cmFlowPointBcastRateLimitSpeedLo

CM-FACILITY-MIB · .1.3.6.1.4.1.2544.1.12.4.1.29.1.30
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
The rate limiting for broadcast packets per FP
When cmFlowPointBcastRateLimitEnabled and the value is 0, 
it means all multicast frame are dropped.
              
This objects only represents low 32 bits.

Context

MIB
CM-FACILITY-MIB
OID
.1.3.6.1.4.1.2544.1.12.4.1.29.1.30
Type
column
Access
readwrite
Status
current
Parent
cmFlowPointEntry
Table
cmFlowPointTable
Siblings
43

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmFlowPointIndex
The integer index value corresponding to an FlowPoint.
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.29.1.1
cmFlowPointVlanMemberAction
This object allows to add or remove the VLAN members specified by cmFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in…
columnFlowVlanActionType.1.3.6.1.4.1.2544.1.12.4.1.29.1.10
cmFlowPointVlanMemberActionVlan
This object allows adding/removing VLAN members to a flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form …
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.29.1.11
cmFlowPointIngressUntaggedFrameEnabled
This object allows to specify whether or not the flowpoint supports untagged frame.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.29.1.12
cmFlowPointCTagControl
This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', th…
columnFlowTagControl.1.3.6.1.4.1.2544.1.12.4.1.29.1.13
cmFlowPointCTagVlanId
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and…
columnCM-COMMON-MIBVlanId.1.3.6.1.4.1.2544.1.12.4.1.29.1.14
cmFlowPointCTagVlanPriority
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' contr…
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.4.1.29.1.15
cmFlowPointSTagControl
This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', th…
columnFlowTagControl.1.3.6.1.4.1.2544.1.12.4.1.29.1.16
cmFlowPointSTagVlanId
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and…
columnCM-COMMON-MIBVlanId.1.3.6.1.4.1.2544.1.12.4.1.29.1.17
cmFlowPointSTagVlanPriority
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' contr…
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.4.1.29.1.18
cmFlowPointEgressOuterTagPrioMapEnabled
This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled,it indicates that the operation specified in the EgressPrioMapTable woul…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.29.1.19
cmFlowPointCircuitName
This object allows SNMP management entities to provide a circuit identifier with the FlowPoint.
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.29.1.2
cmFlowPointColorMarkingSupported
This object defines the egress color marking. If set to Enabled, the DEI bit of S-tag pushed will be remarked according the meter result. If set to Disabled, the DEI bit is force…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.29.1.20
cmFlowPointAssociatedAclProfile
This object provides the association of an Flow with an ACL profile.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.4.1.29.1.21
cmFlowPointSESFramesLossThresholdRatio
This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpo…
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.29.1.22
cmFlowPointStorageType
The type of storage configured for this entry.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.2544.1.12.4.1.29.1.23
cmFlowPointRowStatus
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writ…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.12.4.1.29.1.24
cmFlowPointDefaultMemberEnabled
defaultMemberEnabled with enabled means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagge…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.29.1.25
cmFlowPointMcastRateLimitEnabled
Whether multicast packets need be limited per FP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.29.1.26
cmFlowPointMcastRateLimitSpeedLo
The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects onl…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.29.1.27
cmFlowPointMcastRateLimitSpeedHi
The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects onl…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.29.1.28
cmFlowPointBcastRateLimitEnabled
Whether broadcast packets need be limited per FP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.29.1.29
cmFlowPointAdminState
This object represents the Administrative State of the FlowPoint.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.4.1.29.1.3
cmFlowPointBcastRateLimitSpeedHi
The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects onl…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.29.1.31
cmFlowPointSplitHorizonGroupOID
Specifies the Split-Horizon Group EID. If there is no SHG, the value is none.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.4.1.29.1.32
cmFlowPointLoopAvoidance
EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.4.1.29.1.33
cmFlowPointHierarchicalCosEnabled
Enable or Disable Hierarchical COS shaping (flow shaping).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.29.1.34
cmFlowPointWfqQid
This attribute description the WFQ Qid.
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.29.1.35
cmFlowPointWfqOutPriority
This attribute description the WFQ out priority.
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.29.1.36
cmFlowPointMaximumBWLo
This attribute description the flow point maximum bandwidth. This objects only represents low 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.29.1.37
cmFlowPointMaximumBWHi
This attribute description the flow point maximum bandwidth. This objects only represents high 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.29.1.38
cmFlowPointGuaranteedBWLo
This attribute description the flow point guaranteed bandwidth. This objects only represents low 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.29.1.39
cmFlowPointOperationalState
This object represents the Operational State of the FlowPoint.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.4.1.29.1.4
cmFlowPointGuaranteedBWHi
This attribute description the flow point guaranteed bandwidth. This objects only represents high 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.29.1.40
cmFlowPointRefPrioMapProfile
This object allows to set priority map profile.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.4.1.29.1.41
cmFlowPointMcastAndBcastRateLimitEnabled
Whether multicast packets and broadcast packets need be limited per FP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.29.1.42
cmFlowPointMcastAndBcastRateLimitSpeedLo
The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.29.1.43
cmFlowPointMcastAndBcastRateLimitSpeedHi
The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.29.1.44
cmFlowPointSecondaryState
This object represents the Secondary State of the FlowPoint.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.4.1.29.1.5
cmFlowPointAssociatedFlowId
This object provides the association of an Flow with an FlowPoint.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.4.1.29.1.6
cmFlowPointIngressMultiCOS
This object allows specification of ingress multiple COS (Class of Service) FlowPoint.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.29.1.7
cmFlowPointIngressCOS
This object allows specification of ingress COS (Class of Service) FlowPoint.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.4.1.29.1.8
cmFlowPointIngressVlanMemberList
It allows specification of VLAN members of the FlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be…
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.29.1.9