cmFlowPointVlanMemberAction
CM-FACILITY-MIB ·
.1.3.6.1.4.1.2544.1.12.4.1.29.1.10
Object
column
r/w
FlowVlanActionType
This object allows to add or remove the VLAN members specified by cmFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmFlowPointVlanMemberActionVlan and then should specify cmFlowPointVlanMemberAction on whether to add/remove the specified VLAN member.
Context
- MIB
- CM-FACILITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.4.1.29.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cmFlowPointEntry
- Table
- cmFlowPointTable
- Siblings
- 43
Syntax
FlowVlanActionType
- Source
- FlowVlanActionType
- Base type
Enumeration
Values & Constraints
Type Values
1 | no-action |
2 | add-vlan |
3 | remove-vlan |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmFlowPointIndex The integer index value corresponding to an FlowPoint. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.1 |
| cmFlowPointVlanMemberActionVlan This object allows adding/removing VLAN members
to a flowpoint.
VLAN member is of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form … | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.29.1.11 |
| cmFlowPointIngressUntaggedFrameEnabled This object allows to specify whether or not the flowpoint
supports untagged frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.29.1.12 |
| cmFlowPointCTagControl This object allows specification of the tag management
operation on the C-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
th… | column | FlowTagControl | .1.3.6.1.4.1.2544.1.12.4.1.29.1.13 |
| cmFlowPointCTagVlanId This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of cmFlowPointIngressCTagControl.
It is applicable for 'push', 'swaptag', 'swapvid' and… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.4.1.29.1.14 |
| cmFlowPointCTagVlanPriority This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of cmFlowPointIngressCTagControl.
It is applicable for 'push' and 'swaptag' contr… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.4.1.29.1.15 |
| cmFlowPointSTagControl This object allows specification of the tag management
operation on the S-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
th… | column | FlowTagControl | .1.3.6.1.4.1.2544.1.12.4.1.29.1.16 |
| cmFlowPointSTagVlanId This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of cmFlowPointIngressSTagControl.
It is applicable for 'push', 'swaptag', 'swapvid' and… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.4.1.29.1.17 |
| cmFlowPointSTagVlanPriority This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of cmFlowPointIngressSTagControl.
It is applicable for 'push' and 'swaptag' contr… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.4.1.29.1.18 |
| cmFlowPointEgressOuterTagPrioMapEnabled This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag.
When Enabled,it indicates that the operation specified in the EgressPrioMapTable woul… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.29.1.19 |
| cmFlowPointCircuitName This object allows SNMP management entities to provide a
circuit identifier with the FlowPoint. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.29.1.2 |
| cmFlowPointColorMarkingSupported This object defines the egress color marking. If set to Enabled, the DEI bit of S-tag pushed
will be remarked according the meter result. If set to Disabled, the DEI bit is force… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.29.1.20 |
| cmFlowPointAssociatedAclProfile This object provides the association of an Flow with an ACL profile. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.29.1.21 |
| cmFlowPointSESFramesLossThresholdRatio This object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the flowpoint.
This functionality is applicable if the flowpo… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.22 |
| cmFlowPointStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.4.1.29.1.23 |
| cmFlowPointRowStatus The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.4.1.29.1.24 |
| cmFlowPointDefaultMemberEnabled defaultMemberEnabled with enabled means that on this FP,
the membership is all the tag packets without match any
other membership associated to the port. Untagged means
untagge… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.29.1.25 |
| cmFlowPointMcastRateLimitEnabled Whether multicast packets need be limited per FP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.29.1.26 |
| cmFlowPointMcastRateLimitSpeedLo The rate limiting for multicast packets per FP
When cmFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects onl… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.27 |
| cmFlowPointMcastRateLimitSpeedHi The rate limiting for multicast packets per FP
When cmFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects onl… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.28 |
| cmFlowPointBcastRateLimitEnabled Whether broadcast packets need be limited per FP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.29.1.29 |
| cmFlowPointAdminState This object represents the Administrative State of the FlowPoint. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.4.1.29.1.3 |
| cmFlowPointBcastRateLimitSpeedLo The rate limiting for broadcast packets per FP
When cmFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects onl… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.30 |
| cmFlowPointBcastRateLimitSpeedHi The rate limiting for broadcast packets per FP
When cmFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects onl… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.31 |
| cmFlowPointSplitHorizonGroupOID Specifies the Split-Horizon Group EID. If there is no SHG, the value is none. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.29.1.32 |
| cmFlowPointLoopAvoidance EID of this associated Loop Avoidance protocol entity.
A value of NONE indicates there is no loop avoidance protocol.
Currently ERP EID is filled when ELAN service is created. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.29.1.33 |
| cmFlowPointHierarchicalCosEnabled Enable or Disable Hierarchical COS shaping (flow shaping). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.29.1.34 |
| cmFlowPointWfqQid This attribute description the WFQ Qid. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.35 |
| cmFlowPointWfqOutPriority This attribute description the WFQ out priority. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.36 |
| cmFlowPointMaximumBWLo This attribute description the flow point maximum bandwidth.
This objects only represents low 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.37 |
| cmFlowPointMaximumBWHi This attribute description the flow point maximum bandwidth.
This objects only represents high 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.38 |
| cmFlowPointGuaranteedBWLo This attribute description the flow point guaranteed bandwidth.
This objects only represents low 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.39 |
| cmFlowPointOperationalState This object represents the Operational State of the FlowPoint. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.4.1.29.1.4 |
| cmFlowPointGuaranteedBWHi This attribute description the flow point guaranteed bandwidth.
This objects only represents high 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.40 |
| cmFlowPointRefPrioMapProfile This object allows to set priority map profile. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.29.1.41 |
| cmFlowPointMcastAndBcastRateLimitEnabled Whether multicast packets and broadcast packets need be limited per FP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.29.1.42 |
| cmFlowPointMcastAndBcastRateLimitSpeedLo The rate limiting for multicast packets and broadcast packets per FP
When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.43 |
| cmFlowPointMcastAndBcastRateLimitSpeedHi The rate limiting for multicast packets and broadcast packets per FP
When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.44 |
| cmFlowPointSecondaryState This object represents the Secondary State of the FlowPoint. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.4.1.29.1.5 |
| cmFlowPointAssociatedFlowId This object provides the association of an Flow with an FlowPoint. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.29.1.6 |
| cmFlowPointIngressMultiCOS This object allows specification of ingress multiple COS (Class of Service) FlowPoint. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.29.1.7 |
| cmFlowPointIngressCOS This object allows specification of ingress COS (Class of Service) FlowPoint. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.29.1.8 |
| cmFlowPointIngressVlanMemberList It allows specification of VLAN members of the FlowPoint.
VLAN members are comma separated, of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.29.1.9 |