traceRouteQueryStatus
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.24.2.1.24
Object
column
r/w
Enumeration
The status object used to manage rows in this table. When set this object to valid(1), the query is initiated. Once initiated, all the read-write objects of this table can't be modified. To remove an entry from the table, set this object to invalid(2).
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.24.2.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- traceRouteQueryEntry
- Table
- traceRouteQueryTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | valid |
2 | invalid |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| traceRouteQueryIndex Object which specifies an unique entry in the
traceRouteQueryTable. | column | Integer32 | .1.3.6.1.4.1.9.5.1.24.2.1.1 |
| traceRouteQueryTOS The type of service to be set in the IP header of
the outgoing packets.This value can set to see if
different types-of-service result in different
paths. Not all values of TOS are… | column | Integer32 | .1.3.6.1.4.1.9.5.1.24.2.1.10 |
| traceRouteHost Network(IP) address in dotted decimal format or
the DNS hostname of the host which is tracerouted. | column | OctetString | .1.3.6.1.4.1.9.5.1.24.2.1.2 |
| traceRouteQueryResult The result status of the query. Possible values
are:
-1 -Either the query has not been initiated or the
agent is busy processing this query instance. Time
to comple… | column | Integer32 | .1.3.6.1.4.1.9.5.1.24.2.1.21 |
| traceRouteQueryTime The value of sysUpTime at the time when the query
is configured. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.5.1.24.2.1.22 |
| traceRouteQueryOwner The manager entity that configured this entry and
is therefore using the resources assigned to it. | column | OctetString | .1.3.6.1.4.1.9.5.1.24.2.1.23 |
| traceRouteQueryDNSEnable If this value of this object is true, the
traceroute operation will do a DNS lookup for each
hop on the path, so the corresponding instance of
the traceRouteDataTable will contain… | column | Enumeration | .1.3.6.1.4.1.9.5.1.24.2.1.3 |
| traceRouteQueryWaitingTime The trace route waiting time in seconds for an
ICMP response message. | column | seconds Integer32 | .1.3.6.1.4.1.9.5.1.24.2.1.4 |
| traceRouteQueryInitTTL If this value of this object is set, it allows
users skip processing for gateways that are less
than traceRouteQueryInitTTL away by sending
datagram with the value of this object … | column | Integer32 | .1.3.6.1.4.1.9.5.1.24.2.1.5 |
| traceRouteQueryMaxTTL The maximum TTL value used in outgoing packets. | column | Integer32 | .1.3.6.1.4.1.9.5.1.24.2.1.6 |
| traceRouteQueryUDPPort The base UDP destination port is used in the
traceroute datagrams. This value of this object is
often larger than 30,000 to make it improbable
that this port is used (this causes … | column | Integer32 | .1.3.6.1.4.1.9.5.1.24.2.1.7 |
| traceRouteQueryPacketCount Specifies the number of traceroute packets to
send to the target host in this sequence. | column | Integer32 | .1.3.6.1.4.1.9.5.1.24.2.1.8 |
| traceRouteQueryPacketSize Specifies the size of traceroute packets to send
to the target host in this sequence. | column | Integer32 | .1.3.6.1.4.1.9.5.1.24.2.1.9 |