indicates the trunk capability of a port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.6 |
| portCpbChannel Indicates the channelling capability of a port. | column | OctetString | .1.3.6.1.4.1.9.5.1.19.1.1.7 |
| portCpbBroadcastSuppression Indicates the broadcast suppression capability of
a port. The pps(0) is for ports capable of
specifying suppression in packets per second and
percentage(1) is for ports capable of… | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.8 |
| portCpbFlowControl Indicates the flow control capability of a port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.9 |