bitsPortImpedance
CM-FACILITY-MIB ·
.1.3.6.1.4.1.2544.1.12.4.1.16.1.20
Object
column
BitsPortImpedanceMode
This object provides the impedance mode for the BITS-OUT port.
Context
- MIB
- CM-FACILITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.4.1.16.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- bitsPortEntry
- Table
- bitsPortTable
- Siblings
- 19
Syntax
BitsPortImpedanceMode
- Source
- BitsPortImpedanceMode
- Base type
Enumeration
Values & Constraints
Type Values
1 | bits-120Ohm |
2 | bits-100Ohm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bitsPortTypeIndex An integer index value used to uniquely identify
this BITS Port within the card. Value 1 stands for
BITS-IN, 2 for BITS-OUT. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.16.1.1 |
| bitsPortLineCode This object represents the BITS Port Line Code.
When the port is configured for a Line Type of T1,
the valid values are t1-b8zs and t1-ami and the default value
is t1-b8zs. When … | column | BitsPortLineCode | .1.3.6.1.4.1.2544.1.12.4.1.16.1.10 |
| bitsPortFrameFormat This object represents the BITS Port Frame Format.
When the port is configured for a Line Type of T1, the
valid values are t1-sf and t1-esf and the default value is t1-esf.
When t… | column | BitsFrameFormat | .1.3.6.1.4.1.2544.1.12.4.1.16.1.11 |
| bitsPortSaBitDesignation This object represents the BITS Port Sa Bit Designation.
Determines which E1 Sa Bit is used to transmit/receive the SSM.
For T1 and 2048khz Line Types, the only allowed value is … | column | SaBitDesignation | .1.3.6.1.4.1.2544.1.12.4.1.16.1.12 |
| bitsPortQLModeEnabled This object allows to specify whether the BITS Port
can be enabled/disabled for QL Mode.
When enabled, on receive side
-port shall PEER the SSM (Sync Status Messages) slow pr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.16.1.13 |
| bitsPortExpectedQL This object allows to specify the expected QL when the
BITS Port is enabled for QL Mode.
This object allows the user to set a minimum
expected received Quality Level on the port… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.16.1.14 |
| bitsPortAssumedQL This object allows to specify the assumed QL on the
BITS Port. The Assumed QL is only meaningful if the
Network Clock Type (see fsp150cm-sync.mib) is option1 and the
port's QL… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.16.1.15 |
| bitsPortReceivedQL This object provides the Received QL value for the BITS port.
If the BITS port's QL Mode is disabled, then the received
QL value is not applicable. | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.16.1.16 |
| bitsPortTransmitQL This object provides the Transmitted QL value for the BITS port.
If the BITS port's QL Mode is disabled, then the received
QL value is not applicable. | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.16.1.17 |
| bitsPortSquelchQL This object allows to set the Squelch QL for the BITS-OUT port.
The Squelch QL is only meaningful if the QL Mode is Enabled.
The Squelch QL is used to determine whether or not t… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.16.1.18 |
| bitsPortLineBuildOut This object allows to manage the line build out on the BITS-OUT port when
the Line Type is T1. | column | LineBuildOut | .1.3.6.1.4.1.2544.1.12.4.1.16.1.19 |
| bitsPortIndex An integer index value used to uniquely identify
this BITS Port within the card.
Note that each BITs Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, bi… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.16.1.2 |
| bitsPortIfIndex This object has the same value as ifIndex for
Bits Port. An integer index value used to
uniquely identify this Bits Port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2544.1.12.4.1.16.1.3 |
| bitsPortEntityIndex Entity Index from ENTITY-MIB for this port. | column | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.2544.1.12.4.1.16.1.4 |
| bitsPortAdminState This object represents the Administrative State of the BITS
Port. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.4.1.16.1.5 |
| bitsPortOperationalState This object represents the Operational State of the BITS
Port. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.4.1.16.1.6 |
| bitsPortSecondaryState This object represents the Secondary State of the BITS
Port. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.4.1.16.1.7 |
| bitsPortType This object represents the BITS Port Type. | column | BitsPortType | .1.3.6.1.4.1.2544.1.12.4.1.16.1.8 |
| bitsPortLineType This object represents the BITS Port Line Type.
Determines whether the T1/E1 BITS port operates in T1, E1,
or 2048kHz mode. | column | BitsPortLineType | .1.3.6.1.4.1.2544.1.12.4.1.16.1.9 |