e1t1LineBuildOut
CM-FACILITY-MIB ·
.1.3.6.1.4.1.2544.1.12.4.1.50.1.17
Object
column
r/w
LineBuildOut
This object represents Line Build Out on E1/T1 port.
Context
- MIB
- CM-FACILITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.4.1.50.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- e1t1Entry
- Table
- e1t1Table
- Siblings
- 21
Syntax
LineBuildOut
- Source
- LineBuildOut
- Base type
Enumeration
Values & Constraints
Type Values
0 | none |
1 | lbo-0-133ft |
2 | lbo-133-266ft |
3 | lbo-266-399ft |
4 | lbo-399-533ft |
5 | lbo-533-655ft |
6 | lbo-7dot5db |
7 | lbo-15db |
8 | lbo-22dot5db |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| e1t1ParentIfIndex This object represents the parent (container) object's interface index.
In the case when parent of E1T1Entry does not have a InterfaceIndex
then the e1t1ParentIfIndex shall have … | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2544.1.12.4.1.50.1.1 |
| e1t1LoopbackTime This object allows to specify time for timed-loopbacks on
on the E1/T1. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.50.1.10 |
| e1t1RemoteLoopbackRequest This object allows to specify to repond the remote loopback request or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.50.1.11 |
| e1t1InsertingAIS This object allows to insert AIS out from E1/T1
when it is in maintenance state. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.50.1.12 |
| e1t1RowStatus The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.4.1.50.1.13 |
| e1t1LineType This object represents the E1/T1 Line Type.
Determines whether the E1/T1 interface operates in T1 or E1 mode. | column | E1T1LineType | .1.3.6.1.4.1.2544.1.12.4.1.50.1.14 |
| e1t1LineCode This object represents the E1/T1 Port Line Code.
When the port is configured for a Line Type of T1,
the valid values are t1-b8zs and t1-ami and the default value
is t1-b8zs. When… | column | E1T1LineCode | .1.3.6.1.4.1.2544.1.12.4.1.50.1.15 |
| e1t1FrameFormat This object represents the E1/T1 Port Frame Format.
When the port is configured for a Line Type of T1, the
valid values are t1-sf, t1-esf and t1-unframed and the default
value is… | column | E1T1FrameFormat | .1.3.6.1.4.1.2544.1.12.4.1.50.1.16 |
| e1t1TimingDomain This object represents Timing Domain that the E1/T1 interface uses as
timing source. The Timing Domain is a Synchronization Entity
represented by an object in the f3SyncTable | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.50.1.18 |
| e1t1RcvSensitivity This object allows configuring the reciever sensitivity based on expected
signal strength | column | E1T1RcvSensitivity | .1.3.6.1.4.1.2544.1.12.4.1.50.1.19 |
| e1t1Index Index value used to uniquely identify
this E1/T1 interface, within the parent container specified by
e1t1ParentIfIndex. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.50.1.2 |
| e1t1IdlePatternProfile This object allows selecting Idle Pattern Profile for the E1/T1 interface.
Idle Patter Profile is represented by an object in the
f3Pwe3IdlePatternProfileTable | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.50.1.20 |
| e1t1LoopbackProfile This object allows selecting Loopback Profile for the E1/T1 interface.
Loopback Profile is represented by an object in the
f3Pwe3LoopbackProfileTable | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.50.1.21 |
| e1t1RelatedContainerId This object describes the related container VCG. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.50.1.22 |
| e1t1IfIndex This object has the same value as ifIndex for E1/T1.
An integer index value used to uniquely identify
this E1/T1 interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2544.1.12.4.1.50.1.3 |
| e1t1EntityIndex Entity Index from ENTITY-MIB for this port. | column | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.2544.1.12.4.1.50.1.4 |
| e1t1AdminState This object represents the Administrative State of the E1/T1. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.4.1.50.1.5 |
| e1t1OperationalState This object represents the Operational State of the E1/T1. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.4.1.50.1.6 |
| e1t1SecondaryState This object represents the Secondary State of the E1/T1. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.4.1.50.1.7 |
| e1t1LoopbackConfig This object allows to initiate loopbacks on
on the E1/T1. | column | CmLoopbackType | .1.3.6.1.4.1.2544.1.12.4.1.50.1.8 |
| e1t1LoopbackStatus This object provides status of the current loopback
on the E1/T1. | column | CmLoopbackType | .1.3.6.1.4.1.2544.1.12.4.1.50.1.9 |