moduleSubType

CISCO-STACK-MIB · .1.3.6.1.4.1.9.5.1.3.1.1.16
MIB view Table view

Object

column Enumeration 
The type of daughterboard attached to this
module.

Context

MIB
CISCO-STACK-MIB
OID
.1.3.6.1.4.1.9.5.1.3.1.1.16
Type
column
Access
readonly
Status
current
Parent
moduleEntry
Table
moduleTable
Siblings
27

Syntax

Enumeration

Values & Constraints

Enumerated Values
1other
2empty
3wsf5510
4wsf5511
6wsx5304
7wsf5520
8wsf5521
9wsf5531
100wsf6020
101wsf6020a
102wsf6kpfc
103wsf6kpfc2
104wsf6kvpwr
105wsf6kdfc
106wsf6kpfc2a
107wsf6kdfca
200vsp300dfc
201wsf6kpfc3a
202wsf6kdfc3a
203wsf6700dfc3a
205wsf6kdfc3bxl
206wsf6kpfc3bxl
207wsf6700dfc3bxl
208wsf6700cfc
213m7600pfc3c
216wsf6kpfc3b
217wsf6700dfc3b
218wsf6700dfc3c
221wsf6700dfc3cxl
223wsf6kdfc3b
224mec6524pfc3c
225sip600earl
226vsf6kpfc3cxl
227vsf6kpfc3c
228c7600esmdfc3cxl
229vsf6kpfc4
230c7600esmdfc3c
231wsf6kdfc4exl
232c7600Es3cxl
233c7600Es3c
234wsf6kdfc4e
235vsf6kpfc4xl
236wsf6kdfc4axl
237wsf6kdfc4a
238c6880xpfc
239c6880xlepfc
240c6880xdfc
241c6880xledfc

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
moduleIndex
A unique value for each module within the chassis.
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.1
moduleStatus
The operational status of the module. If the status is not ok, the value of moduleTestResult gives more detailed information about the module's failure condition(s).
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.10
moduleTestResult
The result of the module's self test. A zero indicates that the module passed all tests. Bits set in the result indicate error conditions.
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.11
moduleAction
This object, when read, returns one of the following results: other(1): module permanently enabled enable(3): module currently enabled disable(4): module currently …
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.12
moduleName
A descriptive string used by the network administrator to name the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.13
moduleNumPorts
The number of ports supported by the module.
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.14
modulePortStatus
A series of bytes containing status information about the module and each of the ports on the module. The first byte contains the status for the module (same value as moduleStatus…
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.15
moduleModel
The manufacturer's model number for the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.17
moduleHwVersion
The hardware version of the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.18
moduleFwVersion
The firmware version of the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.19
moduleType
The type of module.
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.2
moduleSwVersion
The software version of the module.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.20
moduleStandbyStatus
Redundant status of a module that supports redundancy.
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.21
moduleIPAddress
If the module has a separate IP address to reach it by, then it is reported here. Otherwise, this object has a value of '00000000H'.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.9.5.1.3.1.1.22
moduleIPAddressVlan
If the moduleIPAddress is valid then this object reports the VLAN to access that IP address on. Otherwise this object has a value of zero.
columnCISCO-VTP-MIBVlanIndex.1.3.6.1.4.1.9.5.1.3.1.1.23
moduleSubType2
The type of daughterboard attached to this module.
columnEnumeration.1.3.6.1.4.1.9.5.1.3.1.1.24
moduleSlotNum
This value is determined by the chassis slot number where the module is located. Valid entries are 1 to the value of chassisNumSlots
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.25
moduleSerialNumberString
The serial number of the module. This MIB object will return the module serial number for any module that either a numeric or an alphanumeric serial number is being used.
columnOctetString.1.3.6.1.4.1.9.5.1.3.1.1.26
moduleEntPhysicalIndex
The value of the instance of the entPhysicalIndex object, defined in ENTITY-MIB, for the entity physical index corresponding to this module.
columnENTITY-MIBPhysicalIndex.1.3.6.1.4.1.9.5.1.3.1.1.27
moduleAdditionalStatus
The additional status of the module. fruInstalled(0) indicates that whether or not FRU is installed on the module. powerDenied(1) indicates that whet…
columnBits.1.3.6.1.4.1.9.5.1.3.1.1.28
moduleSerialNumber deprecated
The serial number of the module in a numeric format. If the module uses an alphanumeric serial number, this MIB object will return 0. This object is deprecated and …
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.3
moduleHwHiVersion deprecated
The high part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwHiVersion is 3. This object is deprecated and…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.4
moduleHwLoVersion deprecated
The low part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwLoVersion is 1. This object is deprecated and …
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.5
moduleFwHiVersion deprecated
The high part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwHiVersion is 3. This object is deprecated and replac…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.6
moduleFwLoVersion deprecated
The low part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwLoVersion is 1. This object is deprecated and replace…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.7
moduleSwHiVersion deprecated
The high part of the software version number. For example, if the software version is 3.1, the value of moduleSwHiVersion is 3. This object is deprecated and replac…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.8
moduleSwLoVersion deprecated
The low part of the software version number. For example, if the software version is 3.1, the value of moduleSwLoVersion is 1. This object is deprecated and replace…
columnInteger32.1.3.6.1.4.1.9.5.1.3.1.1.9