cmOAMFlowPointVlanMemberActionVlan
CM-FACILITY-MIB ·
.1.3.6.1.4.1.2544.1.12.4.1.30.1.8
Object
column
r/w
OctetString
This object allows adding/removing VLAN members
to a oam flowpoint.
VLAN member is of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* (vlan X with all priorities),
*-Y (all vlans with priority Y), and X1:X2
(range of vlans from X1 to X2, all priorities).
Members with specific VLAN Id and
specific VLAN Priority are not supported.
In order to add/remove VLAN member to a flow, user must
specify this object with appropriate VLAN and then invoke
cmOAMFlowPointVlanMemberAction.
Context
- MIB
- CM-FACILITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.4.1.30.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cmOAMFlowPointEntry
- Table
- cmOAMFlowPointTable
- Siblings
- 11
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmOAMFlowPointIndex The integer index value corresponding to an OAMFlowPoint. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.30.1.1 |
| cmOAMFlowPointSESFramesLossThresholdRatio This object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the oam flowpoint.
This functionality is applicable if the oa… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.30.1.10 |
| cmOAMFlowPointStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.4.1.30.1.11 |
| cmOAMFlowPointRowStatus The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.4.1.30.1.12 |
| cmOAMFlowPointCircuitName This object allows SNMP management entities to provide a
circuit identifier with the OAMFlowPoint. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.30.1.2 |
| cmOAMFlowPointAdminState This object represents the Administrative State of the OAMFlowPoint. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.4.1.30.1.3 |
| cmOAMFlowPointOperationalState This object represents the Operational State of the OAMFlowPoint. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.4.1.30.1.4 |
| cmOAMFlowPointSecondaryState This object represents the Secondary State of the OAMFlowPoint. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.4.1.30.1.5 |
| cmOAMFlowPointIngressVlanMemberList It allows specification of VLAN members of the OAMFlowPoint.
VLAN members are comma separated, of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.30.1.6 |
| cmOAMFlowPointVlanMemberAction This object allows to add or remove the VLAN members specified by
cmOAMFlowPointVlanMemberActionVlan object. SNMP manager must first
configure the VLAN member to be added/removed… | column | FlowVlanActionType | .1.3.6.1.4.1.2544.1.12.4.1.30.1.7 |
| cmOAMFlowPointIngressUntaggedFrameSupported This object allows to specify whether or not the OAMFlowPoint
supports untagged frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.30.1.9 |