cmFlowN2ACIR
CM-FACILITY-MIB ·
.1.3.6.1.4.1.2544.1.12.4.1.4.1.11
Object
This object represents the Commited Information
Rate(CIR) of an Flow in the Network to Access (N2A) direction.
For a portbased Flow, this object is not settable. This is
only settable if cmFlowN2ARateLimitingEnabled is enabled.
In case of Tranparent Flow this object represents N2 to N1 CIR.
Context
- MIB
- CM-FACILITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.4.1.4.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cmFlowEntry
- Table
- cmFlowTable
- Siblings
- 69
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmFlowIndex The integer index value corresponding to an Ethernet Flow. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.1 |
| cmFlowN2ARateLimitingEnabled This object allows management of the N2A rate limiting,
independent of A2N rate limiting. When not enabled,
N2A specification is the same as A2N.
This object is not… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.10 |
| cmFlowN2AEIR This object represents the Excess Information
Rate(CIR) of an Flow in the Network to Access (N2A) direction.
For a portbased Flow, this object is not settable. This is
only setta… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.12 |
| cmFlowStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.4.1.4.1.13 |
| cmFlowRowStatus The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.4.1.4.1.14 |
| cmFlowTrafficType This object provides information on the type of traffic flow
supported by the system, i.e.'shaped-only' flows (support
only shaping) or 'policed-shaped' (support policing and sha… | column | FlowTrafficType | .1.3.6.1.4.1.2544.1.12.4.1.4.1.15 |
| cmFlowCOS This object allows specification of the COS (Class of Service)
value for the Traffic Flow. This value is used at flow creation
time to identify the COS level of the A2N and N2A sh… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.16 |
| cmFlowVlanMemberList This object is applicable only when Port is in connection-oriented
evpl mode. This attribute is mandatory if creation of
connection-oriented evpl regular flow is desired.
It allow… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.4.1.17 |
| cmFlowAction This object is applicable only when Port is in connection-oriented
evpl mode and the cmFlowType is regular. This object allows to
add or remove the VLAN members specified by
cmFl… | column | FlowVlanActionType | .1.3.6.1.4.1.2544.1.12.4.1.4.1.18 |
| cmFlowActionVlan This object is applicable only when Port is in connection-oriented
evpl mode. This object allows adding/removing VLAN members
to a connection-oriented evpl regular flow.
VLAN memb… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.4.1.19 |
| cmFlowCircuitName This object allows SNMP management entities to provide a
circuit identifier with the Flow. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.4.1.2 |
| cmFlowUntaggedMemberEnabled This object is applicable only when Port is in connection-oriented
evpl mode for a regular flow as well as default flow.
This object allows to specify whether or not the flow
su… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.20 |
| cmFlowA2NCIRHi This object represents the Commited Information
Rate(CIR) of an Flow in the Access to Network (A2N) direction.
This value represents the upper 32 bits of CIR (lower is
provided … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.21 |
| cmFlowA2NEIRHi This object represents the Excess Information
Rate(EIR) on an Flow in the Access to Network (A2N) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settab… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.22 |
| cmFlowN2ACIRHi This object represents the Commited Information
Rate(CIR) of an Flow in the Network to Access (N2A) direction.
This value represents the upper 32 bits of CIR (lower is
provided … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.23 |
| cmFlowN2AEIRHi This object represents the Excess Information
Rate(EIR) on an Flow in the Network to Access (N2A) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settab… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.24 |
| cmFlowHCOSMgmtEnabled This object allows management of Hierarchical COS on the Flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.25 |
| cmFlowGuaranteedA2NBandwidthLo This object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
guarante… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.26 |
| cmFlowGuaranteedA2NBandwidthHi This object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
guarante… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.27 |
| cmFlowMaximumA2NBandwidthLo This object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
maximum … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.28 |
| cmFlowMaximumA2NBandwidthHi This object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
maximum … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.29 |
| cmFlowAdminState This object represents the Administrative State of the Flow. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.4.1.4.1.3 |
| cmFlowCTagControl This object allows specification of the tag management
operation on the C-TAG. Supported types are 'push', 'pushvid',
'swapvid' and 'none'. If the type is 'push',
the VLAN Id (… | column | FlowTagControl | .1.3.6.1.4.1.2544.1.12.4.1.4.1.30 |
| cmFlowCTagVlanId This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of cmFlowCTagControl.
It is applicable for 'push', 'swapvid' and 'pushvid'
control type… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.4.1.4.1.31 |
| cmFlowCTagVlanPriority This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of cmFlowCTagControl.
It is applicable for 'push' control type.
Th… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.4.1.4.1.32 |
| cmFlowCTagMatchRxPrio This object is used to specify whether the C-TAG priority
be used or ignored for traffic in the N2A direction.
This is only applicable if cmFlowCTagControl
is 'push'.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.33 |
| cmFlowSTagControl This object allows specification of the tag management
operation on the S-TAG. Supported types are 'push', 'swapvid', and 'none'.
If the type is 'push', the VLAN Id (cmFlowSTagV… | column | FlowTagControl | .1.3.6.1.4.1.2544.1.12.4.1.4.1.34 |
| cmFlowSTagVlanId This object allows specification of the VLAN Id to
be pushed, based on the value of cmFlowSTagControl.
It is applicable for 'push' control type.
This object is not … | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.4.1.4.1.35 |
| cmFlowSTagVlanPriority This object allows specification of the VLAN Priority to
be pushed, based on the value of cmFlowSTagControl.
It is applicable for 'push' control type.
This object i… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.4.1.4.1.36 |
| cmFlowOuterTagPrioEnabled This object is used to specify whether the flow
participates in outer-tag priority swap. The Priority
Mapping Table cmPrioMapTable allows the A2N outer-tag
priority to be specif… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.37 |
| cmFlowN2ACOSPriorityTagType This object is used to specify whether the flow
uses the inner-tag or the outer-tag in determining the COS (Class of Service) in the
N2A direction. This object is applicable in t… | column | CM-COMMON-MIBVlanTagType | .1.3.6.1.4.1.2544.1.12.4.1.4.1.38 |
| cmFlowESFramesLossThreshold This object is used to specify the number of frames lost
per flow that starts counting Errored Seconds (ES) on the flow.
This functionality is applicable if the flow is monitored
… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.39 |
| cmFlowOperationalState This object represents the Operational State of the Flow. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.4.1.4.1.4 |
| cmFlowSESFramesLossThresholdRatio This object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the flow.
This functionality is applicable if the flow is mon… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.40 |
| cmFlowPolicingEnabled This object is applicable only when Port is in connection-oriented mode.
This object is applicable to both epl and evpl mode flows.
This object allows to enable/disable the polic… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.41 |
| cmFlowPreserveSTagProperties This object is applicable only when Port is in connection-oriented mode.
This object is applicable to evpl mode Regular flows, when S-TAG control
is specified as SWAPVID.
When ena… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.42 |
| cmFlowInnerTagPrioEnabled This object is used to specify whether the flow
participates in inner-tag (second) priority swap. The Priority
Mapping Table cmPrioMapTable allows the A2N inner-tag
priority to … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.43 |
| cmFlowN2AOuterTagPrioEnabled This object is used to specify whether the flow
participates in outer-tag priority swap in the A2N direction.
The Priority Mapping Table cmNetPortPrioMapTable allows the N2A outer… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.44 |
| cmFlowA2NShapingType This object is used to specify whether the traffic in A2N direction
passing through this flow is shaped by port-level or flow-level Shapers.
In case of portbased flows the value o… | column | ShapingType | .1.3.6.1.4.1.2544.1.12.4.1.4.1.45 |
| cmFlowN2AShapingType This object is used to specify whether the traffic in N2A direction
passing through this flow is shaped by port-level or flow-level Shapers.
In case of portbased flows the value o… | column | ShapingType | .1.3.6.1.4.1.2544.1.12.4.1.4.1.46 |
| cmFlowSTagMatchRxPrio This object indicates whether the S-TAG priority
is used or ignored for traffic in the N2A direction.
This is only applicable if cmFlowSTagControl
is 'push'.
This… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.47 |
| cmFlowAutoBandwidthConfigEnabled This object is applicable for Flows on the PWE3 Ethernet Backplane Port.
When set to TRUE bandwidth of this Flow will be automatically adjusted when
PWE3 SATOPs are provisioned. T… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.48 |
| cmFlowPort1 This object specifies a physical or logical port on the Access side of the
Flow. This can be Access Port, Access LAG or Access Split Horizion Group.
In case of Tra… | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.4.1.49 |
| cmFlowSecondaryState This object represents the Secondary State of the Flow. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.4.1.4.1.5 |
| cmFlowPort2 This object specifies a physical or logical port on the Network side of the
Flow. This can be Network Port, Network LAG, Network Split Horizion Group
ERP or Protection Group.
… | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.4.1.50 |
| cmFlowPolicingControl This object specifies the direction(s) in which Poling is enabled on traffic
within this Flow when cmFlowPolicingEnabled is TRUE. | column | PolicingControl | .1.3.6.1.4.1.2544.1.12.4.1.4.1.51 |
| cmFlowAutoCIRPercentage This object specifies the percentage of available CIR on the Network
ports assigned to this Flow when cmFlowAutoBandwidthConfigEnabled is TRUE.
The flow guaranteedBW is set to … | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.52 |
| cmFlowLoopAvoidanceObject This object specifies the Loop Avoidance instance to which this Flow belongs.
This object is appicable only for Transparent Flow and should point to the
ERP instance for which thi… | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.4.1.53 |
| cmFlowConfigType This object specifies if this Flow is an Access Flow or Pass-thru Flow. | column | FlowConfigType | .1.3.6.1.4.1.2544.1.12.4.1.4.1.54 |
| cmFlowN2NForwardingEnabled This object is used to specify whether n2n forwarding
is enabled on particular Flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.55 |
| cmFlowA2NMulticastRateLimitControl Whether multicast frames are limited per Flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.56 |
| cmFlowA2NMulticastRateLimitLo The rate limit for multicast packets per Flow.
When cmFlowA2NMulticastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object re… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.57 |
| cmFlowA2NMulticastRateLimitHi The rate limit for multicast packets per Flow.
When cmFlowA2NMulticastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object re… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.58 |
| cmFlowA2NBroadcastRateLimitControl Whether broadcast frames are limited per Flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.59 |
| cmFlowType This object represents the type of the Flow. | column | CmFlowType | .1.3.6.1.4.1.2544.1.12.4.1.4.1.6 |
| cmFlowA2NBroadcastRateLimitLo The rate limit for multicast packets per Flow.
When cmFlowA2NBroadcastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object re… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.60 |
| cmFlowA2NBroadcastRateLimitHi The rate limit for multicast packets per Flow.
When cmFlowA2NBroadcastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object re… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.61 |
| cmFlowA2NCombinedRateLimitControl Whether both multicast and broadcast frames are limited per Flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.62 |
| cmFlowA2NCombinedRateLimitLo The rate limit for multicast packets per Flow.
When cmFlowA2NCombinedRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object rep… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.63 |
| cmFlowA2NCombinedRateLimitHi The rate limit for multicast packets per Flow.
When cmFlowA2NCombinedRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object rep… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.64 |
| cmFlowRefPrioMapProfile This object used to specify the flow's profile. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.4.1.65 |
| cmFlowRefEoMplsPwObject This object specifies EoMpls Pw object OID. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.4.1.66 |
| cmFlowRefN2APrioMapProfile This object used to specify the flow's N2A direction profile. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.4.1.67 |
| cmFlowSecureBlockingEnabled This object can be used to enable/disable secure block. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.68 |
| cmFlowRefConnectGuardFlowList This object specifies the secure flow list,
it should be f3ConnectGuardFlowIndex value list split with comma. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.4.1.4.1.69 |
| cmFlowMultiCOS This object allows specification of multiple COS (Class of Service)
Flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.4.1.7 |
| cmFlowSecureStateList This object specifies the secure state list,
it should be secure state value list and split with comma. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.4.1.4.1.70 |
| cmFlowA2NCIR This object represents the Commited Information
Rate(CIR) of an Flow in the Access to Network (A2N) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not setta… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.8 |
| cmFlowA2NEIR This object represents the Excess Information
Rate(EIR) on an Flow in the Access to Network (A2N) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settab… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.4.1.9 |