CM-FACILITY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

1,371

cmEthernetAccPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.1 · 1 row entry · 121 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetAccPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetAccPortTable'

A list of entries corresponding to Ethernet Access Port 
Facilities for configuration purposes.

cmEthernetAccPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.1.1

A conceptual row in the cmEthernetAccPortTable.

Indexes

ARISTA-SWAG-HOST-RESOURCES-MIBaristaSwagHrSystemMemberId

Column Syntax OID

cmEthernetAccPortIndex

An integer index value used to uniquely identify
this Ethernet Access Port within a card.
Note that each Ethernet Access Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, cmEthernetAccPortIndex…

Integer32

Constraints:
range: 0-6

.1.3.6.1.4.1.2544.1.12.4.1.1.1.1

cmEthernetAccPortIfIndex

This object has the same value as ifIndex for
Ethernet Access Port. An integer index value used to
uniquely identify this Ethernet Access Port.

IF-MIBInterfaceIndex

Constraints:
range: 0-6

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.2544.1.12.4.1.1.1.2

cmEthernetAccPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Constraints:
range: 0-16

.1.3.6.1.4.1.2544.1.12.4.1.1.1.3

cmEthernetAccPortAdminState

This object represents the Administrative State of the Ethernet
Access Port.

CM-COMMON-MIBAdminStater/w

Constraints:
range: 0-6

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.1.1.4

cmEthernetAccPortOperationalState

This object represents the Operational State of the Ethernet
Access Port.

CM-COMMON-MIBOperationalState

Constraints:
range: 0-6

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.1.1.5

cmEthernetAccPortSecondaryState

This object represents the Secondary State of the Ethernet
Access Port.

CM-COMMON-MIBSecondaryState

Constraints:
range: 0-6

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.1.1.6

cmEthernetAccPortMTU

This object provides the MTU on the Ethernet Access Port.
The object is made read-write for FSP150CC devices.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.1.1.7

cmEthernetAccPortMediaType

This object represents the type of Ethernet Media on the
Ethernet Access Port.

CM-COMMON-MIBEthernetMediaTyper/w

Type Values:

0	not-applicable
1	copper
2	fiber
3	coppersfp
4	auto
5	none

.1.3.6.1.4.1.2544.1.12.4.1.1.1.8

cmEthernetAccPortConfigSpeed

This object allows to configure the speed of the
Ethernet Access Port.

CM-COMMON-MIBEthernetPortSpeedr/w

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.1.1.9

cmEthernetAccPortNegotiatedSpeed

This object provides the negotiated speed of the
Ethernet Access Port.

CM-COMMON-MIBEthernetPortSpeed

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.1.1.10

cmEthernetAccPortMDIXType

This object allows management of MDIX property on
Ethernet Access Port.

CmEthernetMDIXTyper/w

Constraints:
range: 0-100

Type Values:

1	not-applicable
2	auto-mdix
3	crossed
4	uncrossed
5	notAvailable

.1.3.6.1.4.1.2544.1.12.4.1.1.1.11

cmEthernetAccPortJumboFramesEnabled

This object allows enabling/disabling jumbo frames support on
the Ethernet Access Port. This object is only applicable for
Ethernet Access Port on R3.1CM NTU Card.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.12

cmEthernetAccPortSfpVendorName

This object provides the vendor name of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.1.1.13

cmEthernetAccPortSfpPartNumber

This object provides the part number of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.1.1.14

cmEthernetAccPortSfpSerialNumber

This object provides the serial number of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.1.1.15

cmEthernetAccPortSfpDateOfManufacture

This object provides the date of manufacture of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.4.1.1.1.16

cmEthernetAccPortSfpConnectorValue

This object provides the SFP connector value.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.

CM-COMMON-MIBSfpConnectorValue

Type Values:

0	not-applicable
1	unknown
2	sc
3	fcs1cu
4	fcs2cu
5	bnc-tnc
6	fccoaxhdr
7	fjack
8	lc
9	mt-rj
10	mu
11	sg
12	optpigtail
13	hssdc
14	cupigtail
15	vendorspecific
16	rj45

.1.3.6.1.4.1.2544.1.12.4.1.1.1.17

cmEthernetAccPortInitiateDiag

This object allows to initiate Etherjack diagnosis on the
Ethernet Access Port.

CmEthernetDiagActionr/w

Type Values:

0	not-applicable
1	autoneg
2	cable
3	loopback
4	efm-oam-lpbk
5	all

.1.3.6.1.4.1.2544.1.12.4.1.1.1.18

cmEthernetAccPortDiagnosePair1Cond

This object provides diagnosis results for the cable Pair 1
on Ethernet Access Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.1.1.19

cmEthernetAccPortDiagnosePair2Cond

This object provides diagnosis results for the cable Pair 2
on Ethernet Access Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.1.1.20

cmEthernetAccPortDiagnosePair3Cond

This object provides diagnosis results for the cable Pair 3
on Ethernet Access Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.1.1.21

cmEthernetAccPortDiagnosePair4Cond

This object provides diagnosis results for the cable Pair 4
on Ethernet Access Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.1.1.22

cmEthernetAccPortDiagnoseAutoNegCond

This object provides auto negotiation results of the diagnosis
test on Ethernet Access Port.

CmDiagAutoNegCondType

Type Values:

0	not-applicable
1	autonegok
2	autonegfailed
3	autonegnotrun

.1.3.6.1.4.1.2544.1.12.4.1.1.1.23

cmEthernetAccPortDiagnoseLpbkCond

This object provides port loopback results of the diagnosis
test on Ethernet Access Port.

CmDiagLpbkCondType

Type Values:

0	not-applicable
1	lpbkok
2	lpbkfailed
3	lpbknotrun

.1.3.6.1.4.1.2544.1.12.4.1.1.1.24

cmEthernetAccPortDiagnoseEfmLpbkCond

This object provides remote EFM loopback results of the diagnosis
test on Ethernet Access Port.

CmDiagEfmOamLpbkCondType

Type Values:

0	not-applicable
1	efmlpbkok
2	efmlpbkfailed
3	efmlpbkfailednendNA
4	efmlpbkfailedfendNA
5	efmlpbknotrun

.1.3.6.1.4.1.2544.1.12.4.1.1.1.25

cmEthernetAccPortDiagnoseResult

This object provides results of the diagnosis
test in string form on Ethernet Access Port.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.1.1.26

cmEthernetAccPortDiagnoseTestStatus

This object provides the current status of the diagnosis
test on Ethernet Access Port.

CmDiagTestStatus

Type Values:

0	not-applicable
1	initial
2	in-progress
3	stopped
4	completed
5	aborted

.1.3.6.1.4.1.2544.1.12.4.1.1.1.27

cmEthernetAccPortDiagnoseTestTime

This object provides the time when diagnosis test was last executed.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.4.1.1.1.28

cmEthernetAccPortLoopbackConfig

This object allows to initiate loopbacks on
on the Ethernet Access Port.

CmLoopbackTyper/w

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.1.1.29

cmEthernetAccPortLoopbackStatus

This object provides status of the current loopback
on the Ethernet Access Port.

CmLoopbackType

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.1.1.30

cmEthernetAccPortLoopbackTime

This object allows to specify time for timed-loopbacks on
on the Ethernet Access Port.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.31

cmEthernetAccPortLoopbackSwapSADA

This object allows to specify whether or not the loopbacked
frame will have the Source Address and Destination Address
swapped.

CmSwapSADATyper/w

Type Values:

0	not-applicable
1	noswapSADA
2	swapSADA
3	swapDAOverrideSA
4	swapSADAMacOnly
5	swapDAOverridesSAMacOnly
6	swapIP
7	swapTCPUDP

.1.3.6.1.4.1.2544.1.12.4.1.1.1.32

cmEthernetAccPortOuterVlanLoopbackMask

This object allows specification of the outer VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loopback. The various bit positions are:
…

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.33

cmEthernetAccPortOuterVlanLoopback1

This object allows specification of the outer VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortOuterVlanLoopbackM…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.34

cmEthernetAccPortOuterVlanLoopback2

This object allows specification of the outer VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortOuterVlanLoopbackM…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.35

cmEthernetAccPortOuterVlanLoopback3

This object allows specification of the outer VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortOuterVlanLoopbackM…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.36

cmEthernetAccPortInnerVlanLoopbackMask

This object allows specification of the inner VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loopback. The various bit positions are:
…

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.37

cmEthernetAccPortInnerVlanLoopback1

This object allows specification of the inner VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortInnerVlanLoopbackM…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.38

cmEthernetAccPortInnerVlanLoopback2

This object allows specification of the inner VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortInnerVlanLoopbackM…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.39

cmEthernetAccPortInnerVlanLoopback3

This object allows specification of the inner VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortInnerVlanLoopbackM…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.40

cmEthernetAccPortLinkLossFwdEnabled

This object allows enabling/disabling link loss forwarding
on the Ethernet Access Port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.41

cmEthernetAccPortLinkLossFwdSignalTypedeprecated

This object allows definition of the link loss forwarding
signalling type. This is applicable only if
cmEthernetAccPortLinkLossFwdEnabled is enabled.
This object is applicable only for FSP150CM Release 3.1.
This objec…

CmLinkLossFwdSignalTyper/w

Type Values:

0	not-applicable
1	llf-efm-signal
2	llf-link-down
3	llf-odu-ais
4	llf-odu-lck
5	llf-odu-tim
6	llf-odu-bdi
7	llf-opu-plm
8	llf-opu-csf
9	llf-eth-epc

.1.3.6.1.4.1.2544.1.12.4.1.1.1.42

cmEthernetAccPortLinkLossFwdTriggerTypes

This object allows definition of the link loss forwarding
trigger types. This is applicable only if
cmEthernetAccPortLinkLossFwdEnabled is enabled.

CmLinkLossFwdTriggerTypesr/w

Type Values:

1	trig-efm-signal
2	trig-link-down
3	trig-odu-ais
4	trig-odu-lck
5	trig-odu-tim
6	trig-odu-bdi
7	trig-opu-plm
8	trig-opu-csf

.1.3.6.1.4.1.2544.1.12.4.1.1.1.43

cmEthernetAccPortLinkLossFwdDelay

This object allows specification of the delay between
detection of link loss and signalling of link loss forwarding.
Time specified is in seconds.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.1.1.44

cmEthernetAccPortLinkLossFwdActive

This object provides the link loss forwarding status indicating
if link loss forwarding is currently being signaled via
the port.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.45

cmEthernetAccPortLinkLossFwdPartnerEnabled

This object provides the indication of a link partners ability
to support link loss forwarding via EFM, i.e. from
received organization specific OAMPDUs.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.46

cmEthernetAccPortLinkLossFwdLocalLinkId

This object allows configuration of the Local Link Id on
Ethernet access port.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.1.1.47

cmEthernetAccPortLinkLossFwdRemoteLinkIds

This object allows enabling/disabling Remote Link Ids
on Ethernet access port. By setting the appropriate bit
positions, the Ethernet access port is able to distinguish
the remote side client ports from the Remote Link…

CmRemoteLinkIdsr/w

Type Values:

1	remoteLinkId1
2	remoteLinkId2
3	remoteLinkId3
4	remoteLinkId4
5	remoteLinkId5
6	remoteLinkId6
7	remoteLinkId7
8	remoteLinkId8
9	remoteLinkId9
10	remoteLinkId10
11	remoteLinkId11
12	remoteLinkId12
13	remoteLinkId13
14	remoteLinkId14
15	remoteLinkId15
16	remoteLinkId16

.1.3.6.1.4.1.2544.1.12.4.1.1.1.48

cmEthernetAccPortOamId

OAM Id. This is unique EFM OAM sublayer port id.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.1.1.49

cmEthernetAccPortOamAdminDispositiondeprecated

Ethernet Access Port's EFM OAM Disposition.
This object is applicable only for FSP150CM Release 3.1.
This object is deprecated henceforth.
With FSP150CC Release 4.1, this property is managed using
the Control Protoco…

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.1.1.50

cmEthernetAccPortOamDiscoveryState

Ethernet Access Port's OAM discovery state.

CmOamDiscoveryState

Type Values:

0	unknown
1	fault
2	activesendlocal
3	passivewait
4	sendlocalremote
5	sendlocalremoteok
6	sendany

.1.3.6.1.4.1.2544.1.12.4.1.1.1.51

cmEthernetAccPortOamLocalVarRtrvsEnabled

This object allows specification of whether the Ethernet
Access Port supports sending variable response OAMPDUs.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.52

cmEthernetAccPortOamLocalLinkEventsEnabled

This object allows specification of whether the Ethernet
Access Port supports interpreting Link Events.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.53

cmEthernetAccPortOamLocalOamLoopbacksSupported

This object allows specification of whether the Ethernet
Access Port is capable of OAM remote loopback mode.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.54

cmEthernetAccPortOamLocalUnidirSupportEnabled

This object allows specification of whether the Ethernet
Access Port is capable of sending OAMPDUs when the receive path
is non-operational.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.55

cmEthernetAccPortOamLocalMaxPDUSize

This object represents the largest OAMPDU, in octets,
supported by the Ethernet Access Port. This value is
compared to the remote Maximum PDU Size and the smaller of
the two is used.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.1.1.56

cmEthernetAccPortOamLocalMode

This object allows to configure the OAM sublayer entity in
either Active or Passive mode.

CmOamModer/w

Type Values:

0	unknown
1	active
2	passive

.1.3.6.1.4.1.2544.1.12.4.1.1.1.57

cmEthernetAccPortOamRemoteMacAddress

This object allows retrieval of the Remote Mac Address.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.2544.1.12.4.1.1.1.58

cmEthernetAccPortOamRemoteVarRtrvsEnabled

This object allows retrieval of whether the remote OAM
entity supports sending variable response OAMPDUs.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.59

cmEthernetAccPortOamRemoteLinkEventsEnabled

This object allows retrieval of whether the remote OAM
entity supports interpreting Link Events.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.60

cmEthernetAccPortOamRemoteOamLoopbacksSupported

This object allows retrieval of whether the remote OAM
entity supports OAM remote loopback mode.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.61

cmEthernetAccPortOamRemoteUnidirSupportEnabled

This object allows retrieval of whether the remote
OAM entity is capable of sending OAMPDUs when the receive path
is non-operational.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.62

cmEthernetAccPortOamRemoteMaxPDUSize

This object allows retrieval of the remote OAM
entity maximum OAMPDU size.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.1.1.63

cmEthernetAccPortOamRemoteMode

This object allows to retrieve whether the remote OAM
sublayer entity is either in Active or Passive mode.

CmOamMode

Type Values:

0	unknown
1	active
2	passive

.1.3.6.1.4.1.2544.1.12.4.1.1.1.64

cmEthernetAccPortMode

This object allows specification of whether the
Ethernet Access Port is in a connection-oriented
(offering VLAN based services) mode or connection-less
(offering MAC based services) mode.

CmEthernetSvcPortModer/w

Type Values:

1	connection-oriented
2	connection-less

.1.3.6.1.4.1.2544.1.12.4.1.1.1.65

cmEthernetAccPortSvcType

This object allows specification of whether the
Ethernet Access Port provides transparent port based services,
or multi-flow VLAN based services.

CmEthernetSvcTyper/w

Type Values:

1	epl
2	evpl

.1.3.6.1.4.1.2544.1.12.4.1.1.1.66

cmEthernetAccPortRxPauseDispositiondeprecated

This object allows management of RX pause frames on
Ethernet Access port. This object is applicable only
for FSP150CM Release 3.1.
This object is deprecated henceforth. With FSP150CC Release 4.1,
this property is man…

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.1.1.67

cmEthernetAccPortTxPauseEnabled

This object allows enabling/disabling transmit pause frames on
Ethernet Access port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.68

cmEthernetAccPortAfpType

This object allows specification of the Acceptable Frame Policy on
Ethernet Access port. Users can specify whether the port supports
only tagged frames, only untagged frames or both tagged and
untagged frames.

CmAfpTyper/w

Type Values:

1	tagged
2	untagged
3	all

.1.3.6.1.4.1.2544.1.12.4.1.1.1.69

cmEthernetAccPortMDIXStatus

This object provides the current MDIX status of the
Ethernet Access port.

CmEthernetMDIXType

Type Values:

1	not-applicable
2	auto-mdix
3	crossed
4	uncrossed
5	notAvailable

.1.3.6.1.4.1.2544.1.12.4.1.1.1.70

cmEthernetAccPortSfpReach

This object provides the SFP Reach in meters.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.1.1.71

cmEthernetAccPortSfpLaserWaveLength

This object provides the SFP Laser Wave Length in nano meters.
This is applicable only when cmEthernetAccPortMediaType is fiber.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.1.1.72

cmEthernetAccPortSfpMediaType

This object provides the SFP Media Type.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.

CM-COMMON-MIBSfpMediaType

Type Values:

0	not-applicable
1	singlemode
2	multimode
3	multimode62-5
4	copper

.1.3.6.1.4.1.2544.1.12.4.1.1.1.73

cmEthernetAccPortOamEnabled

This object allows to manage the EFM OAM on Ethernet Access Port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.74

cmEthernetAccPortOamAdminState

This object provides the EFM OAM Admin State.

CmOamAdminState

Type Values:

0	not-applicable
1	enabled
2	disabled

.1.3.6.1.4.1.2544.1.12.4.1.1.1.75

cmEthernetAccPortShapingEnabled

This object allows to manage the Access Port Shaping.
When enabled, values in cmEthernetAccPortShapedSpeedLo and
cmEthernetAccPortShapedSpeedHi are applicable.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.76

cmEthernetAccPortShapedSpeedLo

This object allows to specify the lower 32 bits of
the Access Port Shaped speed. This value is applicable
when cmEthernetAccPortShapingEnabled is enabled.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.1.1.77

cmEthernetAccPortShapedSpeedHi

This object allows to specify the higher 32 bits of
the Access Port Shaped speed. This value is applicable
when cmEthernetAccPortShapingEnabled is enabled.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.1.1.78

cmEthernetAccPortQinQEtherType

This object allows to specify the Q-in-Q Ether Type
on the Access Port. Setting this value to 0 will disable
the Q-in-Q override on the Access Port.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.1.1.79

cmEthernetAccPortRxPauseEnabled

This object allows to enable/disable the RX PAUSE
on the Access Port. This object is not applicable for FSP150CM NTU Card.
On NTU Card cmEthernetAccPortRxPauseDisposition object should be used to
provision RxPause disp…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.80

cmEthernetAccPortAutoDiagEnabled

This object allows to enable or disable the automatic
Cable Diagnostic tests when the cable is removed from the port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.81

cmEthernetAccPortLinkLossFwdTxActionType

This object allows to specify the Access Port's behavior when
link loss forwarding trigger events occur on the Network Port.
This provides ability to configure per access port LLF behavior.

CmLinkLossFwdTxActionTyper/w

Type Values:

0	not-applicable
1	llf-tx-no-action
2	llf-tx-efm-signal
3	llf-tx-link-down
4	llf-odu-ais
5	llf-opu-csf
6	llf-otu-ais

.1.3.6.1.4.1.2544.1.12.4.1.1.1.82

cmEthernetAccPortLinkLossFwdRxRLDLinkIds

This object provides the received Remote Link IDs in
EFM RLD messages on the Access Port.

CmRemoteLinkIds

Type Values:

1	remoteLinkId1
2	remoteLinkId2
3	remoteLinkId3
4	remoteLinkId4
5	remoteLinkId5
6	remoteLinkId6
7	remoteLinkId7
8	remoteLinkId8
9	remoteLinkId9
10	remoteLinkId10
11	remoteLinkId11
12	remoteLinkId12
13	remoteLinkId13
14	remoteLinkId14
15	remoteLinkId15
16	remoteLinkId16

.1.3.6.1.4.1.2544.1.12.4.1.1.1.83

cmEthernetAccPortN2AVlanTrunkingEnabled

This object allows to enable or disable the VLAN trunking on
Ethernet Access port. Disabling VLAN trunking removes all
VLAN tags before transmitting traffic out of the access port.
This object is only applicable for co…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.84

cmEthernetAccPortA2NPushPVIDEnabled

This object allows to specify whether cmEthernetAccPortPortVlanId
value will be PUSHed on untagged frames or not in the
Access to Network direction. This object is only applicable
for connection-oriented, evpl servic…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.85

cmEthernetAccPortN2APopPVIDEnabled

This object allows to specify whether cmEthernetAccPortPortVlanId
value will be POPed in the
Network to Access direction. This object is only applicable
for connection-oriented, evpl service type.

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-7

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.86

cmEthernetAccPortPortVlanId

This object allows to specify the Ethernet Access Port VLAN Id
to PUSH on untagged frames in the Access to Network
direction. This object is only applicable for connection-oriented,
evpl service type, when cmEthernetA…

CM-COMMON-MIBVlanIdr/w

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.4.1.1.1.87

cmEthernetAccPortPortVlanPriority

This object allows to specify the Ethernet Access Port VLAN Priority
for the PUSHed VLAN tag (specified by cmEthernetAccPortPortVlanId)
on untagged frames in the Access to Network direction.
This object is only appl…

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.1.1.88

cmEthernetAccPortPrioMapMode

This object allows to specify the Ethernet Access Port
Priority Mapping Mode used for classification of frames.
This object is only applicable for connection-oriented,
evpl service type.

CM-COMMON-MIBPriorityMapModer/w

Type Values:

1	priomap-none
2	priomap-tos
3	priomap-dscp
4	priomap-8021p
5	priomap-8021p-inner

.1.3.6.1.4.1.2544.1.12.4.1.1.1.89

cmEthernetAccPortSyncEEnabled

This object allows to specify whether the Ethernet Access Port
can be enabled/disabled for Synchronous Ethernet. This object
is only applicable for Synchronous Ethernet capable ports.
When enabled, on receive side
-…

SNMPv2-TCTruthValuer/w

Constraints:
range: 1-65535

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.90

cmEthernetAccPortQLModeEnabled

This object allows to specify whether the Ethernet Access Port
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetAccPortQLModeEnabled is set to t…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.91

cmEthernetAccPortExpectedQL

This object allows to specify the expected QL when the
Ethernet Access Port is enabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetAccPortQLModeEnabled is set to t…

F3-SYNC-MIBSSMQualityLevelr/w

Constraints:
range: 0-32

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.1.1.92

cmEthernetAccPortAssumedQL

This object allows to specify the assumed QL on the
Ethernet Access Port. This object is only applicable for
Synchronous Ethernet capable ports.
The Assumed QL is only meaningful if the Network Clock Type
(see fsp150…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.1.1.93

cmEthernetAccPortReceivedQL

This object provides the Received QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable.This object is only applicable for
Synchronous Ethernet capab…

F3-SYNC-MIBSSMQualityLevel

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.1.1.94

cmEthernetAccPortTransmitQL

This object provides the Transmitted QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable. This object is only applicable for
Synchronous Ethernet c…

F3-SYNC-MIBSSMQualityLevel

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.1.1.95

cmEthernetAccPortDeiEnabledeprecated

This is a port level control to reset the DEI
(Drop Eligibility Indicator) bit in the S-Tag,
if the downstream equipment supports S-Tag TPID (EtherType) but
cannot handle DEI bit set. In the receive direction,
it uses…

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-65535

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.96

cmEthernetAccPortPcpDEEncType

This is a port level control that specifies the mode of drop
eligibility encoding in PCP bits of the VLAN tag.

PcpDEEncTyper/w

Type Values:

1	enc-none
2	enc-7p1d
3	enc-6p2d
4	enc-5p3d
5	enc-custom

.1.3.6.1.4.1.2544.1.12.4.1.1.1.97

cmEthernetAccPortPcpDEPairsAction

This object allows the SNMP user to manage the Priority
Code Point (PCP) Drop Eligibility Pairs. When the
cmEthernetAccPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d,
the cmAccPortPcpDEPairTable can be used to specify
…

PcpDEPairsActionr/w

Type Values:

0	none
1	apply-pairs

.1.3.6.1.4.1.2544.1.12.4.1.1.1.98

cmEthernetAccPortSSMRemoteMacAddress

This object allows retrieval of the Remote Mac Address, when
the port is peering using SSM.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.1.1.99

cmEthernetAccPortXgePhyType

This object allows to specify the PHY type of 10G Ethernet Port.
10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY
and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29G…

XgePhyTyper/w

Type Values:

0	not-applicable
1	lan
2	wan
3	otn

.1.3.6.1.4.1.2544.1.12.4.1.1.1.100

cmEthernetAccPortLoopbackSourceMacControlEnabled

This object allows to Enable/Disable the Acc Port Source MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.101

cmEthernetAccPortLoopbackDestMacControlEnabled

This object allows to Enable/Disable the Acc Port Destination MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed.

SNMPv2-TCTruthValuer/w

Constraints:
range: 1-5

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.102

cmEthernetAccPortLoopbackSourceMacAddress

This object allows to set Acc Port Source MAC Address for frame
matching when Acc Port Source MAC Control is enabled.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.1.1.103

cmEthernetAccPortLoopbackDestMacAddress

This object allows to set Acc Port Destination MAC Address for frame
matching when Acc Port Destination MAC Control is enabled.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.1.1.104

cmEthernetAccPortLoopbackBlockingEnabled

This object allows frame blocking when loopback is active.
- True: Blocks frames in the non-loopback direction
that match the PORT or VLAN received in the
non-loopback direction. Discards frames
in the loopbac…

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-256

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.105

cmEthernetAccPortRxDeiAction

This object allows to specify
the Receive DEI Action.

RxDeiActionr/w

Type Values:

1	ignore
2	use

.1.3.6.1.4.1.2544.1.12.4.1.1.1.106

cmEthernetAccPortTxDeiAction

This object allows to specify
the Transmit DEI Action.

TxDeiActionr/w

Type Values:

1	setToZero
2	markColor
3	noChange

.1.3.6.1.4.1.2544.1.12.4.1.1.1.107

cmEthernetAccPortRxDeiOuterTagType

This object allows to specify
the Receive DEI Outer Tag Type.

DeiOuterTagTyper/w

Constraints:
range: 1-400

Type Values:

1	stag
2	ctagOrStag

.1.3.6.1.4.1.2544.1.12.4.1.1.1.108

cmEthernetAccPortTxDeiOuterTagType

This object allows to specify
the Transmit DEI Outer Tag Type.

DeiOuterTagTyper/w

Constraints:
range: 0-256

Type Values:

1	stag
2	ctagOrStag

.1.3.6.1.4.1.2544.1.12.4.1.1.1.109

cmEthernetAccPortLaserWDMChannel

Channel number of WDM tunable XFP setting.

SfpChannelIdentifierr/w

Type Values:

0	not-applicable
1	none
2	frequency-19610
3	frequency-19595
4	frequency-19585
5	frequency-19575
6	frequency-19565
7	frequency-19555
8	frequency-19545
9	frequency-19535
10	frequency-19525
11	frequency-19515
12	frequency-19505
13	frequency-19495
14	frequency-19485
15	frequency-19475
16	frequency-19465
17	frequency-19455
18	frequency-19445
19	frequency-19435
20	frequency-19425
21	frequency-19415
22	frequency-19405
23	frequency-19395
24	frequency-19385
25	frequency-19375
26	frequency-19365
27	frequency-19355
28	frequency-19345
29	frequency-19335
30	frequency-19325
31	frequency-19315
32	frequency-19305
33	frequency-19295
34	frequency-19285
35	frequency-19275
36	frequency-19265
37	frequency-19255
38	frequency-19245
39	frequency-19235
40	frequency-19225
41	frequency-19215
42	frequency-19205
43	frequency-19600
44	frequency-19590
45	frequency-19580
46	frequency-19570
47	frequency-19560
48	frequency-19550
49	frequency-19540
50	frequency-19530
51	frequency-19520
52	frequency-19510
53	frequency-19500
54	frequency-19490
55	frequency-19480
56	frequency-19470
57	frequency-19460
58	frequency-19450
59	frequency-19440
60	frequency-19430
61	frequency-19420
62	frequency-19410
63	frequency-19400
64	frequency-19390
65	frequency-19380
66	frequency-19370
67	frequency-19360
68	frequency-19350
69	frequency-19340
70	frequency-19330
71	frequency-19320
72	frequency-19310
73	frequency-19300
74	frequency-19290
75	frequency-19280
76	frequency-19270
77	frequency-19260
78	frequency-19250
79	frequency-19240
80	frequency-19230
81	frequency-19220
82	frequency-19210
83	frequency-19200
84	frequency-19195
85	frequency-19190
86	frequency-19185
87	frequency-19180
88	frequency-19175
89	frequency-19170
90	frequency-19165
91	frequency-19160
92	frequency-19155
93	frequency-19150
94	frequency-19145
95	frequency-19140
96	frequency-19135
97	frequency-19130
98	frequency-19125

.1.3.6.1.4.1.2544.1.12.4.1.1.1.110

cmEthernetAccPortLaserIsTunable

Channel number of WDM tunable XFP setting.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.111

cmEthernetAccPortLaserFrequency

Channel number of WDM tunable XFP setting.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.1.1.112

cmEthernetAccPortMediaTypeAutoSelected

This object provides the auto selected Ethernet Media of the
Ethernet Access Port.

CM-COMMON-MIBEthernetMediaType

Type Values:

0	not-applicable
1	copper
2	fiber
3	coppersfp
4	auto
5	none

.1.3.6.1.4.1.2544.1.12.4.1.1.1.113

cmEthernetAccPortLowLatencyQueuingEnabled

This object allows to Enable/Disable the Low Latency Queuing on
the Ethernet Access Port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.114

cmEthernetAccPortA2nSwapPriorityVIDEnabled

This object allows to Enable/Disable
the Swapping of Priority Vlan Id in the A2N direction.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.115

cmEthernetAccPortN2aSwapPriorityVIDEnabled

This object allows to Enable/Disable
the Swapping of Priority Vlan Id in the N2A direction.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.1.1.116

cmEthernetAccPortSwapPriorityVID

This object allows to specify the value of
Vlan Id for the Swapping of Priority Vlan Id operation
for both the A2N and N2A direction.

CM-COMMON-MIBVlanIdr/w

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.4.1.1.1.117

cmEthernetAccPortDiagnosticMacAddress

This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.1.1.118

cmEthernetAccPortIngressCOSPrioritydeprecated

Indicates which VLAN tag to use for PCP Priority to COS mapping
when the port Priority Map Mode is 802.1p. Supported values are
inner-vlantag and outer-vlantag. This attribute is only applicable
on products when Flowpo…

CM-COMMON-MIBVlanTagTyper/w

Type Values:

1	inner-vlantag
2	outer-vlantag
3	n2a-priorityMapping
4	mplsLabel
5	vcLabel
6	encapOuterVlanTag

.1.3.6.1.4.1.2544.1.12.4.1.1.1.119

cmEthernetAccPortDefaultCOSdeprecated

The COS assigned to a frame that does not have a valid COS identifier
for the Priority Map Mode of the port. This attribute is only applicable
on products when Flowpoint Model is supported.

This value is …

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.1.1.120

cmEthernetAccPortTrafficModel

The Traffic Management connection model available for the port.
- accessFlow: NID Traffic Connection model.
- flowpoint: Multipoint and Aggregation Traffic Connection model.

EthernetPortTrafficModelr/w

Type Values:

1	accessFlow
2	flowpoint

.1.3.6.1.4.1.2544.1.12.4.1.1.1.121

cmEthernetAccPortCpdTable

table

.1.3.6.1.4.1.2544.1.12.4.1.2 · 1 row entry · 10 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetAccPortCpdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetAccPortCpdTable'

A list of entries corresponding to Ethernet Access Port 
Control Protocol Disposition.  
          
This table is only
applicable for FSP150CM Hub Shelf Release 3.x.

cmEthernetAccPortCpdEntry row .1.3.6.1.4.1.2544.1.12.4.1.2.1

A conceptual row in the cmEthernetAccPortCpdTable.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Access Port.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetAccPortCpdIndex

An arbitrary integer index value used to uniquely identify
this CPD Service Entry.

Integer32

Constraints:
range: 0-512

.1.3.6.1.4.1.2544.1.12.4.1.2.1.1

cmEthernetAccPortCpdFilterType

This enables specification of type of CPD Filter.

CmControlProtocolFilterType

Type Values:

1	efmoam
2	pause

.1.3.6.1.4.1.2544.1.12.4.1.2.1.2

cmEthernetAccPortCpdFilterDescr

This provides description of CPD Filter.

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.2544.1.12.4.1.2.1.3

cmEthernetAccPortCpdDispType

This enables specification of disposion type of CPD Filter.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.2.1.4

cmEthernetAccPortCpdMacAddressMatch

This enables provides the Filter MAC Address to match.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.2.1.5

cmEthernetAccPortCpdMacAddressMask

This enables provides the Filter MAC Address Mask to match.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.2.1.6

cmEthernetAccPortCpdEthertype

This enables provides the Filter Ethertype to match.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.2.1.7

cmEthernetAccPortCpdEthertypeMask

This enables provides the Filter Ethertype Mask to match.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.2.1.8

cmEthernetAccPortCpdSubtype

This enables provides the Filter Subtype to match.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.2.1.9

cmEthernetAccPortCpdSubtypeMask

This enables provides the Filter Subtype Mask to match.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.2.1.10

cmEthernetAccPortClbTable

table

.1.3.6.1.4.1.2544.1.12.4.1.3 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetAccPortClbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetAccPortClbTable'

A list of entries corresponding to Ethernet Access Port 
Cable Length Benchmark.

cmEthernetAccPortClbEntry row .1.3.6.1.4.1.2544.1.12.4.1.3.1

A conceptual row in the cmEthernetAccPortClbTable.
These entries represent Cable Length Benchmarks
on the Ethernet Access Port.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetAccPortClbIndex

An integer index value used to uniquely identify
this Cable Length Benchmark Entry specification.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.3.1.1

cmEthernetAccPortClbEnabled

This enables specification of Cable Length Benchmark entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.3.1.2

cmEthernetAccPortClbLength

Cable length of Cable Points Entry. The cable length is of
the form XXX[.YY] where XX can be any integer value and YY
allows precision of 2 decimals after the floating point. Note
that .YY is optional.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.3.1.3

cmEthernetAccPortClbDescr

A textual string containing description of cable span.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.3.1.4

cmFlowTable

table

.1.3.6.1.4.1.2544.1.12.4.1.4 · 1 row entry · 70 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmFlowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmFlowTable'

A list of entries corresponding to Ethernet Flows 
for configuration purposes.  If the corresponding
Ethernet Access Port's  cmEthernetAccPortMode is 
connection-oriented and cmEthernetAccPortSvcType is epl,
there exists a single Flow in this table.  
          
No Flow creation or deletion is allowed on this table
for FSP150CM NTU based services.
             
Since Fsp150 R5.6CC release this table is used to manage 2 types of Flows:
  - Access Port Flow as in the previous releases
  - Tranparent Flow (new in 5.6CC)
 A Transparent Flow is Flow between Network-1 and Network-2 ports used
 to convey pass-thru traffic in the ring topology e.g. ERP.
 Few of the existing attributes will have new semantix for Transperent Flow.
 Transparent Flow is a NE level object and hence has different indexing 
 than the Access Port Flow. The valid indices are neIndex and cmFlowIndex.
 The remaining indices will have constant values as follows:
     shelfIndex = 1
     slotIndex = 255
     cmEthernetAccPortIndex = 0

cmFlowEntry row .1.3.6.1.4.1.2544.1.12.4.1.4.1

A conceptual row in the cmFlowTable. These entries represent
an Ethernet Flow.

Indexes

No indexes recorded

Column Syntax OID

cmFlowIndex

The integer index value corresponding to an Ethernet Flow.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.4.1.1

cmFlowCircuitName

This object allows SNMP management entities to provide a
circuit identifier with the Flow.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.4.1.2

cmFlowAdminState

This object represents the Administrative State of the Flow.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.4.1.3

cmFlowOperationalState

This object represents the Operational State of the Flow.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.4.1.4

cmFlowSecondaryState

This object represents the Secondary State of the Flow.

CM-COMMON-MIBSecondaryState

Constraints:
range: 1-2147483647

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.4.1.5

cmFlowType

This object represents the type of the Flow.

CmFlowTyper/w

Constraints:
range: 1-100

Type Values:

1	portbased
2	regular
3	default

.1.3.6.1.4.1.2544.1.12.4.1.4.1.6

cmFlowMultiCOS

This object allows specification of multiple COS (Class of Service)
Flow.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.7

cmFlowA2NCIR

This object represents the Commited Information
Rate(CIR) of an Flow in the Access to Network (A2N) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settable. This value represents the lower
32…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.8

cmFlowA2NEIR

This object represents the Excess Information
Rate(EIR) on an Flow in the Access to Network (A2N) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settable. This value represents the lower
32-…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.9

cmFlowN2ARateLimitingEnabled

This object allows management of the N2A rate limiting,
independent of A2N rate limiting. When not enabled,
N2A specification is the same as A2N.

This object is not applicable for Tranparent Flow; the val…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.10

cmFlowN2ACIR

This object represents the Commited Information
Rate(CIR) of an Flow in the Network to Access (N2A) direction.
For a portbased Flow, this object is not settable. This is
only settable if cmFlowN2ARateLimitingEnabled is…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.11

cmFlowN2AEIR

This object represents the Excess Information
Rate(CIR) of an Flow in the Network to Access (N2A) direction.
For a portbased Flow, this object is not settable. This is
only settable if cmFlowN2ARateLimitingEnabled is e…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.12

cmFlowStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …

.1.3.6.1.4.1.2544.1.12.4.1.4.1.13

cmFlowRowStatus

The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.2544.1.12.4.1.4.1.14

cmFlowTrafficType

This object provides information on the type of traffic flow
supported by the system, i.e.'shaped-only' flows (support
only shaping) or 'policed-shaped' (support policing and shaping) flows.
'shaped-only' flow exists…

FlowTrafficType

Type Values:

1	shaped-only
2	policed-shaped
3	policed-only

.1.3.6.1.4.1.2544.1.12.4.1.4.1.15

cmFlowCOS

This object allows specification of the COS (Class of Service)
value for the Traffic Flow. This value is used at flow creation
time to identify the COS level of the A2N and N2A shaper.
In case of a multi-COS flow, this …

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.4.1.16

cmFlowVlanMemberList

This object is applicable only when Port is in connection-oriented
evpl mode. This attribute is mandatory if creation of
connection-oriented evpl regular flow is desired.
It allows specification of VLAN members of the F…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.4.1.17

cmFlowAction

This object is applicable only when Port is in connection-oriented
evpl mode and the cmFlowType is regular. This object allows to
add or remove the VLAN members specified by
cmFlowActionVlan object. SNMP manager must …

FlowVlanActionTyper/w

Constraints:
range: 0-100

Type Values:

1	no-action
2	add-vlan
3	remove-vlan

.1.3.6.1.4.1.2544.1.12.4.1.4.1.18

cmFlowActionVlan

This object is applicable only when Port is in connection-oriented
evpl mode. This object allows adding/removing VLAN members
to a connection-oriented evpl regular flow.
VLAN member is of the form X-Y where X is the
VLA…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.4.1.19

cmFlowUntaggedMemberEnabled

This object is applicable only when Port is in connection-oriented
evpl mode for a regular flow as well as default flow.
This object allows to specify whether or not the flow
supports untagged traffic.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.20

cmFlowA2NCIRHi

This object represents the Commited Information
Rate(CIR) of an Flow in the Access to Network (A2N) direction.
This value represents the upper 32 bits of CIR (lower is
provided in cmFlowA2NCIR). For a Multi COS flow, …

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.21

cmFlowA2NEIRHi

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.22

cmFlowN2ACIRHi

This object represents the Commited Information
Rate(CIR) of an Flow in the Network to Access (N2A) direction.
This value represents the upper 32 bits of CIR (lower is
provided in cmFlowN2ACIR). For a Multi COS flow, …

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.23

cmFlowN2AEIRHi

This object represents the Excess Information
Rate(EIR) on an Flow in the Network to Access (N2A) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settable. This value represents the higher
32…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.24

cmFlowHCOSMgmtEnabled

This object allows management of Hierarchical COS on the Flow.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.25

cmFlowGuaranteedA2NBandwidthLo

This object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
guaranteed bandwidth (lower 32 bits) of a flow.
…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.26

cmFlowGuaranteedA2NBandwidthHi

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.27

cmFlowMaximumA2NBandwidthLo

This object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
maximum bandwidth (lower 32 bits) of a flow. Th…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.28

cmFlowMaximumA2NBandwidthHi

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.29

cmFlowCTagControl

This object allows specification of the tag management
operation on the C-TAG. Supported types are 'push', 'pushvid',
'swapvid' and 'none'. If the type is 'push',
the VLAN Id (cmFlowCTagVlanId) and priority
(cmFlowCT…

FlowTagControlr/w

Type Values:

1	none
2	push
3	swapvid
4	pushvid
5	pop
6	pushisid

.1.3.6.1.4.1.2544.1.12.4.1.4.1.30

cmFlowCTagVlanId

This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of cmFlowCTagControl.
It is applicable for 'push', 'swapvid' and 'pushvid'
control types.

This object is not app…

CM-COMMON-MIBVlanIdr/w

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.4.1.4.1.31

cmFlowCTagVlanPriority

This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of cmFlowCTagControl.
It is applicable for 'push' control type.

This object is not applicable for Tranpare…

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.4.1.32

cmFlowCTagMatchRxPrio

This object is used to specify whether the C-TAG priority
be used or ignored for traffic in the N2A direction.
This is only applicable if cmFlowCTagControl
is 'push'.

This object is not applicable for T…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.33

cmFlowSTagControl

This object allows specification of the tag management
operation on the S-TAG. Supported types are 'push', 'swapvid', and 'none'.
If the type is 'push', the VLAN Id (cmFlowSTagVlanId) and priority
(cmFlowSTagVlanPrior…

FlowTagControlr/w

Type Values:

1	none
2	push
3	swapvid
4	pushvid
5	pop
6	pushisid

.1.3.6.1.4.1.2544.1.12.4.1.4.1.34

cmFlowSTagVlanId

This object allows specification of the VLAN Id to
be pushed, based on the value of cmFlowSTagControl.
It is applicable for 'push' control type.

This object is not applicable for Tranparent Flow; the valu…

CM-COMMON-MIBVlanIdr/w

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.4.1.4.1.35

cmFlowSTagVlanPriority

This object allows specification of the VLAN Priority to
be pushed, based on the value of cmFlowSTagControl.
It is applicable for 'push' control type.

This object is not applicable for Tranparent Flow; th…

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.4.1.36

cmFlowOuterTagPrioEnabled

This object is used to specify whether the flow
participates in outer-tag priority swap. The Priority
Mapping Table cmPrioMapTable allows the A2N outer-tag
priority to be specified based on incoming priority at
Access…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.37

cmFlowN2ACOSPriorityTagType

This object is used to specify whether the flow
uses the inner-tag or the outer-tag in determining the COS (Class of Service) in the
N2A direction. This object is applicable in the case of a Multi COS Flow.
…

CM-COMMON-MIBVlanTagTyper/w

Type Values:

1	inner-vlantag
2	outer-vlantag
3	n2a-priorityMapping
4	mplsLabel
5	vcLabel
6	encapOuterVlanTag

.1.3.6.1.4.1.2544.1.12.4.1.4.1.38

cmFlowESFramesLossThreshold

This object is used to specify the number of frames lost
per flow that starts counting Errored Seconds (ES) on the flow.
This functionality is applicable if the flow is monitored
using the Y.1731 ESA functionality.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.4.1.4.1.39

cmFlowSESFramesLossThresholdRatio

This object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the flow.
This functionality is applicable if the flow is monitored
using the Y.1731 ESA functionalit…

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.4.1.40

cmFlowPolicingEnabled

This object is applicable only when Port is in connection-oriented mode.
This object is applicable to both epl and evpl mode flows.
This object allows to enable/disable the policing function on the flow.

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-32

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.41

cmFlowPreserveSTagProperties

This object is applicable only when Port is in connection-oriented mode.
This object is applicable to evpl mode Regular flows, when S-TAG control
is specified as SWAPVID.
When enabled, this attribute preserves the Ether…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.42

cmFlowInnerTagPrioEnabled

This object is used to specify whether the flow
participates in inner-tag (second) priority swap. The Priority
Mapping Table cmPrioMapTable allows the A2N inner-tag
priority to be specified based on incoming priority …

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.43

cmFlowN2AOuterTagPrioEnabled

This object is used to specify whether the flow
participates in outer-tag priority swap in the A2N direction.
The Priority Mapping Table cmNetPortPrioMapTable allows the N2A outer-tag
priority to be specified based on i…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.44

cmFlowA2NShapingType

This object is used to specify whether the traffic in A2N direction
passing through this flow is shaped by port-level or flow-level Shapers.
In case of portbased flows the value of this attribute is flow-based and
cann…

ShapingTyper/w

Constraints:
range: 0-65535

Type Values:

1	port-based
2	flow-based
3	llq

.1.3.6.1.4.1.2544.1.12.4.1.4.1.45

cmFlowN2AShapingType

This object is used to specify whether the traffic in N2A direction
passing through this flow is shaped by port-level or flow-level Shapers.
In case of portbased flows the value of this attribute is flow-based and
cann…

ShapingTyper/w

Type Values:

1	port-based
2	flow-based
3	llq

.1.3.6.1.4.1.2544.1.12.4.1.4.1.46

cmFlowSTagMatchRxPrio

This object indicates whether the S-TAG priority
is used or ignored for traffic in the N2A direction.
This is only applicable if cmFlowSTagControl
is 'push'.

This object is not applicable for Tranparent…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.47

cmFlowAutoBandwidthConfigEnabled

This object is applicable for Flows on the PWE3 Ethernet Backplane Port.
When set to TRUE bandwidth of this Flow will be automatically adjusted when
PWE3 SATOPs are provisioned. The bandwidth will be adjusted based on t…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.48

cmFlowPort1

This object specifies a physical or logical port on the Access side of the
Flow. This can be Access Port, Access LAG or Access Split Horizion Group.

In case of Tranparent Flow this object specifies port1…

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.49

cmFlowPort2

This object specifies a physical or logical port on the Network side of the
Flow. This can be Network Port, Network LAG, Network Split Horizion Group
ERP or Protection Group.

In case of Tranparent Flow t…

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.50

cmFlowPolicingControl

This object specifies the direction(s) in which Poling is enabled on traffic
within this Flow when cmFlowPolicingEnabled is TRUE.

PolicingControlr/w

Constraints:
range: 1-4

Type Values:

1	a2n
2	n2a
3	a2nN2a
4	n2n

.1.3.6.1.4.1.2544.1.12.4.1.4.1.51

cmFlowAutoCIRPercentage

This object specifies the percentage of available CIR on the Network
ports assigned to this Flow when cmFlowAutoBandwidthConfigEnabled is TRUE.
The flow guaranteedBW is set to available BW multiplied by this value.
T…

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.2544.1.12.4.1.4.1.52

cmFlowLoopAvoidanceObject

This object specifies the Loop Avoidance instance to which this Flow belongs.
This object is appicable only for Transparent Flow and should point to the
ERP instance for which this Flows carries pass-thru traffic.
…

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.53

cmFlowConfigType

This object specifies if this Flow is an Access Flow or Pass-thru Flow.

FlowConfigType

Type Values:

1	access
2	passThru

.1.3.6.1.4.1.2544.1.12.4.1.4.1.54

cmFlowN2NForwardingEnabled

This object is used to specify whether n2n forwarding
is enabled on particular Flow.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.55

cmFlowA2NMulticastRateLimitControl

Whether multicast frames are limited per Flow.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.56

cmFlowA2NMulticastRateLimitLo

The rate limit for multicast packets per Flow.
When cmFlowA2NMulticastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.

This object represents the low-order 32-bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.57

cmFlowA2NMulticastRateLimitHi

The rate limit for multicast packets per Flow.
When cmFlowA2NMulticastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.

This object represents the high-order 32-bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.58

cmFlowA2NBroadcastRateLimitControl

Whether broadcast frames are limited per Flow.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.59

cmFlowA2NBroadcastRateLimitLo

The rate limit for multicast packets per Flow.
When cmFlowA2NBroadcastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.

This object represents the low-order 32-bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.60

cmFlowA2NBroadcastRateLimitHi

The rate limit for multicast packets per Flow.
When cmFlowA2NBroadcastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.

This object represents the high-order 32-bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.61

cmFlowA2NCombinedRateLimitControl

Whether both multicast and broadcast frames are limited per Flow.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.62

cmFlowA2NCombinedRateLimitLo

The rate limit for multicast packets per Flow.
When cmFlowA2NCombinedRateLimiteControl is set and value is 0,
then all multicast frames are dropped.

This object represents the low-order 32-bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.4.1.63

cmFlowA2NCombinedRateLimitHi

The rate limit for multicast packets per Flow.
When cmFlowA2NCombinedRateLimiteControl is set and value is 0,
then all multicast frames are dropped.

This object represents the high-order 32-bits.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.4.1.4.1.64

cmFlowRefPrioMapProfile

This object used to specify the flow's profile.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.65

cmFlowRefEoMplsPwObject

This object specifies EoMpls Pw object OID.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.66

cmFlowRefN2APrioMapProfile

This object used to specify the flow's N2A direction profile.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.67

cmFlowSecureBlockingEnabled

This object can be used to enable/disable secure block.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.4.1.68

cmFlowRefConnectGuardFlowList

This object specifies the secure flow list,
it should be f3ConnectGuardFlowIndex value list split with comma.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.4.1.69

cmFlowSecureStateList

This object specifies the secure state list,
it should be secure state value list and split with comma.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.4.1.70

cmFlowCpdTable

table

.1.3.6.1.4.1.2544.1.12.4.1.5 · 1 row entry · 10 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmFlowCpdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmFlowCpdTable'

A list of entries corresponding to Flow 
Control Protocol Disposition.
This table is only
applicable for FSP150CM Hub Shelf Release 3.x.

cmFlowCpdEntry row .1.3.6.1.4.1.2544.1.12.4.1.5.1

A conceptual row in the cmFlowCpdTable.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Network Port.

Indexes

No indexes recorded

Column Syntax OID

cmFlowCpdIndex

An arbitrary integer index value used to uniquely identify
this CPD Service Entry.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.5.1.1

cmFlowCpdFilterType

This enables specification of type of CPD Filter.

CmControlProtocolFilterType

Type Values:

1	efmoam
2	pause

.1.3.6.1.4.1.2544.1.12.4.1.5.1.2

cmFlowCpdFilterDescr

This provides description of CPD Filter.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.5.1.3

cmFlowCpdDispType

This enables specification of disposion type of CPD Filter.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.5.1.4

cmFlowCpdMacAddressMatch

This enables provides the Filter MAC Address to match.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.5.1.5

cmFlowCpdMacAddressMask

This enables provides the Filter MAC Address Mask to match.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.5.1.6

cmFlowCpdEthertype

This enables provides the Filter Ethertype to match.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.4.1.5.1.7

cmFlowCpdEthertypeMask

This enables provides the Filter Ethertype Mask to match.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.5.1.8

cmFlowCpdSubtype

This enables provides the Filter Subtype to match.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.5.1.9

cmFlowCpdSubtypeMask

This enables provides the Filter Subtype Mask to match.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.5.1.10

cmQosShaperTable

table

.1.3.6.1.4.1.2544.1.12.4.1.6 · 1 row entry · 26 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmQosShaperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmQosShaperTable'

A list of entries corresponding to Ethernet Quality of Service 
Shaper for configuration purposes.

cmQosShaperEntry row .1.3.6.1.4.1.2544.1.12.4.1.6.1

A conceptual row in the cmQosShaperTable.
These entries represent a Quality of Service Shaper.

Indexes

No indexes recorded

Column Syntax OID

cmQosShaperTypeIndex

The unique index value corresponding to a Quality of Service
Shaper's direction.
Values 1 and 2 are applicable to the Access Flow Shaper:
- value of 1 stands for A2N direction,
- value of 2 stands for N2A direction.
Va…

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.6.1.1

cmQosShaperIndex

The unique integer index value corresponding to a
Quality of Service Shaper.

In release 5.6CC the range is extended to 1..16 to support duplicate
A2N shapers on a Flow. The duplicate shapers are created …

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.6.1.2

cmQosShaperDirection

The direction of the Quality of Service Shaper.

CM-COMMON-MIBTrafficDirection

Type Values:

1	a2n
2	n2a
3	ingress
4	egress
5	n2n

.1.3.6.1.4.1.2544.1.12.4.1.6.1.3

cmQosShaperAdminState

This object represents the Administrative State of
the QOS Shaper.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.6.1.4

cmQosShaperOperationalState

This object represents the Operational State of the QOS Shaper.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.6.1.5

cmQosShaperSecondaryState

This object represents the Secondary State of the QOS Shaper.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.6.1.6

cmQosShaperCIR

This object represents the Commited Information
Rate(CIR) (Lower 32 bits)of a Shaper.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2544.1.12.4.1.6.1.7

cmQosShaperCBS

This object represents the Commited Burst Size (CBS) of the Shaper.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2544.1.12.4.1.6.1.8

cmQosShaperEIR

This object represents the Excess Information
Rate(EIR) (Lower 32 bits) of a Shaper.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2544.1.12.4.1.6.1.9

cmQosShaperEBS

This object represents the Excess Burst Size (EBS) of the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.10

cmQosShaperBufferSize

This object represents the Buffer Size of the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.11

cmQosShaperStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.6.1.12

cmQosShaperRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.6.1.13

cmQosShaperCOS

This object provides the COS (Class of Service)
value for the QOS Shaper.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.6.1.14

cmQosShaperCIRHi

This object represents the Commited Information
Rate(CIR) (Higher 32 bits) of a Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.15

cmQosShaperEIRHi

This object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.16

cmQosShaperSoamCIRLo

This object represents the Soam Commited Information
Rate(SOAM-CIR) (Lower 32 bits) of a Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.17

cmQosShaperSoamCIRHi

This object represents the Soam Commited Information
Rate(SOAM-CIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.18

cmQosShaperSoamEIRLo

This object represents the Soam Excess Information
Rate(SOAM-EIR) (Lower 32 bits) of a Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.19

cmQosShaperSoamEIRHi

This object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2544.1.12.4.1.6.1.20

cmQosShaperWredGreenMinQueueThreshold

This object represents the Wred green packet min queue threshold value.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.21

cmQosShaperWredGreenMaxQueueThreshold

This object represents the Wred green packet max queue threshold value.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.22

cmQosShaperWredGreenDropProbability

This object represents the Wred green packet drop probability.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.23

cmQosShaperWredYellowMinQueueThreshold

This object represents the Wred yellow packet min queue threshold value.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.24

cmQosShaperWredYellowMaxQueueThreshold

This object represents the Wred yellow packet max queue threshold value.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 2-300

.1.3.6.1.4.1.2544.1.12.4.1.6.1.25

cmQosShaperWredYellowDropProbability

This object represents the Wred yellow packet drop probability.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.6.1.26

cmEthernetNetPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.7 · 1 row entry · 110 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetNetPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetNetPortTable'

A list of entries corresponding to Ethernet Network Port 
Facilities for configuration purposes.

cmEthernetNetPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.7.1

A conceptual row in the cmEthernetNetPortTable.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetNetPortIndex

An integer index value used to uniquely identify
this Ethernet Network Port within a card.
Note that each Ethernet Network Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, cmEthernetNetPortInd…

Integer32

Constraints:
range: 0-6

.1.3.6.1.4.1.2544.1.12.4.1.7.1.1

cmEthernetNetPortIfIndex

This object has the same value as ifIndex for
Ethernet Network Port. An integer index value used to
uniquely identify this Ethernet Network Port.

IF-MIBInterfaceIndex

Constraints:
range: 0-6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.7.1.2

cmEthernetNetPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Constraints:
range: 0-16

.1.3.6.1.4.1.2544.1.12.4.1.7.1.3

cmEthernetNetPortAdminState

This object represents the Administrative State of the Ethernet
Network Port.

CM-COMMON-MIBAdminStater/w

Constraints:
range: 0-6

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.7.1.4

cmEthernetNetPortOperationalState

This object represents the Operational State of the Ethernet
Network Port.

CM-COMMON-MIBOperationalState

Constraints:
range: 0-6

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.7.1.5

cmEthernetNetPortSecondaryState

This object represents the Secondary State of the Ethernet
Network Port.

CM-COMMON-MIBSecondaryState

Constraints:
range: 0-6

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.7.1.6

cmEthernetNetPortMTU

This object provides the MTU on the Ethernet Network Port.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.7.1.7

cmEthernetNetPortMediaType

This object represents the type of Ethernet Media on the
Ethernet Network Port.

CM-COMMON-MIBEthernetMediaTyper/w

Type Values:

0	not-applicable
1	copper
2	fiber
3	coppersfp
4	auto
5	none

.1.3.6.1.4.1.2544.1.12.4.1.7.1.8

cmEthernetNetPortConfigSpeed

This object allows to configure the speed of the
Ethernet Network Port.

CM-COMMON-MIBEthernetPortSpeedr/w

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.7.1.9

cmEthernetNetPortNegotiatedSpeed

This object provides the negotiated speed of the
Ethernet Network Port.

CM-COMMON-MIBEthernetPortSpeed

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.7.1.10

cmEthernetNetPortMDIXType

This object allows management of MDIX property on
Ethernet Network Port.

CmEthernetMDIXTyper/w

Type Values:

1	not-applicable
2	auto-mdix
3	crossed
4	uncrossed
5	notAvailable

.1.3.6.1.4.1.2544.1.12.4.1.7.1.11

cmEthernetNetPortJumboFramesEnabled

This object allows enabling/disabling jumbo frames support on
the Ethernet Network Port. This object is only applicable for
Ethernet Network Port on R3.1CM NTU Card.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.12

cmEthernetNetPortSfpVendorName

This object provides the vendor name of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.7.1.13

cmEthernetNetPortSfpPartNumber

This object provides the part number of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.7.1.14

cmEthernetNetPortSfpSerialNumber

This object provides the serial number of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.7.1.15

cmEthernetNetPortSfpDateOfManufacture

This object provides the date of manufacture of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.4.1.7.1.16

cmEthernetNetPortSfpConnectorValue

This object provides the SFP connector value.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.

CM-COMMON-MIBSfpConnectorValue

Type Values:

0	not-applicable
1	unknown
2	sc
3	fcs1cu
4	fcs2cu
5	bnc-tnc
6	fccoaxhdr
7	fjack
8	lc
9	mt-rj
10	mu
11	sg
12	optpigtail
13	hssdc
14	cupigtail
15	vendorspecific
16	rj45

.1.3.6.1.4.1.2544.1.12.4.1.7.1.17

cmEthernetNetPortInitiateDiag

This object allows to initiate Etherjack diagnosis on the
Ethernet Network Port.

CmEthernetDiagActionr/w

Type Values:

0	not-applicable
1	autoneg
2	cable
3	loopback
4	efm-oam-lpbk
5	all

.1.3.6.1.4.1.2544.1.12.4.1.7.1.18

cmEthernetNetPortDiagnosePair1Cond

This object provides diagnosis results for the cable Pair 1
on Ethernet Network Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.7.1.19

cmEthernetNetPortDiagnosePair2Cond

This object provides diagnosis results for the cable Pair 2
on Ethernet Network Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.7.1.20

cmEthernetNetPortDiagnosePair3Cond

This object provides diagnosis results for the cable Pair 3
on Ethernet Network Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.7.1.21

cmEthernetNetPortDiagnosePair4Cond

This object provides diagnosis results for the cable Pair 4
on Ethernet Network Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.7.1.22

cmEthernetNetPortDiagnoseAutoNegCond

This object provides auto negotiation results of the diagnosis
test on Ethernet Network Port.

CmDiagAutoNegCondType

Type Values:

0	not-applicable
1	autonegok
2	autonegfailed
3	autonegnotrun

.1.3.6.1.4.1.2544.1.12.4.1.7.1.23

cmEthernetNetPortDiagnoseLpbkCond

This object provides port loopback results of the diagnosis
test on Ethernet Network Port.

CmDiagLpbkCondType

Type Values:

0	not-applicable
1	lpbkok
2	lpbkfailed
3	lpbknotrun

.1.3.6.1.4.1.2544.1.12.4.1.7.1.24

cmEthernetNetPortDiagnoseEfmLpbkCond

This object provides remote EFM loopback results of the diagnosis
test on Ethernet Network Port.

CmDiagEfmOamLpbkCondType

Type Values:

0	not-applicable
1	efmlpbkok
2	efmlpbkfailed
3	efmlpbkfailednendNA
4	efmlpbkfailedfendNA
5	efmlpbknotrun

.1.3.6.1.4.1.2544.1.12.4.1.7.1.25

cmEthernetNetPortDiagnoseResult

This object provides results of the diagnosis
test in string form on Ethernet Network Port.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.7.1.26

cmEthernetNetPortDiagnoseTestStatus

This object provides the current status of the diagnosis
test on Ethernet Access Port.

CmDiagTestStatus

Type Values:

0	not-applicable
1	initial
2	in-progress
3	stopped
4	completed
5	aborted

.1.3.6.1.4.1.2544.1.12.4.1.7.1.27

cmEthernetNetPortDiagnoseTestTime

This object provides the time when diagnosis test was last executed.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.4.1.7.1.28

cmEthernetNetPortLoopbackConfig

This object allows to initiate loopbacks on
on the Ethernet Network Port.

CmLoopbackTyper/w

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.7.1.29

cmEthernetNetPortLoopbackStatus

This object provides status of the current loopback
on the Ethernet Network Port.

CmLoopbackType

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.7.1.30

cmEthernetNetPortLoopbackTime

This object allows to specify time for timed-loopbacks on
on the Ethernet Network Port.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.31

cmEthernetNetPortLoopbackSwapSADA

This object allows to specify whether or not the loopbacked
frame will have the Source Address and Destination Address
swapped.

CmSwapSADATyper/w

Type Values:

0	not-applicable
1	noswapSADA
2	swapSADA
3	swapDAOverrideSA
4	swapSADAMacOnly
5	swapDAOverridesSAMacOnly
6	swapIP
7	swapTCPUDP

.1.3.6.1.4.1.2544.1.12.4.1.7.1.32

cmEthernetNetPortOuterVlanLoopbackMask

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.33

cmEthernetNetPortOuterVlanLoopback1

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.34

cmEthernetNetPortOuterVlanLoopback2

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.35

cmEthernetNetPortOuterVlanLoopback3

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.36

cmEthernetNetPortInnerVlanLoopbackMask

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.37

cmEthernetNetPortInnerVlanLoopback1

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.38

cmEthernetNetPortInnerVlanLoopback2

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.39

cmEthernetNetPortInnerVlanLoopback3

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.40

cmEthernetNetPortLinkLossFwdEnabled

This object allows enabling/disabling link loss forwarding
on the Ethernet Network Port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.41

cmEthernetNetPortLinkLossFwdSignalTypedeprecated

This object allows definition of the link loss forwarding
signalling type. This is applicable only if
cmEthernetNetPortLinkLossFwdEnabled is enabled.
This object is only valid for FSP150CM Release 3.1.
This object is…

CmLinkLossFwdSignalTyper/w

Type Values:

0	not-applicable
1	llf-efm-signal
2	llf-link-down
3	llf-odu-ais
4	llf-odu-lck
5	llf-odu-tim
6	llf-odu-bdi
7	llf-opu-plm
8	llf-opu-csf
9	llf-eth-epc

.1.3.6.1.4.1.2544.1.12.4.1.7.1.42

cmEthernetNetPortLinkLossFwdTriggerTypes

This object allows definition of the link loss forwarding
trigger types. This is applicable only if
cmEthernetAccPortLinkLossFwdEnabled is enabled.

CmLinkLossFwdTriggerTypesr/w

Type Values:

1	trig-efm-signal
2	trig-link-down
3	trig-odu-ais
4	trig-odu-lck
5	trig-odu-tim
6	trig-odu-bdi
7	trig-opu-plm
8	trig-opu-csf

.1.3.6.1.4.1.2544.1.12.4.1.7.1.43

cmEthernetNetPortLinkLossFwdDelay

This object allows specification of the delay between
detection of link loss and signalling of link loss forwarding.
Time specified is in seconds.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.7.1.44

cmEthernetNetPortLinkLossFwdActive

This object provides the link loss forwarding status indicating
if link loss forwarding is currently being signaled via
the port.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.45

cmEthernetNetPortLinkLossFwdPartnerEnabled

This object provides the indication of a link partners ability
to support link loss forwarding via EFM, i.e. from
received organization specific OAMPDUs.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.46

cmEthernetNetPortLinkLossFwdLocalLinkId

This object allows configuration of the Local Link Id on
Ethernet Network port.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.7.1.47

cmEthernetNetPortLinkLossFwdRemoteLinkIds

This object allows enabling/disabling Remote Link Ids
on Ethernet Network port. By setting the appropriate bit
positions, the Ethernet Network port is able to distinguish
the remote side client ports from the Remote Li…

CmRemoteLinkIdsr/w

Type Values:

1	remoteLinkId1
2	remoteLinkId2
3	remoteLinkId3
4	remoteLinkId4
5	remoteLinkId5
6	remoteLinkId6
7	remoteLinkId7
8	remoteLinkId8
9	remoteLinkId9
10	remoteLinkId10
11	remoteLinkId11
12	remoteLinkId12
13	remoteLinkId13
14	remoteLinkId14
15	remoteLinkId15
16	remoteLinkId16

.1.3.6.1.4.1.2544.1.12.4.1.7.1.48

cmEthernetNetPortOamId

OAM Id. This is unique EFM OAM sublayer port id.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.7.1.49

cmEthernetNetPortOamAdminDispositiondeprecated

Ethernet Network Port's EFM OAM Administrative Disposition.
This object is applicable only for FSP150CM Release 3.1.
This object is deprecated henceforth.
With FSP150CC Release 4.1, this property is managed using
th…

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.7.1.50

cmEthernetNetPortOamDiscoveryState

Ethernet Network Port's OAM discovery state.

CmOamDiscoveryState

Type Values:

0	unknown
1	fault
2	activesendlocal
3	passivewait
4	sendlocalremote
5	sendlocalremoteok
6	sendany

.1.3.6.1.4.1.2544.1.12.4.1.7.1.51

cmEthernetNetPortOamLocalVarRtrvsEnabled

This object allows specification of whether the Ethernet
Network Port supports sending variable response OAMPDUs.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.52

cmEthernetNetPortOamLocalLinkEventsEnabled

This object allows specification of whether the Ethernet
Network Port supports interpreting Link Events.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.53

cmEthernetNetPortOamLocalOamLoopbacksSupported

This object allows specification of whether the Ethernet
Network Port is capable of OAM remote loopback mode.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.54

cmEthernetNetPortOamLocalUnidirSupportEnabled

This object allows specification of whether the Ethernet
Network Port is capable of sending OAMPDUs when the receive path
is non-operational.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.55

cmEthernetNetPortOamLocalMaxPDUSize

This object represents the largest OAMPDU, in octets,
supported by the Ethernet Network Port. This value is
compared to the remote Maximum PDU Size and the smaller of
the two is used.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.7.1.56

cmEthernetNetPortOamLocalMode

This object allows to configure the OAM sublayer entity in
either Active or Passive mode.

CmOamModer/w

Type Values:

0	unknown
1	active
2	passive

.1.3.6.1.4.1.2544.1.12.4.1.7.1.57

cmEthernetNetPortOamRemoteMacAddress

This object allows retrieval of the Remote Mac Address.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.7.1.58

cmEthernetNetPortOamRemoteVarRtrvsEnabled

This object allows retrieval of whether the remote OAM
entity supports sending variable response OAMPDUs.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.59

cmEthernetNetPortOamRemoteLinkEventsEnabled

This object allows retrieval of whether the remote OAM
entity supports interpreting Link Events.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.60

cmEthernetNetPortOamRemoteOamLoopbacksSupported

This object allows retrieval of whether the remote OAM
entity supports OAM remote loopback mode.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.61

cmEthernetNetPortOamRemoteUnidirSupportEnabled

This object allows retrieval of whether the remote
OAM entity is capable of sending OAMPDUs when the receive path
is non-operational.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.62

cmEthernetNetPortOamRemoteMaxPDUSize

This object allows retrieval of the remote OAM
entity maximum OAMPDU size.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.7.1.63

cmEthernetNetPortOamRemoteMode

This object allows to retrieve whether the remote OAM
sublayer entity is either in Active or Passive mode.

CmOamMode

Type Values:

0	unknown
1	active
2	passive

.1.3.6.1.4.1.2544.1.12.4.1.7.1.64

cmEthernetNetPortRxPauseDisposition

This object allows enabling/disabling receive pause frames on
Ethernet Network port. This object is not applicable
for FSP150CC Release 4.1 products.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.7.1.65

cmEthernetNetPortTxPauseEnabled

This object allows enabling/disabling transmit pause frames on
Ethernet Network port.
This object is not applicable for FSP150CC Release 4.1 products.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.66

cmEthernetNetPortAfpType

This object allows specification of the Acceptable Frame Policy on
Ethernet Network port. Users can specify whether the port supports
only tagged frames, only untagged frames or both tagged and
untagged frames.
This ob…

CmAfpTyper/w

Type Values:

1	tagged
2	untagged
3	all

.1.3.6.1.4.1.2544.1.12.4.1.7.1.67

cmEthernetNetPortMDIXStatus

This object provides the current MDIX status of the
Ethernet Network port.

CmEthernetMDIXType

Type Values:

1	not-applicable
2	auto-mdix
3	crossed
4	uncrossed
5	notAvailable

.1.3.6.1.4.1.2544.1.12.4.1.7.1.68

cmEthernetNetPortSfpReach

This object provides the SFP Reach in meters.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.7.1.69

cmEthernetNetPortSfpLaserWaveLength

This object provides the SFP Laser Wave Length in nano meters.
This is applicable only when cmEthernetNetPortMediaType is fiber.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.7.1.70

cmEthernetNetPortSfpMediaType

This object provides the SFP Media Type.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.

CM-COMMON-MIBSfpMediaType

Type Values:

0	not-applicable
1	singlemode
2	multimode
3	multimode62-5
4	copper

.1.3.6.1.4.1.2544.1.12.4.1.7.1.71

cmEthernetNetPortOamEnabled

This object allows to manage the EFM OAM on Ethernet Network Port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.72

cmEthernetNetPortOamAdminState

This object provides the EFM OAM Admin State.

CmOamAdminState

Type Values:

0	not-applicable
1	enabled
2	disabled

.1.3.6.1.4.1.2544.1.12.4.1.7.1.73

cmEthernetNetPortShapingEnabled

This object allows to manage the Network Port Shaping.
When enabled, values in cmEthernetNetPortShapedSpeedLo and
cmEthernetNetPortShapedSpeedHi are applicable.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.74

cmEthernetNetPortShapedSpeedLo

This object allows to specify the lower 32 bits of
the Network Port Shaped speed. This value is applicable
when cmEthernetNetPortShapingEnabled is enabled.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.4.1.7.1.75

cmEthernetNetPortShapedSpeedHi

This object allows to specify the higher 32 bits of
the Network Port Shaped speed. This value is applicable
when cmEthernetNetPortShapingEnabled is enabled.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.7.1.76

cmEthernetNetPortQinQEtherType

This object allows to specify the Q-in-Q Ether Type
on the Network Port. Setting this value to 0 will disable
the Q-in-Q override on the Network Port.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.7.1.77

cmEthernetNetPortLinkLossFwdTxActionType

This object allows to specify the Network Port's behavior when
link loss forwarding trigger events occur on the Access Port.

CmLinkLossFwdTxActionTyper/w

Type Values:

0	not-applicable
1	llf-tx-no-action
2	llf-tx-efm-signal
3	llf-tx-link-down
4	llf-odu-ais
5	llf-opu-csf
6	llf-otu-ais

.1.3.6.1.4.1.2544.1.12.4.1.7.1.78

cmEthernetNetPortLinkLossFwdRxRLDLinkIds

This object provides the received Remote Link IDs in
EFM RLD messages on the Network Port.

CmRemoteLinkIds

Constraints:
range: 1-65535

Type Values:

1	remoteLinkId1
2	remoteLinkId2
3	remoteLinkId3
4	remoteLinkId4
5	remoteLinkId5
6	remoteLinkId6
7	remoteLinkId7
8	remoteLinkId8
9	remoteLinkId9
10	remoteLinkId10
11	remoteLinkId11
12	remoteLinkId12
13	remoteLinkId13
14	remoteLinkId14
15	remoteLinkId15
16	remoteLinkId16

.1.3.6.1.4.1.2544.1.12.4.1.7.1.79

cmEthernetNetPortAutoDiagEnabled

This object allows to enable or disable the automatic
Cable Diagnostic tests when the cable is removed from the port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.80

cmEthernetNetPortSyncEEnabled

This object allows to specify whether the Ethernet Network Port
can be enabled/disabled for Synchronous Ethernet. This object
is only applicable for Synchronous Ethernet capable ports.
When enabled, on receive side
…

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-32

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.81

cmEthernetNetPortQLModeEnabled

This object allows to specify whether the Ethernet Network Port
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetNetPortQLModeEnabled is set to …

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.82

cmEthernetNetPortExpectedQL

This object allows to specify the expected QL when the
Ethernet Network Port is enabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetNetPortQLModeEnabled is set to …

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.7.1.83

cmEthernetNetPortAssumedQL

This object allows to specify the assumed QL on the
Ethernet Network Port. This object is only applicable for
Synchronous Ethernet capable ports.
The Assumed QL is only meaningful if the Network Clock Type
(see fsp15…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.7.1.84

cmEthernetNetPortReceivedQL

F3-SYNC-MIBSSMQualityLevel

Constraints:
range: 0-65535

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.7.1.85

cmEthernetNetPortTransmitQL

F3-SYNC-MIBSSMQualityLevel

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.7.1.86

cmEthernetNetPortPrioMapMode

This object provides the Priority Mapping Mode used for
classification of frames.

CM-COMMON-MIBPriorityMapMode

Type Values:

1	priomap-none
2	priomap-tos
3	priomap-dscp
4	priomap-8021p
5	priomap-8021p-inner

.1.3.6.1.4.1.2544.1.12.4.1.7.1.87

cmEthernetNetPortDeiEnabledeprecated

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.88

cmEthernetNetPortPcpDEEncType

This is a port level control that specifies the mode of drop
eligibility encoding in PCP bits of the VLAN tag.

PcpDEEncTyper/w

Type Values:

1	enc-none
2	enc-7p1d
3	enc-6p2d
4	enc-5p3d
5	enc-custom

.1.3.6.1.4.1.2544.1.12.4.1.7.1.89

cmEthernetNetPortPcpDEPairsAction

This object allows the SNMP user to manage the Priority
Code Point (PCP) Drop Eligibility Pairs. When the
cmEthernetNetPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d,
the cmNetPortPcpDEPairTable can be used to specify
…

PcpDEPairsActionr/w

Type Values:

0	none
1	apply-pairs

.1.3.6.1.4.1.2544.1.12.4.1.7.1.90

cmEthernetNetPortSSMRemoteMacAddress

This object allows retrieval of the Remote Mac Address, when
the port is peering using SSM.

SNMPv2-TCMacAddress

Constraints:
range: 1-65535

Description:

.1.3.6.1.4.1.2544.1.12.4.1.7.1.91

cmEthernetNetPortXgePhyType

XgePhyTyper/w

Type Values:

0	not-applicable
1	lan
2	wan
3	otn

.1.3.6.1.4.1.2544.1.12.4.1.7.1.92

cmEthernetNetPortLoopbackSourceMacControlEnabled

This object allows to Enable/Disable the Net Port Source MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.93

cmEthernetNetPortLoopbackDestMacControlEnabled

This object allows to Enable/Disable the Net Port Destination MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.94

cmEthernetNetPortLoopbackSourceMacAddress

This object allows to set Net Port Source MAC Address for frame
matching when Net Port Source MAC Control is enabled.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.7.1.95

cmEthernetNetPortLoopbackDestMacAddress

This object allows to set Net Port Destination MAC Address for frame
matching when Net Port Destination MAC Control is enabled.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.7.1.96

cmEthernetNetPortLoopbackBlockingEnabled

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.97

cmEthernetNetPortRxDeiAction

This object allows to specify
the Receive DEI Action.

RxDeiActionr/w

Type Values:

1	ignore
2	use

.1.3.6.1.4.1.2544.1.12.4.1.7.1.98

cmEthernetNetPortTxDeiAction

This object allows to specify
the Transmit DEI Action.

TxDeiActionr/w

Type Values:

1	setToZero
2	markColor
3	noChange

.1.3.6.1.4.1.2544.1.12.4.1.7.1.99

cmEthernetNetPortRxDeiOuterTagType

This object allows to specify
the Receive DEI Outer Tag Type.

DeiOuterTagTyper/w

Type Values:

1	stag
2	ctagOrStag

.1.3.6.1.4.1.2544.1.12.4.1.7.1.100

cmEthernetNetPortTxDeiOuterTagType

This object allows to specify
the Transmit DEI Outer Tag Type.

DeiOuterTagTyper/w

Type Values:

1	stag
2	ctagOrStag

.1.3.6.1.4.1.2544.1.12.4.1.7.1.101

cmEthernetNetPortLaserWDMChannel

Channel number of WDM tunable XFP setting.

SfpChannelIdentifierr/w

Type Values:

0	not-applicable
1	none
2	frequency-19610
3	frequency-19595
4	frequency-19585
5	frequency-19575
6	frequency-19565
7	frequency-19555
8	frequency-19545
9	frequency-19535
10	frequency-19525
11	frequency-19515
12	frequency-19505
13	frequency-19495
14	frequency-19485
15	frequency-19475
16	frequency-19465
17	frequency-19455
18	frequency-19445
19	frequency-19435
20	frequency-19425
21	frequency-19415
22	frequency-19405
23	frequency-19395
24	frequency-19385
25	frequency-19375
26	frequency-19365
27	frequency-19355
28	frequency-19345
29	frequency-19335
30	frequency-19325
31	frequency-19315
32	frequency-19305
33	frequency-19295
34	frequency-19285
35	frequency-19275
36	frequency-19265
37	frequency-19255
38	frequency-19245
39	frequency-19235
40	frequency-19225
41	frequency-19215
42	frequency-19205
43	frequency-19600
44	frequency-19590
45	frequency-19580
46	frequency-19570
47	frequency-19560
48	frequency-19550
49	frequency-19540
50	frequency-19530
51	frequency-19520
52	frequency-19510
53	frequency-19500
54	frequency-19490
55	frequency-19480
56	frequency-19470
57	frequency-19460
58	frequency-19450
59	frequency-19440
60	frequency-19430
61	frequency-19420
62	frequency-19410
63	frequency-19400
64	frequency-19390
65	frequency-19380
66	frequency-19370
67	frequency-19360
68	frequency-19350
69	frequency-19340
70	frequency-19330
71	frequency-19320
72	frequency-19310
73	frequency-19300
74	frequency-19290
75	frequency-19280
76	frequency-19270
77	frequency-19260
78	frequency-19250
79	frequency-19240
80	frequency-19230
81	frequency-19220
82	frequency-19210
83	frequency-19200
84	frequency-19195
85	frequency-19190
86	frequency-19185
87	frequency-19180
88	frequency-19175
89	frequency-19170
90	frequency-19165
91	frequency-19160
92	frequency-19155
93	frequency-19150
94	frequency-19145
95	frequency-19140
96	frequency-19135
97	frequency-19130
98	frequency-19125

.1.3.6.1.4.1.2544.1.12.4.1.7.1.102

cmEthernetNetPortLaserIsTunable

Channel number of WDM tunable XFP setting.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.103

cmEthernetNetPortLaserFrequency

Channel number of WDM tunable XFP setting.

SNMPv2-SMIUnsigned32

Constraints:
range: 1-64

.1.3.6.1.4.1.2544.1.12.4.1.7.1.104

cmEthernetNetPortMediaTypeAutoSelected

This object provides the auto selected Ethernet Media of the
Ethernet Network Port.

CM-COMMON-MIBEthernetMediaType

Constraints:
range: 0-63

Type Values:

0	not-applicable
1	copper
2	fiber
3	coppersfp
4	auto
5	none

.1.3.6.1.4.1.2544.1.12.4.1.7.1.105

cmEthernetNetPortLowLatencyQueuingEnabled

This object allows to Enable/Disable the Low Latency Queuing on
the Ethernet Network Port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.7.1.106

cmEthernetNetPortDiagnosticMacAddress

This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.7.1.107

cmEthernetNetPortIngressCOSPrioritydeprecated

Indicates the VLAN tag to use for PCP Priority to COS mapping
when the port Priority Map Mode is 802.1p. Supported values are
inner-vlantag and outer-vlantag. This attribute is only applicable
on products when Flowpoint…

CM-COMMON-MIBVlanTagTyper/w

Constraints:
range: 0-7

Type Values:

1	inner-vlantag
2	outer-vlantag
3	n2a-priorityMapping
4	mplsLabel
5	vcLabel
6	encapOuterVlanTag

.1.3.6.1.4.1.2544.1.12.4.1.7.1.108

cmEthernetNetPortDefaultCOSdeprecated

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.7.1.109

cmEthernetNetPortTrafficModel

The Traffic Management connection model available for the port.
- accessFlow: NID Traffic Connection model.
- flowpoint: Multipoint and Aggregation Traffic Connection model.

EthernetPortTrafficModelr/w

Type Values:

1	accessFlow
2	flowpoint

.1.3.6.1.4.1.2544.1.12.4.1.7.1.110

cmEthernetNetPortCpdTable

table

.1.3.6.1.4.1.2544.1.12.4.1.8 · 1 row entry · 10 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetNetPortCpdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetNetPortCpdTable'

A list of entries corresponding to Ethernet Network Port 
Control Protocol Disposition.
This table is only
applicable for FSP150CM Hub Shelf Release 3.x.

cmEthernetNetPortCpdEntry row .1.3.6.1.4.1.2544.1.12.4.1.8.1

A conceptual row in the cmEthernetNetPortCpdTable.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Network Port.

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex cmEthernetAccPortIndex cmFlowIndex cmQosFlowPolicerTypeIndex cmQosFlowPolicerIndex

Column Syntax OID

cmEthernetNetPortCpdIndex

An arbitrary integer index value used to uniquely identify
this CPD Service Entry.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2544.1.12.4.1.8.1.1

cmEthernetNetPortCpdFilterType

This enables specification of type of CPD Filter.

CmControlProtocolFilterType

Constraints:
range: 1-16

Type Values:

1	efmoam
2	pause

.1.3.6.1.4.1.2544.1.12.4.1.8.1.2

cmEthernetNetPortCpdFilterDescr

This provides description of CPD Filter.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.8.1.3

cmEthernetNetPortCpdDispType

This enables specification of disposion type of CPD Filter.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.8.1.4

cmEthernetNetPortCpdMacAddressMatch

This enables provides the Filter MAC Address to match.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.8.1.5

cmEthernetNetPortCpdMacAddressMask

This enables provides the Filter MAC Address Mask to match.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.8.1.6

cmEthernetNetPortCpdEthertype

This enables provides the Filter Ethertype to match.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.8.1.7

cmEthernetNetPortCpdEthertypeMask

This enables provides the Filter Ethertype Mask to match.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.8.1.8

cmEthernetNetPortCpdSubtype

This enables provides the Filter Subtype to match.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.8.1.9

cmEthernetNetPortCpdSubtypeMask

This enables provides the Filter Subtype Mask to match.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.8.1.10

cmEthernetMgmtPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.9 · 1 row entry · 11 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetMgmtPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetMgmtPortTable'

A list of entries corresponding to Ethernet Management Port 
Facilities for configuration purposes.

cmEthernetMgmtPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.9.1

A conceptual row in the cmEthernetMgmtPortTable.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetMgmtPortIndex

An integer index value used to uniquely identify
this Ethernet Management Port within a card.
Note that each Ethernet Management Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, cmEthernetMgmt…

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.9.1.1

cmEthernetMgmtPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.9.1.2

cmEthernetMgmtPortAdminState

This object represents the Administrative State of the Ethernet
Management Port.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.9.1.3

cmEthernetMgmtPortOperationalState

This object represents the Operational State of the Ethernet
Management Port.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.9.1.4

cmEthernetMgmtPortSecondaryState

This object represents the Secondary State of the Ethernet
Management Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.9.1.5

cmEthernetMgmtPortMTU

This object provides the MTU on the Ethernet Management Port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.9.1.6

cmEthernetMgmtPortConfigSpeed

This object allows to configure the speed of the
Ethernet Management Port.

CM-COMMON-MIBEthernetPortSpeedr/w

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.9.1.7

cmEthernetMgmtPortNegotiatedSpeed

This object provides the negotiated speed of the
Ethernet Management Port.

CM-COMMON-MIBEthernetPortSpeed

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.9.1.8

cmEthernetMgmtPortMDIXType

This object allows management of MDIX property on
Ethernet Management Port.

CmEthernetMDIXTyper/w

Type Values:

1	not-applicable
2	auto-mdix
3	crossed
4	uncrossed
5	notAvailable

.1.3.6.1.4.1.2544.1.12.4.1.9.1.9

cmEthernetMgmtPortMDIXStatus

This object provides the current MDIX status of the
Ethernet Management port.

CmEthernetMDIXType

Constraints:
range: 1-8

Type Values:

1	not-applicable
2	auto-mdix
3	crossed
4	uncrossed
5	notAvailable

.1.3.6.1.4.1.2544.1.12.4.1.9.1.10

cmEthernetMgmtPortMediaType

This object represents the type of Ethernet Media on the
Ethernet Management Port.

CM-COMMON-MIBEthernetMediaType

Type Values:

0	not-applicable
1	copper
2	fiber
3	coppersfp
4	auto
5	none

.1.3.6.1.4.1.2544.1.12.4.1.9.1.11

cmPrioMapTable

table

.1.3.6.1.4.1.2544.1.12.4.1.10 · 1 row entry · 7 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmPrioMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmPrioMapTable'

A list of entries corresponding to Ethernet Priority Mappings
in multi Class of Service (COS) mode. This table is applicable
only when the Access Port is in connection-oriented evpl mode.

cmPrioMapEntry row .1.3.6.1.4.1.2544.1.12.4.1.10.1

A conceptual row in the cmPrioMapTable.

Indexes

No indexes recorded

Column Syntax OID

cmPrioMapIndex

The integer index value corresponding to a priority value
based on the cmEthernetAccPortPrioMapMode.
In case of TOS and 8021P, valid indices are 1 to 8,
in case of DSCP, valid indices are 1 to 64.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.10.1.1

cmPrioMapInPriority

The integer index value corresponding to a priority value
based on the cmEthernetAccPortPrioMapMode.
In case of TOS and 8021P, valid indices are 0 to 7,
in case of DSCP, valid indices are 0 to 63.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.10.1.2

cmPrioMapXTagControl

This allows specification of whether the priority of
incoming X-TAG should be swapped with cmPrioMapXTagPriority.

PrioMapControlTyper/w

Type Values:

1	none
2	swap

.1.3.6.1.4.1.2544.1.12.4.1.10.1.3

cmPrioMapXTagPriority

This allows specification of the VLAN priority that
will replace the incoming X-TAG's priority. This is
applicable with cmPrioMapXTagControl as 'swap'.

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.10.1.4

cmPrioMapCOS

This allows specification of the COS Priority, i.e.
this helps in determining the appropriate COS Policer for
the Flow.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.10.1.5

cmPrioMapOuterTagPriority

This allows specification of the VLAN priority that
will replace the outgoing (A2N direction) outer-tag's priority.
Note that, each flow participates or not in outer-tag
priority mapping, using the object 'cmFlowOute…

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.10.1.6

cmPrioMapInnerTagPriority

This allows specification of the VLAN priority that
will replace the outgoing (A2N direction) inner-tag's (i.e. second tag)
priority. Note that, each flow participates or not in inner-tag
priority mapping, using the …

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.10.1.7

cmQosFlowPolicerTable

table

.1.3.6.1.4.1.2544.1.12.4.1.11 · 1 row entry · 19 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmQosFlowPolicerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmQosFlowPolicerTable'

A list of entries corresponding to Ethernet Quality of Service 
Policer for configuration purposes.

cmQosFlowPolicerEntry row .1.3.6.1.4.1.2544.1.12.4.1.11.1

A conceptual row in the cmQosFlowPolicerTable.
These entries represent a Quality of Service Policer.

Indexes

No indexes recorded

Column Syntax OID

cmQosFlowPolicerTypeIndex

The unique index value corresponding to a Quality of Service
Policer's direction.
Values 1 and 2 are applicable to the Access Flow Policer
- value of 1 stands for A2N direction,
- value of 2 stands for N2A direction.…

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.11.1.1

cmQosFlowPolicerIndex

The Policer Index that represents the COS level. This
is applicable in case of a Multi COS flow. Index 1
represents COS 0; Index 2 represents COS 1 and so on.

In release 5.6CC the range is extended to 1…

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.11.1.2

cmQosFlowPolicerDirection

This object is allows specification of Policer direction as
'a2n' or 'n2a'.

CM-COMMON-MIBTrafficDirectionr/w

Type Values:

1	a2n
2	n2a
3	ingress
4	egress
5	n2n

.1.3.6.1.4.1.2544.1.12.4.1.11.1.3

cmQosFlowPolicerAdminState

This object represents the Administrative State of
the QOS Flow Policer.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.11.1.4

cmQosFlowPolicerOperationalState

This object represents the Operational State of the QOS Flow Policer.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.11.1.5

cmQosFlowPolicerSecondaryState

This object represents the Secondary State of the QOS Flow Policer.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.11.1.6

cmQosFlowPolicerCIRLo

This object allows specification of the Commited Information
Rate(CIR) on Policer. This represents the lower 32 bits of the
CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.11.1.7

cmQosFlowPolicerCIRHi

This object allows specification of the Commited Information
Rate(CIR) on Policer. This represents the upper 32 bits of the
CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.11.1.8

cmQosFlowPolicerEIRLo

This object allows specification of the Excess Information
Rate(EIR) on the Policer. This represents the lower 32 bits
of the EIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.11.1.9

cmQosFlowPolicerEIRHi

This object allows specification of the Excess Information
Rate(EIR) on the Policer. This represents the upper 32 bits
of the EIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.11.1.10

cmQosFlowPolicerCBS

This object allows specification of the Commited Burst Size
(CBS) on Policer.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.11.1.11

cmQosFlowPolicerEBS

This object allows specification of the Excess Burst Size
(EBS) on the Policer.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.11.1.12

cmQosFlowPolicerAlgorithm

This object allows specification of Policer algorithm as
'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate
Triple Color Marking).

PolicerAlgorithmType

Type Values:

1	srTCM
2	trTCM

.1.3.6.1.4.1.2544.1.12.4.1.11.1.13

cmQosFlowPolicerColorMode

This object allows specification of Policer Color Mode as
'color-aware' or 'color-blind'.

PolicerColorModer/w

Type Values:

1	color-aware
2	color-blind

.1.3.6.1.4.1.2544.1.12.4.1.11.1.14

cmQosFlowPolicerColorMarkingFlagdeprecated

This object allows specification of Policer Color Marking Flag.
The policer will set/clear the DEI (Drop Eligibility Indication)
bit of the frame on an S-TAG if this flag is enabled.
This object is not supported - sett…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.11.1.15

cmQosFlowPolicerCouplingFlag

This object allows specification of Policer Coupling Flag.
When coupling is enabled, tokens that would normally be
added to the C-bucket are passed to the E-bucket only once the CIR
bucket has reached its CBS level. Th…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.11.1.16

cmQosFlowPolicerAssociatedShaper

This object allows specification of the QOS Shaper
associated with this Policer. Multiple Policers can map
to single Shaper. The corresponding row with the
specified QOS value must exist in
cmQosShaperTable when this …

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.11.1.17

cmQosFlowPolicerStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.11.1.18

cmQosFlowPolicerRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.11.1.19

cmAccPortQosShaperTable

table

.1.3.6.1.4.1.2544.1.12.4.1.12 · 1 row entry · 23 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmAccPortQosShaperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmAccPortQosShaperTable'

A list of entries corresponding to Ethernet Access Port 
Quality of Service Shaper for configuration purposes.
These shapers can be managed when the Access Port is
in evpl mode and are relevant for traffic in the
network to access direction.

cmAccPortQosShaperEntry row .1.3.6.1.4.1.2544.1.12.4.1.12.1

A conceptual row in the cmAccPortQosShaperTable.
These entries represent a Quality of Service Shaper.

Indexes

No indexes recorded

Column Syntax OID

cmAccPortQosShaperIndex

The unique integer index value corresponding to a
Quality of Service Shaper.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.12.1.1

cmAccPortQosShaperDirection

The direction of the Quality of Service Shaper.

CM-COMMON-MIBTrafficDirection

Type Values:

1	a2n
2	n2a
3	ingress
4	egress
5	n2n

.1.3.6.1.4.1.2544.1.12.4.1.12.1.2

cmAccPortQosShaperAdminState

This object represents the Administrative State of
the QOS Shaper.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.12.1.3

cmAccPortQosShaperOperationalState

This object represents the Operational State of the QOS Shaper.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.12.1.4

cmAccPortQosShaperSecondaryState

This object represents the Secondary State of the QOS Shaper.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.12.1.5

cmAccPortQosShaperCIRLo

This object represents the Commited Information
Rate(CIR) (Lower 32 bits)of a Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.6

cmAccPortQosShaperCIRHi

This object represents the Commited Information
Rate(CIR) (Higher 32 bits) of a Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.7

cmAccPortQosShaperEIRLo

This object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.8

cmAccPortQosShaperEIRHi

This object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.9

cmAccPortQosShaperCBS

This object represents the Commited Burst Size (CBS) of the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.10

cmAccPortQosShaperEBS

This object represents the Excess Burst Size (EBS) of the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.11

cmAccPortQosShaperBufferSize

This object represents the Buffer Size of the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.12

cmAccPortQosShaperCOS

This object provides the COS (Class of Service)
value for the QOS Shaper.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.12.1.13

cmAccPortQosShaperSoamCIRLo

This object represents the Soam Commited Information
Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.14

cmAccPortQosShaperSoamCIRHi

This object represents the Soam Commited Information
Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.15

cmAccPortQosShaperSoamEIRLo

This object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.16

cmAccPortQosShaperSoamEIRHi

This object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.17

cmAccPortQosShaperWredGreenMinQueueThreshold

This object represents the Wred green packet min queue threshold value.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.18

cmAccPortQosShaperWredGreenMaxQueueThreshold

This object represents the Wred green packet max queue threshold value.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.19

cmAccPortQosShaperWredGreenDropProbability

This object represents the Wred green packet drop probability.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.20

cmAccPortQosShaperWredYellowMinQueueThreshold

This object represents the Wred yellow packet min queue threshold value.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.21

cmAccPortQosShaperWredYellowMaxQueueThreshold

This object represents the Wred yellow packet max queue threshold value.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.22

cmAccPortQosShaperWredYellowDropProbability

This object represents the Wred yellow packet drop probability.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.12.1.23

cmEthernetAccPortCpdV2Table

table

.1.3.6.1.4.1.2544.1.12.4.1.13 · 1 row entry · 50 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetAccPortCpdV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetAccPortCpdV2Table'

A list of entries corresponding to Ethernet Access Port 
Control Protocol Disposition (CPD) V2.  This support of
CPD is provided on the GE206/GE201 device.

cmEthernetAccPortCpdV2Entry row .1.3.6.1.4.1.2544.1.12.4.1.13.1

A conceptual row in the cmEthernetAccPortCpdV2Table.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Access Port.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetAccPortCpdV2Index

Unique Index value to access the CPD row.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.13.1.1

cmEthernetAccPortCpdV2CiscoGroupDispTypedeprecated

Deprecated - each Cisco protocol has its own disposition.
Control Protocol Disposition for Cisco Group. This includes
ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge,
L2PT. Note that a specific protoco…

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.2

cmEthernetAccPortCpdV2IslDispType

Control Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.3

cmEthernetAccPortCpdV2PagpDispType

Control Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.4

cmEthernetAccPortCpdV2UdldDispType

Control Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.5

cmEthernetAccPortCpdV2CdpDispType

Control Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.6

cmEthernetAccPortCpdV2VtpDispType

Control Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.7

cmEthernetAccPortCpdV2DtpDispType

Control Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.8

cmEthernetAccPortCpdV2PvstpPlusDispType

Control Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.9

cmEthernetAccPortCpdV2UplinkFastDispType

Control Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.10

cmEthernetAccPortCpdV2VlanBridgeDispType

Control Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.11

cmEthernetAccPortCpdV2L2PTDispType

Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.12

cmEthernetAccPortCpdV2BridgeGroupDispTypedeprecated

Deprecated - individual dispositions available for each MAC.
Bridge Group Control Protocol Disposition Type. This
includes BPDU, PAUSE (IEEE 802.3x Flow Control),
LACP (Link Aggregation), LACP Marker (Marker),
EFM OA…

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.13

cmEthernetAccPortCpdV2BPDUDispType

Control Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.14

cmEthernetAccPortCpdV2PauseDispType

Control Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.15

cmEthernetAccPortCpdV2LACPDispType

Control Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.16

cmEthernetAccPortCpdV2LACPMarkerDispType

Control Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.17

cmEthernetAccPortCpdV2EfmOamDispType

Control Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.18

cmEthernetAccPortCpdV2SSMDispType

Control Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.19

cmEthernetAccPortCpdV2PortAuthenDispType

Control Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.20

cmEthernetAccPortCpdV2BridgeReservedDispTypedeprecated

Deprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.21

cmEthernetAccPortCpdV2LANBridgesDispType

Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.22

cmEthernetAccPortCpdV2GARPGroupDispTypedeprecated

Deprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.23

cmEthernetAccPortCpdV2GMRPDispType

Control Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.24

cmEthernetAccPortCpdV2GVRPDispType

Control Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:21).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.25

cmEthernetAccPortCpdV2GARPDispType

Group Disposition type which includes GARP Reserved
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.26

cmEthernetAccPortCpdV2LLDPDispTypedeprecated

Deprecated - each LLDP MAC protocol has its own disposition.
LLDP (Link Layer Discovery Protocol) Disposition type.
MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or
01:80:C2:00:00:00.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.27

cmEthernetAccPortCpdV2ELMIDispType

ELMI (Ethernet Local Management Interface) Disposition type.
MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.28

cmEthernetAccPortCpdV2L2PTTunnelMac

Configurable Layer 2 Protocol Tunneling MAC Address.
For protocols STP, CDP and VTP, with control protocol disposition as
pass-thru-l2pt, this configured MAC address replaces the DA, upon
encapsulation. For decapsul…

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.13.1.29

cmEthernetAccPortCpdV2Mac00DispType

MAC Address 01:80:C2:00:00:00 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.30

cmEthernetAccPortCpdV2Mac01DispType

MAC Address 01:80:C2:00:00:01 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.31

cmEthernetAccPortCpdV2Mac02DispType

MAC Address 01:80:C2:00:00:02 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.32

cmEthernetAccPortCpdV2Mac03DispType

MAC Address 01:80:C2:00:00:03 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.33

cmEthernetAccPortCpdV2Mac04DispType

MAC Address 01:80:C2:00:00:04 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.34

cmEthernetAccPortCpdV2Mac05DispType

MAC Address 01:80:C2:00:00:05 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.35

cmEthernetAccPortCpdV2Mac06DispType

MAC Address 01:80:C2:00:00:06 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.36

cmEthernetAccPortCpdV2Mac07DispType

MAC Address 01:80:C2:00:00:07 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.37

cmEthernetAccPortCpdV2Mac08DispType

MAC Address 01:80:C2:00:00:08 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.38

cmEthernetAccPortCpdV2Mac09DispType

MAC Address 01:80:C2:00:00:09 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.39

cmEthernetAccPortCpdV2Mac0ADispType

MAC Address 01:80:C2:00:00:0A Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.40

cmEthernetAccPortCpdV2Mac0BDispType

MAC Address 01:80:C2:00:00:0B Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.41

cmEthernetAccPortCpdV2Mac0CDispType

MAC Address 01:80:C2:00:00:0C Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.42

cmEthernetAccPortCpdV2Mac0DDispType

MAC Address 01:80:C2:00:00:0D Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.43

cmEthernetAccPortCpdV2Mac0EDispType

MAC Address 01:80:C2:00:00:0E Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.44

cmEthernetAccPortCpdV2Mac0FDispType

MAC Address 01:80:C2:00:00:0F Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.45

cmEthernetAccPortCpdV2NearestLLDPDispType

LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.46

cmEthernetAccPortCpdV2NonTpmrLLDPDispType

LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.47

cmEthernetAccPortCpdV2CustomerLLDPDispType

LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.48

cmEthernetAccPortCpdV2PtpUntaggedDispType

PTP untagged frame Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.49

cmEthernetAccPortCpdV2PtpTaggedDispType

PTP tagged frame Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.13.1.50

cmFlowCpdV2Table

table

.1.3.6.1.4.1.2544.1.12.4.1.14 · 1 row entry · 48 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmFlowCpdV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmFlowCpdV2Table'

A list of entries corresponding to Ethernet Flow 
Control Protocol Disposition V2.
This table is supported for the GE206/GE201 devices.

cmFlowCpdV2Entry row .1.3.6.1.4.1.2544.1.12.4.1.14.1

A conceptual row in the cmFlowCpdV2Table.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Flow.

Indexes

No indexes recorded

Column Syntax OID

cmFlowCpdV2Index

Unique Index value to access the CPD row.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.14.1.1

cmFlowCpdV2CiscoGroupDispTypedeprecated

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.2

cmFlowCpdV2IslDispType

Control Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.3

cmFlowCpdV2PagpDispType

Control Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.4

cmFlowCpdV2UdldDispType

Control Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.5

cmFlowCpdV2CdpDispType

Control Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.6

cmFlowCpdV2VtpDispType

Control Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.7

cmFlowCpdV2DtpDispType

Control Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.8

cmFlowCpdV2PvstpPlusDispType

Control Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.9

cmFlowCpdV2UplinkFastDispType

Control Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.10

cmFlowCpdV2VlanBridgeDispType

Control Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.11

cmFlowCpdV2L2PTDispType

Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.12

cmFlowCpdV2BridgeGroupDispTypedeprecated

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.13

cmFlowCpdV2BPDUDispType

Control Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.14

cmFlowCpdV2PauseDispType

Control Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.15

cmFlowCpdV2LACPDispType

Control Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.16

cmFlowCpdV2LACPMarkerDispType

Control Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.17

cmFlowCpdV2EfmOamDispType

Control Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.18

cmFlowCpdV2SSMDispType

Control Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.19

cmFlowCpdV2PortAuthenDispType

Control Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.20

cmFlowCpdV2BridgeReservedDispTypedeprecated

Deprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.21

cmFlowCpdV2LANBridgesDispType

Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.22

cmFlowCpdV2GARPGroupDispTypedeprecated

Deprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.23

cmFlowCpdV2GMRPDispType

Control Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.24

cmFlowCpdV2GVRPDispType

Control Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:21).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.25

cmFlowCpdV2GARPDispType

Group Disposition type which includes GARP Reserved
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.26

cmFlowCpdV2ActiveControlProtocols

List of Active Control Protocol Dispositions. Note that
if the Port Level Disposition control is set to PEER or
DISCARD, the flow level disposition is no longer active.
This object provides information on all the activ…

CmActiveControlProtocolsType

Type Values:

1	ciscoGroup
2	isl
3	pagp
4	udld
5	cdp
6	vtp
7	dtp
8	pvstpplus
9	uplinkfast
10	vlanbridge
11	l2pt
12	bridgegroup
13	bpdu
14	pause
15	lacp
16	lacpmarker
17	efmoam
18	ssm
19	portauthen
20	bridgereserved
21	lanbridges
22	garpgroup
23	gmrp
24	gvrp
25	garp
26	lldp
27	elmi
28	mac00
29	mac01
30	mac02
31	mac03
32	mac04
33	mac05
34	mac06
35	mac07
36	mac08
37	mac09
38	mac0A
39	mac0B
40	mac0C
41	mac0D
42	mac0E
43	mac0F
44	nearestlldp
45	nontpmrlldp
46	customerlldp
47	ptpNonfwdUntagged
48	ptpNonfwdTagged

.1.3.6.1.4.1.2544.1.12.4.1.14.1.27

cmFlowCpdV2LLDPDispTypedeprecated

Deprecated - each LLDP MAC protocol has its own disposition.
LLDP (Link Layer Discovery Protocol) Disposition type.
MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or
01:80:C2:00:00:00.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.28

cmFlowCpdV2ELMIDispType

ELMI (Ethernet Local Management Interface) Disposition type.
MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.29

cmFlowCpdV2Mac00DispType

MAC Address 01:80:C2:00:00:00 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.30

cmFlowCpdV2Mac01DispType

MAC Address 01:80:C2:00:00:01 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.31

cmFlowCpdV2Mac02DispType

MAC Address 01:80:C2:00:00:02 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.32

cmFlowCpdV2Mac03DispType

MAC Address 01:80:C2:00:00:03 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.33

cmFlowCpdV2Mac04DispType

MAC Address 01:80:C2:00:00:04 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.34

cmFlowCpdV2Mac05DispType

MAC Address 01:80:C2:00:00:05 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.35

cmFlowCpdV2Mac06DispType

MAC Address 01:80:C2:00:00:06 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.36

cmFlowCpdV2Mac07DispType

MAC Address 01:80:C2:00:00:07 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.37

cmFlowCpdV2Mac08DispType

MAC Address 01:80:C2:00:00:08 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.38

cmFlowCpdV2Mac09DispType

MAC Address 01:80:C2:00:00:09 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.39

cmFlowCpdV2Mac0ADispType

MAC Address 01:80:C2:00:00:0A Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.40

cmFlowCpdV2Mac0BDispType

MAC Address 01:80:C2:00:00:0B Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.41

cmFlowCpdV2Mac0CDispType

MAC Address 01:80:C2:00:00:0C Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.42

cmFlowCpdV2Mac0DDispType

MAC Address 01:80:C2:00:00:0D Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.43

cmFlowCpdV2Mac0EDispType

MAC Address 01:80:C2:00:00:0E Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.44

cmFlowCpdV2Mac0FDispType

MAC Address 01:80:C2:00:00:0F Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.45

cmFlowCpdV2NearestLLDPDispType

LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.46

cmFlowCpdV2NonTpmrLLDPDispType

LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.47

cmFlowCpdV2CustomerLLDPDispType

LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.14.1.48

cmEthernetNetPortCpdV2Table

table

.1.3.6.1.4.1.2544.1.12.4.1.15 · 1 row entry · 50 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetNetPortCpdV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetNetPortCpdV2Table'

A list of entries corresponding to Ethernet Network Port 
Control Protocol Disposition V2.
This table is supported for the GE206/GE201 devices.

cmEthernetNetPortCpdV2Entry row .1.3.6.1.4.1.2544.1.12.4.1.15.1

A conceptual row in the cmEthernetNetPortCpdV2Table.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Network Port.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetNetPortCpdV2Index

Unique Index value to access the CPD row.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.15.1.1

cmEthernetNetPortCpdV2CiscoGroupDispTypedeprecated

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.2

cmEthernetNetPortCpdV2IslDispType

Control Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.3

cmEthernetNetPortCpdV2PagpDispType

Control Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.4

cmEthernetNetPortCpdV2UdldDispType

Control Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.5

cmEthernetNetPortCpdV2CdpDispType

Control Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.6

cmEthernetNetPortCpdV2VtpDispType

Control Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.7

cmEthernetNetPortCpdV2DtpDispType

Control Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.8

cmEthernetNetPortCpdV2PvstpPlusDispType

Control Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.9

cmEthernetNetPortCpdV2UplinkFastDispType

Control Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.10

cmEthernetNetPortCpdV2VlanBridgeDispType

Control Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.11

cmEthernetNetPortCpdV2L2PTDispType

Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.12

cmEthernetNetPortCpdV2BridgeGroupDispTypedeprecated

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.13

cmEthernetNetPortCpdV2BPDUDispType

Control Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.14

cmEthernetNetPortCpdV2PauseDispType

Control Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.15

cmEthernetNetPortCpdV2LACPDispType

Control Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.16

cmEthernetNetPortCpdV2LACPMarkerDispType

Control Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.17

cmEthernetNetPortCpdV2EfmOamDispType

Control Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.18

cmEthernetNetPortCpdV2SSMDispType

Control Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).

CmControlProtocolDispTyper/w

Constraints:
range: 1-2

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.19

cmEthernetNetPortCpdV2PortAuthenDispType

Control Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).

CmControlProtocolDispTyper/w

Constraints:
range: 1-65535

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.20

cmEthernetNetPortCpdV2BridgeReservedDispTypedeprecated

Deprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.21

cmEthernetNetPortCpdV2LANBridgesDispType

Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.22

cmEthernetNetPortCpdV2GARPGroupDispTypedeprecated

Deprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.23

cmEthernetNetPortCpdV2GMRPDispType

Control Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.24

cmEthernetNetPortCpdV2GVRPDispType

Control Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:21).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.25

cmEthernetNetPortCpdV2GARPDispType

Group Disposition type which includes GARP Reserved
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.26

cmEthernetNetPortCpdV2LLDPDispTypedeprecated

Deprecated - each LLDP MAC protocol has its own disposition.
LLDP (Link Layer Discovery Protocol) Disposition type.
MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or
01:80:C2:00:00:00.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.27

cmEthernetNetPortCpdV2ELMIDispType

ELMI (Ethernet Local Management Interface) Disposition type.
MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.28

cmEthernetNetPortCpdV2L2PTTunnelMac

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.15.1.29

cmEthernetNetPortCpdV2Mac00DispType

MAC Address 01:80:C2:00:00:00 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.30

cmEthernetNetPortCpdV2Mac01DispType

MAC Address 01:80:C2:00:00:01 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.31

cmEthernetNetPortCpdV2Mac02DispType

MAC Address 01:80:C2:00:00:02 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.32

cmEthernetNetPortCpdV2Mac03DispType

MAC Address 01:80:C2:00:00:03 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.33

cmEthernetNetPortCpdV2Mac04DispType

MAC Address 01:80:C2:00:00:04 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.34

cmEthernetNetPortCpdV2Mac05DispType

MAC Address 01:80:C2:00:00:05 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.35

cmEthernetNetPortCpdV2Mac06DispType

MAC Address 01:80:C2:00:00:06 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.36

cmEthernetNetPortCpdV2Mac07DispType

MAC Address 01:80:C2:00:00:07 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.37

cmEthernetNetPortCpdV2Mac08DispType

MAC Address 01:80:C2:00:00:08 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.38

cmEthernetNetPortCpdV2Mac09DispType

MAC Address 01:80:C2:00:00:09 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.39

cmEthernetNetPortCpdV2Mac0ADispType

MAC Address 01:80:C2:00:00:0A Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.40

cmEthernetNetPortCpdV2Mac0BDispType

MAC Address 01:80:C2:00:00:0B Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.41

cmEthernetNetPortCpdV2Mac0CDispType

MAC Address 01:80:C2:00:00:0C Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.42

cmEthernetNetPortCpdV2Mac0DDispType

MAC Address 01:80:C2:00:00:0D Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.43

cmEthernetNetPortCpdV2Mac0EDispType

MAC Address 01:80:C2:00:00:0E Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.44

cmEthernetNetPortCpdV2Mac0FDispType

MAC Address 01:80:C2:00:00:0F Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.45

cmEthernetNetPortCpdV2NearestLLDPDispType

LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.46

cmEthernetNetPortCpdV2NonTpmrLLDPDispType

LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.47

cmEthernetNetPortCpdV2CustomerLLDPDispType

LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.48

cmEthernetNetPortCpdV2PtpUntaggedDispType

PTP non forwarding untagged frame Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.49

cmEthernetNetPortCpdV2PtpTaggedDispType

PTP tagged frame Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.15.1.50

bitsPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.16 · 1 row entry · 20 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk bitsPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::bitsPortTable'

A list of entries corresponding to BITS Port 
Facilities for configuration purposes.

bitsPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.16.1

A conceptual row in the bitsPortTable.

Indexes

No indexes recorded

Column Syntax OID

bitsPortTypeIndex

An integer index value used to uniquely identify
this BITS Port within the card. Value 1 stands for
BITS-IN, 2 for BITS-OUT.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.16.1.1

bitsPortIndex

An integer index value used to uniquely identify
this BITS Port within the card.
Note that each BITs Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, bitsPortIndex.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.16.1.2

bitsPortIfIndex

This object has the same value as ifIndex for
Bits Port. An integer index value used to
uniquely identify this Bits Port.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.16.1.3

bitsPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.16.1.4

bitsPortAdminState

This object represents the Administrative State of the BITS
Port.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.16.1.5

bitsPortOperationalState

This object represents the Operational State of the BITS
Port.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.16.1.6

bitsPortSecondaryState

This object represents the Secondary State of the BITS
Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.16.1.7

bitsPortType

This object represents the BITS Port Type.

BitsPortType

Type Values:

1	bits-in
2	bits-out

.1.3.6.1.4.1.2544.1.12.4.1.16.1.8

bitsPortLineType

This object represents the BITS Port Line Type.
Determines whether the T1/E1 BITS port operates in T1, E1,
or 2048kHz mode.

BitsPortLineTyper/w

Type Values:

1	t1
2	e1
3	type-2048kHz

.1.3.6.1.4.1.2544.1.12.4.1.16.1.9

bitsPortLineCode

This object represents the BITS Port Line Code.
When the port is configured for a Line Type of T1,
the valid values are t1-b8zs and t1-ami and the default value
is t1-b8zs. When the port is configured for a Line Type o…

BitsPortLineCoder/w

Type Values:

1	none
2	t1-b8zs
3	t1-ami
4	e1-hdb3
5	e1-ami

.1.3.6.1.4.1.2544.1.12.4.1.16.1.10

bitsPortFrameFormat

This object represents the BITS Port Frame Format.
When the port is configured for a Line Type of T1, the
valid values are t1-sf and t1-esf and the default value is t1-esf.
When the port is configured for a Line Type of…

BitsFrameFormatr/w

Type Values:

1	none
2	t1-sf
3	t1-esf
4	e1-unframed
5	e1-crc4
6	e1-dualframe

.1.3.6.1.4.1.2544.1.12.4.1.16.1.11

bitsPortSaBitDesignation

This object represents the BITS Port Sa Bit Designation.
Determines which E1 Sa Bit is used to transmit/receive the SSM.
For T1 and 2048khz Line Types, the only allowed value is None.
For E1 Line Type, the default val…

SaBitDesignationr/w

Type Values:

1	none
2	bit4
3	bit5
4	bit6
5	bit7
6	bit8

.1.3.6.1.4.1.2544.1.12.4.1.16.1.12

bitsPortQLModeEnabled

This object allows to specify whether the BITS Port
can be enabled/disabled for QL Mode.
When enabled, on receive side
-port shall PEER the SSM (Sync Status Messages) slow protocol PDUs
and take appropriate act…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.16.1.13

bitsPortExpectedQL

This object allows to specify the expected QL when the
BITS Port is enabled for QL Mode.
This object allows the user to set a minimum
expected received Quality Level on the port.
The default value shall be None.

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.16.1.14

bitsPortAssumedQL

This object allows to specify the assumed QL on the
BITS Port. The Assumed QL is only meaningful if the
Network Clock Type (see fsp150cm-sync.mib) is option1 and the
port's QL Mode is disabled and the port is being …

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.16.1.15

bitsPortReceivedQL

This object provides the Received QL value for the BITS port.
If the BITS port's QL Mode is disabled, then the received
QL value is not applicable.

F3-SYNC-MIBSSMQualityLevel

Constraints:
range: 0-64

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.16.1.16

bitsPortTransmitQL

This object provides the Transmitted QL value for the BITS port.
If the BITS port's QL Mode is disabled, then the received
QL value is not applicable.

F3-SYNC-MIBSSMQualityLevel

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.16.1.17

bitsPortSquelchQL

This object allows to set the Squelch QL for the BITS-OUT port.
The Squelch QL is only meaningful if the QL Mode is Enabled.
The Squelch QL is used to determine whether or not to squelch
the output of the BITS-OUT po…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.16.1.18

bitsPortLineBuildOut

This object allows to manage the line build out on the BITS-OUT port when
the Line Type is T1.

LineBuildOutr/w

Constraints:
range: 1-5

Type Values:

0	none
1	lbo-0-133ft
2	lbo-133-266ft
3	lbo-266-399ft
4	lbo-399-533ft
5	lbo-533-655ft
6	lbo-7dot5db
7	lbo-15db
8	lbo-22dot5db

.1.3.6.1.4.1.2544.1.12.4.1.16.1.19

bitsPortImpedance

This object provides the impedance mode for the BITS-OUT port.

BitsPortImpedanceMode

Type Values:

1	bits-120Ohm
2	bits-100Ohm

.1.3.6.1.4.1.2544.1.12.4.1.16.1.20

ieee1588EthernetPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.17 · 1 row entry · 11 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk ieee1588EthernetPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::ieee1588EthernetPortTable'

A list of entries corresponding to IEEE Ethernet Port
Facilities for configuration purposes.

ieee1588EthernetPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.17.1

A conceptual row in the IEEE Ethernet Port Table.

Indexes

No indexes recorded

Column Syntax OID

ieee1588EthernetPortIndex

An integer index value used to uniquely identify
the IEEE Ethernet Port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.17.1.1

ieee1588EthernetPortIfIndex

This object has the same value as ifIndex for
the IEEE Ethernet Port.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.17.1.2

ieee1588EthernetPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Constraints:
range: 1-8

.1.3.6.1.4.1.2544.1.12.4.1.17.1.3

ieee1588EthernetPortAdminState

This object represents the Administrative State of the
Port.

CM-COMMON-MIBAdminStater/w

Constraints:
range: 0-7

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.17.1.4

ieee1588EthernetPortOperationalState

This object represents the Operational State of the
Port.

CM-COMMON-MIBOperationalState

Constraints:
range: 0-7

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.17.1.5

ieee1588EthernetPortSecondaryState

This object represents the Secondary State of the
Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.17.1.6

ieee1588EthernetPortMTU

This object provides the MTU on the Port.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.17.1.7

ieee1588EthernetPortMediaType

This object represents the type of Media.

CM-COMMON-MIBEthernetMediaTyper/w

Type Values:

0	not-applicable
1	copper
2	fiber
3	coppersfp
4	auto
5	none

.1.3.6.1.4.1.2544.1.12.4.1.17.1.8

ieee1588EthernetPortConfigSpeed

This object allows to configure the speed of the Port.

CM-COMMON-MIBEthernetPortSpeedr/w

Constraints:
range: 1-8

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.17.1.9

ieee1588EthernetPortNegotiatedSpeed

This object provides the negotiated speed of the
Port.

CM-COMMON-MIBEthernetPortSpeed

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.17.1.10

ieee1588EthernetPortMDIXType

This object allows management of MDIX property on
Port.

CmEthernetMDIXTyper/w

Type Values:

1	not-applicable
2	auto-mdix
3	crossed
4	uncrossed
5	notAvailable

.1.3.6.1.4.1.2544.1.12.4.1.17.1.11

gps10MHzPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.18 · 1 row entry · 15 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk gps10MHzPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::gps10MHzPortTable'

A list of entries corresponding to GPS 10MHz 
Facilities for configuration purposes.

gps10MHzPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.18.1

A conceptual row in the GPS 10MHz Port Table.

Indexes

No indexes recorded

Column Syntax OID

gps10MHzPortIndex

An integer index value used to uniquely identify
the IEEE Ethernet Port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.18.1.1

gps10MHzPortIfIndex

This object has the same value as ifIndex for
the IEEE Ethernet Port.

IF-MIBInterfaceIndex

Constraints:
range: 1-8

Description:

.1.3.6.1.4.1.2544.1.12.4.1.18.1.2

gps10MHzPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.18.1.3

gps10MHzPortAdminState

This object represents the Administrative State of the
Port.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.18.1.4

gps10MHzPortOperationalState

This object represents the Operational State of the
Port.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.18.1.5

gps10MHzPortSecondaryState

This object represents the Secondary State of the
Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.18.1.6

gps10MHzPortSignalDirection

This object allows specification of the signal type
(i.e. input or output).

CM-COMMON-MIBSignalDirectionTyper/w

Type Values:

1	input
2	output

.1.3.6.1.4.1.2544.1.12.4.1.18.1.7

gps10MHzPortSquelchControl

This object allows to set the Squelch Control for the 10MHz port.
The Squelch Control is used to determine the type of squelch control
used to squelch the output of the TOD port. Only option supported
is squelch-ql.

F3-SYNC-MIBSquelchControlr/w

Constraints:
range: 1-3

Type Values:

1	never
2	holdover
3	lock
4	squelch-ql

.1.3.6.1.4.1.2544.1.12.4.1.18.1.8

gps10MHzPortSquelchQL

This object allows to set the Squelch QL for the 10MHz port.
This value is used when f310MHzClockPortSquelchControl is squelch-ql.
The Squelch QL is used to determine whether or not to squelch
the output of the TOD po…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.18.1.9

gps10MHzPortFrequencySource

This object allows to set the Frequency Source for the Port.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.18.1.10

gps10MHzPortClockClassdeprecated

This object specify GPS port clock class.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.18.1.11

gps10MHzPortClockAccuracydeprecated

This object specify GPS port clock accuracy.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.18.1.12

gps10MHzPortTimeSourcedeprecated

This object specify GPS port time source.

F3-SYNC-MIBTimeSource

Constraints:
range: 1-8

Type Values:

1	atomic
2	gps
3	ptp
4	internal
5	other

.1.3.6.1.4.1.2544.1.12.4.1.18.1.13

gps10MHzPortAssumedQL

This object allows to specify the assumed QL on the
GPS Port. The Assumed QL is only meaningful if the
Network Clock Type (see fsp150cm-sync.mib) is option1 and the
port's QL Mode is disabled and the port is being u…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.18.1.14

gps10MHzPortAlias

This object allows SNMP management entities to provide an
alias to the gps 10MHz Port entity.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.18.1.15

cmEthernetNetPortClbTable

table

.1.3.6.1.4.1.2544.1.12.4.1.19 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetNetPortClbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetNetPortClbTable'

A list of entries corresponding to Ethernet Network Port 
Cable Length Benchmark.

cmEthernetNetPortClbEntry row .1.3.6.1.4.1.2544.1.12.4.1.19.1

A conceptual row in the cmEthernetNetPortClbTable.
These entries represent Cable Length Benchmarks
on the Ethernet Network Port.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetNetPortClbIndex

An integer index value used to uniquely identify
this Cable Length Benchmark Entry specification.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.19.1.1

cmEthernetNetPortClbEnabled

This enables specification of Cable Length Benchmark entry.

SNMPv2-TCTruthValuer/w

Constraints:
range: 1-8

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.19.1.2

cmEthernetNetPortClbLength

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.19.1.3

cmEthernetNetPortClbDescr

A textual string containing description of cable span.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.19.1.4

cmNetPortPrioMapTable

table

.1.3.6.1.4.1.2544.1.12.4.1.20 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmNetPortPrioMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmNetPortPrioMapTable'

A list of entries corresponding to Ethernet Network Port Priority Mappings
in multi Class of Service (COS) mode.

cmNetPortPrioMapEntry row .1.3.6.1.4.1.2544.1.12.4.1.20.1

A conceptual row in the cmNetPortPrioMapTable.

Indexes

No indexes recorded

Column	Syntax	OID
cmNetPortPrioMapIndex The integer index value corresponding to a priority value.	Integer32	`.1.3.6.1.4.1.2544.1.12.4.1.20.1.1`
cmNetPortPrioMapInPriority The integer index value corresponding to a priority value.	Integer32r/w Constraints: `range: 1-3`	`.1.3.6.1.4.1.2544.1.12.4.1.20.1.2`
cmNetPortPrioMapCOS This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.	Integer32r/w	`.1.3.6.1.4.1.2544.1.12.4.1.20.1.3`
cmNetPortPrioMapOuterTagPriority This allows specification of the VLAN priority that will replace the outgoing (N2A direction) outer-tag's priority. Note that, each flow participates or not in outer-tag priority mapping, using the object 'cmFlowN2AOute…	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.20.1.4`

cmAccPortPcpDEEncTable

table

.1.3.6.1.4.1.2544.1.12.4.1.21 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmAccPortPcpDEEncTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmAccPortPcpDEEncTable'

Ethernet Access Port PCP drop eligibility encoding table. This
is applied to a frame that is egressing at the Access port.

cmAccPortPcpDEEncEntry row .1.3.6.1.4.1.2544.1.12.4.1.21.1

A conceptual row in the ethernetPBPcpDEEncPortTable.

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex cmEthernetTrafficPortIndex

Column	Syntax	OID
cmAccPortPcpDEEncIndex An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.2544.1.12.4.1.21.1.1`
cmAccPortPcpDEEncInPriority This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.21.1.2`
cmAccPortPcpDEEncDropIneligiblePrio This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.21.1.3`
cmAccPortPcpDEEncDropEligiblePrio This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.21.1.4`

cmAccPortPcpDEDecTable

table

.1.3.6.1.4.1.2544.1.12.4.1.22 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmAccPortPcpDEDecTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmAccPortPcpDEDecTable'

Ethernet Access Port PCP drop eligibility decoding table. This
is applied to a frame that is ingressing at a port.

cmAccPortPcpDEDecEntry row .1.3.6.1.4.1.2544.1.12.4.1.22.1

A conceptual row in the ethernetPBPcpDEDecPortTable.

Indexes

No indexes recorded

Column Syntax OID

cmAccPortPcpDEDecIndex

An integer index value used to uniquely identify
a row in the PCP drop eligible decoding table.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.22.1.1

cmAccPortPcpDEDecInPriority

This object is the input priority that is decoded to get
priority and the drop eligibility of a frame.

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.22.1.2

cmAccPortPcpDEDecOutPriority

This object is the priority value decoded from a incoming PCP value.

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.22.1.3

cmAccPortPcpDEDecDropEligible

This object is the drop eligibility decoded from a incoming
PCP value.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.22.1.4

cmAccPortPcpDEPairTable

table

.1.3.6.1.4.1.2544.1.12.4.1.23 · 1 row entry · 3 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmAccPortPcpDEPairTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmAccPortPcpDEPairTable'

Ethernet Access Port PCP drop eligibility priority pair table.
The priority pair is encoded to same drop eligibility and
drop ineligibility priority. Depending on the PCP DE Enc/Dec
mode there can be upto 3 pairs in the table. There will one
pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.

cmAccPortPcpDEPairEntry row .1.3.6.1.4.1.2544.1.12.4.1.23.1

A conceptual row in the cmAccPortPcpDEPairEntry.

Indexes

No indexes recorded

Column	Syntax	OID
cmAccPortPcpDEPairIndex An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.	Integer32 Constraints: `range: 0-16`	`.1.3.6.1.4.1.2544.1.12.4.1.23.1.1`
cmAccPortPcpDEDropIneligiblePrio This object is the drop ineligible priority.	CM-COMMON-MIBVlanPriorityr/w Constraints: `range: 0-16`	`.1.3.6.1.4.1.2544.1.12.4.1.23.1.2`
cmAccPortPcpDEDropEligiblePrio This object is the drop eligible priority.	CM-COMMON-MIBVlanPriorityr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.2544.1.12.4.1.23.1.3`

cmNetPortPcpDEEncTable

table

.1.3.6.1.4.1.2544.1.12.4.1.24 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmNetPortPcpDEEncTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmNetPortPcpDEEncTable'

Ethernet Network Port PCP drop eligibility encoding table. This
is applied to a frame that is egressing at the Network port.

cmNetPortPcpDEEncEntry row .1.3.6.1.4.1.2544.1.12.4.1.24.1

A conceptual row in the ethernetPBPcpDEEncPortTable.

Indexes

No indexes recorded

Column	Syntax	OID
cmNetPortPcpDEEncIndex An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.	Integer32	`.1.3.6.1.4.1.2544.1.12.4.1.24.1.1`
cmNetPortPcpDEEncInPriority This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.24.1.2`
cmNetPortPcpDEEncDropIneligiblePrio This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.24.1.3`
cmNetPortPcpDEEncDropEligiblePrio This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.24.1.4`

cmNetPortPcpDEDecTable

table

.1.3.6.1.4.1.2544.1.12.4.1.25 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmNetPortPcpDEDecTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmNetPortPcpDEDecTable'

Ethernet Network Port PCP drop eligibility decoding table. This
is applied to a frame that is ingressing at a port.

cmNetPortPcpDEDecEntry row .1.3.6.1.4.1.2544.1.12.4.1.25.1

A conceptual row in the ethernetPBPcpDEDecPortTable.

Indexes

No indexes recorded

Column Syntax OID

cmNetPortPcpDEDecIndex

An integer index value used to uniquely identify
a row in the PCP drop eligible decoding table.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.25.1.1

cmNetPortPcpDEDecInPriority

This object is the input priority that is decoded to get
priority and the drop eligibility of a frame.

CM-COMMON-MIBVlanPriorityr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2544.1.12.4.1.25.1.2

cmNetPortPcpDEDecOutPriority

This object is the priority value decoded from a incoming PCP value.

CM-COMMON-MIBVlanPriorityr/w

Constraints:
range: 0-6

.1.3.6.1.4.1.2544.1.12.4.1.25.1.3

cmNetPortPcpDEDecDropEligible

This object is the drop eligibility decoded from a incoming
PCP value.

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-6

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.25.1.4

cmNetPortPcpDEPairTable

table

.1.3.6.1.4.1.2544.1.12.4.1.26 · 1 row entry · 3 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmNetPortPcpDEPairTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmNetPortPcpDEPairTable'

Ethernet Network Port PCP drop eligibility priority pair table.
The priority pair is encoded to same drop eligibility and
drop ineligibility priority. Depending on the PCP DE Enc/Dec
mode there can be upto 3 pairs in the table. There will one
pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.

cmNetPortPcpDEPairEntry row .1.3.6.1.4.1.2544.1.12.4.1.26.1

A conceptual row in the cmNetPortPcpDEPairEntry.

Indexes

No indexes recorded

Column	Syntax	OID
cmNetPortPcpDEPairIndex An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.	Integer32	`.1.3.6.1.4.1.2544.1.12.4.1.26.1.1`
cmNetPortPcpDEDropIneligiblePrio This object is the drop ineligible priority.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.26.1.2`
cmNetPortPcpDEDropEligiblePrio This object is the drop eligible priority.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.26.1.3`

cmEthernetTrafficPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.27 · 1 row entry · 114 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetTrafficPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetTrafficPortTable'

A list of entries corresponding to Ethernet 
Facilities for configuration purposes.

cmEthernetTrafficPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.27.1

A conceptual row in the cmEthernetTrafficPortTable.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetTrafficPortIndex

An integer index value used to uniquely identify
this Ethernet Port within a card.
Note that each Ethernet Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, cmEthernetTrafficPortIndex.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.27.1.1

cmEthernetTrafficPortIfIndex

This object has the same value as ifIndex for
Ethernet Port. An integer index value used to
uniquely identify this Ethernet Port.

IF-MIBInterfaceIndex

Constraints:
range: 0-512

Description:

.1.3.6.1.4.1.2544.1.12.4.1.27.1.2

cmEthernetTrafficPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.27.1.3

cmEthernetTrafficPortAdminState

This object represents the Administrative State of the Ethernet Port.

CM-COMMON-MIBAdminStater/w

Constraints:
range: 0-512

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.27.1.4

cmEthernetTrafficPortOperationalState

This object represents the Operational State of the Ethernet Port.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.27.1.5

cmEthernetTrafficPortSecondaryState

This object represents the Secondary State of the Ethernet Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.27.1.6

cmEthernetTrafficPortMTU

This object provides the MTU on the Ethernet Port.
The object is made read-write for FSP150CC devices.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.27.1.7

cmEthernetTrafficPortMediaType

This object represents the type of Ethernet Media on the
Ethernet Port.
The media type includes,
copper (1)
fiber (2)
coppersfp (3)
CM Aggregation Product doesn't support copper.

CM-COMMON-MIBEthernetMediaTyper/w

Type Values:

0	not-applicable
1	copper
2	fiber
3	coppersfp
4	auto
5	none

.1.3.6.1.4.1.2544.1.12.4.1.27.1.8

cmEthernetTrafficPortConfigSpeed

This object allows to configure the speed of the
Ethernet Port.

CM-COMMON-MIBEthernetPortSpeedr/w

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.27.1.9

cmEthernetTrafficPortNegotiatedSpeed

This object provides the negotiated speed of the
Ethernet Port.

CM-COMMON-MIBEthernetPortSpeed

Type Values:

0	speed-unknown
1	speed-10MB-full
2	speed-10MB-half
3	speed-100MB-full
4	speed-100MB-half
5	speed-1000MB-full
6	speed-1000MB-half
7	speed-auto
8	speed-auto-10MB-full
9	speed-auto-10MB-half
10	speed-auto-100MB-full
11	speed-auto-100MB-half
12	speed-auto-1000MB-full
13	speed-auto-1000MB-half
14	speed-negotiating
15	speed-auto-1000MB-full-master
16	speed-auto-1000MB-full-slave
17	speed-none
18	speed-auto-1000MB-full-master-preferred
19	speed-auto-1000MB-full-slave-preferred
20	speed-10G-full
21	speed-auto-detect

.1.3.6.1.4.1.2544.1.12.4.1.27.1.10

cmEthernetTrafficPortMDIXType

This object allows management of MDIX property on
Ethernet Port.

CmEthernetMDIXTyper/w

Type Values:

1	not-applicable
2	auto-mdix
3	crossed
4	uncrossed
5	notAvailable

.1.3.6.1.4.1.2544.1.12.4.1.27.1.11

cmEthernetTrafficPortMDIXStatus

This object provides the current MDIX status of the
Ethernet port.

CmEthernetMDIXType

Type Values:

1	not-applicable
2	auto-mdix
3	crossed
4	uncrossed
5	notAvailable

.1.3.6.1.4.1.2544.1.12.4.1.27.1.12

cmEthernetTrafficPortSfpVendorName

This object provides the vendor name of the SFP.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.27.1.13

cmEthernetTrafficPortSfpPartNumber

This object provides the part number of the SFP.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.27.1.14

cmEthernetTrafficPortSfpSerialNumber

This object provides the serial number of the SFP.
This is shown only when cmEthernetTrafficPortMediaType is fiber.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.27.1.15

cmEthernetTrafficPortSfpDateOfManufacture

This object provides the date of manufacture of the SFP.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.4.1.27.1.16

cmEthernetTrafficPortSfpConnectorValue

This object provides the SFP connector value.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.

CM-COMMON-MIBSfpConnectorValue

Type Values:

0	not-applicable
1	unknown
2	sc
3	fcs1cu
4	fcs2cu
5	bnc-tnc
6	fccoaxhdr
7	fjack
8	lc
9	mt-rj
10	mu
11	sg
12	optpigtail
13	hssdc
14	cupigtail
15	vendorspecific
16	rj45

.1.3.6.1.4.1.2544.1.12.4.1.27.1.17

cmEthernetTrafficPortSfpLinkLength

This object provides the SFP Link Length.
This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.27.1.18

cmEthernetTrafficPortSfpLaserWaveLength

This object provides the SFP Laser Wave Length in nano meters.
This is applicable only when cmEthernetTrafficPortMediaType is fiber.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.27.1.19

cmEthernetTrafficPortSfpMediaType

This object provides the SFP Media Type.
This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.

CM-COMMON-MIBSfpMediaType

Type Values:

0	not-applicable
1	singlemode
2	multimode
3	multimode62-5
4	copper

.1.3.6.1.4.1.2544.1.12.4.1.27.1.20

cmEthernetTrafficPortLoopbackConfig

This object allows to initiate loopbacks on
on the Ethernet Port.

CmLoopbackTyper/w

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.27.1.21

cmEthernetTrafficPortLoopbackStatus

This object provides status of the current loopback
on the Ethernet Port.

CmLoopbackType

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.27.1.22

cmEthernetTrafficPortLoopbackTime

This object allows to specify time for timed-loopbacks on
on the Ethernet Port.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.27.1.23

cmEthernetTrafficPortLoopbackSwapSADA

This object allows to specify whether or not the loopbacked
frame will have the Source Address and Destination Address
swapped.

CmSwapSADATyper/w

Type Values:

0	not-applicable
1	noswapSADA
2	swapSADA
3	swapDAOverrideSA
4	swapSADAMacOnly
5	swapDAOverridesSAMacOnly
6	swapIP
7	swapTCPUDP

.1.3.6.1.4.1.2544.1.12.4.1.27.1.24

cmEthernetTrafficPortOuterVlanLoopbackMask

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.27.1.25

cmEthernetTrafficPortOuterVlanLoopback1

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.27.1.26

cmEthernetTrafficPortOuterVlanLoopback2

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.27.1.27

cmEthernetTrafficPortOuterVlanLoopback3

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.27.1.28

cmEthernetTrafficPortLinkLossFwdEnabled

This object allows enabling/disabling link loss forwarding
on the Ethernet Port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.29

cmEthernetTrafficPortLinkLossFwdSignalType

This object allows definition of the link loss forwarding
signalling type. This is applicable only if
cmEthernetTrafficPortLinkLossFwdEnabled is enabled.

CmLinkLossFwdSignalTyper/w

Type Values:

0	not-applicable
1	llf-efm-signal
2	llf-link-down
3	llf-odu-ais
4	llf-odu-lck
5	llf-odu-tim
6	llf-odu-bdi
7	llf-opu-plm
8	llf-opu-csf
9	llf-eth-epc

.1.3.6.1.4.1.2544.1.12.4.1.27.1.30

cmEthernetTrafficPortLinkLossFwdTriggerTypes

This object allows definition of the link loss forwarding
trigger types. This is applicable only if
cmEthernetTrafficPortLinkLossFwdEnabled is enabled.

CmLinkLossFwdTriggerTypesr/w

Type Values:

1	trig-efm-signal
2	trig-link-down
3	trig-odu-ais
4	trig-odu-lck
5	trig-odu-tim
6	trig-odu-bdi
7	trig-opu-plm
8	trig-opu-csf

.1.3.6.1.4.1.2544.1.12.4.1.27.1.31

cmEthernetTrafficPortLinkLossFwdDelay

This object allows specification of the delay between
detection of link loss and signalling of link loss forwarding.
Time specified is in seconds.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.27.1.32

cmEthernetTrafficPortLinkLossFwdActive

This object provides the link loss forwarding status indicating
if link loss forwarding is currently being signaled via
the port.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.33

cmEthernetTrafficPortLinkLossFwdPartnerEnabled

This object provides the indication of a link partners ability
to support link loss forwarding via EFM, i.e. from
received organization specific OAMPDUs.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.34

cmEthernetTrafficPortLinkLossFwdLocalLinkId

This object allows configuration of the Local Link Id on
Ethernet port.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.27.1.35

cmEthernetTrafficPortLinkLossFwdRemoteLinkIds

This object allows enabling/disabling Remote Link Ids
on Ethernet port. the Ethernet port is able to distinguish
the remote side client ports from the Remote Link Down
PDUs coming from remote end. The cmEthernetTraffi…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.27.1.36

cmEthernetTrafficPortLinkLossFwdTxActionType

This object allows to specify the Ethernet Port's behavior when
link loss forwarding trigger events occur on the Port.
This provides ability to configure per Ethernet port LLF behavior.

CmLinkLossFwdTxActionTyper/w

Type Values:

0	not-applicable
1	llf-tx-no-action
2	llf-tx-efm-signal
3	llf-tx-link-down
4	llf-odu-ais
5	llf-opu-csf
6	llf-otu-ais

.1.3.6.1.4.1.2544.1.12.4.1.27.1.37

cmEthernetTrafficPortLinkLossFwdRxRLDLinkIds

This object provides the received Remote Link IDs in
EFM RLD messages on the Ethernet Port.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.27.1.38

cmEthernetTrafficPortOamId

OAM Id. This is unique EFM OAM sublayer port id.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.27.1.39

cmEthernetTrafficPortOamDiscoveryState

Ethernet Port's OAM discovery state.

CmOamDiscoveryState

Type Values:

0	unknown
1	fault
2	activesendlocal
3	passivewait
4	sendlocalremote
5	sendlocalremoteok
6	sendany

.1.3.6.1.4.1.2544.1.12.4.1.27.1.40

cmEthernetTrafficPortOamLocalVarRtrvsEnabled

This object allows specification of whether the Ethernet
Port supports sending variable response OAMPDUs.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.41

cmEthernetTrafficPortOamLocalLinkEventsEnabled

This object allows specification of whether the Ethernet
Port supports interpreting Link Events.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.42

cmEthernetTrafficPortOamLocalOamLoopbacksSupported

This object allows specification of whether the Ethernet
Port is capable of OAM remote loopback mode.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.43

cmEthernetTrafficPortOamLocalUnidirSupportEnabled

This object allows specification of whether the Ethernet
Port is capable of sending OAMPDUs when the receive path
is non-operational.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.44

cmEthernetTrafficPortOamLocalMaxPDUSize

This object represents the largest OAMPDU, in octets,
supported by the Ethernet Port. This value is
compared to the remote Maximum PDU Size and the smaller of
the two is used.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.27.1.45

cmEthernetTrafficPortOamLocalMode

This object allows to configure the OAM sublayer entity in
either Active or Passive mode.

CmOamModer/w

Type Values:

0	unknown
1	active
2	passive

.1.3.6.1.4.1.2544.1.12.4.1.27.1.46

cmEthernetTrafficPortOamRemoteMacAddress

This object allows retrieval of the Remote Mac Address.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.27.1.47

cmEthernetTrafficPortOamRemoteVarRtrvsEnabled

This object allows retrieval of whether the remote OAM
entity supports sending variable response OAMPDUs.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.48

cmEthernetTrafficPortOamRemoteLinkEventsEnabled

This object allows retrieval of whether the remote OAM
entity supports interpreting Link Events.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.49

cmEthernetTrafficPortOamRemoteOamLoopbacksSupported

This object allows retrieval of whether the remote OAM
entity supports OAM remote loopback mode.

SNMPv2-TCTruthValue

Constraints:
range: 0-16

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.50

cmEthernetTrafficPortOamRemoteUnidirSupportEnabled

This object allows retrieval of whether the remote
OAM entity is capable of sending OAMPDUs when the receive path
is non-operational.

SNMPv2-TCTruthValue

Constraints:
range: 0-6

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.51

cmEthernetTrafficPortOamRemoteMaxPDUSize

This object allows retrieval of the remote OAM
entity maximum OAMPDU size.

SNMPv2-SMIInteger32

Constraints:
range: 0-6

.1.3.6.1.4.1.2544.1.12.4.1.27.1.52

cmEthernetTrafficPortOamRemoteMode

This object allows to retrieve whether the remote OAM
sublayer entity is either in Active or Passive mode.

CmOamMode

Constraints:
range: 0-6

Type Values:

0	unknown
1	active
2	passive

.1.3.6.1.4.1.2544.1.12.4.1.27.1.53

cmEthernetTrafficPortOamEnabled

This object allows to manage the EFM OAM on Ethernet Traffic Port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.54

cmEthernetTrafficPortOamAdminState

This object provides the EFM OAM Admin State.

CmOamAdminState

Type Values:

0	not-applicable
1	enabled
2	disabled

.1.3.6.1.4.1.2544.1.12.4.1.27.1.55

cmEthernetTrafficPortSvcType

This object allows specification of whether the
Ethernet Port is port based or vlan based.

CmEthernetTrafficSvcTyper/w

Type Values:

1	all-to-one
2	service-multiplexing

.1.3.6.1.4.1.2544.1.12.4.1.27.1.56

cmEthernetTrafficPortRxPauseEnabled

This object defines the RxPause enable or disable of the port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.57

cmEthernetTrafficPortTxPauseEnabled

This object allows enabling/disabling transmit pause frames on
Ethernet port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.58

cmEthernetTrafficPortAfpType

This object allows specification of the Acceptable Frame Policy on
Ethernet port. Users can specify whether the port supports
only tagged frames, only untagged frames or both tagged and
untagged frames.

CmAfpTyper/w

Type Values:

1	tagged
2	untagged
3	all

.1.3.6.1.4.1.2544.1.12.4.1.27.1.59

cmEthernetTrafficPortShapingEnabled

This object allows to manage the Ethernet Port Shaping.
When enabled, values in cmEthernetTrafficPortShapedSpeedLo and
cmEthernetTrafficPortShapedSpeedHi are applicable.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.60

cmEthernetTrafficPortShapedSpeedLo

This object allows to specify the lower 32 bits of
the Ethernet Port Shaped speed. This value is applicable
when cmEthernetTrafficPortShapingEnabled is enabled.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.27.1.61

cmEthernetTrafficPortShapedSpeedHi

This object allows to specify the higher 32 bits of
the Port Shaped speed. This value is applicable
when cmEthernetTrafficPortShapingEnabled is enabled.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.27.1.62

cmEthernetTrafficPortQinQEtherType

This object allows to specify the Q-in-Q Ether Type
on the Port.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.27.1.63

cmEthernetTrafficPortTagFrameControl

This object defines if c-tag/s-tag frame is allowed to pass through,
available only when AFP is set to Tagged.

CM-COMMON-MIBAfpTagControlr/w

Type Values:

1	ctag
2	stag
3	both

.1.3.6.1.4.1.2544.1.12.4.1.27.1.64

cmEthernetTrafficPortEgressVlanTrunkingEnabled

This object allows to enable or disable the VLAN trunking on
Ethernet port. Disabling VLAN trunking removes all
VLAN tags before transmitting traffic out of the port.
This object is only applicable for connection-orien…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.65

cmEthernetTrafficPortIngressPushPVIDEnabled

This object allows to specify whether cmEthernetTrafficPortPortVlanId
value will be PUSHed on untagged frames or not in the
ingress direction. This object is only applicable
for connection-oriented, evpl service type.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.66

cmEthernetTrafficPortEgressPopPVIDEnabled

This object allows to specify whether cmEthernetTrafficPortPortVlanId
value will be POPed in the
egress direction. This object is only applicable
for connection-oriented, evpl service type.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.67

cmEthernetTrafficPortEgressPopPriorityVidEnabled

This object defines the egress PopPriorityVid enable or disable of the port.
If it is enabled, the outgoing packets with VID=Priority VLAN ID
will be swapped back to VID=0.

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-256

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.68

cmEthernetTrafficPortPortVlanId

This object allows to specify the Ethernet Port VLAN Id
to PUSH on untagged frames in the to Network
direction. This object is only applicable for connection-oriented,
evpl service type, when cmEthernetTrafficPortIngr…

CM-COMMON-MIBVlanIdr/w

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.4.1.27.1.69

cmEthernetTrafficPortPortVlanPriority

This object allows to specify the Ethernet Port VLAN Priority
for the PUSHed VLAN tag (specified by cmEthernetTrafficPortPortVlanId)
on untagged frames in the ingress direction.
This object is only applicable for co…

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.27.1.70

cmEthernetTrafficPortPriorityVlanId

This object allows to specify the Ethernet Priority VLAN Id
to replace the null-tagged or priority tagged frames in the
to ingress direction. This object is only applicable
for connection-oriented, evpl service type.

CM-COMMON-MIBVlanIdr/w

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.4.1.27.1.71

cmEthernetTrafficPortIngressPrioMapMode

This object allows to specify the Ethernet Port
Priority Mapping Mode used for classification of frames.
This object is only applicable for connection-oriented,
evpl service type.

CM-COMMON-MIBPriorityMapModer/w

Type Values:

1	priomap-none
2	priomap-tos
3	priomap-dscp
4	priomap-8021p
5	priomap-8021p-inner

.1.3.6.1.4.1.2544.1.12.4.1.27.1.72

cmEthernetTrafficPortIngressCOSPriority

This object is used to specify whether the EthernetTrafficPort
uses the inner-tag or the outer-tag in determining the COS (Class of Service).

CM-COMMON-MIBVlanTagTyper/w

Type Values:

1	inner-vlantag
2	outer-vlantag
3	n2a-priorityMapping
4	mplsLabel
5	vcLabel
6	encapOuterVlanTag

.1.3.6.1.4.1.2544.1.12.4.1.27.1.73

cmEthernetTrafficPortSyncEEnabled

This object allows to specify whether the Ethernet Port
can be enabled/disabled for Synchronous Ethernet. This object
is only applicable for Synchronous Ethernet capable ports.
When enabled, on receive side
-port ca…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.74

cmEthernetTrafficPortQLModeEnabled

This object allows to specify whether the Ethernet Port
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetTrafficPortQLModeEnabled is set to true…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.75

cmEthernetTrafficPortExpectedQL

This object allows to specify the expected QL when the
Ethernet Port is enabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetTrafficPortQLModeEnabled is set to true…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.27.1.76

cmEthernetTrafficPortAssumedQL

This object allows to specify the assumed QL on the
Ethernet Port. This object is only applicable for
Synchronous Ethernet capable ports.
The Assumed QL is only meaningful if the Network Clock Type
(see fsp150cm-sync…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.27.1.77

cmEthernetTrafficPortReceivedQL

This object provides the Received QL value for the Ethernet port.
If the Ethernet port TransmitQL Mode is disabled, then the received
QL value is not applicable.This object is only applicable for
Synchronous Ethernet…

F3-SYNC-MIBSSMQualityLevel

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.27.1.78

cmEthernetTrafficPortTransmitQL

This object provides the Transmitted QL value for the Ethernet port.
If the Ethernet port TransmitQL Mode is disabled, then the received
QL value is not applicable. This object is only applicable for
Synchronous Ethe…

F3-SYNC-MIBSSMQualityLevel

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.27.1.79

cmEthernetTrafficPortPhyType

This object is valid only to XGE card. And the value should be LAN or WAN when
it is XGE card.

XgePhyTyper/w

Type Values:

0	not-applicable
1	lan
2	wan
3	otn

.1.3.6.1.4.1.2544.1.12.4.1.27.1.80

cmEthernetTrafficPortSfpLaserWaveLengthPicometer

This object provide laser wavelength pico value.
For example, laser wavelength is 1510.01,
then cmEthernetTrafficPortSfpLaserWaveLength=1510
and cmTrafficPortSfpLaserWaveLengthPicometer=10.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.27.1.81

cmEthernetTrafficPortRowStatus

The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.27.1.82

cmEthernetTrafficPortSSMRemoteMacAddress

This object allows retrieval of the Remote Mac Address, when
the port is peering using SSM.

SNMPv2-TCMacAddress

Constraints:
range: 1-65535

Description:

.1.3.6.1.4.1.2544.1.12.4.1.27.1.83

cmEthernetTrafficPortInnerVlanLoopbackMask

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.2544.1.12.4.1.27.1.84

cmEthernetTrafficPortInnerVlanLoopback1

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.27.1.85

cmEthernetTrafficPortInnerVlanLoopback2

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.27.1.86

cmEthernetTrafficPortInnerVlanLoopback3

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.27.1.87

cmEthernetTrafficPortLaserWDMChannel

Channel number of WDM tunable XFP setting.

SfpChannelIdentifierr/w

Type Values:

0	not-applicable
1	none
2	frequency-19610
3	frequency-19595
4	frequency-19585
5	frequency-19575
6	frequency-19565
7	frequency-19555
8	frequency-19545
9	frequency-19535
10	frequency-19525
11	frequency-19515
12	frequency-19505
13	frequency-19495
14	frequency-19485
15	frequency-19475
16	frequency-19465
17	frequency-19455
18	frequency-19445
19	frequency-19435
20	frequency-19425
21	frequency-19415
22	frequency-19405
23	frequency-19395
24	frequency-19385
25	frequency-19375
26	frequency-19365
27	frequency-19355
28	frequency-19345
29	frequency-19335
30	frequency-19325
31	frequency-19315
32	frequency-19305
33	frequency-19295
34	frequency-19285
35	frequency-19275
36	frequency-19265
37	frequency-19255
38	frequency-19245
39	frequency-19235
40	frequency-19225
41	frequency-19215
42	frequency-19205
43	frequency-19600
44	frequency-19590
45	frequency-19580
46	frequency-19570
47	frequency-19560
48	frequency-19550
49	frequency-19540
50	frequency-19530
51	frequency-19520
52	frequency-19510
53	frequency-19500
54	frequency-19490
55	frequency-19480
56	frequency-19470
57	frequency-19460
58	frequency-19450
59	frequency-19440
60	frequency-19430
61	frequency-19420
62	frequency-19410
63	frequency-19400
64	frequency-19390
65	frequency-19380
66	frequency-19370
67	frequency-19360
68	frequency-19350
69	frequency-19340
70	frequency-19330
71	frequency-19320
72	frequency-19310
73	frequency-19300
74	frequency-19290
75	frequency-19280
76	frequency-19270
77	frequency-19260
78	frequency-19250
79	frequency-19240
80	frequency-19230
81	frequency-19220
82	frequency-19210
83	frequency-19200
84	frequency-19195
85	frequency-19190
86	frequency-19185
87	frequency-19180
88	frequency-19175
89	frequency-19170
90	frequency-19165
91	frequency-19160
92	frequency-19155
93	frequency-19150
94	frequency-19145
95	frequency-19140
96	frequency-19135
97	frequency-19130
98	frequency-19125

.1.3.6.1.4.1.2544.1.12.4.1.27.1.88

cmEthernetTrafficPortLaserIsTunable

This object means this module whether tunnable.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.89

cmEthernetTrafficPortLaserFrequency

This object describes this module's frequency, and the step is 1GHZ.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.27.1.90

cmEthernetTrafficPortDeiEnabledeprecated

This object describes whether use DEI bit in S-tag to
recognize Drop Eligibility Parameter for ingress S-tag packets or Set
DEI bit for egress S-tag Packets.
This object is still supported by OSA8.1.1

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.91

cmEthernetTrafficPortPcpDEEncType

This object describes the PCP encoding mode for egress packets
and the PCP decoding mode for ingress packets on this port.

PcpDEEncTyper/w

Type Values:

1	enc-none
2	enc-7p1d
3	enc-6p2d
4	enc-5p3d
5	enc-custom

.1.3.6.1.4.1.2544.1.12.4.1.27.1.92

cmEthernetTrafficPortPcpDEPairsAction

This object describes this port pcp de pairs action.

PcpDEPairsActionr/w

Type Values:

0	none
1	apply-pairs

.1.3.6.1.4.1.2544.1.12.4.1.27.1.93

cmEthernetTrafficPortInitiateDiag

This object allows to initiate Etherjack diagnosis on the
Ethernet Traffic Port.

CmEthernetDiagActionr/w

Constraints:
range: 1-65535

Type Values:

0	not-applicable
1	autoneg
2	cable
3	loopback
4	efm-oam-lpbk
5	all

.1.3.6.1.4.1.2544.1.12.4.1.27.1.94

cmEthernetTrafficPortDiagnosePair1Cond

This object provides diagnosis results for the cable Pair 1
on Ethernet Traffic Port.

CmDiagCableCondType

Constraints:
range: 0-256

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.27.1.95

cmEthernetTrafficPortDiagnosePair2Cond

This object provides diagnosis results for the cable Pair 2
on Ethernet Traffic Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.27.1.96

cmEthernetTrafficPortDiagnosePair3Cond

This object provides diagnosis results for the cable Pair 3
on Ethernet Traffic Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.27.1.97

cmEthernetTrafficPortDiagnosePair4Cond

This object provides diagnosis results for the cable Pair 4
on Ethernet Traffic Port.

CmDiagCableCondType

Type Values:

0	not-applicable
1	cableshort
2	cableopen
3	cableimpedance
4	cablenotfound
5	cableok
6	cablefailed
7	cablenotrun

.1.3.6.1.4.1.2544.1.12.4.1.27.1.98

cmEthernetTrafficPortDiagnoseAutoNegCond

This object provides auto negotiation results of the diagnosis
test on Ethernet Traffic Port.

CmDiagAutoNegCondType

Type Values:

0	not-applicable
1	autonegok
2	autonegfailed
3	autonegnotrun

.1.3.6.1.4.1.2544.1.12.4.1.27.1.99

cmEthernetTrafficPortDiagnoseLpbkCond

This object provides port loopback results of the diagnosis
test on Ethernet Traffic Port.

CmDiagLpbkCondType

Type Values:

0	not-applicable
1	lpbkok
2	lpbkfailed
3	lpbknotrun

.1.3.6.1.4.1.2544.1.12.4.1.27.1.100

cmEthernetTrafficPortDiagnoseEfmLpbkCond

This object provides remote EFM loopback results of the diagnosis
test on Ethernet Traffic Port.

CmDiagEfmOamLpbkCondType

Type Values:

0	not-applicable
1	efmlpbkok
2	efmlpbkfailed
3	efmlpbkfailednendNA
4	efmlpbkfailedfendNA
5	efmlpbknotrun

.1.3.6.1.4.1.2544.1.12.4.1.27.1.101

cmEthernetTrafficPortDiagnoseResult

This object provides results of the diagnosis
test in string form on Ethernet Traffic Port.

OctetString

Constraints:
range: 0-512

.1.3.6.1.4.1.2544.1.12.4.1.27.1.102

cmEthernetTrafficPortDiagnoseTestStatus

This object provides the current status of the diagnosis
test on Ethernet Traffic Port.

CmDiagTestStatus

Type Values:

0	not-applicable
1	initial
2	in-progress
3	stopped
4	completed
5	aborted

.1.3.6.1.4.1.2544.1.12.4.1.27.1.103

cmEthernetTrafficPortDiagnoseTestTime

This object provides the time when diagnosis test was last executed.

SNMPv2-TCDateAndTime

Constraints:
range: 0-16

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.4.1.27.1.104

cmEthernetTrafficPortAutoDiagEnabled

This object allows to enable or disable the automatic
Cable Diagnostic tests when the cable is removed from the port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.105

cmEthernetTrafficPortDeleteEntitiesAction

This object allows to delete esa entities relate this port and
Cfm entities relate this port.

TrafficPortDeleteEntitiesActionr/w

Type Values:

1	no-action
2	delete-esa-entities
3	delete-cfm-entities

.1.3.6.1.4.1.2544.1.12.4.1.27.1.106

cmEthernetTrafficPortMaxMpFpNum

This object allows to set the mpflow max fp number, and now only the ports on ethernet10x1GCard,
ethernet1x10GCard, ethernet1x10GHighPerCard, ethernet10x1GHighPerCard support this attribute. for
others, cann't be set an…

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.27.1.107

cmEthernetTrafficPortJdsuLoopbackEnableddeprecated

This object allows to enable or disable jdsu loopback on this port.

Note: This object is deprecated.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.108

cmEthernetTrafficPortJdsuLoopbackVlanIddeprecated

This object allows to set the jdsu loopback vlan.
if status is jdsu-terminal-port-tailend(19) or jdsu-facility-port-tailend(21),
then VID is 0 means not applicable.

Note: This object is deprecated.

CM-COMMON-MIBVlanId

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.4.1.27.1.109

cmEthernetTrafficPortIngressPopPriorityVidEnabled

This object defines the Ingress PopPriorityVid enable or disable of the port.
If it is enabled, then incoming priority tagged
packet's VID is swapped to Priority VLAN ID.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.27.1.110

cmEthernetTrafficPortRxDeiAction

This object allows to specify
the Receive DEI Action.

RxDeiActionr/w

Type Values:

1	ignore
2	use

.1.3.6.1.4.1.2544.1.12.4.1.27.1.111

cmEthernetTrafficPortTxDeiAction

This object allows to specify
the Transmit DEI Action.

TxDeiActionr/w

Type Values:

1	setToZero
2	markColor
3	noChange

.1.3.6.1.4.1.2544.1.12.4.1.27.1.112

cmEthernetTrafficPortRxDeiOuterTagType

This object allows to specify
the Receive DEI Outer Tag Type.

DeiOuterTagTyper/w

Type Values:

1	stag
2	ctagOrStag

.1.3.6.1.4.1.2544.1.12.4.1.27.1.113

cmEthernetTrafficPortTxDeiOuterTagType

This object allows to specify
the Transmit DEI Outer Tag Type.

DeiOuterTagTyper/w

Type Values:

1	stag
2	ctagOrStag

.1.3.6.1.4.1.2544.1.12.4.1.27.1.114

cmElineFlowTable

table

.1.3.6.1.4.1.2544.1.12.4.1.28 · 1 row entry · 9 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmElineFlowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmElineFlowTable'

A list of entries corresponding to Flows 
for configuration purposes.

cmElineFlowEntry row .1.3.6.1.4.1.2544.1.12.4.1.28.1

A conceptual row in the cmElineFlowTable. These entries represent
an Flow.

Indexes

No indexes recorded

Column Syntax OID

cmElineFlowIndex

The integer index value corresponding to an Flow.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.28.1.1

cmElineFlowCircuitName

This object allows SNMP management entities to provide a
circuit identifier with the Flow.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.28.1.2

cmElineFlowAdminState

This object represents the Administrative State of the Flow.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.28.1.3

cmElineFlowOperationalState

This object represents the Operational State of the Flow.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.28.1.4

cmElineFlowSecondaryState

This object represents the Secondary State of the Flow.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.28.1.5

cmElineFlowFP1

This object allows SNMP management entities to provide a
flowpoint with the Flow.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.28.1.6

cmElineFlowFP2

This object allows SNMP management entities to provide another
flowpoint with the Flow.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.28.1.7

cmElineFlowStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.28.1.8

cmElineFlowRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.28.1.9

cmFlowPointTable

table

.1.3.6.1.4.1.2544.1.12.4.1.29 · 1 row entry · 44 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmFlowPointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmFlowPointTable'

A list of entries corresponding to FlowPoint
for configuration purposes.

cmFlowPointEntry row .1.3.6.1.4.1.2544.1.12.4.1.29.1

A conceptual row in the cmFlowPointTable. These entries represent
an FlowPoint.
If the flowpoint attached to a lag, the slotIndex should
be 255(255 is used to identify the flowpoint belongs to lag),
and the cmEthernet…

Indexes

No indexes recorded

Column Syntax OID

cmFlowPointIndex

The integer index value corresponding to an FlowPoint.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.4.1.29.1.1

cmFlowPointCircuitName

This object allows SNMP management entities to provide a
circuit identifier with the FlowPoint.

OctetStringr/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.4.1.29.1.2

cmFlowPointAdminState

This object represents the Administrative State of the FlowPoint.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.29.1.3

cmFlowPointOperationalState

This object represents the Operational State of the FlowPoint.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.29.1.4

cmFlowPointSecondaryState

This object represents the Secondary State of the FlowPoint.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.29.1.5

cmFlowPointAssociatedFlowId

This object provides the association of an Flow with an FlowPoint.

SNMPv2-TCVariablePointer

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.6

cmFlowPointIngressMultiCOS

This object allows specification of ingress multiple COS (Class of Service) FlowPoint.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.7

cmFlowPointIngressCOS

This object allows specification of ingress COS (Class of Service) FlowPoint.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.29.1.8

cmFlowPointIngressVlanMemberList

It allows specification of VLAN members of the FlowPoint.
VLAN members are comma separated, of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* or X (vlan X with all p…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.29.1.9

cmFlowPointVlanMemberAction

This object allows to add or remove the VLAN members specified by
cmFlowPointVlanMemberActionVlan object. SNMP manager must first
configure the VLAN member to be added/removed in the object
cmFlowPointVlanMemberActionV…

FlowVlanActionTyper/w

Type Values:

1	no-action
2	add-vlan
3	remove-vlan

.1.3.6.1.4.1.2544.1.12.4.1.29.1.10

cmFlowPointVlanMemberActionVlan

This object allows adding/removing VLAN members
to a flowpoint.
VLAN member is of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* (vlan X with all priorities),
*-Y (…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.29.1.11

cmFlowPointIngressUntaggedFrameEnabled

This object allows to specify whether or not the flowpoint
supports untagged frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.12

cmFlowPointCTagControl

This object allows specification of the tag management
operation on the C-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
the VLAN Id (cmFlowPointCTagVlanId) and pr…

FlowTagControlr/w

Constraints:
range: 1-65535

Type Values:

1	none
2	push
3	swapvid
4	pushvid
5	pop
6	pushisid

.1.3.6.1.4.1.2544.1.12.4.1.29.1.13

cmFlowPointCTagVlanId

This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of cmFlowPointIngressCTagControl.
It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid'
control types.

CM-COMMON-MIBVlanIdr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2544.1.12.4.1.29.1.14

cmFlowPointCTagVlanPriority

This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of cmFlowPointIngressCTagControl.
It is applicable for 'push' and 'swaptag' control types.

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.29.1.15

cmFlowPointSTagControl

This object allows specification of the tag management
operation on the S-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
the VLAN Id (cmFlowPointSTagVlanId) and pr…

FlowTagControlr/w

Type Values:

1	none
2	push
3	swapvid
4	pushvid
5	pop
6	pushisid

.1.3.6.1.4.1.2544.1.12.4.1.29.1.16

cmFlowPointSTagVlanId

This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of cmFlowPointIngressSTagControl.
It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid'
control types.

CM-COMMON-MIBVlanIdr/w

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.4.1.29.1.17

cmFlowPointSTagVlanPriority

This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of cmFlowPointIngressSTagControl.
It is applicable for 'push' and 'swaptag' control types.

CM-COMMON-MIBVlanPriorityr/w

Constraints:
range: 0-512

.1.3.6.1.4.1.2544.1.12.4.1.29.1.18

cmFlowPointEgressOuterTagPrioMapEnabled

This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag.
When Enabled,it indicates that the operation specified in the EgressPrioMapTable would be
applied to Flow for specified COS.…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.19

cmFlowPointColorMarkingSupported

This object defines the egress color marking. If set to Enabled, the DEI bit of S-tag pushed
will be remarked according the meter result. If set to Disabled, the DEI bit is forced to 0.

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-16

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.20

cmFlowPointAssociatedAclProfile

This object provides the association of an Flow with an ACL profile.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.21

cmFlowPointSESFramesLossThresholdRatio

This object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the flowpoint.
This functionality is applicable if the flowpoint is monitored
using the Y.1731 ESA fu…

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.2544.1.12.4.1.29.1.22

cmFlowPointStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.29.1.23

cmFlowPointRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.29.1.24

cmFlowPointDefaultMemberEnabled

defaultMemberEnabled with enabled means that on this FP,
the membership is all the tag packets without match any
other membership associated to the port. Untagged means
untagged flow. Default only care tagged flow.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.25

cmFlowPointMcastRateLimitEnabled

Whether multicast packets need be limited per FP.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.26

cmFlowPointMcastRateLimitSpeedLo

The rate limiting for multicast packets per FP
When cmFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 1-64

.1.3.6.1.4.1.2544.1.12.4.1.29.1.27

cmFlowPointMcastRateLimitSpeedHi

The rate limiting for multicast packets per FP
When cmFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2544.1.12.4.1.29.1.28

cmFlowPointBcastRateLimitEnabled

Whether broadcast packets need be limited per FP.

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-7

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.29

cmFlowPointBcastRateLimitSpeedLo

The rate limiting for broadcast packets per FP
When cmFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.29.1.30

cmFlowPointBcastRateLimitSpeedHi

The rate limiting for broadcast packets per FP
When cmFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.29.1.31

cmFlowPointSplitHorizonGroupOID

Specifies the Split-Horizon Group EID. If there is no SHG, the value is none.

SNMPv2-TCVariablePointerr/w

Constraints:
range: 1-8

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.32

cmFlowPointLoopAvoidance

EID of this associated Loop Avoidance protocol entity.
A value of NONE indicates there is no loop avoidance protocol.
Currently ERP EID is filled when ELAN service is created.

SNMPv2-TCVariablePointerr/w

Constraints:
range: 0-7

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.33

cmFlowPointHierarchicalCosEnabled

Enable or Disable Hierarchical COS shaping (flow shaping).

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.34

cmFlowPointWfqQid

This attribute description the WFQ Qid.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.29.1.35

cmFlowPointWfqOutPriority

This attribute description the WFQ out priority.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.29.1.36

cmFlowPointMaximumBWLo

This attribute description the flow point maximum bandwidth.

This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.29.1.37

cmFlowPointMaximumBWHi

This attribute description the flow point maximum bandwidth.

This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.4.1.29.1.38

cmFlowPointGuaranteedBWLo

This attribute description the flow point guaranteed bandwidth.

This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2544.1.12.4.1.29.1.39

cmFlowPointGuaranteedBWHi

This attribute description the flow point guaranteed bandwidth.

This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.29.1.40

cmFlowPointRefPrioMapProfile

This object allows to set priority map profile.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.41

cmFlowPointMcastAndBcastRateLimitEnabled

Whether multicast packets and broadcast packets need be limited per FP.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.29.1.42

cmFlowPointMcastAndBcastRateLimitSpeedLo

The rate limiting for multicast packets and broadcast packets per FP
When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represen…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.29.1.43

cmFlowPointMcastAndBcastRateLimitSpeedHi

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.29.1.44

cmOAMFlowPointTable

table

.1.3.6.1.4.1.2544.1.12.4.1.30 · 1 row entry · 12 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmOAMFlowPointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmOAMFlowPointTable'

A list of entries corresponding to OAMFlowPoint
for configuration purposes.

cmOAMFlowPointEntry row .1.3.6.1.4.1.2544.1.12.4.1.30.1

A conceptual row in the cmOAMFlowPointTable. These entries represent
an FlowPoint.
If the oam flowpoint attached to a lag, the slotIndex should
be 255(255 is used to identify the oam flowpoint belongs to lag),
and the…

Indexes

No indexes recorded

Column Syntax OID

cmOAMFlowPointIndex

The integer index value corresponding to an OAMFlowPoint.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.30.1.1

cmOAMFlowPointCircuitName

This object allows SNMP management entities to provide a
circuit identifier with the OAMFlowPoint.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.30.1.2

cmOAMFlowPointAdminState

This object represents the Administrative State of the OAMFlowPoint.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.30.1.3

cmOAMFlowPointOperationalState

This object represents the Operational State of the OAMFlowPoint.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.30.1.4

cmOAMFlowPointSecondaryState

This object represents the Secondary State of the OAMFlowPoint.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.30.1.5

cmOAMFlowPointIngressVlanMemberList

It allows specification of VLAN members of the OAMFlowPoint.
VLAN members are comma separated, of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* or X (vlan X with al…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.30.1.6

cmOAMFlowPointVlanMemberAction

This object allows to add or remove the VLAN members specified by
cmOAMFlowPointVlanMemberActionVlan object. SNMP manager must first
configure the VLAN member to be added/removed in the object
cmOAMFlowPointVlanMemberA…

FlowVlanActionTyper/w

Type Values:

1	no-action
2	add-vlan
3	remove-vlan

.1.3.6.1.4.1.2544.1.12.4.1.30.1.7

cmOAMFlowPointVlanMemberActionVlan

This object allows adding/removing VLAN members
to a oam flowpoint.
VLAN member is of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* (vlan X wit…

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.30.1.8

cmOAMFlowPointIngressUntaggedFrameSupported

This object allows to specify whether or not the OAMFlowPoint
supports untagged frame.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.30.1.9

cmOAMFlowPointSESFramesLossThresholdRatio

This object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the oam flowpoint.
This functionality is applicable if the oam flowpoint is monitored
using the Y.173…

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.30.1.10

cmOAMFlowPointStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.30.1.11

cmOAMFlowPointRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.30.1.12

cmIngressPrioMapTable

table

.1.3.6.1.4.1.2544.1.12.4.1.31 · 1 row entry · 3 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmIngressPrioMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmIngressPrioMapTable'

A list of entries corresponding to Ingress Priority Mapping 
for configuration purposes.

cmIngressPrioMapEntry row .1.3.6.1.4.1.2544.1.12.4.1.31.1

A conceptual row in the cmIngressPrioMapTable.

Indexes

No indexes recorded

Column	Syntax	OID
cmIngressPrioMapIndex The integer index value corresponding to a priority value based on the cmEthernetTrafficPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.	Integer32	`.1.3.6.1.4.1.2544.1.12.4.1.31.1.1`
cmIngressPrioMapInPriority The integer index value corresponding to a priority value based on the cmEthernetTrafficPortIngressPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.	Integer32r/w	`.1.3.6.1.4.1.2544.1.12.4.1.31.1.2`
cmIngressPrioMapCOS This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.	Integer32r/w	`.1.3.6.1.4.1.2544.1.12.4.1.31.1.3`

cmEgressPrioMapTable

table

.1.3.6.1.4.1.2544.1.12.4.1.32 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEgressPrioMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEgressPrioMapTable'

A list of entries corresponding to Egress Priority Mapping 
for configuration purposes.

cmEgressPrioMapEntry row .1.3.6.1.4.1.2544.1.12.4.1.32.1

A conceptual row in the cmEgressPrioMapTable.

Indexes

No indexes recorded

Column Syntax OID

cmEgressCOSIndex

The integer index used to uniquely identify
this Egress Priority Map Entry

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.32.1.1

cmEgressCOS

This allows specification of the COS Priority, i.e.
this helps in determining the appropriate COS Policer for
the Flow.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.32.1.2

cmEgressOuterTagCtrl

This object defines the behavior of the Priority portion of the frame transmit out.
If NONE is selected, the outgoing priority bits are left unchanged.
If SWAP is selected, the priority bits are changed by the value s…

PrioMapControlTyper/w

Type Values:

1	none
2	swap

.1.3.6.1.4.1.2544.1.12.4.1.32.1.3

cmEgressOuterTagPriority

This object defines the new priority bits to be used,
it is available only if Outer-Tag PRIOCTL is set to SWAP.

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.32.1.4

cmPortCpdProfileTable

table

.1.3.6.1.4.1.2544.1.12.4.1.33 · 1 row entry · 50 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmPortCpdProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmPortCpdProfileTable'

A list of entries corresponding to System 
Control Protocol Disposition V3 profile.

cmPortCpdProfileEntry row .1.3.6.1.4.1.2544.1.12.4.1.33.1

A conceptual row in the cmPortCpdProfileTable.
These entries represent a Control Protocol Disposition
of a port filtering criteria of the System.

Indexes

No indexes recorded

Column Syntax OID

cmPortCpdProfileIndex

Unique Index value to access the CPD profile row.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.33.1.1

cmPortCpdProfileName

This object describes the alias of the cpd V3 profile entry.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.33.1.2

cmPortCpdProfileCiscoGroupDispTypedeprecated

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.3

cmPortCpdProfileIslDispType

Control Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.4

cmPortCpdProfilePagpDispType

Control Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.5

cmPortCpdProfileUdldDispType

Control Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.6

cmPortCpdProfileCdpDispType

Control Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.7

cmPortCpdProfileVtpDispType

Control Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.8

cmPortCpdProfileDtpDispType

Control Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.9

cmPortCpdProfilePvstpPlusDispType

Control Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.10

cmPortCpdProfileUplinkFastDispType

Control Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.11

cmPortCpdProfileVlanBridgeDispType

Control Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.12

cmPortCpdProfileL2PTDispType

Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.13

cmPortCpdProfileBridgeGroupDispTypedeprecated

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.14

cmPortCpdProfileBPDUDispType

Control Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.15

cmPortCpdProfilePauseDispType

Control Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.16

cmPortCpdProfileLACPDispType

Control Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.17

cmPortCpdProfileLACPMarkerDispType

Control Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.18

cmPortCpdProfileEfmOamDispType

Control Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).

CmControlProtocolDispTyper/w

Constraints:
range: 1-65535

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.19

cmPortCpdProfileSSMDispType

Control Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).

CmControlProtocolDispTyper/w

Constraints:
range: 0-64

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.20

cmPortCpdProfilePortAuthenDispType

Control Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.21

cmPortCpdProfileBridgeReservedDispTypedeprecated

Deprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.22

cmPortCpdProfileLANBridgesDispType

Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.23

cmPortCpdProfileGARPGroupDispTypedeprecated

Deprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.24

cmPortCpdProfileGMRPDispType

Control Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.25

cmPortCpdProfileGVRPDispType

Control Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:22).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.26

cmPortCpdProfileGARPDispType

Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.27

cmPortCpdProfileLldpDispTypedeprecated

Deprecated - each LLDP MAC protocol has its own disposition.
Control Protocol Disposition for LLDP.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.28

cmPortCpdProfileStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.33.1.29

cmPortCpdProfileRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.33.1.30

cmPortCpdProfileMac00DispType

MAC Address 01:80:C2:00:00:00 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.31

cmPortCpdProfileMac01DispType

MAC Address 01:80:C2:00:00:01 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.32

cmPortCpdProfileMac02DispType

MAC Address 01:80:C2:00:00:02 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.33

cmPortCpdProfileMac03DispType

MAC Address 01:80:C2:00:00:03 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.34

cmPortCpdProfileMac04DispType

MAC Address 01:80:C2:00:00:04 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.35

cmPortCpdProfileMac05DispType

MAC Address 01:80:C2:00:00:05 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.36

cmPortCpdProfileMac06DispType

MAC Address 01:80:C2:00:00:06 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.37

cmPortCpdProfileMac07DispType

MAC Address 01:80:C2:00:00:07 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.38

cmPortCpdProfileMac08DispType

MAC Address 01:80:C2:00:00:08 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.39

cmPortCpdProfileMac09DispType

MAC Address 01:80:C2:00:00:09 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.40

cmPortCpdProfileMac0ADispType

MAC Address 01:80:C2:00:00:0A Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.41

cmPortCpdProfileMac0BDispType

MAC Address 01:80:C2:00:00:0B Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.42

cmPortCpdProfileMac0CDispType

MAC Address 01:80:C2:00:00:0C Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.43

cmPortCpdProfileMac0DDispType

MAC Address 01:80:C2:00:00:0D Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.44

cmPortCpdProfileMac0EDispType

MAC Address 01:80:C2:00:00:0E Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.45

cmPortCpdProfileMac0FDispType

MAC Address 01:80:C2:00:00:0F Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.46

cmPortCpdProfileNearestLLDPDispType

The nearest lldp Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.47

cmPortCpdProfileNonTpmrLLDPDispType

The non tp mr lldp Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.48

cmPortCpdProfileCustomerLLDPDispType

The customer lldp Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.49

cmPortCpdProfileELMIDispType

The ELMI Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.33.1.50

cmFlowPointCpdProfileTable

table

.1.3.6.1.4.1.2544.1.12.4.1.34 · 1 row entry · 50 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmFlowPointCpdProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmFlowPointCpdProfileTable'

A list of entries corresponding to System 
Control Protocol Disposition V3 profile.

cmFlowPointCpdProfileEntry row .1.3.6.1.4.1.2544.1.12.4.1.34.1

A conceptual row in the cmFlowPointCpdProfileTable.
These entries represent a Control Protocol Disposition
of a flow point filtering criteria of the System.

Indexes

No indexes recorded

Column Syntax OID

cmFlowPointCpdProfileIndex

Unique Index value to access the CPD profile row.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.34.1.1

cmFlowPointCpdProfileName

This object describes the alias of the cpd V3 profile entry.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.34.1.2

cmFlowPointCpdProfileCiscoGroupDispTypedeprecated

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.3

cmFlowPointCpdProfileIslDispType

Control Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.4

cmFlowPointCpdProfilePagpDispType

Control Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.5

cmFlowPointCpdProfileUdldDispType

Control Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.6

cmFlowPointCpdProfileCdpDispType

Control Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.7

cmFlowPointCpdProfileVtpDispType

Control Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.8

cmFlowPointCpdProfileDtpDispType

Control Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.9

cmFlowPointCpdProfilePvstpPlusDispType

Control Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.10

cmFlowPointCpdProfileUplinkFastDispType

Control Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.11

cmFlowPointCpdProfileVlanBridgeDispType

Control Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.12

cmFlowPointCpdProfileL2PTDispType

Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.13

cmFlowPointCpdProfileBridgeGroupDispTypedeprecated

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.14

cmFlowPointCpdProfileBPDUDispType

Control Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.15

cmFlowPointCpdProfilePauseDispType

Control Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.16

cmFlowPointCpdProfileLACPDispType

Control Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.17

cmFlowPointCpdProfileLACPMarkerDispType

Control Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.18

cmFlowPointCpdProfileEfmOamDispType

Control Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).

CmControlProtocolDispTyper/w

Constraints:
range: 1-65535

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.19

cmFlowPointCpdProfileSSMDispType

Control Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.20

cmFlowPointCpdProfilePortAuthenDispType

Control Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.21

cmFlowPointCpdProfileBridgeReservedDispTypedeprecated

Deprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.22

cmFlowPointCpdProfileLANBridgesDispType

Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).

CmControlProtocolDispTyper/w

Constraints:
range: 1-65535

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.23

cmFlowPointCpdProfileGARPGroupDispTypedeprecated

Deprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.24

cmFlowPointCpdProfileGMRPDispType

Control Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.25

cmFlowPointCpdProfileGVRPDispType

Control Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:22).

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.26

cmFlowPointCpdProfileGARPDispType

Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.

CmControlProtocolDispTyper/w

Constraints:
range: 1-65535

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.27

cmFlowPointCpdProfileLldpDispTypedeprecated

Deprecated - each LLDP MAC protocol has its own disposition.
Control Protocol Disposition for LLDP.

CmControlProtocolDispTyper/w

Constraints:
range: 0-64

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.28

cmFlowPointCpdProfileStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.34.1.29

cmFlowPointCpdProfileRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.34.1.30

cmFlowPointCpdProfileMac00DispType

MAC Address 01:80:C2:00:00:00 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.31

cmFlowPointCpdProfileMac01DispType

MAC Address 01:80:C2:00:00:01 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.32

cmFlowPointCpdProfileMac02DispType

MAC Address 01:80:C2:00:00:02 Disposition type.

CmControlProtocolDispTyper/w

Constraints:
range: 1-65535

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.33

cmFlowPointCpdProfileMac03DispType

MAC Address 01:80:C2:00:00:03 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.34

cmFlowPointCpdProfileMac04DispType

MAC Address 01:80:C2:00:00:04 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.35

cmFlowPointCpdProfileMac05DispType

MAC Address 01:80:C2:00:00:05 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.36

cmFlowPointCpdProfileMac06DispType

MAC Address 01:80:C2:00:00:06 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.37

cmFlowPointCpdProfileMac07DispType

MAC Address 01:80:C2:00:00:07 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.38

cmFlowPointCpdProfileMac08DispType

MAC Address 01:80:C2:00:00:08 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.39

cmFlowPointCpdProfileMac09DispType

MAC Address 01:80:C2:00:00:09 Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.40

cmFlowPointCpdProfileMac0ADispType

MAC Address 01:80:C2:00:00:0A Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.41

cmFlowPointCpdProfileMac0BDispType

MAC Address 01:80:C2:00:00:0B Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.42

cmFlowPointCpdProfileMac0CDispType

MAC Address 01:80:C2:00:00:0C Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.43

cmFlowPointCpdProfileMac0DDispType

MAC Address 01:80:C2:00:00:0D Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.44

cmFlowPointCpdProfileMac0EDispType

MAC Address 01:80:C2:00:00:0E Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.45

cmFlowPointCpdProfileMac0FDispType

MAC Address 01:80:C2:00:00:0F Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.46

cmFlowPointCpdProfileNearestLLDPDispType

The nearest lldp Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.47

cmFlowPointCpdProfileNonTpmrLLDPDispType

The non tp mr lldp Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.48

cmFlowPointCpdProfileCustomerLLDPDispType

The customer lldp Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.49

cmFlowPointCpdProfileELMIDispType

The ELMI Disposition type.

CmControlProtocolDispTyper/w

Type Values:

0	not-applicable
1	discard
2	peer
3	pass-thru
4	use-group-setting
5	not-active
6	use-port-setting
7	pass-thru-l2pt
8	useMacSetting

.1.3.6.1.4.1.2544.1.12.4.1.34.1.50

cmEthernetTrafficPortCpdTable

table

.1.3.6.1.4.1.2544.1.12.4.1.35 · 1 row entry · 2 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetTrafficPortCpdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetTrafficPortCpdTable'

A list of entries corresponding to Ethernet Port 
CPD for configuration purposes.

cmEthernetTrafficPortCpdEntry row .1.3.6.1.4.1.2544.1.12.4.1.35.1

A conceptual row in the cmEthernetTrafficPortCpdTable.

Indexes

No indexes recorded

Column	Syntax	OID
cmEthernetTrafficPortCpdIndex An arbitrary integer index value used to uniquely identify this CPD Service Entry.	Integer32	`.1.3.6.1.4.1.2544.1.12.4.1.35.1.1`
cmEthernetTrafficPortAssociatedCpdProfile An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.	SNMPv2-TCVariablePointerr/w Constraints: `range: 0-65535` Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	`.1.3.6.1.4.1.2544.1.12.4.1.35.1.2`

cmEthernetFlowPointCpdTable

table

.1.3.6.1.4.1.2544.1.12.4.1.36 · 1 row entry · 2 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetFlowPointCpdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetFlowPointCpdTable'

A list of entries corresponding to Ethernet Flow Point 
CPD for configuration purposes.

cmEthernetFlowPointCpdEntry row .1.3.6.1.4.1.2544.1.12.4.1.36.1

A conceptual row in the cmEthernetFlowPointCpdTable.

Indexes

No indexes recorded

Column	Syntax	OID
cmEthernetFlowPointCpdIndex An arbitrary integer index value used to uniquely identify this CPD Service Entry.	Integer32	`.1.3.6.1.4.1.2544.1.12.4.1.36.1.1`
cmEthernetFlowPointAssociatedCpdProfile An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	`.1.3.6.1.4.1.2544.1.12.4.1.36.1.2`

cmTrafficAclProfileTable

table

.1.3.6.1.4.1.2544.1.12.4.1.37 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmTrafficAclProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmTrafficAclProfileTable'

A list of entries corresponding to the Traffic Profile Rules Entry. 
It provides upto 4000 Traffic ACL Rules to be configured.

cmTrafficAclProfileEntry row .1.3.6.1.4.1.2544.1.12.4.1.37.1

An entry containing information applicable to a system ACL Profile that can be configured.

Indexes

No indexes recorded

Column Syntax OID

cmTrafficAclProfileIndex

An arbitrary integer index value used to uniquely identify
Traffic ACL profile entry.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.37.1.1

cmTrafficAclProfileName

This object describes the alias of the Acl profile entry.

OctetStringr/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.4.1.37.1.2

cmTrafficAclProfileStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.37.1.3

cmTrafficAclProfileRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.37.1.4

cmTrafficAclRulesTable

table

.1.3.6.1.4.1.2544.1.12.4.1.38 · 1 row entry · 35 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmTrafficAclRulesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmTrafficAclRulesTable'

A list of entries corresponding to the Traffic ACL Rules Entry.

cmTrafficAclRulesEntry row .1.3.6.1.4.1.2544.1.12.4.1.38.1

An entry containing information applicable to a system ACL Rules that can be configured.

Indexes

No indexes recorded

Column Syntax OID

cmTrafficAclRulesIndex

An arbitrary integer index value used to uniquely identify
Traffic ACL profile entry. The manager may not assume any
particular semantics or meaning to this index, except that
it identifies a logical row in the table.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.38.1.1

cmTrafficAclFilterAction

Currently, 'permit' and 'deny' are supported.

CM-COMMON-MIBCmTrafficAclFilterActionTyper/w

Type Values:

1	permit
2	deny

.1.3.6.1.4.1.2544.1.12.4.1.38.1.2

cmTrafficAclFilterType

This object describes the Acl filter type.

CM-COMMON-MIBCmTrafficAclFilterTyper/w

Type Values:

1	mac
2	ipv4
3	ipv6

.1.3.6.1.4.1.2544.1.12.4.1.38.1.3

cmTrafficAclEnabled

This object enables/disables the Acl entity.

SNMPv2-TCTruthValuer/w

Constraints:
range: 1-65535

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.4

cmTrafficAclSrcMacAddr

The source mac address of Acl entry.

SNMPv2-TCMacAddressr/w

Constraints:
range: 0-64

Description:

.1.3.6.1.4.1.2544.1.12.4.1.38.1.5

cmTrafficAclSrcMacAddrEnabled

This object enables/disables source MAC address of Acl entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.6

cmTrafficAclDstMacAddr

The destination MAC address of Acl entry.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2544.1.12.4.1.38.1.7

cmTrafficAclDstMacAddrEnabled

This object enables/disables destination MAC address of Acl entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.8

cmTrafficAclSrcIpFilterEnabled

This object enable/disable Source IPV4 or IPV6 address filter criteria.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.9

cmTrafficAclDstIpFilterEnabled

This object enable/disable Destination IPV4 or IPV6 address filter criteria.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.10

cmTrafficAclSrcIpV4Addr

The source IP address of Acl entry.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.38.1.11

cmTrafficAclSrcIpV4AddrMask

The source IP mask of Acl entry.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.38.1.12

cmTrafficAclDstIpV4Addr

The destination IP address of Acl entry.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.38.1.13

cmTrafficAclDstIpV4AddrMask

The destination IP mask of Acl entry.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.38.1.14

cmTrafficAclSrcIpV6Addr

The source IPV6 address of Acl entry.

IPV6-TCIpv6Addressr/w

Type Constraints:
range: 16

.1.3.6.1.4.1.2544.1.12.4.1.38.1.15

cmTrafficAclSrcIpV6AddrMask

The source IPV6 mask of Acl entry.

IPV6-TCIpv6Addressr/w

Type Constraints:
range: 16

.1.3.6.1.4.1.2544.1.12.4.1.38.1.16

cmTrafficAclDstIpV6Addr

The destination IPV6 address of Acl entry.

IPV6-TCIpv6Addressr/w

Type Constraints:
range: 16

.1.3.6.1.4.1.2544.1.12.4.1.38.1.17

cmTrafficAclDstIpV6AddrMask

The destination IPV6 mask of Acl entry.

IPV6-TCIpv6Addressr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.2544.1.12.4.1.38.1.18

cmTrafficAclTcpUdpSrcPortNum

This object describes TCP/UDP minimum source port number of Acl entry.

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2544.1.12.4.1.38.1.19

cmTrafficAclTcpUdpSrcPortMask

This object describes TCP/UDP maximum source port number of Acl entry.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.38.1.20

cmTrafficAclTcpUdpSrcPortEnabled

This object enables/disables TCP/UDP source port of Acl entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.21

cmTrafficAclTcpUdpDstPortNum

This object describes TCP/UDP minimum destination port number of Acl entry.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.38.1.22

cmTrafficAclTcpUdpDstPortMask

This object describes TCP/UDP maximum destination port number of Acl entry.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.38.1.23

cmTrafficAclTcpUdpDstPortEnabled

This object enables/disables TCP/UDP destination port of Acl entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.24

cmTrafficAclIpQosType

This object describes QosType Acl entry.

CM-COMMON-MIBCmTrafficACLPriorityTyper/w

Type Values:

0	notApplicable
1	acl-tos
2	acl-dscp

.1.3.6.1.4.1.2544.1.12.4.1.38.1.25

cmTrafficAclIpQosValue

This object describes QOS value of Acl entry.

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.2544.1.12.4.1.38.1.26

cmTrafficAclIpQosTypeEnabled

This object enables/disables qos type of acl entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.27

cmTrafficAclVlanId

This object describes the vlan Id of Acl entry.

CM-COMMON-MIBVlanIdr/w

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.2544.1.12.4.1.38.1.28

cmTrafficAclVlanIdEnabled

This object enables/disables Vlan Id of Acl entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.29

cmTrafficAclVlanPriority

This object describes the Vlan Priority of Acl entry.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.38.1.30

cmTrafficAclVlanPriorityEnabled

This object enables/disables Vlan Priority of Acl entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.31

cmTrafficAclProtocolType

This object describes protocol type of Acl entry.

CM-COMMON-MIBCmTrafficAclProtocolTyper/w

Type Values:

0	notApplicable
1	tcp
2	udp

.1.3.6.1.4.1.2544.1.12.4.1.38.1.32

cmTrafficAclProtocolTypeEnabled

This object enables/disables protocol type of Acl entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.38.1.33

cmTrafficAclStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.38.1.34

cmTrafficAclRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.38.1.35

cmQosPolicerProfileTable

table

.1.3.6.1.4.1.2544.1.12.4.1.39 · 1 row entry · 12 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmQosPolicerProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmQosPolicerProfileTable'

A list of entries corresponding to Quality of Service 
Policer for configuration purposes.

cmQosPolicerProfileEntry row .1.3.6.1.4.1.2544.1.12.4.1.39.1

A conceptual row in the cmQosPolicerProfileTable.
These entries represent a Quality of Service Policer.

Indexes

No indexes recorded

Column Syntax OID

cmQosPolicerProfileIndex

This object defines the Policer profile ID. Up to 1000 profiles can be specified per system.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.39.1.1

cmQosPolicerProfileName

This object defines the alias for this profile

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.39.1.2

cmQosPolicerProfileCIRLo

This object allows specification of the Commited Information
Rate(CIR) on Policer Profile. This represents the lower 32 bits of the
CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.39.1.3

cmQosPolicerProfileCIRHi

This object allows specification of the Commited Information
Rate(CIR) on Policer Profile. This represents the upper 32 bits of the
CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.39.1.4

cmQosPolicerProfileEIRLo

This object allows specification of the Excess Information
Rate(EIR) on the Policer Profile. This represents the lower 32 bits
of the EIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.39.1.5

cmQosPolicerProfileEIRHi

This object allows specification of the Excess Information
Rate(EIR) on the Policer Profile. This represents the upper 32 bits
of the EIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.39.1.6

cmQosPolicerProfileCBS

This object allows specification of the Commited Burst Size
(CBS) on Policer Profile.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.39.1.7

cmQosPolicerProfileEBS

This object allows specification of the Excess Burst Size
(EBS) on the Policer Profile.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.39.1.8

cmQosPolicerProfileColorMode

This object allows specification of Policer Color Mode as
'color-aware' or 'color-blind'.

PolicerColorModer/w

Constraints:
range: 64-9600

Type Values:

1	color-aware
2	color-blind

.1.3.6.1.4.1.2544.1.12.4.1.39.1.9

cmQosPolicerProfileCouplingFlag

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.39.1.10

cmQosPolicerProfileStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.39.1.11

cmQosPolicerProfileRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.39.1.12

cmQosQueueProfileTable

table

.1.3.6.1.4.1.2544.1.12.4.1.40 · 1 row entry · 6 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmQosQueueProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmQosQueueProfileTable'

A list of entries corresponding to Quality of Service 
Queue for configuration purposes.

cmQosQueueProfileEntry row .1.3.6.1.4.1.2544.1.12.4.1.40.1

A conceptual row in the cmQosQueueProfileTable.
These entries represent a Quality of Service Queue.

Indexes

No indexes recorded

Column Syntax OID

cmQosQueueProfileIndex

This object defines the Queue profile ID. Up to 64 profiles can be specified per system.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.40.1.1

cmQosQueueProfileName

This object defines the alias for this profile

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.40.1.2

cmQosQueueProfileBufferSize

This object defines the buffer size of the selected queues.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.40.1.3

cmQosQueueProfileREDEnabled

This object defines whether the WRED is enabled as congestion algorithm or not.
If disabled, then the following RED parameters (cmQueueProfileWREDDp0MinTh,
cmQueueProfileWREDDp0MaxTh and cmQueueProfileWREDDp0MaxProb) m…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.40.1.4

cmQosQueueProfileStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.40.1.5

cmQosQueueProfileRowStatus

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-8

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.40.1.6

cmQosPolicerV2Table

table

.1.3.6.1.4.1.2544.1.12.4.1.41 · 1 row entry · 9 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmQosPolicerV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmQosPolicerV2Table'

A list of entries corresponding to Quality of Service 
Policer for configuration purposes.

cmQosPolicerV2Entry row .1.3.6.1.4.1.2544.1.12.4.1.41.1

A conceptual row in the cmQosPolicerV2Table.
These entries represent a Quality of Service Policer.

Indexes

No indexes recorded

Column Syntax OID

cmQosPolicerV2Index

The Policer Index that represents the COS level. Index 1
represents COS 0; Index 2 represents COS 1 and so on.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.41.1.1

cmQosPolicerV2AdminState

This object represents the Administrative State of
the QOS Policer.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.41.1.2

cmQosPolicerV2OperationalState

This object represents the Operational State of the QOS Policer.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.41.1.3

cmQosPolicerV2SecondaryState

This object represents the Secondary State of the QOS Policer.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.41.1.4

cmQosPolicerV2ColorMarkingEnabled

This object indicates the colorMarking state of the QOS Policer.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.41.1.5

cmQosPolicerV2AssociatedProfile

This object define the queue profile ID to be used,
it is associated with the cmQosPolicerProfileIndex.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.41.1.6

cmQosPolicerV2StorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.41.1.7

cmQosPolicerV2RowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.41.1.8

cmQosPolicerV2PolicingEnabled

Whether enable or disable the functionality of policing for this COS.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.41.1.9

cmQosShaperV2Table

table

.1.3.6.1.4.1.2544.1.12.4.1.42 · 1 row entry · 18 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmQosShaperV2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmQosShaperV2Table'

A list of entries corresponding to Quality of Service 
ShaperV2 for configuration purposes.

cmQosShaperV2Entry row .1.3.6.1.4.1.2544.1.12.4.1.42.1

A conceptual row in the cmQosShaperV2Table.
These entries represent a Quality of Service Shaper.

Indexes

No indexes recorded

Column Syntax OID

cmQosShaperV2Index

The ShaperV2 Index that represents the COS level. Index 1
represents COS 0; Index 2 represents COS 1 and so on.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.42.1.1

cmQosShaperV2AdminState

This object represents the Administrative State of
the QOS Shaper.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.42.1.2

cmQosShaperV2OperationalState

This object represents the Operational State of the QOS ShaperV2.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.42.1.3

cmQosShaperV2SecondaryState

This object represents the Secondary State of the QOS QosShaperV2.

CM-COMMON-MIBSecondaryState

Constraints:
range: 1-8

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.42.1.4

cmQosShaperV2AssociatedQueueProfile

This object defines the queue profile ID to be used,
it is associated with the cmQosQueueProfileIndex.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.42.1.5

cmQosShaperV2CIRLo

This object specifies the Lower 32 bits of CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.42.1.6

cmQosShaperV2CIRHi

This object specifies the Higher 32 bits of CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.42.1.7

cmQosShaperV2EIRLo

This object specifies the Lower 32 bits of EIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.42.1.8

cmQosShaperV2EIRHi

This object specifies the Higher 32 bits of EIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.42.1.9

cmQosShaperV2IngressAverageFrameSize

This object defines the average frame size for accounting for Meter/Shaping.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.42.1.10

cmQosShaperV2StorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.42.1.11

cmQosShaperV2RowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.42.1.12

cmQosShaperV2AdditionalCIRLo

This object specifies the Lower 32 bits of additional CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.42.1.13

cmQosShaperV2AdditionalCIRHi

This object specifies the Higher 32 bits of additional CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.42.1.14

cmQosShaperV2WFQWeight

Weight of queue to be scheduled by WFQ mechanism.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.42.1.15

cmQosShaperV2ActualCIR

This object specifies the actual CIR.

SNMPv2-SMICounter64

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.4.1.42.1.16

cmQosShaperV2ActualEIR

This object specifies the actual EIR.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.2544.1.12.4.1.42.1.17

cmQosShaperV2LowLatencyControl

This object specifies low latency control whether enabled.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.42.1.18

cmTrafficPortQosShaperTable

table

.1.3.6.1.4.1.2544.1.12.4.1.43 · 1 row entry · 15 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmTrafficPortQosShaperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmTrafficPortQosShaperTable'

A list of entries corresponding to Quality of Service 
Shaper for configuration purposes.

cmTrafficPortQosShaperEntry row .1.3.6.1.4.1.2544.1.12.4.1.43.1

A conceptual row in the cmTrafficPortQosShaperTable.
These entries represent a Quality of Service Shaper.

Indexes

No indexes recorded

Column Syntax OID

cmTrafficPortQosShaperIndex

The ShaperV2 Index that represents the COS level. Index 1
represents COS 0; Index 2 represents COS 1 and so on.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.43.1.1

cmTrafficPortQosShaperAdminState

This object represents the Administrative State of
the QOS Shaper.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.43.1.2

cmTrafficPortQosShaperOperationalState

This object represents the Operational State of the QOS ShaperV2.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.43.1.3

cmTrafficPortQosShaperSecondaryState

This object represents the Secondary State of the QOS LagQosShaper.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.43.1.4

cmTrafficPortQosShaperAssociatedQueueProfile

This object defines the queue profile ID to be used,
it is associated with the cmQosQueueProfileIndex.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.43.1.5

cmTrafficPortQosShaperBufferSize

This object defines the buffer size of Shaper.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.43.1.6

cmTrafficPortQosShaperCIRLo

This object specifies the Lower 32 bits of CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.43.1.7

cmTrafficPortQosShaperCIRHi

This object specifies the Higher 32 bits of CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.43.1.8

cmTrafficPortQosShaperEIRLo

This object specifies the Lower 32 bits of EIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.43.1.9

cmTrafficPortQosShaperEIRHi

This object specifies the Higher 32 bits of EIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.43.1.10

cmTrafficPortQosShaperStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.43.1.11

cmTrafficPortQosShaperRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.43.1.12

cmTrafficPortQosShaperIngressAverageFrameSize

This object defines the average frame size for accounting for Meter/Shaping.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.43.1.13

cmTrafficPortQosShaperAdditionalCIRLo

This object specifies the Lower 32 bits of additional CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.43.1.14

cmTrafficPortQosShaperAdditionalCIRHi

This object specifies the Higher 32 bits of additional CIR.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.43.1.15

f3NetPortQosShaperTable

table

.1.3.6.1.4.1.2544.1.12.4.1.45 · 1 row entry · 23 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3NetPortQosShaperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::f3NetPortQosShaperTable'

A list of entries corresponding to Ethernet Network Port 
Quality of Service Shaper for configuration purposes.
These shapers can be managed when the Network Port is
in evpl mode and are relevant for traffic in the
access to network direction.

f3NetPortQosShaperEntry row .1.3.6.1.4.1.2544.1.12.4.1.45.1

A conceptual row in the f3NetPortQosShaperTable.
These entries represent a Quality of Service Shaper.

Indexes

No indexes recorded

Column Syntax OID

f3NetPortQosShaperIndex

The unique integer index value corresponding to a
Quality of Service Shaper.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.45.1.1

f3NetPortQosShaperDirection

The direction of the Quality of Service Shaper.

CM-COMMON-MIBTrafficDirection

Type Values:

1	a2n
2	n2a
3	ingress
4	egress
5	n2n

.1.3.6.1.4.1.2544.1.12.4.1.45.1.2

f3NetPortQosShaperAdminState

This object represents the Administrative State of
the QOS Shaper.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.45.1.3

f3NetPortQosShaperOperationalState

This object represents the Operational State of the QOS Shaper.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.45.1.4

f3NetPortQosShaperSecondaryState

This object represents the Secondary State of the QOS Shaper.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.45.1.5

f3NetPortQosShaperCIRLo

This object represents the Commited Information
Rate(CIR) (Lower 32 bits)of a Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.45.1.6

f3NetPortQosShaperCIRHi

This object represents the Commited Information
Rate(CIR) (Higher 32 bits) of a Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.45.1.7

f3NetPortQosShaperEIRLo

This object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.45.1.8

f3NetPortQosShaperEIRHi

This object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.45.1.9

f3NetPortQosShaperCBS

This object represents the Commited Burst Size (CBS) of the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.45.1.10

f3NetPortQosShaperEBS

This object represents the Excess Burst Size (EBS) of the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.45.1.11

f3NetPortQosShaperBufferSize

This object represents the Buffer Size of the Shaper.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.45.1.12

f3NetPortQosShaperCOS

This object provides the COS (Class of Service)
value for the QOS Shaper.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.45.1.13

f3NetPortQosShaperSoamCIRLo

This object represents the Soam Commited Information
Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2544.1.12.4.1.45.1.14

f3NetPortQosShaperSoamCIRHi

This object represents the Soam Commited Information
Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2544.1.12.4.1.45.1.15

f3NetPortQosShaperSoamEIRLo

This object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2544.1.12.4.1.45.1.16

f3NetPortQosShaperSoamEIRHi

This object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2544.1.12.4.1.45.1.17

f3NetPortQosShaperWredGreenMinQueueThreshold

This object represents the Wred green packet min queue threshold value.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.45.1.18

f3NetPortQosShaperWredGreenMaxQueueThreshold

This object represents the Wred green packet max queue threshold value.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2544.1.12.4.1.45.1.19

f3NetPortQosShaperWredGreenDropProbability

This object represents the Wred green packet drop probability.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2544.1.12.4.1.45.1.20

f3NetPortQosShaperWredYellowMinQueueThreshold

This object represents the Wred yellow packet min queue threshold value.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2544.1.12.4.1.45.1.21

f3NetPortQosShaperWredYellowMaxQueueThreshold

This object represents the Wred yellow packet max queue threshold value.

SNMPv2-SMIUnsigned32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2544.1.12.4.1.45.1.22

f3NetPortQosShaperWredYellowDropProbability

This object represents the Wred yellow packet drop probability.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.45.1.23

f3Usb3GDCNPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.46 · 1 row entry · 37 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3Usb3GDCNPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::f3Usb3GDCNPortTable'

3G DCN Port table.
The table contains parameters of 3G USB modem.

f3Usb3GDCNPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.46.1

A conceptual row in the f3Usb3GDCNPortTable.

Indexes

No indexes recorded

Column Syntax OID

f3Usb3GDCNPortIndex

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.46.1.1

f3Usb3GDCNPortIfIndex

This object has the same value as ifIndex for
G3 DCN Port. An integer index value used to
uniquely identify this G3 DCN Port.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.46.1.2

f3Usb3GDCNPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.46.1.3

f3Usb3GDCNPortAdminState

This object represents the Administrative State of the G3 DCN Port.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.46.1.4

f3Usb3GDCNPortOperationalState

This object represents the Operational State of the G3 DCN Port.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.46.1.5

f3Usb3GDCNPortSecondaryState

This object represents the Secondary State of the G3 DCN Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.46.1.6

f3Usb3GDCNPortVendorName

This object provides the Vendor Name of the G3 DCN Port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.46.1.7

f3Usb3GDCNPortModel

This object provides the Model of the G3 DCN Port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.46.1.8

f3Usb3GDCNPortFSN

This object provides the Factory Serial Number of the G3 DCN Port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.46.1.9

f3Usb3GDCNPortIMEI

This object provides the International Mobile Equipment Identity of the G3 DCN Port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.46.1.10

f3Usb3GDCNPortHardwareVersion

This object provides the Hardware Version of the G3 DCN Port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.46.1.11

f3Usb3GDCNPortFirmwareVersion

This object provides the Firmware Version of the G3 DCN Port..

SNMPv2-TCDisplayString

Constraints:
range: 0-16

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.46.1.12

f3Usb3GDCNPortSIMStatus

This object provides the SIM card Status of the G3 DCN Port.

F3Usb3GSimCardState

Constraints:
range: 0-16

Type Values:

0	not-applicable
1	ok
2	notinserted
3	networkrejected
4	unknown

.1.3.6.1.4.1.2544.1.12.4.1.46.1.13

f3Usb3GDCNPortPINLeftChances

This object provides the Left Chances for PIN input of the G3 DCN Port.

SNMPv2-SMIInteger32

Constraints:
range: 0-32

.1.3.6.1.4.1.2544.1.12.4.1.46.1.14

f3Usb3GDCNPortPUKLeftChances

This object provides the Left Chances for PUK input of the G3 DCN Port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.46.1.15

f3Usb3GDCNPortConnectionStatus

This object provides the Wirless Connection Status of the G3 DCN Port.

F3Usb3GNetworkConnectionState

Type Values:

0	not-applicable
1	connecting
2	connected
3	disconnected

.1.3.6.1.4.1.2544.1.12.4.1.46.1.16

f3Usb3GDCNPortRSSI

This object provides the Received Signal Strength Indication of the G3 DCN Port.

F3Usb3GRecvSignalStrengthInd

Type Values:

0	not-applicable
1	high
2	medium
3	low
4	none

.1.3.6.1.4.1.2544.1.12.4.1.46.1.17

f3Usb3GDCNPortSpeed

This object provides the Connection Speed of the G3 DCN Port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.46.1.18

f3Usb3GDCNPortMTU

This object provides the MTU of the G3 DCN Port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.46.1.19

f3Usb3GDCNPortProviderName

This object provides the Wireless Service Provider Name of the G3 DCN Port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.46.1.20

f3Usb3GDCNPortDNS1

This first DNS of the interface.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.46.1.21

f3Usb3GDCNPortDNS2

This second DNS of the interface.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.46.1.22

f3Usb3GDCNPortAPN

This object allows configure the Access Point Name of the G3 DCN Port.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.46.1.23

f3Usb3GDCNPortUserName

This object allows configure the User Name of the G3 DCN Port.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.46.1.24

f3Usb3GDCNPortPassword

This object allows configure the Password of the G3 DCN Port.

OctetStringr/w

Constraints:
range: 2-300

.1.3.6.1.4.1.2544.1.12.4.1.46.1.25

f3Usb3GDCNPortDailNumber

This object allows configure the Dail Number of the G3 DCN Port.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.46.1.26

f3Usb3GDCNPortRedialTimer

This object allows configure the Retail Timer of the G3 DCN Port.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.46.1.27

f3Usb3GDCNPortCurrentPinCode

This object is the Current Pin Code.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.46.1.28

f3Usb3GDCNPortNewPinCode

This object is the New Pin code.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2544.1.12.4.1.46.1.29

f3Usb3GDCNPortConfirmPinCode

This object is the Confirm Pin Code.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2544.1.12.4.1.46.1.30

f3Usb3GDCNPortCurrentPukCode

This object is the Current Puk Code.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2544.1.12.4.1.46.1.31

f3Usb3GDCNPINCodeAction

This Action is for PIN code operation.

F3Usb3GDCNPINCodeActionTyper/w

Type Values:

0	not-applicable
1	enable-pin
2	disable-pin
3	change-pin
4	authentication-pin
5	unlock-pin

.1.3.6.1.4.1.2544.1.12.4.1.46.1.32

f3Usb3GDCNPortStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.46.1.33

f3Usb3GDCNPortRowStatus

The status of this row.
The f3Usb3GDCNPortRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3).

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.46.1.34

f3Usb3GDCNPortIMSI

This object provides the International Mobile Subscriber Identity of the G3 DCN Port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.46.1.35

f3Usb3GDCNPortPINStatus

This status of PIN/PUK

G3AuthStatus

Type Values:

1	disabled
2	ok
3	input-pin
4	input-puk
5	locked
6	none

.1.3.6.1.4.1.2544.1.12.4.1.46.1.36

f3UsbDCNPortMobileNetworkType

This object describe the mobile network type.

UsbDCNMobileNetworkType

Type Values:

1	none
2	secondGeneration
3	thirdGeneration
4	fourthGeneration
5	notApplicable

.1.3.6.1.4.1.2544.1.12.4.1.46.1.37

ocnStmTable

table

.1.3.6.1.4.1.2544.1.12.4.1.47 · 1 row entry · 35 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk ocnStmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::ocnStmTable'

A list of entries corresponding to OCn/STM interface.

ocnStmEntry row .1.3.6.1.4.1.2544.1.12.4.1.47.1

A conceptual row in the ocnStmTable.

Indexes

No indexes recorded

Column Syntax OID

ocnStmIndex

Unique index value associated with the OCn/STM interface.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.47.1.1

ocnStmIfIndex

This object has the same value as ifIndex for OCn/STM interface.
An integer index value used to uniquely identify
this OCn/STM interface.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.47.1.2

ocnStmEntityIndex

Entity Index from ENTITY-MIB for this OCn/STM interface.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.47.1.3

ocnStmAdminState

This object represents the Administrative State of the OCn/STM interface.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.47.1.4

ocnStmOperationalState

This object represents the Operational State of the OCn/STM interface.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.47.1.5

ocnStmSecondaryState

This object represents the Secondary State of the OCn/STM interface.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.47.1.6

ocnStmSfpVendorName

This object provides the vendor name of the SFP.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.47.1.7

ocnStmSfpPartNumber

This object provides the part number of the SFP.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.47.1.8

ocnStmSfpSerialNumber

This object provides the serial number of the SFP.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.47.1.9

ocnStmSfpDateOfManufacture

This object provides the date of manufacture of the SFP.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.4.1.47.1.10

ocnStmSfpConnectorValue

This object provides the SFP connector value.

CM-COMMON-MIBSfpConnectorValue

Type Values:

0	not-applicable
1	unknown
2	sc
3	fcs1cu
4	fcs2cu
5	bnc-tnc
6	fccoaxhdr
7	fjack
8	lc
9	mt-rj
10	mu
11	sg
12	optpigtail
13	hssdc
14	cupigtail
15	vendorspecific
16	rj45

.1.3.6.1.4.1.2544.1.12.4.1.47.1.11

ocnStmSfpLinkLength

This object provides the SFP Link Length.

SNMPv2-SMIInteger32

Constraints:
range: 2-300

.1.3.6.1.4.1.2544.1.12.4.1.47.1.12

ocnStmSfpLaserWaveLength

This object provides the SFP Laser Wave Length in nano meters.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.47.1.13

ocnStmSfpLaserWaveLengthPicometer

This object provide laser wavelength pico value.
For example, laser wavelength is 1510.01,
then ocnStmSfpLaserWaveLength=1510
and ocnStmSfpLaserWaveLengthPicometer=10.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.47.1.14

ocnStmSfpMediaType

This object provides the SFP Media Type.

CM-COMMON-MIBSfpMediaType

Type Values:

0	not-applicable
1	singlemode
2	multimode
3	multimode62-5
4	copper

.1.3.6.1.4.1.2544.1.12.4.1.47.1.15

ocnStmMultiplexingStructures

This object provides the TDM Multiplexing Structure base on OCn/STM interface.

MultiplexingStructurer/w

Type Values:

0	not-applicable
1	vt-sts1
2	sts1spe-sts1
3	sts3cspe-sts3c
4	vc12-vc4-aug
5	vc12-vc3-aug
6	vc3-aug
7	vc3-vc4-aug
8	vc4-aug
9	custom

.1.3.6.1.4.1.2544.1.12.4.1.47.1.16

ocnStmEoTDMMode

This object provides the TDM Mode base on OCn/STM interface.
EoPDH means VCG container is PDH; EoTDM means VCG container is VC of SDH/SONET

EoTDMModer/w

Constraints:
range: 0-128

Type Values:

0	not-applicable
1	eosdh
2	eopdh

.1.3.6.1.4.1.2544.1.12.4.1.47.1.17

ocnStmLoopbackConfig

This object allows to initiate loopbacks on
on the OCn/STM interface.

CmLoopbackTyper/w

Constraints:
range: 0-128

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.47.1.18

ocnStmLoopbackStatus

This object provides status of the current loopback
on the OCn/STM interface.

CmLoopbackType

Constraints:
range: 0-128

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.47.1.19

ocnStmLoopbackTime

This object allows to specify time for timed-loopbacks on
on the OCn/STM interface.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2544.1.12.4.1.47.1.20

ocnStmInsertingAIS

This object allows to insert AIS-L out from OCn/STM interface
when it is in maintenance state.

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-255

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.47.1.21

ocnStmBerExcThreshold

This object provide the threshold of B2EXC.

BitErrRater/w

Constraints:
range: 0-255

Type Values:

0	none
1	ber-1e-1
2	ber-1e-2
3	ber-1e-3
4	ber-1e-4
5	ber-1e-5
6	ber-1e-6
7	ber-1e-7
8	ber-1e-8
9	ber-1e-9
10	ber-1e-10

.1.3.6.1.4.1.2544.1.12.4.1.47.1.22

ocnStmBerDegThreshold

This object provides the threshold of B2DEG.

BitErrRater/w

Type Values:

0	none
1	ber-1e-1
2	ber-1e-2
3	ber-1e-3
4	ber-1e-4
5	ber-1e-5
6	ber-1e-6
7	ber-1e-7
8	ber-1e-8
9	ber-1e-9
10	ber-1e-10

.1.3.6.1.4.1.2544.1.12.4.1.47.1.23

ocnStmRxTrailTrace

This object provides the recevied J0 on the OCn/STM interface.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.47.1.24

ocnStmTxTrailTrace

This object provides the transmit J0 on the OCn/STM interface.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.47.1.25

ocnStmExpectedTrailTrace

This object provides the expected J0 on the OCn/STM interface.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.47.1.26

ocnStmTrailTraceFormat

This object provides the J0 length mode on the OCn/STM interface.

TrailTraceFormatr/w

Type Values:

0	not-applicable
1	onebytemode
2	sixteenbytemode
3	sixtyfourbytemode

.1.3.6.1.4.1.2544.1.12.4.1.47.1.27

ocnStmQLModeEnabled

This object allows to specify whether the OCn/STM interface
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous OCn/STM interface,
when ocnStmQLModeEnabled is set to true.
When enabled, …

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.47.1.28

ocnStmExpectedQL

This object allows to specify the expected QL when the
OCn/STM interface is enabled for QL Mode. This object
is only applicable for Synchronous OCn/STM interface,
when ocnStmQLModeEnabled is set to true.
This object al…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.47.1.29

ocnStmAssumedQL

This object allows to specify the assumed QL on the
OCn/STM interface. This object is only applicable for
Synchronous OCn/STM interface.
The Assumed QL is only meaningful if the Network Clock Type
(see fsp150cm-sync.…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.47.1.30

ocnStmReceivedQL

This object provides the Received QL value for the OCn/STM interface.
If the OCn/STM interface TransmitQL Mode is disabled, then the received
QL value is not applicable.This object is only applicable for
Synchronous …

F3-SYNC-MIBSSMQualityLevel

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.47.1.31

ocnStmTransmitQL

This object provides the Transmitted QL value for the OCn/STM interface.
If the OCn/STM interface TransmitQL Mode is disabled, then the received
QL value is not applicable. This object is only applicable for
Synchron…

F3-SYNC-MIBSSMQualityLevel

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.47.1.32

ocnStmPortType

This object represents the OCN/STM Port Type.
Determines whether the OCN/STM port operates in OC or STM mode.

OCNSTMPortType

Type Values:

1	oc12
2	oc3
3	stm4
4	stm1

.1.3.6.1.4.1.2544.1.12.4.1.47.1.33

ocnStmFreqSourceType

This object represents the TDM Frequency source of OCN/STM port.

CM-COMMON-MIBTDMFrequencySourceTyper/w

Type Values:

0	notApplicable
1	loopTiming
2	systemTiming
3	lineTiming

.1.3.6.1.4.1.2544.1.12.4.1.47.1.34

ocnStmHighOrderPathType

This object provides the High Order Path Type of the OCn/STM interface.

TDMPathTyper/w

Constraints:
range: 2-300

Type Values:

0	none
1	t1
2	e1
3	t3
4	e3
5	vc12
6	vc3
7	vc4
8	vt15
9	sts1
10	sts3c

.1.3.6.1.4.1.2544.1.12.4.1.47.1.35

stsVcPathTable

table

.1.3.6.1.4.1.2544.1.12.4.1.48 · 1 row entry · 21 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk stsVcPathTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::stsVcPathTable'

A list of entries corresponding to OCn Path.

stsVcPathEntry row .1.3.6.1.4.1.2544.1.12.4.1.48.1

A conceptual row in the stsVcPathTable.

Indexes

No indexes recorded

Column Syntax OID

stsVcPathParentIfIndex

This object is its parent's ifindex. Based on the Multiplexing hierarchy,
this object points to the container's interface index.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.48.1.1

stsVcPathIndex

This object is his index.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.48.1.2

stsVcPathIfIndex

This object has the same value as ifIndex for OCn Path.
An integer index value used to uniquely identify
this OCn Path interface.

IF-MIBInterfaceIndex

Constraints:
range: 0-128

Description:

.1.3.6.1.4.1.2544.1.12.4.1.48.1.3

stsVcPathAdminState

This object represents the Administrative State of the OCn Path.

CM-COMMON-MIBAdminStater/w

Constraints:
range: 0-128

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.48.1.4

stsVcPathOperationalState

This object represents the Operational State of the OCn Path.

CM-COMMON-MIBOperationalState

Constraints:
range: 0-128

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.48.1.5

stsVcPathSecondaryState

This object represents the Secondary State of the OCn Path.

CM-COMMON-MIBSecondaryState

Constraints:
range: 0-7

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.48.1.6

stsVcPathLoopbackConfig

This object allows to initiate loopbacks on
on the OCn Path.

CmLoopbackTyper/w

Constraints:
range: 0-7

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.48.1.7

stsVcPathLoopbackStatus

This object provides status of the current loopback
on the OCn Path.

CmLoopbackType

Constraints:
range: 0-7

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.48.1.8

stsVcPathLoopbackTime

This object allows to specify time for timed-loopbacks on
on the OCn Path.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.48.1.9

stsVcPathInsertingAIS

This object allows to insert AIS-P out from OCn Path
when it is in maintenance state.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.48.1.10

stsVcPathBerExcThreshold

This object provide the threshold of B3EXC.

BitErrRater/w

Type Values:

0	none
1	ber-1e-1
2	ber-1e-2
3	ber-1e-3
4	ber-1e-4
5	ber-1e-5
6	ber-1e-6
7	ber-1e-7
8	ber-1e-8
9	ber-1e-9
10	ber-1e-10

.1.3.6.1.4.1.2544.1.12.4.1.48.1.11

stsVcPathBerDegThreshold

This object provides the threshold of B3DEG.

BitErrRater/w

Type Values:

0	none
1	ber-1e-1
2	ber-1e-2
3	ber-1e-3
4	ber-1e-4
5	ber-1e-5
6	ber-1e-6
7	ber-1e-7
8	ber-1e-8
9	ber-1e-9
10	ber-1e-10

.1.3.6.1.4.1.2544.1.12.4.1.48.1.12

stsVcPathTrailTraceFormat

This object provides the J1 length mode on the OCn Path.

TrailTraceFormatr/w

Type Values:

0	not-applicable
1	onebytemode
2	sixteenbytemode
3	sixtyfourbytemode

.1.3.6.1.4.1.2544.1.12.4.1.48.1.13

stsVcPathRxTrailTrace

This object provides the recevied J1 on the OCn Path.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.48.1.14

stsVcPathTxTrailTrace

This object provides the transmit J1 on the OCn Path.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.48.1.15

stsVcPathExpectedTrailTrace

This object provides the expected J1 on the OCn Path.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.48.1.16

stsVcPathRxSignalLabel

This object provides the recevied C2 on the OCn Path.

Unsigned32

.1.3.6.1.4.1.2544.1.12.4.1.48.1.17

stsVcPathTxSignalLabel

This object provides the transmit C2 on the OCn Path.

Unsigned32r/w

.1.3.6.1.4.1.2544.1.12.4.1.48.1.18

stsVcPathExpectedSignalLabel

This object provides the expected C2 on the OCn Path.

Unsigned32r/w

.1.3.6.1.4.1.2544.1.12.4.1.48.1.19

stsVcPathRowStatus

The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.48.1.20

stsVcPathLowOrderPathType

This object provides the low Order Path Type of the sts vc interface.

TDMPathTyper/w

Constraints:
range: 2-300

Type Values:

0	none
1	t1
2	e1
3	t3
4	e3
5	vc12
6	vc3
7	vc4
8	vt15
9	sts1
10	sts3c

.1.3.6.1.4.1.2544.1.12.4.1.48.1.21

vtVcPathTable

table

.1.3.6.1.4.1.2544.1.12.4.1.49 · 1 row entry · 20 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk vtVcPathTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::vtVcPathTable'

A list of entries corresponding to VT1.5/VC12. These represent the
lower order path (LOP) entities.

vtVcPathEntry row .1.3.6.1.4.1.2544.1.12.4.1.49.1

A conceptual row in the vtVcPathTable.

Indexes

No indexes recorded

Column Syntax OID

vtVcPathParentIfIndex

This object is its parent's ifindex.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.49.1.1

vtVcPathIndex

This object represents the unique number of the Path within the
parent container represented by vtvcPathParentIfIndex.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.49.1.2

vtVcPathIfIndex

This object has the same value as ifIndex for OCn VT1.5/VC12.
An integer index value used to uniquely identify
this OCn VT1.5/VC12 interface.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.49.1.3

vtVcPathAdminState

This object represents the Administrative State of the OCn VT1.5/VC12.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.49.1.4

vtVcPathOperationalState

This object represents the Operational State of the OCn VT1.5/VC12.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.49.1.5

vtVcPathSecondaryState

This object represents the Secondary State of the OCn VT1.5/VC12.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.49.1.6

vtVcPathLoopbackConfig

This object allows to initiate loopbacks on
on the OCn VT1.5/VC12.

CmLoopbackTyper/w

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.49.1.7

vtVcPathLoopbackStatus

This object provides status of the current loopback
on the OCn VT1.5/VC12.

CmLoopbackType

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.49.1.8

vtVcPathLoopbackTime

This object allows to specify time for timed-loopbacks on
on the OCn VT1.5/VC12.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.49.1.9

vtVcPathInsertingAIS

This object allows to insert AIS-P out from OCn VT1.5/VC12
when it is in maintenance state.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.49.1.10

vtVcPathBerExcThreshold

This object provide the threshold of BEREXC.

BitErrRater/w

Type Values:

0	none
1	ber-1e-1
2	ber-1e-2
3	ber-1e-3
4	ber-1e-4
5	ber-1e-5
6	ber-1e-6
7	ber-1e-7
8	ber-1e-8
9	ber-1e-9
10	ber-1e-10

.1.3.6.1.4.1.2544.1.12.4.1.49.1.11

vtVcPathBerDegThreshold

This object provides the threshold of BERDEG.

BitErrRater/w

Type Values:

0	none
1	ber-1e-1
2	ber-1e-2
3	ber-1e-3
4	ber-1e-4
5	ber-1e-5
6	ber-1e-6
7	ber-1e-7
8	ber-1e-8
9	ber-1e-9
10	ber-1e-10

.1.3.6.1.4.1.2544.1.12.4.1.49.1.12

vtVcPathTrailTraceFormat

This object provides the J2 length mode on the OCn VT1.5/VC12.

TrailTraceFormat

Type Values:

0	not-applicable
1	onebytemode
2	sixteenbytemode
3	sixtyfourbytemode

.1.3.6.1.4.1.2544.1.12.4.1.49.1.13

vtVcPathRxTrailTrace

This object provides the recevied J2 on the OCn VT1.5/VC12.

OctetString

.1.3.6.1.4.1.2544.1.12.4.1.49.1.14

vtVcPathTxTrailTrace

This object provides the transmit J2 on the OCn VT1.5/VC12.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.49.1.15

vtVcPathExpectedTrailTrace

This object provides the expected J2 on the OCn VT1.5/VC12.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.49.1.16

vtVcPathRxSignalLabel

This object provides the recevied V5 byte(b5-b7) on the OCn VT1.5/VC12.

Unsigned32

.1.3.6.1.4.1.2544.1.12.4.1.49.1.17

vtVcPathTxSignalLabel

This object provides the transmit V5 byte(b5-b7) on the OCn VT1.5/VC12.

Unsigned32r/w

.1.3.6.1.4.1.2544.1.12.4.1.49.1.18

vtVcPathExpectedSignalLabel

This object provides the expected V5 byte(b5-b7) on the OCn VT1.5/VC12.

Unsigned32r/w

.1.3.6.1.4.1.2544.1.12.4.1.49.1.19

vtVcPathRowStatus

The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.49.1.20

e1t1Table

table

.1.3.6.1.4.1.2544.1.12.4.1.50 · 1 row entry · 22 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk e1t1Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::e1t1Table'

A list of entries corresponding to E1/T1.

e1t1Entry row .1.3.6.1.4.1.2544.1.12.4.1.50.1

A conceptual row in the e1t1Table.

Indexes

No indexes recorded

Column Syntax OID

e1t1ParentIfIndex

This object represents the parent (container) object's interface index.
In the case when parent of E1T1Entry does not have a InterfaceIndex
then the e1t1ParentIfIndex shall have the value of 2147483647,
e.g. if parent …

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.50.1.1

e1t1Index

Index value used to uniquely identify
this E1/T1 interface, within the parent container specified by
e1t1ParentIfIndex.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.50.1.2

e1t1IfIndex

This object has the same value as ifIndex for E1/T1.
An integer index value used to uniquely identify
this E1/T1 interface.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.50.1.3

e1t1EntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.50.1.4

e1t1AdminState

This object represents the Administrative State of the E1/T1.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.50.1.5

e1t1OperationalState

This object represents the Operational State of the E1/T1.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.50.1.6

e1t1SecondaryState

This object represents the Secondary State of the E1/T1.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.50.1.7

e1t1LoopbackConfig

This object allows to initiate loopbacks on
on the E1/T1.

CmLoopbackTyper/w

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.50.1.8

e1t1LoopbackStatus

This object provides status of the current loopback
on the E1/T1.

CmLoopbackType

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.50.1.9

e1t1LoopbackTime

This object allows to specify time for timed-loopbacks on
on the E1/T1.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.50.1.10

e1t1RemoteLoopbackRequest

This object allows to specify to repond the remote loopback request or not.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.50.1.11

e1t1InsertingAIS

This object allows to insert AIS out from E1/T1
when it is in maintenance state.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.50.1.12

e1t1RowStatus

The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.50.1.13

e1t1LineType

This object represents the E1/T1 Line Type.
Determines whether the E1/T1 interface operates in T1 or E1 mode.

E1T1LineType

Constraints:
range: 1-65535

Type Values:

1	t1
2	e1

.1.3.6.1.4.1.2544.1.12.4.1.50.1.14

e1t1LineCode

This object represents the E1/T1 Port Line Code.
When the port is configured for a Line Type of T1,
the valid values are t1-b8zs and t1-ami and the default value
is t1-b8zs. When the port is configured for a Line Type …

E1T1LineCoder/w

Type Values:

1	none
2	t1-b8zs
3	t1-ami
4	e1-hdb3
5	e1-ami

.1.3.6.1.4.1.2544.1.12.4.1.50.1.15

e1t1FrameFormat

This object represents the E1/T1 Port Frame Format.
When the port is configured for a Line Type of T1, the
valid values are t1-sf, t1-esf and t1-unframed and the default
value is t1-unframed.
When the port is configure…

E1T1FrameFormatr/w

Type Values:

1	none
2	t1-sf
3	t1-esf
4	e1-unframed
5	e1-crc4
6	e1-dualframe
7	t1-unframed
8	e1-basicframe

.1.3.6.1.4.1.2544.1.12.4.1.50.1.16

e1t1LineBuildOut

This object represents Line Build Out on E1/T1 port.

LineBuildOutr/w

Type Values:

0	none
1	lbo-0-133ft
2	lbo-133-266ft
3	lbo-266-399ft
4	lbo-399-533ft
5	lbo-533-655ft
6	lbo-7dot5db
7	lbo-15db
8	lbo-22dot5db

.1.3.6.1.4.1.2544.1.12.4.1.50.1.17

e1t1TimingDomain

This object represents Timing Domain that the E1/T1 interface uses as
timing source. The Timing Domain is a Synchronization Entity
represented by an object in the f3SyncTable

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.50.1.18

e1t1RcvSensitivity

This object allows configuring the reciever sensitivity based on expected
signal strength

E1T1RcvSensitivityr/w

Type Values:

1	high-range
2	low-range

.1.3.6.1.4.1.2544.1.12.4.1.50.1.19

e1t1IdlePatternProfile

This object allows selecting Idle Pattern Profile for the E1/T1 interface.
Idle Patter Profile is represented by an object in the
f3Pwe3IdlePatternProfileTable

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.50.1.20

e1t1LoopbackProfile

This object allows selecting Loopback Profile for the E1/T1 interface.
Loopback Profile is represented by an object in the
f3Pwe3LoopbackProfileTable

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.50.1.21

e1t1RelatedContainerId

This object describes the related container VCG.

SNMPv2-TCVariablePointer

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.50.1.22

e3t3Table

table

.1.3.6.1.4.1.2544.1.12.4.1.51 · 1 row entry · 17 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk e3t3Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::e3t3Table'

A list of entries corresponding to E3/T3.

e3t3Entry row .1.3.6.1.4.1.2544.1.12.4.1.51.1

A conceptual row in the e3t3Table.

Indexes

No indexes recorded

Column Syntax OID

e3t3ParentIfIndex

This object is its parent's ifindex.

IF-MIBInterfaceIndex

Constraints:
range: 0-90

Description:

.1.3.6.1.4.1.2544.1.12.4.1.51.1.1

e3t3Index

This object is his index.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.51.1.2

e3t3IfIndex

This object has the same value as ifIndex for E3/T3.
An integer index value used to uniquely identify
this E3/T3 interface.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.51.1.3

e3t3EntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.51.1.4

e3t3AdminState

This object represents the Administrative State of the E3/T3.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.51.1.5

e3t3OperationalState

This object represents the Operational State of the E3/T3.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.51.1.6

e3t3SecondaryState

This object represents the Secondary State of the E3/T3.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.51.1.7

e3t3LoopbackConfig

This object allows to initiate loopbacks on
on the E3/T3.

CmLoopbackTyper/w

Constraints:
range: 1-65535

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.51.1.8

e3t3LoopbackStatus

This object provides status of the current loopback
on the E3/T3.

CmLoopbackType

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.51.1.9

e3t3LoopbackTime

This object allows to specify time for timed-loopbacks on
on the E3/T3.

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.51.1.10

e3t3RemoteLoopbackRequest

This object allows to specify to repond the remote loopback request or not.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.51.1.11

e3t3InsertingAIS

This object allows to insert AIS out from E3/T3
when it is in maintenance state.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.51.1.12

e3t3CBitEnable

The object provides whether C-Bit Parity is enabled/disabled.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.51.1.13

e3t3T3Channelized

The object provides whether the T3 tunnel is channlized with T1.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.51.1.14

e3t3RowStatus

The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.51.1.15

e3t3FrameFormat

This object represents the Frame Format of the E3/T3.

E3T3FrameFormatr/w

Type Values:

0	none
1	dsx3CbitParity
2	g832
3	e3Unframed
4	dsx3M23
5	g751
6	dsx3Unframed

.1.3.6.1.4.1.2544.1.12.4.1.51.1.16

e3t3RelatedContainerId

This object describe the related contained VCG.

SNMPv2-TCVariablePointer

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.51.1.17

cmEthernetTrafficPortExtTable

table

.1.3.6.1.4.1.2544.1.12.4.1.52 · 1 row entry · 2 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetTrafficPortExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetTrafficPortExtTable'

A list of entries corresponding to Ethernet 
Facilities for configuration purposes.

cmEthernetTrafficPortExtEntry row .1.3.6.1.4.1.2544.1.12.4.1.52.1

A conceptual row in the cmEthernetTrafficPortExtTable.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetTrafficPortTDMEncapsulation

This object describes the GFP Encapsulation type of the traffic port.

GFPEncapsulationTyper/w

Type Values:

0	none
1	gfp
2	gfp-fcs
3	gfp-novcat
4	gfp-zerovcat
5	gfp-fcs-novcat
6	gfp-fcs-zerovcat
7	x86

.1.3.6.1.4.1.2544.1.12.4.1.52.1.1

cmEthernetTrafficPortRelatedVCG

This object describes the related VCG of the traffic port.

SNMPv2-TCVariablePointer

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.52.1.2

f3PulsePerSecondPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.53 · 1 row entry · 16 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3PulsePerSecondPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::f3PulsePerSecondPortTable'

A list of entries corresponding to Pulse Per Second 
Port Facilities.

f3PulsePerSecondPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.53.1

A conceptual row in the f3PulsePerSecondPortTable.

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex f3GPSReceiverPortIndex

Column Syntax OID

f3PulsePerSecondPortIndex

An integer index value used to uniquely identify
this Pulse Per Second Port within the card.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2544.1.12.4.1.53.1.1

f3PulsePerSecondPortIfIndex

This object has the same value as ifIndex for
Pulse Per Second Port. An integer index value used to
uniquely identify this Pulse Per Second Port.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.53.1.2

f3PulsePerSecondPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.53.1.3

f3PulsePerSecondPortAdminState

This object represents the Administrative State of the Pulse Per Second
Port.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.53.1.4

f3PulsePerSecondPortOperationalState

This object represents the Operational State of the Pulse Per Second
Port.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.53.1.5

f3PulsePerSecondPortSecondaryState

This object represents the Secondary State of the Pulse Per Second
Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.53.1.6

f3PulsePerSecondPortSquelchControl

This object allows to set the Squelch Control for the Pulse Per Second port.
The Squelch Control is used to determine the type of squelch control
used to squelch the output of the TOD port.

F3-SYNC-MIBSquelchControlr/w

Type Values:

1	never
2	holdover
3	lock
4	squelch-ql

.1.3.6.1.4.1.2544.1.12.4.1.53.1.7

f3PulsePerSecondPortSquelchQL

This object allows to set the Squelch QL for the Pulse Per Second port.
This value is used when f3PulsePerSecondPortSquelchControl is squelch-ql.
The Squelch QL is used to determine whether or not to squelch
the outpu…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.53.1.8

f3PulsePerSecondPortTODSource

This object allows to set the Pulse Per Second Source for the Port.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.53.1.9

f3PulsePerSecondPortDirection

This object allows specification of the signal type
(i.e. input or output).

CM-COMMON-MIBSignalDirectionTyper/w

Type Values:

1	input
2	output

.1.3.6.1.4.1.2544.1.12.4.1.53.1.10

f3PulsePerSecondPortInputRate

This object allows specification of the PPS Input Rate.

PPSInputRater/w

Type Values:

1	pulse-per-sec
2	pulse-per-2sec

.1.3.6.1.4.1.2544.1.12.4.1.53.1.11

f3PulsePerSecondPortDelayCompensation

This object allows specification of the PPS external Delay
Compensation in nanoseconds. The valid values are 0 to 96 in
8 nanoseconds steps. Values which are not multiple of 8 will
be automatically rounded up to the ne…

Integer32r/w

.1.3.6.1.4.1.2544.1.12.4.1.53.1.12

f3PulsePerSecondPortClockClassdeprecated

This object specify PPS port clock class.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.53.1.13

f3PulsePerSecondPortClockAccuracydeprecated

This object specify PPS port clock accuracy.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.53.1.14

f3PulsePerSecondPortTimeSourcedeprecated

This object specify PPS port time source.

F3-SYNC-MIBTimeSource

Type Values:

1	atomic
2	gps
3	ptp
4	internal
5	other

.1.3.6.1.4.1.2544.1.12.4.1.53.1.15

f3PulsePerSecondPortPhyInterfaceType

This object specify PPS physical interface type.

PPSPhyInterfaceTyper/w

Type Values:

0	none
1	pps
2	tod

.1.3.6.1.4.1.2544.1.12.4.1.53.1.16

f3TimeOfDayPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.55 · 1 row entry · 9 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3TimeOfDayPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::f3TimeOfDayPortTable'

A list of entries corresponding to Time Of Day 
Port Facilities.

f3TimeOfDayPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.55.1

A conceptual row in the f3TimeOfDayPortTable.

Indexes

No indexes recorded

Column Syntax OID

f3TimeOfDayPortIndex

An integer index value used to uniquely identify
this Time Of Day Port within the card.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.55.1.1

f3TimeOfDayPortIfIndex

This object has the same value as ifIndex for
Time Of Day Port. An integer index value used to
uniquely identify this Time Of Day Port.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.55.1.2

f3TimeOfDayPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.55.1.3

f3TimeOfDayPortAdminState

This object represents the Administrative State of the Time Of Day
Port.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.55.1.4

f3TimeOfDayPortOperationalState

This object represents the Operational State of the Time Of Day
Port.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.55.1.5

f3TimeOfDayPortSecondaryState

This object represents the Secondary State of the Time Of Day
Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.55.1.6

f3TimeOfDayPortSquelchControl

This object allows to set the Squelch Control for the Time Of Day port.
The Squelch Control is used to determine the type of squelch control
used to squelch the output of the TOD port.

F3-SYNC-MIBSquelchControlr/w

Type Values:

1	never
2	holdover
3	lock
4	squelch-ql

.1.3.6.1.4.1.2544.1.12.4.1.55.1.7

f3TimeOfDayPortSquelchQL

This object allows to set the Squelch QL for the Time Of Day port.
This value is used when f3TimeOfDayPortSquelchControl is squelch-ql.
The Squelch QL is used to determine whether or not to squelch
the output of the T…

F3-SYNC-MIBSSMQualityLevelr/w

Type Values:

0	not-applicable
1	ql-dnu
2	ql-eec1
3	ql-eec2
4	ql-inv
5	ql-inv0
6	ql-inv1
7	ql-inv2
8	ql-inv3
9	ql-inv5
10	ql-inv7
11	ql-inv8
12	ql-inv9
13	ql-inv10
14	ql-inv11
15	ql-inv12
16	ql-none
17	ql-nsupp
18	ql-prc
19	ql-prov
20	ql-prs
21	ql-smc
22	ql-ssu-a
23	ql-ssu-b
24	ql-st2
25	ql-st3e
26	ql-stu
27	ql-tnc
28	ql-unc
29	ql-failed
30	ql-inv6
31	ql-inv13
32	ql-inv14
33	ql-dus
34	ql-na

.1.3.6.1.4.1.2544.1.12.4.1.55.1.8

f3TimeOfDayPortTODSource

This object allows to set the Time Of Day Source for the Port.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.55.1.9

cmEthernetNetPortExtTable

table

.1.3.6.1.4.1.2544.1.12.4.1.56 · 1 row entry · 3 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetNetPortExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetNetPortExtTable'

A list of entries corresponding to Ethernet Network Port 
Facilities for configuration purposes.

cmEthernetNetPortExtEntry row .1.3.6.1.4.1.2544.1.12.4.1.56.1

A conceptual row in the cmEthernetNetPortExtTable.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetNetPortTDMEncapsulation

This object describes the GFP Encapsulation type of the TDM network port.

GFPEncapsulationTyper/w

Type Values:

0	none
1	gfp
2	gfp-fcs
3	gfp-novcat
4	gfp-zerovcat
5	gfp-fcs-novcat
6	gfp-fcs-zerovcat
7	x86

.1.3.6.1.4.1.2544.1.12.4.1.56.1.1

cmEthernetNetPortAssociatedTdmEntity

This object describes the associated working path of TDM network port.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.56.1.2

cmEthernetNetPortInsertingAIS

This object allows to insert AIS out from TDM network port
when it is in maintenance state.

SNMPv2-TCTruthValuer/w

Constraints:
range: 1-65535

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.56.1.3

f3GPSReceiverPortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.57 · 1 row entry · 18 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3GPSReceiverPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::f3GPSReceiverPortTable'

A list of entries corresponding to the GPS Receiver Port 
Facilities.

f3GPSReceiverPortEntry row .1.3.6.1.4.1.2544.1.12.4.1.57.1

A conceptual row in the f3GPSReceiverPortTable.

Indexes

No indexes recorded

Column Syntax OID

f3GPSReceiverPortIndex

An integer index value used to uniquely identify
this GPS Receiver Port within the card.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.57.1.1

f3GPSReceiverPortIfIndex

This object has the same value as ifIndex for
Time Of Day Port. An integer index value used to
uniquely identify this GPS Receiver Port.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.57.1.2

f3GPSReceiverPortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.57.1.3

f3GPSReceiverPortAdminState

This object represents the Administrative State of the GPS
Receiver Port.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.57.1.4

f3GPSReceiverPortOperationalState

This object represents the Operational State of the GPS
Receiver Port.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.57.1.5

f3GPSReceiverPortSecondaryState

This object represents the Secondary State of the GPS
Receiver Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.57.1.6

f3GPSReceiverPortPPSGenCondition

This object allows for configuration of the PPS generation
condition. PPS is generated when at least one satellite
is tracked or when at least three satellites are tracked.

PPSGenConditionr/w

Type Values:

1	tracked-1sat
2	tracked-3sat

.1.3.6.1.4.1.2544.1.12.4.1.57.1.7

f3GPSReceiverPortAntennaCableLength

This object allows for configuration of the GPS
Antenna cable length in meters.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.57.1.8

f3GPSReceiverPortAntennaStatus

This object provides the GPS Receiver Port Antenna status.

GPSAntennaStatus

Type Values:

1	open
2	short
3	normal
4	unavailable

.1.3.6.1.4.1.2544.1.12.4.1.57.1.9

f3GPSReceiverPortSatellitesUsableFlag

This object provides information on whether the satellites are
usable. It is set to TRUE, when ephemeris and health data for
at least one satellite is available.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.57.1.10

f3GPSReceiverPortNumTrackingSatellites

This object provides information on the number of tracking
satellites.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.57.1.11

f3GPSReceiverPortSelfSurveyProgress

This object provides information on the percentage of
fixes collected so far.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.57.1.12

f3GPSReceiverPortPPSGeneratedFlag

This object indicates whether there are enough usable satellites
to provide accurate PPS output.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.57.1.13

f3GPSReceiverPortGnssSystem

This object configure Constellation Type of the GPS
Antenna.

ConstellationTyper/w

Type Values:

1	gps-only
2	glonass-only
3	gps-and-glonass

.1.3.6.1.4.1.2544.1.12.4.1.57.1.14

f3GPSReceiverPortInstallationType

This object configure Installation Type of the GPS
Antenna.

InstallationTyper/w

Type Values:

1	full-sky-view
2	limited-sky-view

.1.3.6.1.4.1.2544.1.12.4.1.57.1.15

f3GPSReceiverPortGnssTOD

This object provides the last time was executed.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2544.1.12.4.1.57.1.16

f3GPSReceiverPortGnssSystemsBitMap

this object configures GNSS constellation types supported by a GNSS Receiver Port

ConstellationTypesBitMapr/w

Constraints:
range: 1-8

Type Values:

0	gps
1	glonass
2	beidou
3	galileo
4	sbas

.1.3.6.1.4.1.2544.1.12.4.1.57.1.17

f3GPSReceiverPortAlias

This object provides an alias to the GPS port

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.57.1.18

cmPethPsePortExtTable

table

.1.3.6.1.4.1.2544.1.12.4.1.58 · 1 row entry · 5 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmPethPsePortExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmPethPsePortExtTable'

A list of entries corresponding to PsePortExtEntry.

cmPethPsePortExtEntry row .1.3.6.1.4.1.2544.1.12.4.1.58.1

A conceptual row in the cmPethPsePortExtEntry.

Indexes

No indexes recorded

Column Syntax OID

cmPethPsePortExtGroupIndex

This object has the same value with the group index in pethPsePortTalbe.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.58.1.1

cmPethPsePortExtIndex

This object has the same value with the port index in pethPsePortTalbe.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.58.1.2

cmPethPsePortExtAssociatedPort

This object means the oid of associated physical port.

SNMPv2-TCVariablePointerr/w

Constraints:
range: 1-8

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.58.1.3

pethPsePortExtPowerConsumption

This object means the power consumption of each port in mWatts.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.58.1.4

pethPsePortExtAvailablePowerLevel

This object means the pse port available power level.

PsePowerLevelr/w

Type Values:

1	class1
2	class2
3	class0andclass3
4	class4

.1.3.6.1.4.1.2544.1.12.4.1.58.1.5

pethMainPseEXTTable

table

.1.3.6.1.4.1.2544.1.12.4.1.59 · 1 row entry · 2 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk pethMainPseEXTTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::pethMainPseEXTTable'

A list of entries corresponding to PethMainPseEXTEntry.

pethMainPseEXTEntry row .1.3.6.1.4.1.2544.1.12.4.1.59.1

A conceptual row in the pethMainPseEXTEntry.

Indexes

No indexes recorded

Column Syntax OID

pethMainPseExtGroupIndex

This object has the same value with the group index in pethMainPseEXTTable.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.59.1.1

pethMainPseExtNonStandardPD

disabled: don't support non-standard PD,
enabled: support non-standard PD

PSENonStandardPDr/w

Constraints:
range: 1-3

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2544.1.12.4.1.59.1.2

cmMPFlowTable

table

.1.3.6.1.4.1.2544.1.12.4.1.60 · 1 row entry · 13 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmMPFlowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmMPFlowTable'

A list of entries corresponding to MPFlow.

cmMPFlowEntry row .1.3.6.1.4.1.2544.1.12.4.1.60.1

A conceptual row in the cmMPFlowTable.

Indexes

No indexes recorded

Column Syntax OID

cmMPFlowIndex

An integer index value used to uniquely identify this MultiPointFlow.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.60.1.1

cmMPFlowCircuitName

This object allows SNMP management entities to provide a
circuit identifier with the MPFlow.

CM-COMMON-MIBF3DisplayStringr/w

Type Constraints:
range: 0..2047

.1.3.6.1.4.1.2544.1.12.4.1.60.1.2

cmMPFlowAdminState

This object represents the Administrative State of the Flow.

CM-COMMON-MIBAdminStater/w

Constraints:
range: 1-5

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.60.1.3

cmMPFlowOperationalState

This object represents the Operational State of the Flow.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.60.1.4

cmMPFlowSecondaryState

This object represents the Secondary State of the Flow.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.60.1.5

cmMPFlowLearningEnabled

DISABLED: The forwarding function of the Flow does not
dynamically learn MAC address to flowpoint mapping.
ENABLED: The forwarding function of the Flow dynamically
learns MAC address to flowpoint mapping based on ingr…

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-256

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.60.1.6

cmMPFlowAgingTimer

MAC Table Entry will be removed from the forwarding table
after an inactivity time represented by this entry.
Not used in EG-X.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.60.1.7

cmMPFlowFwdTableSizeProfileID

Profile ID for Maximum number of MAC Table Entries for the flow

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.60.1.8

cmMPFlowtableFullAction

Action on ingress frames when the number of MAC Table entires
has reached the maximum defined by tableSize.
BLOCK: A frame with a Source MAC address not in the MAC
Table will be discarded.
FORWARD: A frame with a Sourc…

LearningActionr/w

Type Values:

1	block
2	forward

.1.3.6.1.4.1.2544.1.12.4.1.60.1.9

cmMPFlowStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.60.1.10

cmMPFlowRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.60.1.11

cmMPFlowLearningConfigAction

This objects allows performing user action on Learning Table.

LearningConfigActionr/w

Type Values:

1	noAction
2	flushFwdTable
3	clearBlock
4	resetAgingTimer

.1.3.6.1.4.1.2544.1.12.4.1.60.1.12

cmMPFlowFPList

This object only used to display trap and Flow point list.
Fp will be add in the cmMPFlowMemberTable.

CM-COMMON-MIBF3DisplayStringr/w

Type Constraints:
range: 0..2047

.1.3.6.1.4.1.2544.1.12.4.1.60.1.13

cmMPFlowMemberTable

table

.1.3.6.1.4.1.2544.1.12.4.1.61 · 1 row entry · 2 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmMPFlowMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmMPFlowMemberTable'

A list of entries corresponding to MPFlowMember.

cmMPFlowMemberEntry row .1.3.6.1.4.1.2544.1.12.4.1.61.1

A conceptual row in the cmMPFlowMemberTable.

Indexes

No indexes recorded

Column Syntax OID

cmMPFlowMemberFPIndex

This object describes the relate Flow point.

SNMPv2-TCVariablePointer

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.61.1.1

cmMPFlowPointRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.61.1.2

cmEthernetTrafficPortPcpDEEncTable

table

.1.3.6.1.4.1.2544.1.12.4.1.62 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetTrafficPortPcpDEEncTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetTrafficPortPcpDEEncTable'

EthernetTraffic Port PCP drop eligibility encoding table. This
is applied to a frame that is egressing at the EthernetTraffic port.

cmEthernetTrafficPortPcpDEEncEntry row .1.3.6.1.4.1.2544.1.12.4.1.62.1

A conceptual row in the ethernetPBPcpDEEncPortTable.

Indexes

No indexes recorded

Column	Syntax	OID
cmEthernetTrafficPortPcpDEEncIndex An integer index value used to uniquely identify a row in the PCP drop eligible encoding table.	Integer32	`.1.3.6.1.4.1.2544.1.12.4.1.62.1.1`
cmEthernetTrafficPortPcpDEEncInPriority This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.62.1.2`
cmEthernetTrafficPortPcpDEEncDropIneligiblePrio This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.62.1.3`
cmEthernetTrafficPortPcpDEEncDropEligiblePrio This object is the PCP value that has a priority value with implicit drop eligibility encoded into it.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.62.1.4`

cmEthernetTrafficPortPcpDEDecTable

table

.1.3.6.1.4.1.2544.1.12.4.1.63 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetTrafficPortPcpDEDecTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetTrafficPortPcpDEDecTable'

EthernetTraffic Port PCP drop eligibility decoding table. This
is applied to a frame that is ingressing at a port.

cmEthernetTrafficPortPcpDEDecEntry row .1.3.6.1.4.1.2544.1.12.4.1.63.1

A conceptual row in the ethernetPBPcpDEDecPortTable.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetTrafficPortPcpDEDecIndex

An integer index value used to uniquely identify
a row in the PCP drop eligible decoding table.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.63.1.1

cmEthernetTrafficPortPcpDEDecInPriority

This object is the input priority that is decoded to get
priority and the drop eligibility of a frame.

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.63.1.2

cmEthernetTrafficPortPcpDEDecOutPriority

This object is the priority value decoded from a incoming PCP value.

CM-COMMON-MIBVlanPriorityr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.2544.1.12.4.1.63.1.3

cmEthernetTrafficPortPcpDEDecDropEligible

This object is the drop eligibility decoded from a incoming
PCP value.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.63.1.4

cmEthernetTrafficPortPcpDEPairTable

table

.1.3.6.1.4.1.2544.1.12.4.1.64 · 1 row entry · 3 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetTrafficPortPcpDEPairTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetTrafficPortPcpDEPairTable'

EthernetTraffic Port PCP drop eligibility priority pair table.
The priority pair is encoded to same drop eligibility and
drop ineligibility priority. Depending on the PCP DE Enc/Dec
mode there can be upto 3 pairs in the table. There will one
pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D.

cmEthernetTrafficPortPcpDEPairEntry row .1.3.6.1.4.1.2544.1.12.4.1.64.1

A conceptual row in the cmAccPortPcpDEPairEntry.

Indexes

No indexes recorded

Column	Syntax	OID
cmEthernetTrafficPortPcpDEPairIndex An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table.	Integer32	`.1.3.6.1.4.1.2544.1.12.4.1.64.1.1`
cmEthernetTrafficPortPcpDEDropIneligiblePrio This object is the drop ineligible priority.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.64.1.2`
cmEthernetTrafficPortPcpDEDropEligiblePrio This object is the drop eligible priority.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: `range: 0..7`	`.1.3.6.1.4.1.2544.1.12.4.1.64.1.3`

cmEthernetTrafficPortClbTable

table

.1.3.6.1.4.1.2544.1.12.4.1.65 · 1 row entry · 4 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetTrafficPortClbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetTrafficPortClbTable'

A list of entries corresponding to Ethernet Traffic Port 
Cable Length Benchmark.

cmEthernetTrafficPortClbEntry row .1.3.6.1.4.1.2544.1.12.4.1.65.1

A conceptual row in the cmEthernetTrafficPortClbTable.
These entries represent Cable Length Benchmarks
on the Ethernet Traffic Port.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetTrafficPortClbIndex

An integer index value used to uniquely identify
this Cable Length Benchmark Entry specification.

Integer32

.1.3.6.1.4.1.2544.1.12.4.1.65.1.1

cmEthernetTrafficPortClbEnabled

This enables specification of Cable Length Benchmark entry.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.65.1.2

cmEthernetTrafficPortClbLength

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.65.1.3

cmEthernetTrafficPortClbDescr

A textual string containing description of cable span.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.65.1.4

networkElementTMParamsTable

table

.1.3.6.1.4.1.2544.1.12.4.1.66 · 1 row entry · 2 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk networkElementTMParamsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::networkElementTMParamsTable'

Entries may be auto discovered, or can be explicitly created by 
SNMP Manager.  Each remotely discovered shelf is represented as 
a row in this table.

networkElementTMParamsEntry row .1.3.6.1.4.1.2544.1.12.4.1.66.1

A conceptual row in the networkElementTMParamsTable.

Indexes

No indexes recorded

Column Syntax OID

neTMParamsBandwidthProfileMode

A Network Element level Bandwidth Profile Mode shall be supported
which will indicate if the CIR/EIR is interpreted as Information Rate (IR)
or Line Rate (LR). In IR mode BWP is enforced based on number of bytes begin…

BandwidthProfileModer/w

Constraints:
range: 0-63

Type Values:

1	lineRate
2	informationRate

.1.3.6.1.4.1.2544.1.12.4.1.66.1.1

neTMParamsAgingtime

The object describe the system aging time.

SNMPv2-SMIInteger32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.4.1.66.1.2

cmEthernetAccPortJdsuExtTable

table

.1.3.6.1.4.1.2544.1.12.4.1.67 · 1 row entry · 2 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetAccPortJdsuExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetAccPortJdsuExtTable'

A list of entries corresponding to Ethernet Access Port 
Facilities for JDSU configuration purposes.

cmEthernetAccPortJdsuExtEntry row .1.3.6.1.4.1.2544.1.12.4.1.67.1

A conceptual row in the cmEthernetAccPortJdsuExtTable.

Indexes

cmPrioMapV2ProfileIndex cmPrioMapV2PrioMappingCOSIndex

Column Syntax OID

cmEthernetAccPortJDSUControlFramesSnoopingEnabled

Enabled: reaction/response to JDSU in-band loopback requests and hallo requests.
Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests.
FPGA shall not filter the JDSU control frames to pr…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.67.1.1

cmEthernetAccPortJDSULoopbackVlan

Applicable when port in JDSU VLAN loopback.

CM-COMMON-MIBVlanId

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.4.1.67.1.2

cmEthernetNetPortJdsuExtTable

table

.1.3.6.1.4.1.2544.1.12.4.1.68 · 1 row entry · 2 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetNetPortJdsuExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetNetPortJdsuExtTable'

A list of entries corresponding to Ethernet Network Port 
Facilities for JDSU configuration purposes.

cmEthernetNetPortJdsuExtEntry row .1.3.6.1.4.1.2544.1.12.4.1.68.1

A conceptual row in the cmEthernetNetPortJdsuExtTable.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetNetPortJDSUControlFramesSnoopingEnabled

SNMPv2-TCTruthValuer/w

Constraints:
range: 0-7

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.68.1.1

cmEthernetNetPortJDSULoopbackVlan

Applicable when port in JDSU VLAN loopback.

CM-COMMON-MIBVlanId

Constraints:
range: 0-7

.1.3.6.1.4.1.2544.1.12.4.1.68.1.2

cmEthernetTrafficPortLpbkTable

table

.1.3.6.1.4.1.2544.1.12.4.1.69 · 1 row entry · 8 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmEthernetTrafficPortLpbkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmEthernetTrafficPortLpbkTable'

A list of entries corresponding to Vlan loopback on
Ethernet Traffic Port.

cmEthernetTrafficPortLpbkEntry row .1.3.6.1.4.1.2544.1.12.4.1.69.1

A conceptual row in the cmEthernetTrafficPortLpbkTable.
These entries represent Vlan loopback
on the Ethernet Traffic Port.

Indexes

No indexes recorded

Column Syntax OID

cmEthernetTrafficPortLpbkIndex

An integer index value used to uniquely identify
this vlan loopback entry.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.69.1.1

cmEthernetTrafficPortLpbkInnerVlanEnabled

This object represent the inner vlan whether enabled.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.69.1.2

cmEthernetTrafficPortLpbkInnerVlanTag

This object represent the inner vlanid value and priority value.
The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7…

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.69.1.3

cmEthernetTrafficPortLpbkOuterVlanEnabled

This object represent the outter vlan whether enabled.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.69.1.4

cmEthernetTrafficPortLpbkOuterVlanTag

This object represent the outter vlanid value and priority value.
The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to …

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.69.1.5

cmEthernetTrafficPortLpbkTime

This object represent the vlan loopback time.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.69.1.6

cmEthernetTrafficPortLpbkStatus

This object represent the vlan loopback status.

CmLoopbackType

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.69.1.7

cmEthernetTrafficPortLpbkConfig

This object represent the vlan loopback action.

CmLoopbackTyper/w

Type Values:

1	lpbk-none
2	efm-oam-remote
3	efm-oam-remote-timed
4	facility-port
5	facility-port-timed
6	facility-vlan
7	terminal-port
8	terminal-port-timed
9	terminal-vlan
10	efm-oam-tailend
11	facility-payload
12	facility-payload-timed
13	remote-facility
14	remote-facility-payload
15	tailend-facility
16	tailend-facility-payload
17	terminal-itag
18	facility-itag
19	jdsu-terminal-port-tailend
20	jdsu-terminal-vlan-tailend
21	jdsu-facility-port-tailend
22	jdsu-facility-vlan-tailend
23	facility-och
24	facility-och-timed
25	terminal-och
26	terminal-och-timed

.1.3.6.1.4.1.2544.1.12.4.1.69.1.8

cmPrioMapV2ProfileTable

table

.1.3.6.1.4.1.2544.1.12.4.1.70 · 1 row entry · 9 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmPrioMapV2ProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmPrioMapV2ProfileTable'

A list of entries corresponding to Ethernet Priority Mappings V2 Profile.

cmPrioMapV2ProfileEntry row .1.3.6.1.4.1.2544.1.12.4.1.70.1

A conceptual row in the cmPrioMapV2ProfileTable.

Indexes

No indexes recorded

Column Syntax OID

cmPrioMapV2ProfileIndex

The integer index value describes the profile index.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.70.1.1

cmPrioMapV2ProfileAlias

The integer index value describes the profile alias.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.70.1.2

cmPrioMapV2ProfileMapModeType

The integer index value describes the profile PriorityMapMode.

CM-COMMON-MIBPriorityMapModer/w

Type Values:

1	priomap-none
2	priomap-tos
3	priomap-dscp
4	priomap-8021p
5	priomap-8021p-inner

.1.3.6.1.4.1.2544.1.12.4.1.70.1.3

cmPrioMapV2ProfileStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.70.1.4

cmPrioMapV2ProfileRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.70.1.5

cmPrioMapV2ProfileIngressCosPrioritydeprecated

This object is used to specify whether the profile
uses the inner-tag or the outer-tag in determining the COS (Class of Service).

CM-COMMON-MIBVlanTagTyper/w

Type Values:

1	inner-vlantag
2	outer-vlantag
3	n2a-priorityMapping
4	mplsLabel
5	vcLabel
6	encapOuterVlanTag

.1.3.6.1.4.1.2544.1.12.4.1.70.1.6

cmPrioMapV2ProfileCosMapModeType

This object is used to specify Cos mapping mode type.

CosMappingModer/w

Type Values:

1	ethernet
2	eompls
3	vxlan

.1.3.6.1.4.1.2544.1.12.4.1.70.1.7

cmPrioMapV2ProfileCosMapControl

This object is used to control whether has cmPrioMapV2PrioMappingCOSTable in profile.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.70.1.8

cmPrioMapV2ProfileDefaultCos

This object is used to specify the Default COS to be used when the
Ingress Priority Mapping function does not match.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.70.1.9

cmPrioMapV2IngressPrioMappingTable

table

.1.3.6.1.4.1.2544.1.12.4.1.71 · 1 row entry · 3 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmPrioMapV2IngressPrioMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmPrioMapV2IngressPrioMappingTable'

A list of entries corresponding to Ethernet Priority Mappings.

cmPrioMapV2IngressPrioMappingEntry row .1.3.6.1.4.1.2544.1.12.4.1.71.1

A conceptual row in the cmPrioMapV2IngressPrioMappingTable.

Indexes

No indexes recorded

Column	Syntax	OID
cmPrioMapV2IngressPrioMappingIndex The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2544.1.12.4.1.71.1.1`
cmPrioMapV2IngressPrioMappingInPriority The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63.	Integer32r/w	`.1.3.6.1.4.1.2544.1.12.4.1.71.1.2`
cmPrioMapV2IngressPrioMappingCOS This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow.	Integer32r/w	`.1.3.6.1.4.1.2544.1.12.4.1.71.1.3`

cmPrioMapV2PrioMappingCOSTable

table

.1.3.6.1.4.1.2544.1.12.4.1.72 · 1 row entry · 8 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmPrioMapV2PrioMappingCOSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmPrioMapV2PrioMappingCOSTable'

A list of entries corresponding to Ethernet Priority Mappings.

cmPrioMapV2PrioMappingCOSEntry row .1.3.6.1.4.1.2544.1.12.4.1.72.1

A conceptual row in the cmPrioMapV2PrioMappingCOSTable.

Indexes

No indexes recorded

Column	Syntax	OID
cmPrioMapV2PrioMappingCOSIndex The index of this entry.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2544.1.12.4.1.72.1.1`
cmPrioMapV2PrioMappingCOSValue This allows specification of the COS Value, i.e. this helps in determining the appropriate COS Policer for the Flow.	Integer32	`.1.3.6.1.4.1.2544.1.12.4.1.72.1.2`
cmPrioMapV2PrioMappingCOSOuterTagPri This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2544.1.12.4.1.72.1.3`
cmPrioMapV2PrioMappingCOSInnerTagPri This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2544.1.12.4.1.72.1.4`
cmPrioMapV2PrioMappingEncapOuterTagPriority This object allows configuring encapsulation outer tag priority value of ingress cos mapping.	Integer32r/w	`.1.3.6.1.4.1.2544.1.12.4.1.72.1.5`
cmPrioMapV2PrioMappingEncapInnerTagPriority This object allows configuring encapsulation inner tag priority value of ingress cos mapping.	Integer32r/w	`.1.3.6.1.4.1.2544.1.12.4.1.72.1.6`
cmPrioMapV2PrioMappingEncapOuterDscpValue This object allows configuring encapsulation outer DSCP value of ingress cos mapping.	Integer32r/w	`.1.3.6.1.4.1.2544.1.12.4.1.72.1.7`
cmPrioMapV2PrioMappingDscpValue This object allows configuring DSCP value of ingress cos mapping.	Integer32r/w	`.1.3.6.1.4.1.2544.1.12.4.1.72.1.8`

cmPrioMapV2PrioMappingPriTable

table

.1.3.6.1.4.1.2544.1.12.4.1.73 · 1 row entry · 5 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmPrioMapV2PrioMappingPriTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmPrioMapV2PrioMappingPriTable'

A list of entries corresponding to Ethernet Priority Mappings.

cmPrioMapV2PrioMappingPriEntry row .1.3.6.1.4.1.2544.1.12.4.1.73.1

A conceptual row in the cmPrioMapV2PrioMappingPriTable.

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-ENTITY-MIBf3UsbHostIndex

Column Syntax OID

cmPrioMapV2PrioMappingPriIndex

The integer index value corresponding to a priority value
based on the cmPrioMapV2ProfileMode.
In case of TOS and 8021P, valid indices are 1 to 8,
in case of DSCP, valid indices are 1 to 64.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.73.1.1

cmPrioMapV2PrioMappingPriInPrio

The integer index value corresponding to a priority value
based on the cmPrioMapV2ProfileMode.
In case of TOS and 8021P, valid indices are 0 to 7,
in case of DSCP, valid indices are 0 to 63.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.73.1.2

cmPrioMapV2PrioMappingPriPrioControl

This allows specification of whether the priority of
incoming X-TAG should be swapped with cmPrioMapV2XTagPriority.

PrioMapControlTyper/w

Type Values:

1	none
2	swap

.1.3.6.1.4.1.2544.1.12.4.1.73.1.3

cmPrioMapV2PrioMappingPriXTagPrio

This allows specification of the VLAN priority that
will replace the incoming X-TAG's priority. This is
applicable with cmPrioMapV2XTagControl as 'swap'.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.73.1.4

cmPrioMapV2PrioMappingPriCOS

This allows specification of the COS Priority, i.e.
this helps in determining the appropriate COS Policer for
the Flow.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.73.1.5

cmPrioMapV2ProfileAppliedObjTable

table

.1.3.6.1.4.1.2544.1.12.4.1.74 · 1 row entry · 1 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmPrioMapV2ProfileAppliedObjTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmPrioMapV2ProfileAppliedObjTable'

A list of entries corresponding to Ethernet Priority Mappings V2 Profile AppliedObj.

cmPrioMapV2ProfileAppliedObjEntry row .1.3.6.1.4.1.2544.1.12.4.1.74.1

A conceptual row in the cmPrioMapV2ProfileAppliedObjTable.

Indexes

No indexes recorded

Column	Syntax	OID
cmPrioMapV2ProfileAppliedObj The object describe the profile Applied to. It maybe the access port or network port or flow etc.	SNMPv2-TCVariablePointer Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	`.1.3.6.1.4.1.2544.1.12.4.1.74.1.1`

cmAccPortExtTable

table

.1.3.6.1.4.1.2544.1.12.4.1.75 · 1 row entry · 10 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmAccPortExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmAccPortExtTable'

A list of entries corresponding to Access Port for configuration purposes.

cmAccPortExtEntry row .1.3.6.1.4.1.2544.1.12.4.1.75.1

A conceptual row in the cmAccPortExtTable.

Indexes

No indexes recorded

Column Syntax OID

cmAccPortExtMcastRateLimitEnabled

Whether multicast packets need be limited on this port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.75.1.1

cmAccPortExtMcastRateLimitSpeedLo

The rate limiting for multicast packets per port
When cmAccPortExtMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.75.1.2

cmAccPortExtMcastRateLimitSpeedHi

The rate limiting for multicast packets per port
When cmAccPortExtMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.75.1.3

cmAccPortExtBcastRateLimitEnabled

Whether broadcast packets need be limited per port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.75.1.4

cmAccPortExtBcastRateLimitSpeedLo

The rate limiting for broadcast packets per port
When cmAccPortExtBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.75.1.5

cmAccPortExtBcastRateLimitSpeedHi

The rate limiting for broadcast packets per port
When cmAccPortExtBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.75.1.6

cmAccPortExtCombinedRateLimitEnabled

Whether multicast and broadcast packets need be limited per port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.75.1.7

cmAccPortExtCombinedRateLimitSpeedLo

The rate limiting for multicast and broadcast packets per port.
This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.75.1.8

cmAccPortExtCombinedRateLimitSpeedHi

The rate limiting for multicast and broadcast packets per port.
This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.75.1.9

cmAccPortExtRefPrioMapProfile

This object allows to set priority map profile.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.75.1.10

cmNetPortExtTable

table

.1.3.6.1.4.1.2544.1.12.4.1.76 · 1 row entry · 10 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk cmNetPortExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::cmNetPortExtTable'

A list of entries corresponding to Network Port for configuration purposes.

cmNetPortExtEntry row .1.3.6.1.4.1.2544.1.12.4.1.76.1

A conceptual row in the cmNetPortExtTable.

Indexes

No indexes recorded

Column Syntax OID

cmNetPortExtMcastRateLimitEnabled

Whether multicast packets need be limited on this port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.76.1.1

cmNetPortExtMcastRateLimitSpeedLo

The rate limiting for multicast packets per port
When cmNetPortExtMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.76.1.2

cmNetPortExtMcastRateLimitSpeedHi

The rate limiting for multicast packets per port
When cmNetPortExtMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.76.1.3

cmNetPortExtBcastRateLimitEnabled

Whether broadcast packets need be limited per port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.76.1.4

cmNetPortExtBcastRateLimitSpeedLo

The rate limiting for broadcast packets per port
When cmNetPortExtBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.76.1.5

cmNetPortExtBcastRateLimitSpeedHi

The rate limiting for broadcast packets per port
When cmNetPortExtBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.

This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.76.1.6

cmNetPortExtCombinedRateLimitEnabled

Whether multicast and broadcast packets need be limited per port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2544.1.12.4.1.76.1.7

cmNetPortExtCombinedRateLimitSpeedLo

The rate limiting for multicast and broadcast packets per port.
This objects only represents low 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.76.1.8

cmNetPortExtCombinedRateLimitSpeedHi

The rate limiting for multicast and broadcast packets per port.
This objects only represents high 32 bits.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2544.1.12.4.1.76.1.9

cmNetPortExtRefPrioMapProfile

This object allows to set priority map profile.

SNMPv2-TCVariablePointerr/w

Description:

A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.

.1.3.6.1.4.1.2544.1.12.4.1.76.1.10

f3UsbWIFIDonglePortTable

table

.1.3.6.1.4.1.2544.1.12.4.1.77 · 1 row entry · 17 columns

Open in standard view

Uses the adva variant from /opt/observium/mibs/adva.

Command help

Walk f3UsbWIFIDonglePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-FACILITY-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-FACILITY-MIB::f3UsbWIFIDonglePortTable'

A list of entries corresponding to wifi dongle Port for configuration purposes.

f3UsbWIFIDonglePortEntry row .1.3.6.1.4.1.2544.1.12.4.1.77.1

A conceptual row in the f3UsbWIFIDonglePortTable.

Indexes

No indexes recorded

Column Syntax OID

f3UsbWIFIDonglePortIndex

An integer index value used to uniquely identify WIFI dongle port.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.77.1.1

f3UsbWIFIDonglePortIfIndex

This object has the same value as ifIndex for WIFI dongle Port.
An integer index value used to uniquely identify this Port

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.2544.1.12.4.1.77.1.2

f3UsbWIFIDonglePortEntityIndex

Entity Index from ENTITY-MIB for this port.

ENTITY-MIBPhysicalIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.2544.1.12.4.1.77.1.3

f3UsbWIFIDonglePortAdminState

This object represents the Administrative State of this Port.

CM-COMMON-MIBAdminStater/w

Type Values:

1	in-service
2	management
3	maintenance
4	disabled
5	unassigned
6	monitored

.1.3.6.1.4.1.2544.1.12.4.1.77.1.4

f3UsbWIFIDonglePortOperationalState

This object represents the Operational State of this Port.

CM-COMMON-MIBOperationalState

Type Values:

1	normal
2	outage

.1.3.6.1.4.1.2544.1.12.4.1.77.1.5

f3UsbWIFIDonglePortSecondaryState

This object represents the Secondary State of this Port.

CM-COMMON-MIBSecondaryState

Type Values:

0	not-applicable
1	active
2	automaticinservice
3	facilityfailure
4	fault
5	loopback
6	maintenance
7	mismatchedeqpt
8	standbyhot
9	supportingentityoutage
10	unassigned
11	unequipped
12	disabled
13	forcedoffline
14	initializing
15	prtcl
16	blckd
17	mon-tx
18	mir-rx
19	cema
20	lkdo

.1.3.6.1.4.1.2544.1.12.4.1.77.1.6

f3UsbWIFIDonglePortSSID

This object represents the SSID value of this port.

OctetStringr/w

.1.3.6.1.4.1.2544.1.12.4.1.77.1.7

f3UsbWIFIDonglePortPassword

This object represents the password value of this SSID.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.77.1.8

f3UsbWIFIDonglePortEncryption

The encryption type of this port.

WIFIEncryptionTyper/w

Type Values:

0	notApplicable
1	wpa-psk
2	wpa2-psk
3	wpa-wpa2-psk

.1.3.6.1.4.1.2544.1.12.4.1.77.1.9

f3UsbWIFIDonglePortIPAddress

The IP address of this port.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.77.1.10

f3UsbWIFIDonglePortwWIFIIPNetMask

The IP address mask of this port.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.77.1.11

f3UsbWIFIDonglePortWIFIDHCPRole

The DHCP role type of this port.

DHCPType

Type Values:

1	client
2	server

.1.3.6.1.4.1.2544.1.12.4.1.77.1.12

f3UsbWIFIDonglePortWIFIAllocatedIPFrom

The start IP address could be allocated.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.77.1.13

f3UsbWIFIDonglePortWIFIAllocatedIPEnd

The last IP address could be allocated.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.2544.1.12.4.1.77.1.14

f3UsbWIFIDonglePortStorageType

The type of storage configured for this entry.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

.1.3.6.1.4.1.2544.1.12.4.1.77.1.15

f3UsbWIFIDonglePortRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2544.1.12.4.1.77.1.16

f3UsbWIFIDonglePortAccessdUsers

The users list of accessed via WIFI dongle port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2544.1.12.4.1.77.1.17