f3PulsePerSecondPortTimeSource
CM-FACILITY-MIB ·
.1.3.6.1.4.1.2544.1.12.4.1.53.1.15
Object
This object specify PPS port time source.
Context
- MIB
- CM-FACILITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.4.1.53.1.15- Type
- column
- Access
- readonly
- Status
- deprecated
- Parent
- f3PulsePerSecondPortEntry
- Table
- f3PulsePerSecondPortTable
- Siblings
- 15
Syntax
F3-SYNC-MIBTimeSource
- Source
- F3-SYNC-MIBTimeSource
- Base type
Enumeration
Values & Constraints
Type Values
1 | atomic |
2 | gps |
3 | ptp |
4 | internal |
5 | other |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3PulsePerSecondPortIndex An integer index value used to uniquely identify
this Pulse Per Second Port within the card. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.53.1.1 |
| f3PulsePerSecondPortDirection This object allows specification of the signal type
(i.e. input or output). | column | CM-COMMON-MIBSignalDirectionType | .1.3.6.1.4.1.2544.1.12.4.1.53.1.10 |
| f3PulsePerSecondPortInputRate This object allows specification of the PPS Input Rate. | column | PPSInputRate | .1.3.6.1.4.1.2544.1.12.4.1.53.1.11 |
| f3PulsePerSecondPortDelayCompensation This object allows specification of the PPS external Delay
Compensation in nanoseconds. The valid values are 0 to 96 in
8 nanoseconds steps. Values which are not multiple of 8 wi… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.53.1.12 |
| f3PulsePerSecondPortClockClass deprecated This object specify PPS port clock class. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.53.1.13 |
| f3PulsePerSecondPortClockAccuracy deprecated This object specify PPS port clock accuracy. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.53.1.14 |
| f3PulsePerSecondPortPhyInterfaceType This object specify PPS physical interface type. | column | PPSPhyInterfaceType | .1.3.6.1.4.1.2544.1.12.4.1.53.1.16 |
| f3PulsePerSecondPortIfIndex This object has the same value as ifIndex for
Pulse Per Second Port. An integer index value used to
uniquely identify this Pulse Per Second Port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2544.1.12.4.1.53.1.2 |
| f3PulsePerSecondPortEntityIndex Entity Index from ENTITY-MIB for this port. | column | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.2544.1.12.4.1.53.1.3 |
| f3PulsePerSecondPortAdminState This object represents the Administrative State of the Pulse Per Second
Port. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.4.1.53.1.4 |
| f3PulsePerSecondPortOperationalState This object represents the Operational State of the Pulse Per Second
Port. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.4.1.53.1.5 |
| f3PulsePerSecondPortSecondaryState This object represents the Secondary State of the Pulse Per Second
Port. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.4.1.53.1.6 |
| f3PulsePerSecondPortSquelchControl This object allows to set the Squelch Control for the Pulse Per Second port.
The Squelch Control is used to determine the type of squelch control
used to squelch the output of t… | column | F3-SYNC-MIBSquelchControl | .1.3.6.1.4.1.2544.1.12.4.1.53.1.7 |
| f3PulsePerSecondPortSquelchQL This object allows to set the Squelch QL for the Pulse Per Second port.
This value is used when f3PulsePerSecondPortSquelchControl is squelch-ql.
The Squelch QL is used to determ… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.53.1.8 |
| f3PulsePerSecondPortTODSource This object allows to set the Pulse Per Second Source for the Port. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.4.1.53.1.9 |