portCpbTrunkEncapsulationType
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.19.1.1.5
Object
column
Bits
Indicates the VLAN encapsulation capability of a port, The dot10(1) is for 801.10 and dot1q(2) is for 801.1Q.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.19.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- portCpbEntry
- Table
- portCpbTable
- Siblings
- 20
Syntax
Bits
Values & Constraints
Enumerated Values
0 | lane |
1 | dot10 |
2 | dot1Q |
3 | isl |
4 | negotiate |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portCpbModuleIndex An index value that uniquely identifies the
module where this port is located (see
portModuleIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.19.1.1.1 |
| portCpbSecurity Indicates whether a port supports security. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.10 |
| portCpbVlanMembership Indicates the vlan membership capability of a
port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.11 |
| portCpbPortfast Indicates whether a port supports portfast. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.12 |
| portCpbUdld Indicates whether the port is capable of UDLD
(UniDirectional Link Detection) or not. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.13 |
| portCpbInlinePower Indicate the inline power capability of a port.
'auto' denotes the ability that the switch
automatically determines whether or not power
should be provided. 'on' denotes the abili… | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.14 |
| portCpbAuxiliaryVlan Indicate the voice vlan capability of a port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.15 |
| portCpbSpan Indicates port span capabilities.
source(0) denotes the capability of being SPAN
source destination(1) denotes the capability of
being SPAN destination, reflector(2) denotes the
c… | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.16 |
| portCpbCosRewrite Indicates whether a port supports CoS rewrite. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.17 |
| portCpbTosRewrite Indicates the ToS rewrite capability of a port.
dscp(0) denotes the port capability to classify
packets according to the DSCP.
ipPrecedence(1) denotes the port capability to
class… | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.18 |
| portCpbCopsGrouping The set of ports on a module that are configured
together as far as the Differentiated Services
Cops feature is concerned. Each Octet within the
value of this object specifies a s… | column | OctetString | .1.3.6.1.4.1.9.5.1.19.1.1.19 |
| portCpbPortIndex An index value that uniquely identifies this port
within a module (see portIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.19.1.1.2 |
| portCpbDot1x Indicates whether a port supports 802.1x. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.20 |
| portCpbIgmpFilter Indicates whether a port supports IGMP filter. | column | Enumeration | .1.3.6.1.4.1.9.5.1.19.1.1.21 |
| portCpbSpeed Indicates the port speed capability of a port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.3 |
| portCpbDuplex Indicates the duplex capability of a port.
The fdx(4) is specially for tokenring full-duplex
and hdx(3) is specially for tokenring
half-duplex. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.4 |
| portCpbTrunkMode Indicates the trunk capability of a port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.6 |
| portCpbChannel Indicates the channelling capability of a port. | column | OctetString | .1.3.6.1.4.1.9.5.1.19.1.1.7 |
| portCpbBroadcastSuppression Indicates the broadcast suppression capability of
a port. The pps(0) is for ports capable of
specifying suppression in packets per second and
percentage(1) is for ports capable of… | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.8 |
| portCpbFlowControl Indicates the flow control capability of a port. | column | Bits | .1.3.6.1.4.1.9.5.1.19.1.1.9 |