vlanPortAuxiliaryVlan
CISCO-STACK-MIB ·
.1.3.6.1.4.1.9.5.1.9.3.1.12
Object
column
deprecated
r/w
Integer32
The Voice Virtual Vlan ID (VVID) to which this
port belongs to.
If the VVID is not supported on the port, this MIB
object will not be configurable and will return
4096.
Setting this MIB object to 4096, the CDP packets
transmitting through this port would not include
Appliance VLAN-ID TLV.
Setting this MIB object to 4095, the CDP packets
transmitting through this port would contain
Appliance VLAN-ID TLV with value of 4095 - VoIP
and related packets are expected to be sent and
received untagged without an 802.1p priority.
Setting this MIB object to 0, the CDP packets
transmitting through this port would contain
Appliance VLAN-ID TLV with value of 0 - VoIP
and related packets are expected to be sent and
received with VLAN-id=0 and an 802.1p priority.
Setting this MIB object to N (1..1000|1025..4094),
the CDP packets transmitting through this port
would contain Appliance VLAN-ID TLV with N - VoIP
and related packets are expected to be sent and
received with VLAN-id=N and an 802.1p priority.
This object is deprecated and replaced by
vmVoiceVlanId in CISCO-VLAN-MEMBERSHIP-MIB.
Context
- MIB
- CISCO-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.1.9.3.1.12- Type
- column
- Access
- readwrite
- Status
- deprecated
- Parent
- vlanPortEntry
- Table
- vlanPortTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1000
range: 1025-4096
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vlanPortModule An index value that uniquely identifies the
module where this port is located
(see portModuleIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.9.3.1.1 |
| vlanPortAdminStatus Indicates whether the port will get assigned to a
VLAN statically or dynamically. When it is set to
dynamic, the needed information will be accessed
from one of the Vlan Membershi… | column | Enumeration | .1.3.6.1.4.1.9.5.1.9.3.1.10 |
| vlanPortOperStatus An indication of the current VLAN status of the
port.
A status of inactive(1) indicates that a dynamic
port does not yet have a VLAN assigned or that a
static or dynamic port has … | column | Enumeration | .1.3.6.1.4.1.9.5.1.9.3.1.11 |
| vlanPort An index value that uniquely identifies this port
within a module (see portIndex). | column | Integer32 | .1.3.6.1.4.1.9.5.1.9.3.1.2 |
| vlanPortVlan The Virtual LAN to which this port belongs. | column | CISCO-VTP-MIBVlanIndex | .1.3.6.1.4.1.9.5.1.9.3.1.3 |
| vlanPortIslVlansAllowed An indication of which Virtual LANs are allowed
on this Inter-Switch Link. This is an octet string
value with bits set to indicate allowed VLANs. It
can be interpreted as a sum of… | column | OctetString | .1.3.6.1.4.1.9.5.1.9.3.1.5 |
| vlanPortSwitchLevel Indicates the priority level the port uses to
access the switching media. If vlanPortSwitchLevel
is not applicable to the port, notApplicable(3)
will be returned by the device. | column | Enumeration | .1.3.6.1.4.1.9.5.1.9.3.1.6 |
| vlanPortIslAdminStatus Indicates the administrative status set on the
trunk port while the operational status is the one
that indicates whether the port is actually
trunking or not. If the status is set… | column | Enumeration | .1.3.6.1.4.1.9.5.1.9.3.1.7 |
| vlanPortIslOperStatus Indicates if the port is actually trunking or
not. In the case of ISL capable ports, the status
depends on the success or failure of the
negotiation process initiated by the port … | column | Enumeration | .1.3.6.1.4.1.9.5.1.9.3.1.8 |
| vlanPortIslPriorityVlans An indication of which Virtual LANs have a better
dot1dStpPortPriority value. This object can be
used to perform load balancing on Inter-Switch
Links via spanning tree. An Inter-S… | column | OctetString | .1.3.6.1.4.1.9.5.1.9.3.1.9 |