filterPortBroadcastThrottle
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.7.5.1.4
Object
column
r/w
Integer32
The maximum number of broadcast packets per
second allowed on this port. If the number of
incoming broadcast packets in a one second
interval exceeds this amount, packets are
dropped for the rest of the interval. If the
capability exists, only broadcast packets should
be dropped. Otherwise, all packets are dropped
during the suppression interval.
A value of 0 indicates broadcast packets should
not be limited.
The ability to suppress broadcast packets in this
manner exists only on certain ports. If it does
not exist on this port, attempts to write a value
other than 0 are rejected.
This object also applies to multicast (and/or)
unicast suppression when
filterPortSuppressionOption is enabled.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.7.5.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- filterPortEntry
- Table
- filterPortTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-150000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| filterPortModule An index value that uniquely identifies the
module where this port is located
(see portModuleIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.1 |
| filterPort An index value that uniquely identifies this port
within a module (see portIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.2 |
| filterPortComplex A complex expression made up of the numbers 1
through 8 indicating test results from
filterTestIndex and using logical operators '&'
(and), '|' (or), '!' (not), and parenthesis. F… | column | OctetString | .1.3.6.1.4.1.9.5.1.7.5.1.3 |
| filterPortBroadcastThreshold Indicates the integer part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterPo… | column | Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.5 |
| filterPortBroadcastDiscards The number of packets discarded due to traffic
suppression on this port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.5.1.7.5.1.6 |
| filterPortBroadcastThresholdFraction Indicates the fraction part of the maximum
percentage of available bandwidth allowed for
incoming traffic of the specific traffic types on
this port. The associated object
filterP… | column | one-hundredths Integer32 | .1.3.6.1.4.1.9.5.1.7.5.1.7 |
| filterPortSuppressionOption Indicates the traffic types that traffic
suppression feature is enabled for.
multicast(0) is set when multicast suppression is
enabled. unicast(1) is set when unica… | column | Bits | .1.3.6.1.4.1.9.5.1.7.5.1.8 |
| filterPortSuppressionViolation Indicates the action that will be taken on this
port when the percentage of either broadcast,
multicast or unicast traffic exceeds the limit as
indicated by filterPortBroadcastThr… | column | Enumeration | .1.3.6.1.4.1.9.5.1.7.5.1.9 |